Gabor Juhos
|
ff1e854511
|
kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
|
2012-11-18 08:41:31 +00:00 |
John Crispin
|
3991526989
|
ramips: use kernel 3.6.6
## Booting image at 80800000 ...
Image Name: MIPS OpenWrt Linux-3.6.6
Created: 2012-11-06 14:19:54 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 3560768 Bytes = 3.4 MB
Load Address: 80000000
Entry Point: 80000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32
Starting kernel ...
[ 0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[ 0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 02000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x01ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
[ 0.000000] Kernel command line: console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Writing ErrCtl register=0000c388
[ 0.000000] Readback ErrCtl register=0000c388
[ 0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:48
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.000000] console [ttyS1] enabled, bootconsole disabled
[ 0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[ 0.090000] pid_max: default: 32768 minimum: 301
[ 0.100000] Mount-cache hash table entries: 512
[ 0.110000] NET: Registered protocol family 16
[ 0.120000] MIPS: machine is Allnet ALL0239-3G
[ 0.140000] bio: create slab <bio-0> at 0
[ 0.150000] Switching to clocksource MIPS
[ 0.160000] NET: Registered protocol family 2
[ 0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.210000] TCP: reno registered
[ 0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.240000] NET: Registered protocol family 1
[ 5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 5.490000] msgmni has been set to 52
[ 5.500000] io scheduler noop registered
[ 5.510000] io scheduler deadline registered (default)
[ 5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[ 5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[ 5.560000] physmap platform flash device: 00800000 at bf000000
[ 5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[ 5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[ 5.610000] Amd/Fujitsu Extended Query version 1.3.
[ 5.620000] number of CFI chips: 1
[ 5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[ 5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[ 5.650000] 0x000000000000-0x000000030000 : "u-boot"
[ 5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[ 5.680000] 0x000000040000-0x000000050000 : "factory"
[ 5.690000] 0x000000050000-0x000000130000 : "kernel"
[ 5.700000] 0x000000130000-0x000000800000 : "rootfs"
[ 5.710000] mtd: partition "rootfs" set to be root filesystem
[ 5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[ 5.740000] 0x000000050000-0x000000800000 : "firmware"
[ 5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[ 5.780000] TCP: cubic registered
[ 5.780000] NET: Registered protocol family 17
[ 5.790000] 8021q: 802.1Q VLAN Support v1.8
[ 5.820000] Freeing unused kernel memory: 2676k freed
[ 6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -
Please press Enter to activate this console. [ 10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[ 10.170000] Backport based on wireless-testing.git master-2012-09-07
[ 10.180000] compat.git: wireless-testing.git
[ 10.210000] cfg80211: Calling CRDA to update world regulatory domain
[ 10.230000] cfg80211: World regulatory domain updated:
[ 10.240000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.250000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.270000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.280000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.300000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.310000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.430000] NET: Registered protocol family 10
[ 10.760000] PPP generic driver version 2.4.2
[ 10.820000] l2tp_core: L2TP core driver, V2.0
[ 10.840000] l2tp_netlink: L2TP netlink interface
[ 10.870000] sit: IPv6 over IPv4 tunneling driver
[ 10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.060000] NET: Registered protocol family 24
[ 11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[ 11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.510000] device eth0.1 entered promiscuous mode
[ 14.520000] device eth0 entered promiscuous mode
[ 14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[ 14.550000] br-lan: port 1(eth0.1) entered forwarding state
[ 14.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.560000] br-lan: port 1(eth0.1) entered forwarding state
[ 16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33
BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
BARRIER BREAKER (Bleeding Edge, r34079)
-----------------------------------------------------
* 1/2 oz Galliano Pour all ingredients into
* 4 oz cold Coffee an irish coffee mug filled
* 1 1/2 oz Dark Rum with crushed ice. Stir.
