5e84df6bac
base-files: ship a static initial shadow db instead of creating it from passwd with sed, this fixes registering of users at compile time
...
SVN-Revision: 32064
2012-06-05 17:48:41 +00:00
a044a43d06
base-files: make user_add() populate the shadow db as well
...
SVN-Revision: 32063
2012-06-05 17:40:32 +00:00
9ae901445b
/etc/functions.sh => /lib/functions.sh
...
SVN-Revision: 32062
2012-06-05 16:04:23 +00:00
eca7502dfd
base-files: add LED specific functions to /lib/functions/uci-defaults
...
SVN-Revision: 31991
2012-05-29 16:39:16 +00:00
8a9e94b077
base-files: remove base-files-network, netifd is the only supported option now
...
SVN-Revision: 31980
2012-05-29 12:59:03 +00:00
c11151bc70
base-files: add network_is_up()
...
SVN-Revision: 31978
2012-05-29 02:03:25 +00:00
bf52cbf108
base-files: let network_get_device() return the l3 interface, introduce network_get_physdev() to obtain the underlying iface (if applicable)
...
SVN-Revision: 31960
2012-05-29 00:20:16 +00:00
8ef9450b37
base-files: add network_get_device() to network.sh
...
SVN-Revision: 31937
2012-05-28 03:24:56 +00:00
f1d04190c5
base-files: introduce /lib/functions/network.sh This file will contain common procedures to deal with network interfaces. Initially provides network_get_ipaddr(), network_get_ipaddr6(), network_get_subnet() and network_get_subnet6() to determine the primary IP addresses or subnets of a given logical interface.
...
SVN-Revision: 31935
2012-05-28 03:15:02 +00:00
166db84309
base-files: kill ubusd and udhcpc on sysupgrade as well
...
SVN-Revision: 31852
2012-05-23 21:54:12 +00:00
5d6628a88c
base-files: allow sysupgrade to kill netifd, fixes pppd shutdown on upgrade
...
SVN-Revision: 31851
2012-05-23 21:49:31 +00:00
6aec1d72c2
package/base-files: copy /lib/functions.sh to the ramfs on sysupgrade
...
SVN-Revision: 31842
2012-05-23 21:05:20 +00:00
5eed1d8f6b
enable netifd by default and add its config variable to PKG_CONFIG_DEPENDS in a few relevant places
...
SVN-Revision: 31730
2012-05-14 23:33:35 +00:00
80650c9475
base-files: wait for wifi modules to settle
...
On slower devices wifi drivers might take too long for detecting
devices, resulting in the wifi detect call not seeing them.
This was observed on a bcm6348 with bcm4318 wifi. Adding a one second
pause was enough for b43 to expose the device.
SVN-Revision: 31639
2012-05-06 21:25:42 +00:00
232b7aa65b
remove special treatment when using glibc - support got dropped
...
SVN-Revision: 31504
2012-04-28 22:24:16 +00:00
334fd4199b
purge support for glibc - use eglibc instead!
...
for reference: http://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg13425.html
SVN-Revision: 31503
2012-04-28 22:24:12 +00:00
129afe12b7
base-files: fix typo in 05_firstboot_skip script ( #11359 )
...
SVN-Revision: 31492
2012-04-27 16:49:16 +00:00
3678ba60ca
base-files: rename internal variables in config_foreach to make namespace conflicts more unlikely
...
SVN-Revision: 31431
2012-04-21 20:34:45 +00:00
3c4165a305
enable ntpd server for busybox
...
hi
Another version, in this one the enable_server option is in the timeserver ntp part of the "system" config file
You can patch trunk and bacfire (tested both)
You can put busybox ntpd in client mode (if you put server), in client & server (by putting enable_server to 1, ntpd listen to udp 123), and also in server mode only (if you didn't put any servers in the config and still put enable_server 1, ntpd will answer with the time of the router)
I've replaced "config_foreach getpeers timeserver" with "config_get peers ntp server" because we want ntp timeserver, not random ones (to pre-answer if someone want to say that it's intrusive ...)
Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
Le 27/03/2012 20:41, Etienne Champetier a écrit :
> I've now tested my trunk patch and it works fine
> But I still can't find were $PROG is defined (is this a mistake, or some sort of built in variable???)
