eb4109ba78
Deployment of IPv6 has opened up many more prefixes than just the 2000::/3 space, so a default route of ::/0 is more correct. Thanks Dave Taht
...
SVN-Revision: 26857
2011-05-08 17:03:07 +00:00
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
3b1b49a49b
base-files: fix a typo in etc/banner
...
SVN-Revision: 26841
2011-05-07 09:23:33 +00:00
f3e4c15229
lua: remove posix from Lua core, almost nothing uses it - saves 9k compressed
...
SVN-Revision: 26822
2011-05-04 14:51:06 +00:00
dbea075cd4
ath9k: add noise floor calibration fix that should improve stability
...
SVN-Revision: 26819
2011-05-04 14:35:35 +00:00
9736cfef66
comgt: add tty hotplug remove handling, only iterate each tty once ( #9211 )
...
SVN-Revision: 26816
2011-05-04 08:19:07 +00:00
bba138c671
kernel: revert r26814
...
SVN-Revision: 26815
2011-05-03 21:25:36 +00:00
be2275b8e6
kernel: add kmod-crypto-ipsec kmod-crypto-ipsec bundles some otherwise unprovided kernel crypto modules that are useful for IPSEC. This is an alternative to breaking these modules out into kmod-crypto-wq (crypto_wq.ko), kmod-crypto-rng (rng.ko and krng.ko), and kmod-crypto-iv (eseqiv.ko and chainiv.ko).
...
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26814
2011-05-03 21:22:43 +00:00
3d0ac93274
kernel: add kmod-crypto-{wq,rng,iv} Add kmod-crypto-iv as a dependency for kmod-ipsec. Also remove the extraneous kmod-crypto-core dependency to eliminate recursion.
...
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26813
2011-05-03 21:21:05 +00:00
32f3c920a2
kernel: add kmod-crypto-{wq,rng,iv} This patch adds kmod-crypto-wq, kmod-crypto-rng, and kmod-crypto-iv packages. These packages provide some missing kernel crypto modules which are required for IPSEC. The strongswan4, ipsec-tools, and possibly other IPSEC packages do not work properly without these modules.
...
NOTE: The KCONFIG associated with each of these modules gets selected
whenever CRYPTO_MANAGER (kmod-crypto-manager) is selected so these
modules are already being built.
Signed-off-by: Lars Hjersted <lars@hjersted.com>
SVN-Revision: 26812
2011-05-03 21:19:56 +00:00
29392373f3
comgt: move ifup invocation back into background subshell to prevent hotplug deadlocks
...
SVN-Revision: 26810
2011-05-03 19:45:55 +00:00
549067e2b4
comgt: move 3g hotplug handling to tty subsystem, fixes race on coldplug ( #9211 )
...
SVN-Revision: 26809
2011-05-03 19:39:13 +00:00
ff4203b9bd
base-files: cleanup permissions of device files in common hotplug rules ( #9211 )
...
SVN-Revision: 26808
2011-05-03 19:37:59 +00:00
d66dc5307d
hotplug2: introduce tty subsystem events ( #9211 )
...
SVN-Revision: 26807
2011-05-03 19:35:58 +00:00
2e9e4c435f
firewall: revert accidential committed changes from r26805
...
SVN-Revision: 26806
2011-05-02 12:55:36 +00:00
ad23dd94b6
firewall: provide examples of ssh port relocation on firewall and IPsec passthrough Two examples of potentially useful configurations (commented out, of course):
...
(a) map the ssh service running on the firewall to 22001 externally, without modifying the configuration of the daemon itself. this allows port 22 on the WAN side to then be port-forwarded to a
LAN-based machine if desired, or if not, simply obscures the port from external attack.
(b) allow IPsec/ESP and ISAKMP (UDP-based key exchange) to happen by default. useful for most modern VPN clients you might have on your WAN.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26805
2011-05-02 12:54:31 +00:00
3dbb8c5088
brcm47xx: add fallback sprom for pci devices without an own sprom.
...
If there is no sprom on an ssb based pci device on the brcm47xx
architecture ssb now asks the architecture code to look into the nvram
to get some sprom data for this device. Now we are able to read out
pci/1/1/ foo or pci/1/3/ foo config options.
This will fix some problems where the wireless devices does not got an
mac address and the following message was show:
ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
SVN-Revision: 26801
2011-05-01 20:28:35 +00:00
28fb716737
ath9k: add a new fix for signal strength / noise measurements
...
SVN-Revision: 26798
2011-05-01 18:23:12 +00:00
ebcc60cf35
mac80211: detect and drop incoming packets with invalid CCMP packet numbers to fix connection hangs on some devices
...
SVN-Revision: 26795
2011-05-01 01:45:26 +00:00
ed5e092217
exclude pktgen for uml target
...
SVN-Revision: 26781
2011-04-29 12:04:17 +00:00
cb0c1f9015
relayd: map "ipaddr" option to local ip (-L)
...
SVN-Revision: 26773
2011-04-27 19:16:35 +00:00
c2d4e98e34
madwifi: Fix compilation for 2.6.39
...
