55ecceb84e
uboot-envtools: add nsa310b envs
...
accessing the u-boot's envs on this device is required to read the mac address.
These are the envs of the new u-boot, not of the stock one.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2017-01-24 16:21:25 +01:00
1599a14b32
uboot-envtools: drop executable file attribute from files/ipq
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
a9ce2ba31c
uboot-envtools: fix Edimax BR-6425 board name
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
35ed3be59f
uboot-envtools: fix code formatting style in uci-defaults files
...
Few minor code formatting style fixes, including:
- keep one board per line
- always use "|\" (for consistency)
- remove redundant double quotes and empty lines
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
f70a2adca1
uboot-envtools: keep boards in alphabetical order
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-20 09:35:36 +01:00
c40477519e
uboot-envtools: add support for YunCore SR3200 and XD3200
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-12 09:57:40 +01:00
d6e8b1f841
uboot-envtools: add 'dockstar' for kirkwood
...
Add board 'dockstar' to known fw_env-configurations.
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
2016-11-21 10:10:38 +01:00
d86f08cc94
uboot-envtools: add support for YunCore CPE830
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
dcceea4fd3
uboot-envtools: add support for YunCore CPE870
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
9ee8257cc7
uboot-envtools: add support for YunCore AP90Q
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-11-21 10:05:40 +01:00
e3875350f3
ar71xx: add support for D-Link DAP-2695 rev. A1
...
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>
2016-10-27 01:50:42 +03:00
ebd7e565c7
package/uboot-envtools: Add support for ZyXEL NBG6817
...
Signed-off-by: André Valentin <avalentin@marcant.net>
2016-10-26 12:37:47 +02:00
3764caa934
mvebu: add support for the Linksys WRT3200ACM (Rango)
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-10-24 08:45:06 +02:00
d963ddf042
ar71xx: add support for gl-ar300m
...
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/
Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-20 00:21:48 +02:00
14ee2b0642
uboot-envtools: add support for jjPlus JWAP230
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
c30fd5e87d
uboot-envtools: add support for Wallys DR531
...
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
fac7ba1abc
uboot-envtools: add support for ZBT-WG2626
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-19 16:22:23 +02:00
928163bad2
uboot-envtools: add ipq806x support
...
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
704965d93f
uboot-envtools: add config for WBMR300 (lantiq)
...
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
3f508fce77
package/uboot-envtools: add OpenMesh MR1750v2 support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:26 +02:00
00943e0931
package/uboot-envtools: add OpenMesh OM2P-HSv3 support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
374cae9e6f
ramips: add initial support for SamKnows SK-WB8
...
Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-05-12 03:29:35 +02:00
152da8b240
lantiq: uboot-envtools on BTHOMEHUBV3A
...
Generate fw_env.config for BTHOMEHUBV3A.
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 49236
2016-04-26 11:43:11 +00:00
012da658a4
oxnas: add support for Akitio MyCloud mini
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 49197
2016-04-19 20:12:41 +00:00
eeaf5035df
uboot-envtools: add OpenMesh OM5P-ACv2 support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
SVN-Revision: 49153
2016-04-09 10:26:28 +00:00
2b541ce3f9
uboot-envtools: add OpenMesh OM5P-AC support
...
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
SVN-Revision: 49146
2016-04-09 10:26:04 +00:00
35e7bfb906
uboot-envtools: add support for ap120c
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 49083
2016-03-23 22:31:41 +00:00
99414dbcf1
ramips: Add support for Xiaomi MiWiFi Nano
...
Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash
Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>
v3 includes changes suggested by L. D. Pinney & Karl Palsson-
Eliminate en25q64 (4MB) flash chip
Alphabetization
Remove hyphen in model
Rename profile from miwifinano.mk to xiaomi.mk
Add gpios that are attached to leds
SVN-Revision: 49024
2016-03-16 09:26:48 +00:00
fb1273dfdd
ar71xx: PowerCloud CR5000 openwrt configuration
...
OpenWrt configuration part of support for the PowerCloud Systems
CR5000. The CR5000 is a dual-band 802.11n wireless router with
8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and
five port gigabit ethernet switch. The CR5000 was sold as
hardware for the Skydog cloud-managed router service.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
SVN-Revision: 47946
2015-12-19 11:28:18 +00:00
59fc337a9a
ar71xx: PowerCloud CR3000 OpenWrt configuration
...