> (I've made some grep and nothing)
>
> Le 23/03/2012 02:19, Philip Prindeville a écrit :
>> Maybe:
>>
>> [ -n "$PROG" -a -x "$PROG" ] || return 1
>>
>> instead?
>>
>>
>> On 3/22/12 4:34 PM, Etienne Champetier wrote:
>>> Hi
>>>
>>> The 2 attached patchs (trunk & bacfire) add busybox ntpd enable_server option, as busybox ntpd server is compiled by default.
>>> We only need 1 client/server daemon (olipro patch was launching 2 daemons)
>>> I've fully tested the bacfire patch, and as i don't have a running openwrt trunk i'm not sure for the trunk patch (i'm sure about my modifications, but i'm not sure about "[ -x $PROG ] || return 1", as "$PROG" isn't defined ?!)
>>>
>>> Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
>>>
>>>
>>> Le 16/01/2012 01:57, Philip Prindeville a écrit :
>>>> On 1/14/12 11:37 AM, Olipro wrote:
>>>>> On Saturday 14 Jan 2012 02:45:59 Philip Prindeville wrote:
>>>>>> Don't we already have a 'disabled' option? Now we're adding an
>>>>>> 'enable_server' option?
>>>>>>
>>>>>> That seems confusing for no useful reason.
>>>>>>
>>>>> have you bothered to read what I originally wrote? your response would make
>>>>> me inclined to believe that you didn't.
>>>>>
>>>>> currently the ntpd initscript only runs it as a CLIENT - this patch enables
>>>>> you to have one instance running as a client and another as a SERVER that
>>>>> other hosts can synchronise with.
>>>>>
>>>>> Or perhaps I'm misunderstanding, what would you propose for allowing the
>>>>> built-in busybox ntpd to be utilised as a server? a separate init script
>>>>> entirely perhaps?
>>>> Or separate config sections... instead of 'config ntp' have 'config ntp-server' and 'config ntp-client'.
>>>>
>>>> -Philip
>>>>
>>>>
>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel@lists.openwrt.org
>>>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel@lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel@lists.openwrt.org
> https://lists.openwrt.org/mailman/listinfo/openwrt-devel
SVN-Revision: 31374
2012-04-20 15:05:38 +00:00
b4312a8ba1
base-files: reformat banner to better work with varying version string lengths, do not set image options if menu is disabled ( #11280 )
...
SVN-Revision: 31289
2012-04-15 15:21:55 +00:00
d8540259ca
base-file: cleanup white space in Kconfig source
...
SVN-Revision: 31267
2012-04-12 23:01:39 +00:00
a43ae30e1b
include, base-files, opkg: introduce version configuration to override the embedded version info of generated images - Introduce new Kconfig symbols VERSION_DIST, VERSION_NICK, VERSION_NUMBER and VERSION_REPO to specify distribution, release name, version and repository for a given build - Introduce include/version.mk to provide common helpers for packages dealing with versions - Make opkg use version.mk to populate the opkg.conf template - Make base-files use version.mk to populate /etc/openwrt_version, /etc/openwrt_release and /etc/banner
...
The available placeholders are:
%D .. Replace with $(CONFIG_VERSION_DIST), default to "OpenWrt"
%d .. Like %D, but all characters made lowercase and spaces substituted with "_" (e.g. "openwrt")
%N .. Replace with $(CONFIG_VERSION_NICK), default to the build tree release (e.g. "Attitude Adjustment")
%n .. Like %N, but all characters made lowercase and spaces substituted with "_" (e.g. "attitude_adjustment")
%V .. Replace with $(CONFIG_VERSION_NUMBER), default to the build tree release (e.g. "r31262")
%v .. Like %V, but all characters made lowercase and spaces substituted with "_"
%C .. Replace with $(CONFIG_VERSION_NUMBER), default to "Bleeding Edge"
%c .. Like %C, but all characters made lowercase and spaces substituted with "_" (e.g. "bleeding_edge")
%U .. Replace with $(CONFIG_VERSION_REPO), default to "http://downloads.openwrt.org/snapshots/trunk/%T/packages "
%R .. Replace with the current build tree revision (e.g. "r31262" or "75488c4a05b8033cf69e91874a61852db7ba9c6c")
%T .. Replace with the current target (e.g. "ar71xx")
%S .. Replace with the current target/subtarget combo (e.g. "adm5120/router_le")
SVN-Revision: 31262
2012-04-12 17:31:16 +00:00
3c3941f109
base-files: remove network preconfig, it collides with ar71xx network firstboot uci-defaults To supply custom network settings, it is better to embed a complete network config file using the files/ overlay, the old image lan preconfig options are also very limited in scope and actually collide with sysupgrade and firstboot hardware detection on at least ar71xx and possibly other targets, therfore drop this facility.
