Daniel Dickinson
|
eadb5c84fa
|
imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above).
SVN-Revision: 24011
|
2010-11-16 06:46:53 +00:00 |
Claudio Mignanti
|
7583fe8668
|
Add wps button on alice gate
SVN-Revision: 23903
|
2010-11-06 21:08:44 +00:00 |
Imre Kaloz
|
0a5da348d1
|
update kernels to 2.6.32.25 and 2.6.35.8
SVN-Revision: 23851
|
2010-11-04 09:01:08 +00:00 |
Florian Fainelli
|
ffc84cf75c
|
register uart driver on livebox (#8013)
SVN-Revision: 23653
|
2010-10-27 10:02:13 +00:00 |
Florian Fainelli
|
7bf5647070
|
refresh 2.6.35 patches
SVN-Revision: 23652
|
2010-10-27 10:02:08 +00:00 |
Claudio Mignanti
|
697d3e7066
|
Fix nxp_74hc164 driver compile error (builbot)
SVN-Revision: 23623
|
2010-10-24 16:10:41 +00:00 |
Florian Fainelli
|
20d28f7685
|
fix platform_devices registration
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>
SVN-Revision: 23517
|
2010-10-18 19:49:54 +00:00 |
Florian Fainelli
|
af0e5167bc
|
add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558)
SVN-Revision: 23508
|
2010-10-17 17:45:50 +00:00 |
Florian Fainelli
|
9d9e3fed62
|
remove 2.6.32 support
SVN-Revision: 23505
|
2010-10-17 16:32:35 +00:00 |
Florian Fainelli
|
a1ea84dbb6
|
fix SPI driver, move register out of driver code
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com
SVN-Revision: 23504
|
2010-10-17 14:09:30 +00:00 |
Florian Fainelli
|
1a13c39f76
|
restore kernel oldconfig
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23503
|
2010-10-17 14:09:24 +00:00 |
Florian Fainelli
|
265bf2ccb0
|
refresh patches
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23502
|
2010-10-17 14:09:04 +00:00 |
Florian Fainelli
|
9f4c51acb7
|
refresh nb4 support. Register 74x164 device
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23501
|
2010-10-17 14:08:57 +00:00 |
Florian Fainelli
|
8cbd9d5a2e
|
add spi devices board info int bcm63xx_boards
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23500
|
2010-10-17 14:08:51 +00:00 |
Florian Fainelli
|
b65e494976
|
add 74x164 SPI chip support
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23499
|
2010-10-17 14:08:45 +00:00 |
Florian Fainelli
|
cd9b90235c
|
backport SPI master with no RXTX support (from 2.6.36)
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23498
|
2010-10-17 14:08:39 +00:00 |
Florian Fainelli
|
d5854cfd4d
|
register earlier extended platform devices
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>
SVN-Revision: 23497
|
2010-10-17 14:08:34 +00:00 |
Lars-Peter Clausen
|
83d6a36019
|
update 2.6.35.x to 2.6.35.7
SVN-Revision: 23213
|
2010-10-04 07:42:32 +00:00 |
Florian Fainelli
|
bbca651e1b
|
remove wpa-supplicant and iw from the Tecom GW6x00 profile
SVN-Revision: 23051
|
2010-09-13 08:30:35 +00:00 |
Florian Fainelli
|
d3e206ad96
|
default to using 2.6.35
SVN-Revision: 23038
|
2010-09-12 21:23:53 +00:00 |
Florian Fainelli
|
dc1302fdf9
|
remove 2.6.33 support
SVN-Revision: 23037
|
2010-09-12 21:23:47 +00:00 |
Florian Fainelli
|
327ac42dca
|
change the Tecom GW6x00 profile to use wl instead of b43
SVN-Revision: 23036
|
2010-09-12 21:23:41 +00:00 |
Florian Fainelli
|
f4f789f211
|
register udc and spi devices at the correct init level
SVN-Revision: 23035
|
2010-09-12 21:23:35 +00:00 |
Florian Fainelli
|
fab2e77357
|
refresh 2.6.35 patches
SVN-Revision: 23034
|
2010-09-12 21:23:29 +00:00 |
Jo-Philipp Wich
|
867ac59ff9
|
enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx
SVN-Revision: 22846
|
2010-08-30 22:59:20 +00:00 |
Florian Fainelli
|
2e343d9760
|
add 2.6.35 support
SVN-Revision: 22800
|
2010-08-25 19:56:08 +00:00 |
Florian Fainelli
|
b1becffa5b
|
update to 2.6.32.20
