Commit Graph

135 Commits (828221c6834cf9693a5458546827bbdc6063db9c)

Author SHA1 Message Date
Felix Fietkau 46f75ee869 add WRT300N v1.1 support (patch from #6379)
SVN-Revision: 18921
2009-12-24 10:58:09 +00:00
Jo-Philipp Wich d55e721178 fix typo in switch config migration script
SVN-Revision: 18657
2009-12-05 12:39:28 +00:00
Jo-Philipp Wich a4b1848387 add migration code to automatically convert old to new switch config on first boot, this will be removed at some point in the future
SVN-Revision: 18432
2009-11-15 23:19:39 +00:00
Jo-Philipp Wich 194f32bc26 change switch config to swconfig style format to remain consistent accross platforms
SVN-Revision: 18425
2009-11-15 18:43:46 +00:00
Hauke Mehrtens 30f859403a fix problem with 128MB ram.
This patch is out of broadcoms official source code

SVN-Revision: 18413
2009-11-13 20:32:47 +00:00
Imre Kaloz ef42fb4c13 sort all target config files
SVN-Revision: 18367
2009-11-11 09:27:13 +00:00
Andy Boyett 260aee67dc fix failsafe, was accidentally broken by r18214. Thanks Daniel Gimpelevich
SVN-Revision: 18253
2009-11-01 01:09:56 +00:00
John Crispin 2d57b56bce make etehrent work on wrt350n, thx sn9
SVN-Revision: 18214
2009-10-29 21:26:36 +00:00
Felix Fietkau 43a802864a Fix Buffalo WBR-G54 and WBR-B11 support (updated patch)
Signed-off-by: Roger Hardiman <roger@rjh.org.uk>

SVN-Revision: 17598
2009-09-16 18:14:29 +00:00
Imre Kaloz 3d0c1254df brcm-2.4 is the only non-2.6 target, it's pointless to note the kernelversion in other targets' Target-Name
SVN-Revision: 17102
2009-08-03 11:44:28 +00:00
Florian Fainelli 09e06acbec update profile to include the rtc driver
SVN-Revision: 17074
2009-08-01 11:10:02 +00:00
Florian Fainelli 31fbb89034 add support for the WRT160N, patch from Westley Paynter
SVN-Revision: 17031
2009-07-27 13:00:23 +00:00
Hauke Mehrtens 8d5a0d9721 This patch adds some vital exports for fuse24 to the kernel. (forgotten in #5186) Closes #5333
SVN-Revision: 16448
2009-06-14 11:36:58 +00:00
Florian Fainelli cec852c087 update to 2.4.37, tested on wrt54gs (#4766)
SVN-Revision: 16144
2009-05-28 15:55:54 +00:00
Felix Fietkau c3fb9f9226 brcm-2.4: disable ip_vs, refresh kernel config
SVN-Revision: 16139
2009-05-28 15:41:23 +00:00
Andy Boyett d10e83e07c profiles: madwifi is not supported on 2.4, remove atheros profile
SVN-Revision: 15944
2009-05-20 21:10:15 +00:00
Felix Fietkau 4c406b52a2 brcm-2.4: rip out all /dev/nvram and nvram setting/committing code from the kernel
SVN-Revision: 15440
2009-04-27 14:51:26 +00:00
Felix Fietkau 34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
SVN-Revision: 15242
2009-04-17 14:09:46 +00:00
Felix Fietkau de0332f86a rename our /bin/login script to /bin/login.sh to avoid collisions with busybox - we always use -l on telnetd anyway
SVN-Revision: 15097
2009-04-04 09:35:55 +00:00
Florian Fainelli fc432e4371 move the mii_ioctl to generic patches, fixes (#1802)
SVN-Revision: 15045
2009-03-26 09:28:24 +00:00
Florian Fainelli beb4eae1fa backport mii_ioctl_data fix to make wpa-supplicant roboswitch driver work (#1862)
SVN-Revision: 14891
2009-03-15 16:40:42 +00:00
Felix Fietkau f5fba5bc3c Asus WL-330gE Support
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>