...
SVN-Revision: 31258
2012-04-12 09:43:44 +00:00
6f46704743
base-files: split service related functions off to /lib/functions/service.sh
...
SVN-Revision: 31042
2012-03-20 14:29:50 +00:00
5fdd1f4bd7
Add munin to /etc/services
...
The muninlite postinst fails to add munin to /etc/services.
This patch removes this broken postinst and add an entry for munin in
/etc/services. This should have been done when the rest of the
/etc/services postinsts were being removed (changesets 26142-26149).
Signed-off-by: Jonathan McCrohan <jmccrohan@gmail.com>
SVN-Revision: 30982
2012-03-18 19:41:57 +00:00
5744d736f2
base-files: remove old coldplugging hacks that are no longer necessary since the new main hotplug2 instance calls udevtrigger as well
...
SVN-Revision: 30916
2012-03-13 09:18:30 +00:00
086cae30ce
base-files: enable conntrack accounting in sysctl. It used to be a compile time option which got deprecated
...
SVN-Revision: 30805
2012-03-04 14:53:17 +00:00
6c61d7cbf1
base-files: remove trailing whitespaces from lib/functions/boot.sh
...
SVN-Revision: 30776
2012-03-02 11:17:30 +00:00
8ae051799a
base-files: remove trailing whitespaces from lib/functions.sh
...
SVN-Revision: 30775
2012-03-02 11:17:29 +00:00
6b9bf71881
base-files: add a uci-defaults script which will migrate the root password to /etc/shadow if needed
...
SVN-Revision: 29865
2012-01-22 22:25:42 +00:00
a963a80a38
base-files: the initial hotplug2 instance sometimes misses a few relevant events, e.g. during module load. rerun udevtrigger for the final hotplug2 instance to fix this
...
SVN-Revision: 29862
2012-01-22 21:14:22 +00:00
9fd3886365
base-files: do not pass --set-worker /lib/hotplug2/worker_fork.so to hotplug2 anymore, its statically linked - patch by Viktar Palstsiuk <viktar.palstsiuk@promwad.com>
...
SVN-Revision: 29806
2012-01-19 15:37:47 +00:00
4e88bcfb00
base-files: implement a --force option for sysupgrade to override image checks, useful to upgrade old ar71xx installations to current trunk ones
...
SVN-Revision: 29688
2012-01-08 15:30:37 +00:00
ff89832fdb
package/base-files: add support for the switch LED trigger
...
SVN-Revision: 29629
2011-12-31 15:02:35 +00:00
3f85c52a3a
package/base-files: use case statement in led init script
...
SVN-Revision: 29628
2011-12-31 15:02:32 +00:00
1c6821b42e
base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
...
SVN-Revision: 29587
2011-12-20 17:25:15 +00:00
561f4d2840
base-files: add lib/functions/uci-defaults.sh
...
SVN-Revision: 29384
2011-12-01 22:48:46 +00:00
d46e17548b
base-files: kill remaining processes after running user hooks ( #10461 )
...
SVN-Revision: 29256
2011-11-19 16:50:25 +00:00
010e58d209
base-files: another empty password check fix ( #10440 )
...
SVN-Revision: 29208
2011-11-17 09:40:06 +00:00
33443d2a8c
base-files: now that we have date -k, adjust the kernel timezone after setting up TZ and localtime
...
