8d86dbb454
ppc40x: build initramfs images for the OpenRB/Magicbox boards
...
SVN-Revision: 20980
2010-04-18 08:32:35 +00:00
1e8f91502e
kernel: refresh 2.6.32 patches
...
SVN-Revision: 20952
2010-04-17 09:29:29 +00:00
2231b9d761
ppc40x: fix MagicBox partition table
...
SVN-Revision: 20951
2010-04-17 09:29:26 +00:00
54e9e802c4
gemini: add support for wiligear wbd-222 (patch by Darius Augulis)
...
SVN-Revision: 20949
2010-04-16 21:03:36 +00:00
b0cf1f5baa
gemini: either scatter/gather dma or hw checksum breaks ethernet, comment out the define that enables both
...
SVN-Revision: 20940
2010-04-16 20:23:35 +00:00
f7cc3d576c
swconfig: Add cpu port index to help output.
...
Let swconfig provide the cpu port index in its help page. This is
needed as e.g. Atheros switches have their cpu port at port 0, not
port 5.
This could allow e.g. luci to get a rough overview of the layout of
the switch.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 20939
2010-04-16 19:32:40 +00:00
7b127c754b
atheros: nuke clocksoure init patch
...
SVN-Revision: 20937
2010-04-16 19:32:27 +00:00
d0646a08aa
ppc40x: enable USB support
...
Cc: backfire@openwrt.org
SVN-Revision: 20933
2010-04-16 18:40:12 +00:00
3669209288
ppc40x: add isp116x-hcd to the device tree for the OpenRB board
...
Cc: backfire@openwrt.org
SVN-Revision: 20932
2010-04-16 18:40:10 +00:00
b448703ea8
ppc40x: make isp116x-hcd driver usable on the OpenRB board
...
Cc: backfire@openwrt.org
SVN-Revision: 20931
2010-04-16 18:40:06 +00:00
e0ba83e32e
ppc40x: add more EBC_BXCR defines
...
Cc: backfire@openwrt.org
SVN-Revision: 20930
2010-04-16 18:40:02 +00:00
15d344df50
ppc40x: move perwe fixup into a separate function
...
Cc: backfire@openwrt.org
SVN-Revision: 20929
2010-04-16 18:39:52 +00:00
e712ef386e
brcm47xx: fix ide drive assignment ( closes #7061 )
...
SVN-Revision: 20924
2010-04-16 15:05:32 +00:00
7e29eac780
- enable PCI - add kmod-pcnet32 to default packages - make kmod-pcnet32 available for malta target
...
SVN-Revision: 20923
2010-04-16 11:34:21 +00:00
1c0e751391
ar71xx: fix up alignment handling
...
- on ar724x, rx buffers can be aligned with an offset of 2, which keeps the ip header aligned
- alignment offset is only added if the ar8216 workaround is not active and the phy driver does not advertise its own packet alignment
- ar71xx and ar91xx can not handle rx alignment offsets, however taking a hit on unaligned exceptions seems to have less overhead than re-aligning the data for large packets
- use memmove to re-align small packets, if necessary
tested on ar9132, ar7240 and ar7242 based devices without ar8216 headers
SVN-Revision: 20892
2010-04-15 23:31:17 +00:00
598e0656c5
brcm47xx: add preliminary 2.6.34 support
...
SVN-Revision: 20888
2010-04-15 20:50:50 +00:00
af45b63a85
2.6.34: fix kzalloc error
...
SVN-Revision: 20881
2010-04-15 16:46:24 +00:00
d3e5ab1f19
target/toolchain: match toolchain directory name changes in r19885 & r20215 ( closes : #7148 & #7162 )
...
SVN-Revision: 20865
2010-04-15 00:33:40 +00:00
34474b8840
target/adm5120: fix image building after r20834
...
SVN-Revision: 20855
2010-04-14 21:13:59 +00:00
841eff56d4
target/ixp4xx: fix image building after r20834 ( closes : #7157 )
...
SVN-Revision: 20854
2010-04-14 14:36:41 +00:00
fe5d55977e
tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120
...
SVN-Revision: 20850
2010-04-14 00:45:48 +00:00
6fd5014c56
add Buffalo WHR-G125 specifc switch quirks to netconfig, shorten code by merging identical fixes
...
SVN-Revision: 20846
2010-04-13 22:34:13 +00:00
b5cfd7bde5
add lzma/jffs2 patches for 2.6.34
...