* 2 tsp. Creme de Cacao
-----------------------------------------------------
root@OpenWrt:/#
SVN-Revision: 34111
|
2012-11-07 20:26:21 +00:00 |
John Crispin
|
a4d96aae8d
|
bump to 3.3.8
SVN-Revision: 32055
|
2012-06-05 06:57:51 +00:00 |
Gabor Juhos
|
2ae5581447
|
kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
|
2012-05-23 21:05:32 +00:00 |
Gabor Juhos
|
b472e5d12e
|
kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
|
2012-05-14 09:18:32 +00:00 |
Gabor Juhos
|
34018a630f
|
kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
|
2012-05-07 20:11:43 +00:00 |
Gabor Juhos
|
cbfce53831
|
kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
|
2012-04-30 08:38:11 +00:00 |
Jonas Gorski
|
8fd383ae2e
|
kernel: update linux 3.3 to 3.3.3
SVN-Revision: 31460
|
2012-04-24 09:25:38 +00:00 |
Gabor Juhos
|
6c8ca78067
|
ramips: switch to 3.3.2
SVN-Revision: 31404
|
2012-04-21 12:30:51 +00:00 |
Gabor Juhos
|
6b677e1d22
|
ramips: add swconfig to the default package list
SVN-Revision: 31398
|
2012-04-21 12:30:43 +00:00 |
Jonas Gorski
|
a8f2bc682e
|
kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.
SVN-Revision: 31337
|
2012-04-17 13:12:14 +00:00 |
Jonas Gorski
|
16b4cbcdd6
|
kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
|
2012-04-09 14:48:51 +00:00 |
Jonas Gorski
|
d87efd8c3c
|
kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).
SVN-Revision: 31158
|
2012-04-01 07:56:55 +00:00 |
Gabor Juhos
|
c1dc6df8bd
|
kernel: update linux 3.2 to 3.2.12
SVN-Revision: 31028
|
2012-03-19 18:23:31 +00:00 |
Gabor Juhos
|
9698a499b6
|
kernel: update linux 3.2 to 3.2.9
SVN-Revision: 30767
|
2012-03-01 19:49:02 +00:00 |
Gabor Juhos
|
e532fa5fd4
|
ramips: add preliminary support for the RT3662/RT3883 SoCs
SVN-Revision: 30495
|
2012-02-13 15:17:59 +00:00 |
Gabor Juhos
|
a287c60a61
|
ramips: add initial support for 3.2
SVN-Revision: 30476
|
2012-02-12 12:52:14 +00:00 |
Gabor Juhos
|
32b9e8c750
|
ramips: use gpio-keys-polled instead of gpio-buttons
SVN-Revision: 30461
|
2012-02-11 19:37:06 +00:00 |
Gabor Juhos
|
7c678e7511
|
ramips: fix package name of kmod-input-gpio-buttons
Based on a patch from Omnima Limited.
SVN-Revision: 29379
|
2011-12-01 22:48:39 +00:00 |
Gabor Juhos
|
2ed38b24a8
|
ramips: move kmod-rt2800-pci to DEFAULT_PACKAGES
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 29378
|
2011-12-01 22:48:38 +00:00 |
Gabor Juhos
|
f8ab604eb6
|
ramips: fix typo in default packages
Fix fivebytepypo - there is no such kernel module wpad-mini :)
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 28049
|
2011-08-19 15:55:05 +00:00 |
Hauke Mehrtens
|
09b1073f9b
|
kernel: update kernel to version 2.6.39.4
SVN-Revision: 28022
|
2011-08-16 22:04:10 +00:00 |
Gabor Juhos
|
17c041cd0b
|
ramips: add maccalc to the default package list
SVN-Revision: 28005
|
2011-08-15 18:55:52 +00:00 |
Gabor Juhos
|
67e480971c
|
ramips: add input drivers to the default package list
SVN-Revision: 28003
|
2011-08-15 18:55:50 +00:00 |
Gabor Juhos
|
2fc6be00f4
|
ramips: switch to 2.6.39.2
SVN-Revision: 27397
|
2011-07-03 15:02:07 +00:00 |
Hauke Mehrtens
|
50c743e79e
|
kernel: Update to version 2.6.37.6
Thank you Peter Wagner for the patch
SVN-Revision: 26441
|
2011-04-03 13:59:07 +00:00 |