SVN-Revision: 29204
2011-11-17 01:18:22 +00:00
6d80ce78f1
base-files: rewrite killing of nonessential services to not rely on top, use the proc filesystem only
...
SVN-Revision: 29187
2011-11-16 15:01:18 +00:00
8b20bfafdf
base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly. Solves broken key based dropbear login with empty password after r28935.
...
SVN-Revision: 29130
2011-11-14 19:02:01 +00:00
b49aed1520
package/base-files: enhance service functions
...
* allow matching process by name (useful for processes changing it)
* check if first argument is executable
* fix function name used in error messages
SVN-Revision: 28991
2011-11-12 13:53:15 +00:00
20ff304ed9
base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again
...
SVN-Revision: 28943
2011-11-11 13:25:31 +00:00
28039aea90
nuke another 2.4 skeleton
...
SVN-Revision: 28937
2011-11-10 13:39:06 +00:00
7944b6fa32
enable and use shadow passwords by default
...
SVN-Revision: 28936
2011-11-10 12:55:01 +00:00
55ac529951
the empty root password should be empty ;)
...
SVN-Revision: 28935
2011-11-10 12:47:50 +00:00
be49daffc8
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
...
SVN-Revision: 28933
2011-11-10 12:16:41 +00:00
f371d516bf
package/base-files: /lib/functions.sh: add {group,user}_{add,exists} functions
...
SVN-Revision: 28871
2011-11-09 00:23:58 +00:00
62a2827ea7
package/base-files: /lib/functions.sh: let service_stop exit early if no matching process to stop where found
...
SVN-Revision: 28870
2011-11-08 23:35:13 +00:00
b7b56df707
package/base-files: enhance & cleanup service wrappers
...
* add service_check function for checking if a process is alive
* add service_signal for sending arbitrary signals to a process
* change service_stop to send a TERM signal first, wait for the process to die and send a KILL signal if it doen't
* have service_kill print a warning on STDERR stating it has been deprecated
SVN-Revision: 28865
2011-11-08 22:47:49 +00:00
d0659ce37e
package/base-files: move service* functions from /etc/rc.common to /lib/functions.sh
...
SVN-Revision: 28864
2011-11-08 22:47:41 +00:00
7e3b6aa1f1
base-files: do not kill udhcpc on sysupgrade, it will tear down the interface if terminated
...
SVN-Revision: 28863
2011-11-08 19:14:55 +00:00
daca6a6a97
base-files: do not assume that "top" is busybox' top, but try to call the applet explicitely
...
SVN-Revision: 28862
2011-11-08 18:48:38 +00:00
a73fffe857
base-files: properly handle wifi ifaces with no network attached, useful for unmanaged interfaces like used for batman or monitoring
...
SVN-Revision: 28860
2011-11-08 14:42:58 +00:00
b6aef59ea8
package/base-files: move /etc/functions.sh to /lib/functions.sh
...
SVN-Revision: 28857
2011-11-08 14:14:29 +00:00
93886bc776
package/base-files: use new service wrapper
...
SVN-Revision: 28835
2011-11-07 22:58:34 +00:00
10a03275bf
package/base-files: /etc/rc.common: add service wrapper around start-stop-daemon
...
SVN-Revision: 28834
2011-11-07 22:58:27 +00:00
8413e90418
package/base-files: /etc/passwd: fix uid number for user 'daemon' (conflicting with user 'nobody')
...
SVN-Revision: 28799
2011-11-07 11:02:55 +00:00
248ab4ac2f
base-files: process platform hotplug calls in the early launch of hotplug2 to avoid having crda calls get stuck at boot time ( fixes #10350 , #10354 )
...
SVN-Revision: 28768
2011-11-05 17:16:01 +00:00
dab5ebaa76
netifd: ensure that a bridge gets created before hostapd needs it, hostapd must not attempt to create the bridge by itself
...
SVN-Revision: 28745
2011-11-04 01:05:12 +00:00
44ba13b578
base-files: load modules early, run wifi detect afterwards and only then process uci defaults
...
this allows uci-defaults scripts to override wifi settings
SVN-Revision: 28733
2011-11-03 20:02:25 +00:00
e3daeabda3
base-files: add some more protected services to sysupgrade kill blacklist
...