OpenWRt configuration part of support for the PowerCloud
Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with
8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast
ethernet wan port that was sold by PowerCloud Systems as
hardware for the Skydog cloud-managed router service.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
SVN-Revision: 47945
2015-12-19 11:28:12 +00:00
abc1faad0b
ar71xx: PowerCloud CAP324 OpenWrt configuration
...
Openwrt configuration part of support for PowerCloud CAP324
Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems
who's stock firmware (CloudCommand) provides 'cloud' based managment
of large numbers access points.
The CAP324 is a dual-band 802.11n wireless access point with 16MB flash
and 128MB RAM and single gigabit ethernet port. It can be powered via PoE
or a wall wart.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
SVN-Revision: 47944
2015-12-19 11:27:59 +00:00
1f9cd871f7
uboot-envtools: add support for linkits7688d
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47500
2015-11-18 15:00:38 +00:00
2f8ebe10b9
uboot-envtools: kirkwood: fix EA35/4500 board names
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47457
2015-11-11 12:48:29 +00:00
3ef14d0c3d
kirkwood: rework Linksys EA[34]500 DTS
...
- Use board engineering names rather than marketing names
- Linksys uses a dual firmware layout, where the bootloader
will switch to the other stored image when one fails to
boot three consecutive times.
In order to make this firmware compatible with the factory
images and the stock bootloader we must match this layout.
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 47429
2015-11-10 00:16:24 +00:00
1345073268
uboot: create the uboot config file for the shelby as well
...
fixes #20827
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 47365
2015-11-03 11:07:30 +00:00
51dd991d39
ramips: add LinkIt Smart7688 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 47203
2015-10-19 10:07:38 +00:00
c2425ac649
uboot-envtools: Add Gateworks Ventana Support
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>
SVN-Revision: 47167
2015-10-10 12:34:45 +00:00
b26840a9fc
uboot_envtools: add P2812HNUF1
...
Add generation of /etc/fw_env.config for P2812HNUF1
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
SVN-Revision: 47133
2015-10-05 10:28:39 +00:00
e3f4a3d22a
package/uboot-envtools: add OpenMesh MR1750 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46931
2015-09-14 20:11:43 +00:00
2705cda813
mvebu: add support for the Linksys Caiman and Cobra
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
b0ad24f0d5
mvebu: migrate mamba support to the upstreamed code
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45400
2015-04-12 17:29:50 +00:00
9314180c34
uboot-envtools: add ramips wsr-600/1166 support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 44897
2015-03-19 21:00:41 +00:00
37a4102423
package/uboot-envtools: add OpenMesh OM5P-AN support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 44865
2015-03-17 09:43:52 +00:00
71f96048e6
package: uboot-envtools: add nbg6716 to appropriate group
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 44308
2015-02-07 19:59:08 +00:00
64653e6373
uboot-envtools: fix Linksys EA3500 env size
...
Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 44037
2015-01-18 16:45:11 +00:00
180c1f3302
uboot-envtools: add more kirkwood boards
...
- SheevaPlug
- SheevaPlug with eSATA
- GuruplugServerPlus
Signed-off-by: Gerald Kerma <dreagle@doukki.net>
SVN-Revision: 43747
2014-12-18 15:53:46 +00:00
6ad5109211
uboot-envtools: use environment stored in UBI also for KD20
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43510
2014-12-03 16:05:23 +00:00
de49133a8b
uboot-envtools: add support for oxnas target
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43390
2014-11-26 09:00:40 +00:00
d265ebd1dc
uboot-envtools: add carambola2 support
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 43317
2014-11-19 13:49:54 +00:00
7dce745a99
package/uboot-envtools: add OpenMesh MR900v2 support
...
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 43269
2014-11-14 16:55:26 +00:00
Alberto Bursi
Piotr Dymacz
Paul Wassi
Stijn Tintel
André Valentin
Imre Kaloz
Zhao Gang
Daniel Golle
John Crispin
Felix Fietkau
Sven Eckelmann
Andrew Yong
John Crispin
Hauke Mehrtens
Luka Perkov
Felix Fietkau