Commit Graph

10056 Commits (8e466dcdf4f391b8940148e8a0431a5a8c608584)

Author SHA1 Message Date
Gabor Juhos 8e466dcdf4 at91: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36492
2013-04-30 10:43:58 +00:00
Gabor Juhos d35545f3d7 linux/3.{8,9}: add missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36491
2013-04-30 10:43:57 +00:00
Gabor Juhos 25c45c0d53 linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
It is forced to 'y' since r36342.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36490
2013-04-30 10:43:56 +00:00
John Crispin eff12a630d ramips: move dlink profile to correct sub folder - 2nd try
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36489
2013-04-30 10:34:20 +00:00
John Crispin 1db4587bc7 ramips: move dlink profile to correct sub folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36487
2013-04-30 08:24:26 +00:00
Hauke Mehrtens ca7f9638d5 broadcom-diag: support for the WNDR3700v3
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 36482
2013-04-28 21:11:17 +00:00
Hauke Mehrtens 7dee0dae35 brcm47xx: use kernel 3.8.10 as default kernel
The biggest change with this kernel is a new partition parser.

SVN-Revision: 36480
2013-04-28 18:25:16 +00:00
Hauke Mehrtens 00a7ace7cf brcm47xx: add board detection for NETGEAR WNDR4500 V2
SVN-Revision: 36478
2013-04-28 18:19:31 +00:00
Hauke Mehrtens e7e4afbb64 kernel: fix a memory leak in split_rootfs_data()
allocate_partition() copies all the content of dpart into a new struct.

SVN-Revision: 36475
2013-04-28 17:01:56 +00:00
Hauke Mehrtens 1bac172c44 kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.
SVN-Revision: 36473
2013-04-28 16:52:11 +00:00
Jonas Gorski ad1d3f00cb kernel: update linux 3.9 patches to rc8
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36469
2013-04-28 11:55:23 +00:00
Jonas Gorski a33dd13c98 kernel: add missing bcma defines and header file for bcrmfmac
Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36468
2013-04-28 11:10:42 +00:00
Gabor Juhos 7c2632fbc5 ar71xx: add user-space support for WNR2000v3
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36461
2013-04-26 17:00:54 +00:00
Gabor Juhos b29b7b65ea ar71xx: add profile and build image for WNR2000v3
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36460
2013-04-26 17:00:53 +00:00
Gabor Juhos 9b3c0d11a2 ar71xx: Add Netgear WNR2000v3 support
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36459
2013-04-26 17:00:52 +00:00
Gabor Juhos 183e2af1c7 ar71xx: add profile and build image for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36458
2013-04-26 17:00:50 +00:00
Gabor Juhos 7c4e2c1f72 ar71xx: add user-space support for the TL-WR720N v3 board
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36457
2013-04-26 17:00:49 +00:00
Gabor Juhos 5c11773f8a ar71xx: add kernel support for TPLINK WR720N v3
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36456
2013-04-26 17:00:48 +00:00
Gabor Juhos c0691e29f1 mpc85xx: Add subtargets Generic and P1020
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36454
2013-04-26 16:57:43 +00:00
Gabor Juhos 36d4fd70bc kernel: update linux 3.8 to 3.8.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
2013-04-26 16:55:42 +00:00
Gabor Juhos 988ae9cbf8 at91: upgrade to kernel 3.8.7 and use devicetree
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36452
2013-04-26 16:55:40 +00:00
Gabor Juhos c63bb1a18e ramips: rt3883: fix build error
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36451
2013-04-26 16:55:28 +00:00
John Crispin b42a173664 lantiq: make leds and network work on VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
2013-04-25 19:03:41 +00:00
John Crispin 520bf46375 lantiq: fix board detection helpers
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
2013-04-25 19:03:37 +00:00
John Crispin 157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
John Crispin 4664e21293 generic: fix rtl8366_smi compile warning
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36442
2013-04-25 19:03:29 +00:00
John Crispin 9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
2013-04-25 19:03:25 +00:00
John Crispin d3d18ae812 lantiq: make lzma-loader based images for VG3503J
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36440
2013-04-25 19:03:21 +00:00
John Crispin a46acc80e4 lantiq: update VG3503J.dts to match new partition layout
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36439
2013-04-25 19:03:17 +00:00
John Crispin 46306c2e47 lantiq: add lzma-loader source
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36438
2013-04-25 19:03:13 +00:00
John Crispin e141b73f9d ramips: remove now unneeded user-space board detection
Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36436
2013-04-25 19:03:05 +00:00
John Crispin cf3885eb0f ramips: introduce DTS for ALL5003
Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36435
2013-04-25 19:03:01 +00:00
John Crispin 978567a89e ramips: set preinit interface to eth0 by default.
This makes any ramips device accessible via ethernet in failsafe mode.