SVN-Revision: 28732
2011-11-03 19:25:25 +00:00
ef6d7a7e33
base-files: fix typo
...
SVN-Revision: 28681
2011-10-30 15:48:14 +00:00
52e93e54bc
base-files: sysupgrade: kill all but essential processes before starting the update
...
SVN-Revision: 28626
2011-10-27 16:52:31 +00:00
4cc48089c7
base-files/sysupgrade: add more busybox applet symlinks to ramdisk
...
Adds symlinks for printf and wc to make life happier in the sysupgrade ramdisk.
Also make code more readable by escaping that overly long line.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 28616
2011-10-27 07:54:49 +00:00
272d95f0f1
base-files: remove rdate integration, add busybox ntpd init script and server list in /etc/config/system The rdate applet proved to be too unreliable to obtain the current time on boot: - public time servers are rare and often unreachable or overloaded - rdate does not daemonize, it needs a network connection the moment it is started, leading to race conditions - the /etc/config/timeserver configuration is overly complex and there is no reliable way to disable rdate invocations - the time protocol as specified in RFC 868 is considered obsolete This commit adds an init script /etc/init.d/sysntpd which starts and stops the busybox ntpd accordingly. The builtin ntpd can be disabled by either disabling the init script, removing the symlink to busybox or by clearing the timeserver list in /etc/config/system.
...
SVN-Revision: 28612
2011-10-27 00:21:53 +00:00
55aeabae10
add an initial (experimental) version of netifd, disabled by default
...
SVN-Revision: 28499
2011-10-21 01:47:49 +00:00
c2b5767572
base-files: move network related scripts to a separate package to make the transition to netifd easier
...
SVN-Revision: 28495
2011-10-20 15:01:06 +00:00
59c13202e0
base-files: introduce "igmp_snooping" option to toggle IGMP snooping on bridge interfaces
...
SVN-Revision: 28412
2011-10-11 13:43:08 +00:00
bfbbe5893f
base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
...
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
4246c6a6b5
base-files: apply network interface settings such as macaddr, mtu and txqueuelen in prepare_interface instead of setup_interface. setting the mtu after the interface is up is unreliable on some drivers such as gianfar
...
SVN-Revision: 28297
2011-09-24 20:34:17 +00:00
41838f4585
base-files: make ip matching in dns add/remove functions more explicit, avoids overmatching pairs like 1.2.3.35 and 1.2.3.3
...
SVN-Revision: 28291
2011-09-23 08:35:50 +00:00
98372a8eb5
base-files: Fix IPv6 address and route adding on aliases with no IPv4 address configured
...
SVN-Revision: 28241
2011-09-14 13:37:44 +00:00
200fd7bce1
Revert "[package] base-files: Add support for assigning multiple IPv6 addresses on an interface"
...
Multiple IPv6 addresses should be handled with alias sections
SVN-Revision: 28240
2011-09-14 13:37:40 +00:00
718c8ab940
base-files: Add support for assigning multiple IPv6 addresses on an interface
...
SVN-Revision: 28222
2011-09-12 21:07:00 +00:00
dea36724a4
base-files: remove an old network tunable tweak which is messing up network stack performance on modern systems
...
SVN-Revision: 28126
2011-08-29 23:34:11 +00:00
aab33e2e9a
base-files: fix arp() procedure to properly detect /usr/bin/arp
...
SVN-Revision: 27965
2011-08-12 14:34:39 +00:00
8ff7756e82
base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
...
SVN-Revision: 27797
2011-07-27 09:02:10 +00:00
94c728dc39
base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
...
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
365f76551a
base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
...
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763 .
SVN-Revision: 27720
2011-07-22 00:21:20 +00:00
0de28706ca
base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699 .
...
SVN-Revision: 27653
2011-07-17 17:10:30 +00:00
1e34c02e3e
base-files: add -h and --help options to sysupgrade ( #9728 )
...
SVN-Revision: 27630
2011-07-17 09:27:14 +00:00
e0e6d1029e
base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars ( #9711 )
...
