Hauke Mehrtens
81e2f00367
kernel: update kernel to 3.10.15
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
Hauke Mehrtens
551a250e58
brcm47xx: fix detection of some boards
...
This adds some more boards.
This fixes parts of #14316 and #14133 .
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38383
2013-10-13 19:27:24 +00:00
Vasilis Tsiligiannis
aac26bfbca
ar71xx: Fix sysupgrade when upgrading to images with small rootfs partition
...
Signed-off-by: Vasilis Tsiligiannis <acinonyx@openwrt.gr>
SVN-Revision: 38382
2013-10-13 18:39:09 +00:00
Luka Perkov
8c2f571ddd
kirkwood: enable appended dtb (3.10.x)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38379
2013-10-13 03:35:13 +00:00
Luka Perkov
c808a4a7ef
ubifs: enable building modular images
...
Now it is possible to build ubi/ubifs images for only selected boards inside
single target.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38375
2013-10-12 21:44:48 +00:00
Jonas Gorski
06382c5b15
ar7: drop linux 3.9 support
...
Linux 3.9 is EOL since quite a while, no need to keep support for it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38370
2013-10-12 10:50:47 +00:00
Jonas Gorski
5ba5efcd9b
ar7: add support for linux 3.10 and switch to it
...
Run tested on WAG354Gv2.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38369
2013-10-12 10:50:44 +00:00
Jonas Gorski
c08dc5bffa
mvswitch: fix compilation for linux 3.10
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38368
2013-10-12 10:50:39 +00:00
Imre Kaloz
5f272ca813
make the generated images actually flashable on the Unifi devices.
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38364
2013-10-11 15:41:42 +00:00
Jo-Philipp Wich
0c2ce3f37a
x86: kvm: disable squashfs and jffs2 images by default
...
SVN-Revision: 38355
2013-10-10 14:40:52 +00:00
Hauke Mehrtens
a05d20a60f
kernel: add default config for ARM_ERRATA symbols for kernel 3.3
...
Commit r37470 did not add a default conig for the ARM_ERRATA symbols for kernel 3.3.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38352
2013-10-10 11:13:54 +00:00
John Crispin
b93e5498ae
ralink: fixes mpr a1/a2 network setup
...
Signed-off-by: Suschman <suschman@gmx.net>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38348
2013-10-09 10:08:52 +00:00
John Crispin
e382d2c7e6
ralink: add support for the mt7530 eval board
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38345
2013-10-08 21:10:15 +00:00
John Crispin
697bb191b0
ralink: add missing header file to mt7530 driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38344
2013-10-08 21:10:00 +00:00
John Crispin
654dfb1784
lantiq: fix up diag.sh
...
init no longer exists as a parameter
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38342
2013-10-08 15:28:33 +00:00
John Crispin
715b62ebad
lantiq: experia v8 fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38328
2013-10-07 15:03:00 +00:00
John Crispin
81fb43d2f1
lantiq: fix fritz3370 dts file
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38327
2013-10-07 15:02:56 +00:00
John Crispin
ae225124c6
lantiq: fix fritz image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38326
2013-10-07 15:02:52 +00:00
John Crispin
1398a5d849
lantiq: fix eva partition split for squashfs
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38325
2013-10-07 15:02:48 +00:00
John Crispin
c903de043e
ralink: fix asiarf image generation
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38324
2013-10-07 15:02:44 +00:00
John Crispin
ddcb800018
ralink: split mt7530 driver out of the gsw driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38323
2013-10-07 15:02:39 +00:00
John Crispin
c077698e38
ralink: build recovery images for dcs930 ip cam
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38322
2013-10-07 15:02:35 +00:00
John Crispin
420c62205b
ralink: DIR610A1 Fix remaining issues
...
This patch fixes:
- Ethernet and Wireless LEDs
- Wireless MAC Address
- Remove whitespaces from dts file
Signed-off-by: Flavio Silveira <fggs@terra.com.br>
SVN-Revision: 38321
2013-10-07 15:02:31 +00:00
John Crispin
5eacfc1c60
ralink: MT7620 eval board pinmux fixes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38320
2013-10-07 15:02:27 +00:00
John Crispin
cc58dd26d3
ralink: make cevt systick selectable via kconfig
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38319
2013-10-07 15:02:23 +00:00
John Crispin
baf9d53792
ralink: fix mt7620a pinmux
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38318
2013-10-07 15:02:18 +00:00
Hauke Mehrtens
64c2bc256c
brcm47xx: Cocci spatch "noderef"
...
sizeof when applied to a pointer typed expression gives the size of the
pointer.