Based on: https://dev.openwrt.org/changeset/36322

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36434
2013-04-25 19:02:57 +00:00
John Crispin 7bfab6e308 ramips: Add Alpha ASL-26555 support.
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
2013-04-25 19:02:53 +00:00
John Crispin c7216d0cab ramips: Add support of D-link DIR-620D1
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36432
2013-04-25 19:02:48 +00:00
John Crispin deb3635923 ramips: sync kernel patches with the mips-next tree
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36431
2013-04-25 19:02:42 +00:00
John Crispin 831c7ea04f preinit: move cmdline failsafe= handling ot the generic code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36430
2013-04-25 19:02:37 +00:00
Jonas Gorski 90986b5581 bcm63xx: update patches with upstream submissions
SVN-Revision: 36407
2013-04-23 13:55:36 +00:00
Jonas Gorski 2a1a16d2d5 bcm63xx: switch to linux 3.8
SVN-Revision: 36406
2013-04-23 13:55:17 +00:00
Steven Barth 4e8f7f37ed Change default IPv6 config to enable DHCPv6-PD
SVN-Revision: 36384
2013-04-22 19:40:16 +00:00
Felix Fietkau a8a01b42ae kernel: allow __netdev_alloc_skb_ip_align to be called with dev = NULL
SVN-Revision: 36378
2013-04-22 15:01:36 +00:00
Felix Fietkau cd35ea2174 ar71xx: merge more unaligned access hacks from cerowrt-next
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36374
2013-04-22 12:53:21 +00:00
Felix Fietkau f58dcb59c6 kernel: backport SSB/BCMA changes in preparation for a compat-wireless update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36367
2013-04-19 12:39:40 +00:00
Gabor Juhos f03960723a linux/3.9: add missing config symbol
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36365
2013-04-19 08:07:38 +00:00
Gabor Juhos e07848664c linux/3.[89]: update bridge_remove_ipv6_dependency patch
Fixes the following warning:

    CC [M]  net/ipv6/addrconf.o
  net/ipv6/addrconf.c: In function 'addrconf_init':
  net/ipv6/addrconf.c:4944:2: warning: assignment from incompatible pointer type [enabled by default]

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36364
2013-04-19 08:07:37 +00:00
Gabor Juhos 151cadfe32 kernel: update linux 3.8 to 3.8.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36363
2013-04-19 08:07:34 +00:00
Felix Fietkau 96bb7c123b build: consistently use 'depends on' instead of 'depends'
make the syntax more compatible with kernel menuconfig

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36351
2013-04-17 15:36:41 +00:00
John Crispin e3003ea2a9 fix prepare_generic_squashfs
prepare_generic_squashfs was called twice on the generated images breaking mount_root

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36349
2013-04-17 11:54:09 +00:00
John Crispin 8001e6a689 fix rt305x gpio
https://dev.openwrt.org/ticket/13359

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36343
2013-04-16 06:58:18 +00:00
Felix Fietkau a662200205 kernel: force CONFIG_NET_SCHED=y for fq_codel (#13360)
SVN-Revision: 36342
2013-04-15 20:40:29 +00:00