Gabor Juhos
|
90d37adb8d
|
ramips: switch to 2.6.37
SVN-Revision: 26328
|
2011-03-27 19:20:04 +00:00 |
Felix Fietkau
|
335877a2b3
|
global cflags: remove -funit-at-a-time, it is ignored by recent compilers. instead add -fno-caller-saves, which improves compression ratio for generated code with no apparent negative effects on performance
SVN-Revision: 26300
|
2011-03-26 01:07:12 +00:00 |
Florian Fainelli
|
45c9f5e75e
|
update to kernel 2.6.36.4
SVN-Revision: 25580
|
2011-02-19 12:44:07 +00:00 |
Gabor Juhos
|
1403850be1
|
ramips: switch to 2.6.36
SVN-Revision: 24561
|
2010-12-14 08:00:29 +00:00 |
Imre Kaloz
|
5f9a6a5431
|
upgrade kernel versions to the latest stable ones
SVN-Revision: 23219
|
2010-10-04 10:40:41 +00:00 |
Hauke Mehrtens
|
09e05d833d
|
kernel: update kernel version to 2.6.34.5
SVN-Revision: 22759
|
2010-08-22 13:26:06 +00:00 |
Hauke Mehrtens
|
e2ce2feedb
|
kernel: update to kernel 2.6.34.1
SVN-Revision: 22118
|
2010-07-10 22:39:52 +00:00 |
John Crispin
|
0ab7d18462
|
update to 2.6.34, signed of by russiane39, thx
SVN-Revision: 21573
|
2010-05-26 15:53:05 +00:00 |
Hauke Mehrtens
|
b18a1d217b
|
kernel: update kernel to version 2.6.32.13 and 2.6.33.4
SVN-Revision: 21540
|
2010-05-23 13:16:51 +00:00 |
Alexandros C. Couloumbis
|
fdac9ae836
|
sync to kernel 2.6.32.12
SVN-Revision: 21195
|
2010-04-27 14:30:08 +00:00 |
Nicolas Thill
|
37b02afe6a
|
package/kernel: use common gpio- & wdt- prefixes for GPIO and watchdog module names
SVN-Revision: 21137
|
2010-04-24 14:08:49 +00:00 |
Gabor Juhos
|
0abc7e6d53
|
ramips: add wpad-mini to the default packages
SVN-Revision: 20632
|
2010-03-31 09:58:33 +00:00 |
Gabor Juhos
|
e66a368bd1
|
kernel: update to 2.6.32.10
SVN-Revision: 20444
|
2010-03-26 10:45:25 +00:00 |
Hauke Mehrtens
|
0c7b285613
|
kernel: update to kernel 2.6.32.9
SVN-Revision: 19890
|
2010-02-28 10:16:47 +00:00 |
Travis Kemen
|
5c75e1dd02
|
update kernel from 2.6.32.7 to 2.6.32.8, thanks tripolar
SVN-Revision: 19591
|
2010-02-12 01:12:11 +00:00 |
Gabor Juhos
|
c9d8869d1b
|
ramips: switch to 2.6.32
SVN-Revision: 19441
|
2010-01-31 12:48:41 +00:00 |
Florian Fainelli
|
a47b8566a1
|
update to 2.6.30, refresh patches
SVN-Revision: 18635
|
2009-12-04 14:52:45 +00:00 |
John Crispin
|
1729f7bdc1
|
use gpio_led package rather than staticly linking it into the kernel
SVN-Revision: 18154
|
2009-10-25 18:08:16 +00:00 |
Florian Fainelli
|
d4b251bdb8
|
update to 2.6.30.9
SVN-Revision: 18126
|
2009-10-23 12:10:25 +00:00 |
Gabor Juhos
|
054c54512f
|
kernel: upgrade to 2.6.30.8 and refresh patches
SVN-Revision: 17804
|
2009-10-01 10:07:32 +00:00 |
Felix Fietkau
|
dc12314e83
|
ramips: since both subtargets are marked as broken, move FEATURES to the main target and mark the whole target as broken. avoids unnecessary user confusion about inexplicable build failures
SVN-Revision: 17728
|
2009-09-25 21:01:42 +00:00 |
Imre Kaloz
|
85fcc97a13
|
update to latest 2.6.27 and 2.6.30 kernels
SVN-Revision: 17602
|
2009-09-17 11:22:33 +00:00 |
Florian Fainelli
|
3ce53b8d92
|
update to 2.6.30.6, compile tested on some targets only
SVN-Revision: 17549
|
2009-09-09 07:35:06 +00:00 |
Gabor Juhos
|
051c44e0c5
|
initial support for RT288x/RT305x
SVN-Revision: 17439
|
2009-08-30 19:15:51 +00:00 |