Commit Graph

19045 Commits (80221fcd2a66e6a1a4ebd79d98ae881a549fc521)

Author SHA1 Message Date
Gabor Juhos e52269364a ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
SVN-Revision: 29108
2011-11-14 11:49:53 +00:00
Gabor Juhos 3104d70552 ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
SVN-Revision: 29107
2011-11-14 11:49:51 +00:00
Gabor Juhos 42e8ae09b5 ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
SVN-Revision: 29106
2011-11-14 11:49:49 +00:00
Gabor Juhos c15caea360 ar71xx: add an irq parameter for ar724x_pcibios_init
SVN-Revision: 29105
2011-11-14 11:49:47 +00:00
Gabor Juhos cf90b24bb9 ar71xx: remove hardwired interface parameters from mach-* files
SVN-Revision: 29103
2011-11-14 07:38:09 +00:00
Gabor Juhos defc79cb40 ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
SVN-Revision: 29102
2011-11-14 07:38:07 +00:00
Gabor Juhos 6f4bc1ce37 ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
SVN-Revision: 29101
2011-11-14 07:38:05 +00:00
Florian Fainelli 7f787707de build images for Pirelli A226M (#10409)
SVN-Revision: 29045
2011-11-13 19:19:22 +00:00
Florian Fainelli 5dc2098448 register uart0 on DWV-S0 boards (#10409)
SVN-Revision: 29044
2011-11-13 19:19:18 +00:00
Florian Fainelli 56a96ba876 refresh 3.0 patches
SVN-Revision: 29043
2011-11-13 19:19:14 +00:00
Florian Fainelli 54da5cf11f refresh 2.6.39 patches
SVN-Revision: 29042
2011-11-13 19:19:10 +00:00
Florian Fainelli 717a4391d7 rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
SVN-Revision: 29041
2011-11-13 19:19:05 +00:00
Florian Fainelli c093c9df34 fix typo, load ip17xx switch module
SVN-Revision: 29039
2011-11-13 18:41:26 +00:00
Gabor Juhos 368bbc510b ar71xx: enable has_gbit flag on AR724{0,1}
SVN-Revision: 29026
2011-11-13 17:36:36 +00:00
Gabor Juhos 15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board
SVN-Revision: 29022
2011-11-13 12:48:03 +00:00
Gabor Juhos f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
SVN-Revision: 29021
2011-11-13 12:48:01 +00:00
John Crispin f4f326699b madwifi: rename patch from ifxmips -> lantiq
SVN-Revision: 29020
2011-11-13 12:10:52 +00:00
John Crispin 0096aa78b2 uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>

SVN-Revision: 29019
2011-11-13 12:09:34 +00:00
Jonas Gorski 14482ced5e include/kernel.mk: don't check for modules.builtin on 2.6.32-
modules.builtin is only available in 2.6.33 and later, so fall back to
assuming it's built-in for older kernels.

SVN-Revision: 29018
2011-11-13 11:45:09 +00:00
Gabor Juhos d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status
SVN-Revision: 29017
2011-11-13 11:27:04 +00:00
Gabor Juhos d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices
SVN-Revision: 29016
2011-11-13 11:27:03 +00:00
Gabor Juhos 34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
SVN-Revision: 29015
2011-11-13 11:27:01 +00:00
Gabor Juhos 2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines
SVN-Revision: 29014
2011-11-13 11:27:00 +00:00
Gabor Juhos 538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks
SVN-Revision: 29013
2011-11-13 11:26:59 +00:00
Gabor Juhos 93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.

SVN-Revision: 29012
2011-11-13 11:26:57 +00:00
Gabor Juhos 9579bb4267 ar71xx: ag71xx: remove MII interface setup code
SVN-Revision: 29011
2011-11-13 11:26:56 +00:00
Gabor Juhos da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
SVN-Revision: 29010
2011-11-13 11:26:54 +00:00
Gabor Juhos 0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
2011-11-13 11:26:52 +00:00
Gabor Juhos 1afc76ea13 ar71xx: refresh kernel patches
SVN-Revision: 29008
2011-11-13 11:26:51 +00:00
Jonas Gorski d8acb75009 linux: update 3.1 to 3.1.1
SVN-Revision: 29007
2011-11-13 10:48:05 +00:00
John Crispin a8797d0de6 lantiq: add uci-defaults code for handling leds
SVN-Revision: 29004
2011-11-12 23:40:21 +00:00
John Crispin 832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it
SVN-Revision: 29003
2011-11-12 23:40:16 +00:00
John Crispin 5dcbbf0160 lantiq: rename leds
SVN-Revision: 29002
2011-11-12 23:40:12 +00:00
John Crispin d84b7596d9 lantiq: split compat headers out of bsp header patch
SVN-Revision: 29001
2011-11-12 23:40:07 +00:00
John Crispin 2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware
SVN-Revision: 29000
2011-11-12 23:40:01 +00:00
John Crispin 3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it
SVN-Revision: 28999
2011-11-12 23:39:56 +00:00
John Crispin 4248705108 lantiq: cleanup default package selection
SVN-Revision: 28998
2011-11-12 23:39:51 +00:00
John Crispin eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
SVN-Revision: 28994
2011-11-12 18:41:15 +00:00
Gabor Juhos bbfaaeffd6 kernel: ar8216: add support for the AR8236 switch
SVN-Revision: 28993
2011-11-12 14:09:52 +00:00
Gabor Juhos ecb3690d0a kernel: ar8216: move port vlan setup into a separate function
SVN-Revision: 28992
2011-11-12 14:09:50 +00:00
Nicolas Thill b49aed1520 package/base-files: enhance service functions
* allow matching process by name (useful for processes changing it)
 * check if first argument is executable
 * fix function name used in error messages

SVN-Revision: 28991
2011-11-12 13:53:15 +00:00
Gabor Juhos 5ad763075e ar71xx: use the button for WPS control on the DB120
SVN-Revision: 28990
2011-11-12 12:50:20 +00:00
Gabor Juhos 4555be2bec ar71xx: register the second ethernet interface on the DB120 board
SVN-Revision: 28989
2011-11-12 12:50:19 +00:00
Gabor Juhos 368c6605a0 ar71xx: implement SoC specific phy interface setup
SVN-Revision: 28988
2011-11-12 12:50:18 +00:00
Gabor Juhos 21d317b9cc ar71xx: move phy interface setup into a separate function
SVN-Revision: 28987
2011-11-12 12:50:16 +00:00
Gabor Juhos aff0c84ffa ar71xx: register both MDIO bus on the DB120 board
SVN-Revision: 28986
2011-11-12 12:09:59 +00:00
Gabor Juhos b144249108 ar71xx: add AR934X specific MDIO registration code
SVN-Revision: 28985
2011-11-12 12:09:56 +00:00
Gabor Juhos f835106c8c ar71xx: add a secondary mdio bus
SVN-Revision: 28984
2011-11-12 12:09:54 +00:00
Gabor Juhos 90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
SVN-Revision: 28983
2011-11-12 12:09:50 +00:00
Gabor Juhos 9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio
SVN-Revision: 28982
2011-11-12 12:09:48 +00:00