Found by coccinelle spatch "misc/noderef.cocci"
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
SVN-Revision: 38312
2013-10-07 00:01:01 +00:00
Hauke Mehrtens
2402f8a9ee
brcm47xx: move clock detection patches
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38311
2013-10-07 00:00:10 +00:00
Hauke Mehrtens
4c193a30ce
brcm47xx: move and rename nvram gpio patch
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38310
2013-10-06 23:57:11 +00:00
Hauke Mehrtens
b201818044
brcm47xx: update early printk patches
...
Early printk was disabled because it caused hangs on some devices, the
old patches were using the CFE console now we use the normal serial
console, it is at a constant address.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38309
2013-10-06 23:55:35 +00:00
Hauke Mehrtens
ebf0778721
brcm47xx: update board detection patches
...
Add patches like they are currently in the mainline mips tree and add
some more pending patches for board detection.
* Now the board name is shown under machine in /proc/cpuinfo.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38308
2013-10-06 23:51:24 +00:00
Hauke Mehrtens
53a2c19c69
kernel: b53: add switch name into printk when it fails.
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38307
2013-10-06 22:35:28 +00:00
Hauke Mehrtens
2c5e4aa6ad
brcm47xx: b44: fix some problems with the phy
...
* do not try initialize a unused phy
* some improvements to the phylib patch
* do not turn the phy off when mac is off
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38306
2013-10-06 18:31:32 +00:00
Luka Perkov
fa3ab0c237
kirkwood: add support for UBI (3.10.x)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38301
2013-10-04 03:45:52 +00:00
Luka Perkov
60dd4429b7
imx6: update upstream pcie patches
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38298
2013-10-03 13:06:42 +00:00
Luka Perkov
5617993e10
kirkwood: enable dts compilation
...
In 3.10 we might build those, so for now just add this functionality.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38297
2013-10-03 02:50:03 +00:00
Luka Perkov
a30df8987d
kirkwood: fix initramfs images
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38296
2013-10-03 02:50:02 +00:00
Luka Perkov
38936426f7
kirkwood: update patches and configuration (3.10)
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38295
2013-10-03 02:50:00 +00:00
Hauke Mehrtens
97b15fc45b
brcm47xx: add support for ipv6 in default network config
...
Modify /etc/init.d/netconfig to use UCI defaults for building the
default network config, which includes appropriate defaults for IPV6.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38294
2013-10-02 23:22:18 +00:00
Hauke Mehrtens
9e5eeb3c38
kernel: bgmac: fix BCM4707 patch
...
The bool logic was the wrong way around.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38292
2013-10-02 23:12:46 +00:00
Hauke Mehrtens
101034fa23
kernel: refresh patches
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38291
2013-10-02 22:26:43 +00:00
Hauke Mehrtens
fa839274b0
kernel: bcma: update to wireless-testing master-2013-10-01
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38290
2013-10-02 22:26:15 +00:00
Hauke Mehrtens
125fc703bb
kernel: bgmac: move other bgmac patches to generic
...
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38289
2013-10-02 22:25:26 +00:00
Hauke Mehrtens
06c8b90ebf
kernel: bgmac: move bgmac patches already applied in mainline kernel to generic
...
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
These are only the patches already applied in current net-next/master
branch.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38288
2013-10-02 22:24:01 +00:00
Luka Perkov
8f1499c448
imx6: add default profile
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38282
2013-10-02 00:33:49 +00:00
Luka Perkov
0eb732c659
kirkwood: drop PROFILE from image names
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38281
2013-10-02 00:33:48 +00:00
Luka Perkov
0331657a4f
kirkwood: add linux 3.10 support
...
Backport appropriate patches to allow using device tree only board
defintions.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 38280
2013-10-02 00:33:47 +00:00
Luka Perkov
7d1e5ae918
kirkwood: prepare for 3.10
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38279
2013-10-02 00:33:45 +00:00
Luka Perkov
914ca3cb55
kirkwood: explicitly set CPU_TYPE to xscale
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38278
2013-10-02 00:33:43 +00:00
Hauke Mehrtens
20513fedf2
ep93xx: fix kmod-input-keyboard-ep93xx dependencies
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38275
2013-10-01 22:39:28 +00:00