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
1f69f4cf64
base-files: preinit: Fixed sourcing of diag.sh in /etc/preinit. This caused errors due to frequent use of /proc/cpuinfo to determine board name to pick led layout. Now diag.sh (which only defines set_state and any helper functions) is sourced by a proper preinit function during preinit_main, which is after /proc has been brought up, unlike in /etc/preinit
...
SVN-Revision: 27501
2011-07-07 02:52:02 +00:00
32731a72c2
base-files: pass conloglevel to syslogd ( #9463 , #9647 )
...
SVN-Revision: 27400
2011-07-03 15:11:58 +00:00
0a7a73261a
base-files: do not use the relinked libgcc, fixes c++ exception handling issues ( #9185 )
...
SVN-Revision: 27347
2011-07-02 06:50:15 +00:00
28fbd7470d
add gfortran compiler support ( #9600 , patch from Xiangfu Liu via Qi hardware)
...
SVN-Revision: 27262
2011-06-23 11:46:24 +00:00
344445715a
base-files: assume a default ipv6 prefix size of /64, thats what the majority of users mean when they just specify an ip address
...
SVN-Revision: 27147
2011-06-09 12:36:30 +00:00
fd8ec24187
base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
...
SVN-Revision: 27145
2011-06-09 12:25:48 +00:00
97ee10d691
base-files: fix error reporting for unsupported protocols on virtual interfaces
...
SVN-Revision: 27132
2011-06-07 23:25:43 +00:00
9a227d88dd
base-files: do not write to /etc/config/wireless at boot time unless a new interface was found
...
eliminates unnecessary flash write cycles at every boot
patch by Peter Wagner (tripolar)
SVN-Revision: 27127
2011-06-07 17:00:43 +00:00
60f66ded72
base-files: make the MAC address of bridge interfaces sticky to avoid ARP issues on wifi re-configuration
...
SVN-Revision: 26990
2011-05-24 09:31:37 +00:00
9b8a5e604a
base-files: mark /etc/crontabs/ as config directory
...
SVN-Revision: 26986
2011-05-24 09:27:23 +00:00
ed8f726dab
ipcalc.sh CIDR notation Hi,
...
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
SVN-Revision: 26930
2011-05-18 09:50:06 +00:00
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
3b1b49a49b
base-files: fix a typo in etc/banner
...
SVN-Revision: 26841
2011-05-07 09:23:33 +00:00
ff4203b9bd
base-files: cleanup permissions of device files in common hotplug rules ( #9211 )
...
SVN-Revision: 26808
2011-05-03 19:37:59 +00:00
144bee2090
base-files: fix stale space in eglibc library install section ( #9270 )
...
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
2f6361832e
base-files: return success on lib-copying with external toolchain when using an external toolchain the base-files package copies libc, libgcc and others from the library directory.
...
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
2011-04-12 20:37:43 +00:00
980190367c
base-files: Use -h instead of deprecated -L for symlink check
...
SVN-Revision: 26485
2011-04-05 15:09:43 +00:00
48465d3d63
base-files: fix minor problem in init.d/boot
...
The script tests for the existance of /dev/root with test -e which fails if
/dev/root is a dangling symlink making the call to ln fail.
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
SVN-Revision: 26483
2011-04-05 15:09:32 +00:00
d5542b4f59
block-mount base-files: Added additional check to pi_include to ensure that a directory used with pi_include actually contains files matching the souring pattern because if not the shell dies due to an empty string in for statement. Added /lib/functions/fsck as an empty dir to block-mount. This combination fixes a warning which generates a lot of bug reports, without panicking the kernel like the last attempt.
...
SVN-Revision: 26479
2011-04-05 12:12:57 +00:00
e4e63b9c1b
base-files: bridge config, avoid having a random ipv6 ll address
...
So far, we are setting the bridge interface up before having added any
bridge interface ports. This results in the bridge assigning a random
mac address to its bridge interface and therefore IPv6 assigning a
matching link local address to the bridge interface as soon as the
bridge interface is up. After adding the first bridge port interface,
the bridge's mac address is reset correctly, however the IPv6 link
local address stays the same.
This commit ensures that we are at least having the IPv6 link local
address of the first interface added to the bridge instead of a random
one.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
SVN-Revision: 26426
2011-04-03 01:23:45 +00:00
fe8b9d5232
base-files: properly handle vlans on top of wireless interfaces
...
