15d311ec18
x86/alix2: switch to 3.8
...
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36252
2013-04-07 15:53:09 +00:00
9d05b1b683
x86/alix2: add config for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
2013-04-07 15:53:08 +00:00
89f690843f
x86: add support for 3.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36250
2013-04-07 15:53:05 +00:00
d1f28c6d1f
ramips: add nor-flash node for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
2013-04-07 14:46:11 +00:00
0c3c29ca38
ramips: fix pinmux settings for the RT-N56U
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
2013-04-07 14:46:10 +00:00
66fbe78a93
ramips: pinmux fixes
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
2013-04-07 14:46:09 +00:00
aedf05caa0
ramips: remove trailing whitespaces from dts files
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
2013-04-07 13:32:37 +00:00
017aabe292
ramips: handle PCI interrupts in plat_irq_dispatch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
2013-04-07 13:25:38 +00:00
811f7f9f2d
fix typos inside dts files
...
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
2013-04-07 11:47:03 +00:00
709b19ed9f
fix default commandline in dts files
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
2013-04-07 11:46:54 +00:00
85675528da
ramips: add cfi_cmdset_0002 patches
...
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
2013-04-07 11:37:15 +00:00
fde143b66f
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36241
2013-04-07 11:24:30 +00:00
10d8e4b66c
ramips: remove top-level {address,size}-cells properties from .dts files
...
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
2013-04-07 08:19:10 +00:00
4a46687d25
brcm47xx: use old partition names again for kernel 3.8
...
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
SVN-Revision: 36235
2013-04-06 22:22:26 +00:00
204bde8d98
brcm47xx: fix error in board detection when nvram is not available.
...
SVN-Revision: 36234
2013-04-06 19:02:25 +00:00
d45ef216e6
linux/3.8: implement pcibios_get_phb_of_node for MIPS
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36233
2013-04-06 17:33:03 +00:00
51fa28e2c2
linux/3.8: backport devm_ioremap_resource from 3.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36232
2013-04-06 17:33:00 +00:00
756b810178
ramips: fix ethernet switch node in DIR-645.dts
...
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
2013-04-06 17:19:35 +00:00
747b795b56
generic: rtl8367: add compatible string with vendor prefix
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36230
2013-04-06 17:19:31 +00:00
f5d8d80ca9
generic: rtl8367b: fix rtl8367b_extif_init_of
...
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
32d3b456f0
linux/3.8: add more missing symbols
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36228
2013-04-06 16:56:47 +00:00
89539462a8
linux/3.8: add missing symbol
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36226
2013-04-06 16:38:36 +00:00
1ef39b43dd
ramips: remove spi node from RTN56.dts
...
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
d57e662cda
ramips: fix ethernet switch node in RTN56U.dts
...
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
4becd8590c
ramips: rt3883: enable the RTL8367 driver
...
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
38bd9b4337
generic: rtl8367: allow to load extif config from OF
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
585d19d168
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
68c931c637
generic: rtl8367: add vendor prefix to the compatible string
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36218
2013-04-06 12:37:32 +00:00
348640f4b3
ramips: rt3883: sync 3.8 config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
d16de0b69f
fix typo pinmmux -> pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
f78c902cfd
kernel: update linux 3.8 to 3.8.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
202fb45deb
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36214
2013-04-06 11:40:41 +00:00
df7af06f1f
fix dir-615 h1 network config
...
http://patchwork.openwrt.org/patch/3527/
Signed-off-by: Daniel Petre <dani@ip6.ro>
SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
e1a74d8ff7
fix typo that made gpiomuxing fail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
495296bba9
malta: add le64 and be64 sub targets
...
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36211
2013-04-05 12:36:48 +00:00
12b925dcbf
malta: move 32-bits options to subtarget config
...
Preliminary change to add support for MIPS64-based malta subtargets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36210
2013-04-05 12:36:45 +00:00
5eb8ba7f19
malta: move endianness kernel configuration to subtarget
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36209
2013-04-05 12:36:41 +00:00
46dfa04a08
malta: enable mips16 feature flag
...