Fix compilation for 2.6.39 by replacing SPIN_LOCK_UNLOCKED with
DEFINE_SPINLOCK().
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26771
2011-04-26 23:05:34 +00:00
6b376db844
mac80211: backport some more compat fixes, fix compile issues on 2.6.31 and earlier
...
SVN-Revision: 26768
2011-04-26 22:23:52 +00:00
be3deb5b14
mac80211: broadcast the country IE by default if the country code is configured ( #9308 )
...
SVN-Revision: 26765
2011-04-26 19:33:27 +00:00
2b5517934d
wpa_supplicant: make sure that the common 802.11 code gets linked in ( fixes #9299 )
...
SVN-Revision: 26764
2011-04-26 19:16:25 +00:00
359e667fd5
mac80211: replace the regd revert patch with a proper fix, add some more pending patches
...
SVN-Revision: 26761
2011-04-26 01:23:23 +00:00
f2ccc3ada5
ath9k: remove the signal strength fix, it causes a lot of confusion and seems to be just as inaccurate as the original version of the code
...
SVN-Revision: 26753
2011-04-25 18:21:32 +00:00
9dbcf86d8e
cfg80211: revert upstream regdomain handling breakage
...
SVN-Revision: 26752
2011-04-25 18:21:28 +00:00
cbbe49a1d8
hostapd: fix a few compile errors and warnings
...
SVN-Revision: 26751
2011-04-24 03:34:46 +00:00
e15e8f6976
mac80211: do rate control updates when the HT configuration changes on an interface
...
SVN-Revision: 26750
2011-04-23 21:34:40 +00:00
d7bdfca6d0
hostapd: update to 2011-04-21
...
SVN-Revision: 26749
2011-04-23 21:34:35 +00:00
6986b1b7c2
mac80211: remove unneeded patch
...
This was fixed upstream
SVN-Revision: 26745
2011-04-21 09:32:49 +00:00
970252faf8
mac80211: update to wireless-testing 2011-04-19, contains several beacon related fixes for ath9k
...
SVN-Revision: 26744
2011-04-20 18:14:35 +00:00
7982978391
ppp: extend the r26742 change to ip-down too
...
SVN-Revision: 26743
2011-04-20 12:08:12 +00:00
8d47f51f7c
ppp: prevent duplicate hotplug for non uci managed ppp interfaces ( #9275 )
...
SVN-Revision: 26742
2011-04-20 12:02:04 +00:00
2a386cee99
firewall: prevent excessive uci state data aggregation ( #9152 )
...
SVN-Revision: 26740
2011-04-20 11:49:09 +00:00
04d064a590
busybox: refresh patches
...
SVN-Revision: 26738
2011-04-20 02:56:23 +00:00
c4dbe835b4
busybox: fix issues with static routes and 6rd option parsing (thx, Florian Fuessl)
...
SVN-Revision: 26737
2011-04-20 02:56:17 +00:00
75a63f1981
mac80211: b43: Expose N-PHY support
...
Allow enabling of N-PHY support for BCM4321 and BCM4322.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26736
2011-04-19 21:44:29 +00:00
becddc9ec7
mac80211: b43: Expose PIO mode fallback
...
Allow reenabling the PIO mode fallback for b43.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26735
2011-04-19 21:43:19 +00:00
0429ec0c11
mac80211: b43: Expose debug option
...
Allow enabling debug output and debugfs for B43.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26734
2011-04-19 21:40:29 +00:00
cda9981625
mac80211: b43: Add Firmware 5.10.56.27
...
Add the 5.10.56.27 firmware option. This includes updating b43-fwcutter to
its newest release 14 and updating the b43-fwsquash.py to recognise rev 16
n phy files.
Also rename the current options from STABLE/EXPERIMENTAL to their version
numbers.
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
SVN-Revision: 26733
2011-04-19 21:40:08 +00:00
ea07da5fe5
hostapd: fix bridge handling for wds stations ( #9257 )
...
SVN-Revision: 26724
2011-04-19 15:41:49 +00:00
9d0882b720
mac80211: re-enable beacon channel hints
...
SVN-Revision: 26723
2011-04-19 15:41:45 +00:00
144bee2090
base-files: fix stale space in eglibc library install section ( #9270 )
...
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
f22d06ad7a
librpc: update to a newer version to fix issues with __set_errno
...
SVN-Revision: 26716
2011-04-18 09:42:46 +00:00
032a3504ee
ath9k: assign a keycache slot per station for unencrypted links to fix powersave frame filtering
...
SVN-Revision: 26712
2011-04-17 20:56:14 +00:00
cbc16e179e
ath9k: add a patch to show excessive retry counts for single MPDUs
...
SVN-Revision: 26711
2011-04-17 20:56:10 +00:00
8f5a84a690
mac80211: fix the config define for iwl3945
...
SVN-Revision: 26697
2011-04-16 19:52:39 +00:00
8cf42db0ca
mac80211: make intel wireless drivers depend on pci support
...
SVN-Revision: 26696
2011-04-16 19:52:35 +00:00
Travis Kemen
Jo-Philipp Wich
Gabor Juhos
Felix Fietkau
Hauke Mehrtens
Florian Fainelli