SVN-Revision: 14624
2009-02-22 18:45:39 +00:00
Felix Fietkau f57651b042 fix a memory corruption bug in the linux 2.4 version of b44
SVN-Revision: 13955
2009-01-10 00:55:38 +00:00
Felix Fietkau 4f5b45e3c2 b44: fix misalignment and space-saving in rx packet handling (significant throughput and cpu load improvement)
SVN-Revision: 13946
2009-01-09 03:06:37 +00:00
Felix Fietkau 59a00d52a9 make broadcom-wl robust against implicit kernel config changes (e.g. netfilter), upgrade it from minor version .2 to .3 (adds fixed bssid support for ad-hoc)
SVN-Revision: 13912
2009-01-07 04:26:14 +00:00
Andy Boyett 9f8c82da09 Add hostapd-mini to default images where applicable
SVN-Revision: 13819
2009-01-02 05:12:46 +00:00
Felix Fietkau f47a4a58c5 fix sysupgrade support for brcm-2.4 and brcm47xx make mtd refresh based config append optional (leave enabled on x86)
SVN-Revision: 12657
2008-09-23 11:05:54 +00:00
Imre Kaloz 88041e0f1b final fix for BCM5354 USB cores, hopefully
SVN-Revision: 12499
2008-09-02 11:28:57 +00:00
Florian Fainelli 5cf0db54c6 Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760)
SVN-Revision: 12276
2008-08-11 06:38:48 +00:00
Gabor Juhos 9b2e1bdd8d fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788)
SVN-Revision: 11935
2008-07-26 16:10:44 +00:00
Travis Kemen 4e9e2cba40 fix sierra patches
SVN-Revision: 11909
2008-07-22 15:16:43 +00:00
Travis Kemen 8894411b60 This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz, re-based against 2.4.35 and repaired for obvious breakage (didn't use its device table, etc.).
Changes from Linksys tree:
 - Remove 'vendor' and 'product' parameters; these aren't used in the
mainstream driver and seem to only have served to break it.
 - Remove bogus 'sierra_device_ids' table, used with above.
 - Changed references to 'sierra_device_ids' back to id_table
 - Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to
current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS
 - Added #include to enable pl2303 hack to remain until I can figure
out if it's still necessary.
Signed-off-by:  RB <aoz.syn@gmail.com>

SVN-Revision: 11899
2008-07-21 20:40:14 +00:00
Travis Kemen 1a47f8142d This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com>
SVN-Revision: 11898
2008-07-21 20:36:16 +00:00
Felix Fietkau 20937ce81a (5/6) bcm57xx: bcm4785 incomplete reboot
I noticed my wrt350n would not reliably reboot after entering
the reboot command.  I found this code in the source for the
wrt600n.  It corrects the problem, and the wrt350n reboots
reliably now.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11470
2008-06-15 11:10:43 +00:00
Felix Fietkau 9621d872ca (3/6) bcm57xx: preinit
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11468
2008-06-15 11:10:13 +00:00
Felix Fietkau f9ad520e37 (2/6) bcm57xx: netconfig
Update the netconfig script to support boardtype 0x478.  I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11467
2008-06-15 11:09:49 +00:00
Peter Denison 473d5705bd Include missing part of r11275. Fix fw_argX from CFE
SVN-Revision: 11340
2008-06-03 19:29:53 +00:00
Peter Denison c9f6d43927 Don't nuke fw_argX from CFE - Thanks jhansen
SVN-Revision: 11275
2008-05-27 15:01:07 +00:00
Gabor Juhos 8932b397b8 refresh kernel patches
SVN-Revision: 11214
2008-05-19 13:45:06 +00:00
Travis Kemen 0d25337129 This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu>
SVN-Revision: 11070
2008-05-08 01:30:14 +00:00
Andy Boyett 0ed1824fa1 Add a generic Broadcom USB profile.
SVN-Revision: 10695
2008-03-31 08:05:30 +00:00
Andy Boyett a2ccc5b790 Change WL500gP profile to use uhci-iv (#1589)
SVN-Revision: 10694
2008-03-31 08:05:13 +00:00
Andy Boyett c15de3860c Add support for the WL-500gP v2
SVN-Revision: 10693
2008-03-31 08:04:56 +00:00
Felix Fietkau 85a1127f2d add wrt350n image file
SVN-Revision: 10205
2008-01-16 03:39:59 +00:00
Florian Fainelli a4ca693c7e Add back Sitecom WL-105b support
SVN-Revision: 10142
2008-01-08 14:27:48 +00:00
Felix Fietkau 178721f76b update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly
SVN-Revision: 10137
2008-01-06 19:28:07 +00:00
Imre Kaloz f031f4c7dc bump version numbers of Linksys images
SVN-Revision: 10097
2008-01-03 21:28:56 +00:00
Florian Fainelli dc36fccfdc Add bcm5354 patch from #2754
SVN-Revision: 9684
2007-12-09 15:51:45 +00:00
Felix Fietkau bf0dd24627 create broadcom initramfs images and move the lzma decompressor area a bit further
SVN-Revision: 9556
2007-11-16 03:11:17 +00:00
Felix Fietkau 1bca0cc517 make the image filenames a bit shorter
SVN-Revision: 9533
2007-11-10 23:08:11 +00:00