The malta platform supports mips16 advertise this feature flag.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36203
2013-04-05 12:36:16 +00:00
d9bb7ff7a5
Migrate lantiq platform to common led helper functions
...
http://patchwork.openwrt.org/patch/3316/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
a4c745ee74
add a missing patch that makes board detection work again
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
c838ec2391
Patch for invoking (pre)init
...
http://patchwork.openwrt.org/patch/3485/
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 36183
2013-04-03 10:00:50 +00:00
93899a1329
add profile for tenda w150m board
...
http://patchwork.openwrt.org/patch/3371/
Signed-off-by: Chi Zhang <zhangchi866@gmail.com>
SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
7e54357bd5
fix ALL5002 default package selection
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36175
2013-04-03 10:00:16 +00:00
37401dca92
Build WW factory image for DAP-1350
...
http://patchwork.openwrt.org/patch/3466/
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36174
2013-04-03 10:00:12 +00:00
910b705155
add Huawei D105
...
http://patchwork.openwrt.org/patch/3510/
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
c1710901c5
add profile for the Edimax 3g-6200NL board
...
http://patchwork.openwrt.org/patch/3214/
Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>
SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
f3643374c4
there is no ttyS1 console
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36171
2013-04-03 09:59:59 +00:00
99e0ff1123
make v3.8 the default
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36170
2013-04-03 09:59:55 +00:00
c8d5f5e0ef
add new image/Makefile
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36169
2013-04-03 09:59:51 +00:00
770b28f146
add the dts files that describe the boards in future
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36168
2013-04-03 09:59:46 +00:00
2328e8389e
fix upvel profile names
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36167
2013-04-03 09:59:41 +00:00
94972a5268
fix rt3883 config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36166
2013-04-03 09:59:37 +00:00
0716ae8abe
fix rt305x config-3.8
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36165
2013-04-03 09:59:33 +00:00
dce4945972
mark rt288x broken until the test hardware arrives in the mail
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36164
2013-04-03 09:59:16 +00:00
46f141637c
add patches for v3.8
...
Signed-off-by: John Crsipin <blogic@openwrt.org>
SVN-Revision: 36163
2013-04-03 09:59:10 +00:00
4f86ea43ca
remove old ralink 3.8 patches
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36162
2013-04-03 09:58:48 +00:00
d4db00205d
move files to files-3.7
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36161
2013-04-03 09:58:44 +00:00
86a691144b
add feature gpio
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36160
2013-04-03 09:58:37 +00:00
1105bd2897
add OF support to rtl8367b driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36159
2013-04-03 09:58:33 +00:00
cc34858d4a
make firmware loading work on v3.9
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36158
2013-04-03 09:58:28 +00:00
72f5901eb1
mpc85xx: enable ath9k and wpad-mini by default
...
SVN-Revision: 36142
2013-04-01 09:53:29 +00:00
98ef9e5411
brcm47xx: generate images for Linksys E.... models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36139
2013-03-27 15:51:28 +00:00
b4eabad019
gemini: remove usage of ehci_port_power() it was removed in kernel 3.8
...
SVN-Revision: 36138
2013-03-27 15:48:07 +00:00
31c9452120
brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
...
SVN-Revision: 36137
2013-03-27 15:35:52 +00:00
a9e5a178ef
brcm47xx: generate images for more WRT...N models
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36136
2013-03-27 15:34:55 +00:00
b92e750027
upgrade to 3.9-rc4, disable unsupported boards
...
SVN-Revision: 36128
2013-03-25 14:18:32 +00:00
c90078ce87
refresh patches against -rc4
...
SVN-Revision: 36127
2013-03-25 13:53:48 +00:00
f26378fd7c
add missing symbols
...
SVN-Revision: 36126
2013-03-25 13:53:17 +00:00
f7da2127ab
ar71xx: fix ethernet LEDs on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36122
2013-03-25 06:40:03 +00:00
39c132d154
ar71xx: add GPIO output select values for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36121
2013-03-25 06:40:00 +00:00
849201b1d8
ar71xx: add default LED configuration for the WL-WRD3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36120
2013-03-24 21:07:21 +00:00
cd5cca4ba8
ar71xx: fix USB power GPIO on the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36119
2013-03-24 19:23:47 +00:00
4daefc9480
ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36118
2013-03-24 19:23:45 +00:00
a4a2a7189f
ar71xx: add diag support for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36117
2013-03-24 19:23:43 +00:00
38c991311b
ar71xx: add default switch configuration for the TL-WDR3500
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36116
2013-03-24 19:23:36 +00:00
bb81e695f9
kernel: add missing config options for au1000 target
...