SVN-Revision: 26230
2011-03-18 18:24:51 +00:00
a3b9971d84
base-files: overlayfs whiteouts depend on a specific xattr entry, which does not get preserved by the tmpfs->overlay copy. work around this by cleaning all copied "(overlay-whiteout)" symlinks after the switch to jffs2
...
SVN-Revision: 26208
2011-03-17 19:09:43 +00:00
66bcd1d049
base-files: add initial support for mounting overlayfs
...
SVN-Revision: 26207
2011-03-17 19:09:39 +00:00
629e73938e
base-files: update sysctl.conf for modern kernels
...
SVN-Revision: 26204
2011-03-17 15:35:41 +00:00
1b66204ccd
base-files: Autodetect newly added wireless hardware
...
SVN-Revision: 26166
2011-03-15 00:44:15 +00:00
4bcca969dc
base-files: link libpthread against libc
...
SVN-Revision: 26161
2011-03-14 19:27:45 +00:00
71e83bd2e1
base-files: add a default /etc/services files
...
SVN-Revision: 26142
2011-03-13 19:47:42 +00:00
c33f2efbb2
base-files: add users ftp (for ftp servers), network (network related daemons such as tor, quagga, ...)
...
SVN-Revision: 26138
2011-03-13 19:10:28 +00:00
f5c130cfda
base-files: add an ftp group as well
...
SVN-Revision: 26136
2011-03-13 19:04:32 +00:00
554cbe7f18
base-files: add a few default groups to /etc/group so that we can get rid of a few postinst scripts
...
SVN-Revision: 26133
2011-03-13 18:56:34 +00:00
e8491ab2a5
base-files: make library relinking uclibc specific and fix libpthread installation for the non-relinked variant
...
SVN-Revision: 26003
2011-03-10 12:27:46 +00:00
32d8fac477
base-files: only relink libraries if the linaro toolchain is selected
...
SVN-Revision: 25983
2011-03-09 20:36:29 +00:00
e52b720870
gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically
...
SVN-Revision: 25952
2011-03-08 13:10:11 +00:00
357018e7e5
base-files: the relinked libpthread needs to be linked against libdl, otherwise calls to dlopen() fail ( fixes #8978 )
...
SVN-Revision: 25950
2011-03-08 12:48:36 +00:00
0b9cfab2a2
base-files: fix Build/Compile override handling, fixes ar7 compile
...
SVN-Revision: 25911
2011-03-06 22:36:42 +00:00
4e155b5283
base-files: do not build or use libgcc on m68k and avr32
...
SVN-Revision: 25852
2011-03-03 14:50:00 +00:00
1cc0bcfffc
base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs
...
SVN-Revision: 25800
2011-03-01 05:40:38 +00:00
73468de8d1
base-files: fix sysctl handling, do not react on fake ifaces in route hotplug handler
...
SVN-Revision: 25713
2011-02-25 22:44:37 +00:00
e6100a161b
boot.sh: Tabs are used for indent. Also use tabs in jffs2_ready()
...
SVN-Revision: 25635
2011-02-20 22:40:47 +00:00
16a300ea66
base-files: Add "-o noatime" to mount wrapper
...
noatime is cheaper than default relatime.
SVN-Revision: 25634
2011-02-20 22:39:08 +00:00
3a12229c1d
Fix whitespace
...
SVN-Revision: 25632
2011-02-20 21:25:45 +00:00
090c042089
base-files: Add /etc/nsswitch.conf to targets running glibc/eglibc, otherwise name resolution fails
...
SVN-Revision: 25568
2011-02-18 10:37:26 +00:00
e5e6dfe384
base-files: librt should depend on libpthread, not the other way around
...
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25548
2011-02-16 02:42:24 +00:00
9f7f8110e7
base-files: remove a stale reference to /usr/lib/common.awk (thx, swalker)
...
SVN-Revision: 25528
2011-02-13 19:06:20 +00:00
e4589a2e5f
it's time for some attitude adjustment ;)
...