SVN-Revision: 22766
|
2010-08-22 17:07:37 +00:00 |
Daniel Dickinson
|
a5fdf57a1b
|
base-files: diag.sh: For power button as preinit status led, end with led left on, not off
SVN-Revision: 22466
|
2010-08-02 19:33:08 +00:00 |
Daniel Dickinson
|
d391ca2c8c
|
base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit
SVN-Revision: 22465
|
2010-08-02 19:32:59 +00:00 |
Daniel Dickinson
|
99d0f9ea05
|
patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32
SVN-Revision: 22464
|
2010-08-02 19:32:40 +00:00 |
Jo-Philipp Wich
|
00cc52f14b
|
reorder profiles
SVN-Revision: 22390
|
2010-07-26 18:58:35 +00:00 |
Jo-Philipp Wich
|
7831006360
|
fix a typo in 040-bcm963xx_flashmap.patch
SVN-Revision: 22386
|
2010-07-25 00:10:37 +00:00 |
Imre Kaloz
|
ca8f45b142
|
update kernel versions
SVN-Revision: 22289
|
2010-07-19 11:34:03 +00:00 |
Florian Fainelli
|
f6935a4bdb
|
fix alice gate2 internet:green led (#6743)
SVN-Revision: 22273
|
2010-07-18 10:29:44 +00:00 |
Jo-Philipp Wich
|
abdf25b045
|
add required exports for wl.ko
SVN-Revision: 22174
|
2010-07-13 17:03:56 +00:00 |
Claudio Mignanti
|
2d86ea7bf3
|
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
SVN-Revision: 22145
|
2010-07-12 14:06:13 +00:00 |
Jo-Philipp Wich
|
1650f33f97
|
add a wifi profile for proprietary wl
SVN-Revision: 22009
|
2010-07-01 01:39:04 +00:00 |
Florian Fainelli
|
fb94196462
|
add missing alice gate2 leds (#6743)
SVN-Revision: 21785
|
2010-06-13 12:20:53 +00:00 |
Florian Fainelli
|
145fd381d7
|
do not override cfg80211-related config symbols
SVN-Revision: 21769
|
2010-06-12 18:10:16 +00:00 |
Gabor Juhos
|
9bc1e548a1
|
generic: move more common options to generic configuration
* CONFIG_ABX500_CORE
* CONFIG_ATOMIC64_SELFTEST
* CONFIG_BRIDGE_IGMP_SNOOPING
* CONFIG_CAIF
* CONFIG_CEPH_FS
* CONFIG_CRYSTALHD
* CONFIG_DEFAULT_SECURITY_SELINUX
* CONFIG_DEFAULT_SECURITY_SMACK
* CONFIG_DEFAULT_SECURITY_TOMOYO
* CONFIG_DT3155
* CONFIG_IP_MROUTE_MULTIPLE_TABLES
* CONFIG_L2TP
* CONFIG_LOGFS
* CONFIG_LPC_SCH
* CONFIG_MFD_JANZ_CMODIO
* CONFIG_MFD_RDC321X
* CONFIG_N_GSM
* CONFIG_RAMOOPS
* CONFIG_SERIAL_ALTERA_JTAGUART
* CONFIG_SERIAL_ALTERA_UART
* CONFIG_SERIAL_TIMBERDALE
* CONFIG_SM_FTL
* CONFIG_SQUASHFS_XATTRS
SVN-Revision: 21750
|
2010-06-10 10:45:51 +00:00 |
Gabor Juhos
|
2f328ce488
|
generic: move some common symbols to generic configuration
* CONFIG_MUTEX_SPIN_ON_OWNER
* CONFIG_DEFAULT_HYDLA
* CONFIG_DEFAULT_VENO
SVN-Revision: 21748
|
2010-06-10 08:58:14 +00:00 |
Gabor Juhos
|
5cad9d5c73
|
generic: standardize CONFIG_INLINE_* symbols usage
SVN-Revision: 21746
|
2010-06-10 08:09:41 +00:00 |
Daniel Dickinson
|
f296eeab53
|
brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design)
SVN-Revision: 21631
|
2010-05-30 02:04:56 +00:00 |
Daniel Dickinson
|
6a267cfa76
|
brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods
SVN-Revision: 21630
|
2010-05-30 01:44:37 +00:00 |
Daniel Dickinson
|
40c53c6556
|
brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21629
|
2010-05-30 01:33:20 +00:00 |
Daniel Dickinson
|
82edb6eafa
|
brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21628
|
2010-05-30 01:33:09 +00:00 |
Daniel Dickinson
|
cc8fba8441
|
brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00)
SVN-Revision: 21627
|
2010-05-30 01:32:58 +00:00 |
Daniel Dickinson
|
bd8cfa63f4
|
brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00)
SVN-Revision: 21626
|
2010-05-30 01:32:47 +00:00 |
Nicolas Thill
|
e74e289fa8
|
update linux kernel to 2.6.32.14
SVN-Revision: 21583
|
2010-05-27 18:09:09 +00:00 |
Nicolas Thill
|
46e2eea1ef
|
target/linux: refresh 2.6.32 patches
SVN-Revision: 21566
|
2010-05-24 20:35:46 +00:00 |