SVN-Revision: 36115
2013-03-24 14:01:38 +00:00
18c47be19a
kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
...
SVN-Revision: 36102
2013-03-21 14:56:04 +00:00
4995f23669
kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected
...
This was turned from a silent confg option without a text to a normal
config option which could be selected without any other option
depending on this. This could cause the situation where REGMAP_SPI was
selected without SPI_MASTER being selected.
SVN-Revision: 36101
2013-03-21 14:50:59 +00:00
d5cf67297a
brcm47xx: generate images for some more devices
...
These devices should be supported by trunk now.
SVN-Revision: 36099
2013-03-20 22:01:18 +00:00
c9544f4af0
kernel: add some fixes for kernel 3.9
...
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.
SVN-Revision: 36098
2013-03-20 21:59:24 +00:00
99638c5288
kernel: add some missing config options for kernel 3.9
...
SVN-Revision: 36097
2013-03-20 21:53:51 +00:00
b1cc7a90a4
kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection ( #13193 )
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36091
2013-03-19 14:13:39 +00:00
fe157ea1ba
uml: remove 3.6 kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36080
2013-03-17 19:47:04 +00:00
1898218119
uml: remove 3.3. kernel patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36079
2013-03-17 19:46:59 +00:00
c36db5f66a
uml: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36078
2013-03-17 19:46:54 +00:00
a987d1aaa3
uml: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36077
2013-03-17 19:46:49 +00:00
499f92c3db
uml: remove 3.2 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36076
2013-03-17 19:46:43 +00:00
ce33aaafcf
ep93xx: switch to 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36075
2013-03-17 19:46:37 +00:00
a5551d366a
kernel: refresh 3.9 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36074
2013-03-17 19:46:32 +00:00
472bb8d51a
ep93xx: add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36073
2013-03-17 19:46:25 +00:00
743e9e7009
ep93xx: account for sound soc directory rename in 3.7
...
sound/soc/ep93xx -> sound/soc/cirrus
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36071
2013-03-17 19:45:55 +00:00
6a7100c760
kernel: set regmap-core module license
...
Fixes the following issues:
[ 7.660000] regmap_core: module license 'unspecified' taints kernel
[ 7.690000] Disabling lock debugging due to kernel
[ 7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[ 7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[ 7.720000] regmap_core: Unknown symbol devres_add (err 0
[ 7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[ 7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[ 7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[ 7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[ 7.780000] regmap_core: Unknown symbol devres_free (err 0
[ 7.800000] regmap_core: Unknown symbol devres_find (err 0
[ 7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36070
2013-03-17 19:45:48 +00:00
7987c8d0dc
au1000: remove support for 3.3. kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36067
2013-03-17 14:33:47 +00:00
c56c18168e
au1000: switch to 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36066
2013-03-17 14:33:41 +00:00
5592a619d0
au1000: keep the MTX-1 watchdog pin low during boot
...
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36065
2013-03-17 14:33:36 +00:00
d5c2e83fa5
ep93xx: remove 3.3 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36064
2013-03-17 14:33:23 +00:00
9cef30a519
mcs814x: use devm_request_and_ioremap in mcs814x-rng driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36063
2013-03-17 14:33:18 +00:00
8ed2299646
mcs814x: use devm_request_and_ioremap helper for nuport_mac driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36062
2013-03-17 14:33:13 +00:00
8bc84bac31
mcs814x: remove PCI code
...
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36061
2013-03-17 14:33:07 +00:00
a9ef927cce
mcs814x: implement MULTI_IRQ_HANDLER
...
Allows us to get rid of the IRQ entry point assembly
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36060
2013-03-16 22:25:47 +00:00
Gabor Juhos
John Crispin
Felix Fietkau
Hauke Mehrtens
Florian Fainelli
Imre Kaloz