SVN-Revision: 25514
2011-02-13 11:20:09 +00:00
c672eeffc9
remove the shared object stubs of libnsl and libresolv - let the compiler use the static variants instead
...
SVN-Revision: 25511
2011-02-13 03:26:10 +00:00
803e9ceb90
base-files: /usr/lib/common.awk is only used by /bin/ipcalc.sh, move the code there
...
SVN-Revision: 25495
2011-02-13 01:44:57 +00:00
74ab5be3d7
base-files: remove ptbtime3 rdate server, its dead
...
SVN-Revision: 25479
2011-02-12 17:54:01 +00:00
8b1b99ba73
base-files: update rdate server list
...
SVN-Revision: 25478
2011-02-12 17:46:36 +00:00
ee3a4c2ee9
base-file: cleanup ipv6 enabling in unbridge
...
SVN-Revision: 25473
2011-02-12 16:14:15 +00:00
875ff44592
base-files: - properly disable IPv6 on bridge ports - introduce accept_ra option, defaults to true for dhcp interfaces, false for others - introduce send_rs option, defaults to true for static interfaces, false for others
...
SVN-Revision: 25454
2011-02-11 00:39:11 +00:00
4e34fc521c
base-files: derive lease_acquired dhcp state var from /proc/uptime
...
SVN-Revision: 25452
2011-02-10 20:05:05 +00:00
d063af3fcf
base-files: Add include for target specific hotplug rules
...
SVN-Revision: 25415
2011-02-07 22:28:09 +00:00
99c66237f0
hotplug2 rules: Run /etc/hotplug.d/firmware/ scripts (if any) on firmware load events
...
SVN-Revision: 25383
2011-02-06 14:35:07 +00:00
b33ce3109d
base-files: remove remaining conffiles reference to /etc/banner
...
SVN-Revision: 25368
2011-02-04 23:05:12 +00:00
3d82109add
base-files: don't stop hotplug events for ppp interfaces, similar fix like the earlier one for tun/tap interfaces
...
SVN-Revision: 25355
2011-02-03 22:43:11 +00:00
79b22b246b
base-files: make the skipping of ppp interfaces in 10-net hotplug more explicit, this allows users to rely on hotplug events for ppp0 .. ppp9 interfaces spawned by other programs
...
SVN-Revision: 25354
2011-02-03 22:34:30 +00:00
bd8a1549eb
base-files: Fix alsa raw audio device hotplug rule
...
SVN-Revision: 25301
2011-02-02 01:23:34 +00:00
824331a594
hotplug2: Use stricter matching for rule regular expressions
...
SVN-Revision: 25282
2011-02-01 16:37:53 +00:00
3a3d95b191
base-files: Remove deprecated hotplug2 commands, update old commands to new
...
SVN-Revision: 25268
2011-01-31 22:29:31 +00:00
a0b2eba08c
base-files: fix a typo in processing of additional dhcp request opts
...
SVN-Revision: 25239
2011-01-29 17:06:07 +00:00
a8edd9d50e
base-files: fix handling of dhcp "reqopts" option
...
SVN-Revision: 25237
2011-01-29 13:45:16 +00:00
d7fe921089
base-files: support port_state in led config ( #6763 )
...
Signed-off-by: Alexey Torkhov <atorkhov@gmail.com>
SVN-Revision: 25172
2011-01-27 21:49:46 +00:00
25feec0c9c
package/base-files: add get_magic_long() to common upgrade script
...
Patch-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25117
2011-01-26 20:35:37 +00:00
f93b6cb844
base-files: Fix typo in option name for disabling failsafe announcment Thanks to Andrey Zholos for this patch
...
SVN-Revision: 25040
2011-01-18 14:46:25 +00:00
3b6851aa82
base-files: implement "reqopts" parameter for dhcp interfaces to specify additional dhcp options to request
...
SVN-Revision: 24780
2010-12-22 07:20:24 +00:00
Jo-Philipp Wich
Gabor Juhos
Felix Fietkau
Jonas Gorski
Mirko Vogt
Florian Fainelli
Nicolas Thill
Imre Kaloz
Vasilis Tsiligiannis
Daniel Dickinson
Michael Büsch
Hamish Guthrie