SVN-Revision: 20845
2010-04-13 21:45:03 +00:00
668fd62080
don't use lzma/jffs2 on <2.6.33, set lzma/jffs2 as default for >=2.6.33. switch verbose mode on compresor statistics.
...
SVN-Revision: 20844
2010-04-13 21:36:58 +00:00
e438c665db
vp6500: Add backlight device
...
SVN-Revision: 20843
2010-04-13 20:52:41 +00:00
231012cba0
ar71xx: fix image builds (broken by r20834)
...
SVN-Revision: 20840
2010-04-13 18:01:46 +00:00
e2b57ecf5f
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
0946764732
remove 'svn:executable' property
...
SVN-Revision: 20831
2010-04-12 17:08:57 +00:00
c2c88d315f
add jffs2/lzma support (not activated by default yet)
...
SVN-Revision: 20828
2010-04-12 13:14:42 +00:00
06cece53ef
fix module loading due to CONFIG_LOCALVERSION being on ( #7144 )
...
SVN-Revision: 20822
2010-04-12 12:33:41 +00:00
185965e128
ppc40x: add sysupgrade support
...
Cc: backfire@openwrt.org
SVN-Revision: 20821
2010-04-12 12:21:18 +00:00
bc4cd8c850
ppc40x: increase kernel partition size on OpenRB/Magicbox
...
Cc: backfire@openwrt.org
SVN-Revision: 20820
2010-04-12 12:21:15 +00:00
bd0c2617f1
ppc40x: sync kernel config
...
Cc: backfire@openwrt.org
SVN-Revision: 20819
2010-04-12 12:21:12 +00:00
efaf0367f2
mpc83xx: add 2.6.33 support
...
SVN-Revision: 20818
2010-04-12 10:47:00 +00:00
985ce5e3fa
vp6500: Add leds and keypad devices.
...
SVN-Revision: 20817
2010-04-12 00:11:18 +00:00
d3f097bfde
Add missing symbols to 2.6.34 config
...
SVN-Revision: 20816
2010-04-11 22:30:27 +00:00
e95a1d7228
Use lzma kernel compression.
...
SVN-Revision: 20815
2010-04-11 22:12:10 +00:00
fba1a0a074
swconfig: Check vlan/port indexes for validity.
...
Swconfig needs to make sure that requested vlans/ports actually exist,
else it might read or modify memory not belonging to itself.
This patch adds a quick range check in swconfig's kernel part to
prevent accidential or intentional memory modification.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 20811
2010-04-11 20:51:37 +00:00
2a018eb380
refresh 2.6.33 patches for 2.6.33.2
...
SVN-Revision: 20803
2010-04-11 18:15:15 +00:00
de18353622
ramips: nuke clocksource init patch
...
SVN-Revision: 20802
2010-04-11 17:47:30 +00:00
b4bb5ebfaa
ramips: generate sysupgrade images for the rt305x devices
...
SVN-Revision: 20801
2010-04-11 17:47:28 +00:00
7581054e93
ramips: add sysupgrade support
...
SVN-Revision: 20800
2010-04-11 17:47:25 +00:00
09aec474af
ramips: add diag support
...
SVN-Revision: 20799
2010-04-11 17:47:23 +00:00
2872bade69
ramips: enable image commandline hack and cmdline partition parsing
...
SVN-Revision: 20798
2010-04-11 17:47:20 +00:00
af05b16c98
ramips: add default profiles
...
SVN-Revision: 20797
2010-04-11 17:47:17 +00:00
d1031cd861
time.c: Timer enable registers are only 8bit width.
...
SVN-Revision: 20796
2010-04-11 16:24:06 +00:00
15e8d2e0b7
add net5501 support
...
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 20794
2010-04-11 12:36:55 +00:00
62b96185c3
ixp4xx: add Titan Wireless TW-266-2 support (thanks juhosg & florian)
...
SVN-Revision: 20793
2010-04-11 09:03:10 +00:00
3c48fb6ff9
ixp4xx: add 2.6.33 support
...
SVN-Revision: 20792
2010-04-11 09:01:36 +00:00
f4d71f5e81
create two endian-specific subtargets, as malta can run both
...
SVN-Revision: 20790
2010-04-10 21:02:51 +00:00
Gabor Juhos
Felix Fietkau
Alexandros C. Couloumbis
Jo-Philipp Wich
Nicolas Thill
Daniel Dickinson
Lars-Peter Clausen
Florian Fainelli