5f3f1b8cd8
ar71xx: Configure WNDR3700 switch LED colors properly ( #8103 )
...
For WNDR3700, use green for 1Gb/s and amber for 100Mb/s and 10Mb/s on
the four LAN port switch LEDs. The LEDs will be lit to indicate a link
and will blink to indicate activity. This matches the stock firmware
and the description printed on the label on the unit's underside.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23879
2010-11-04 18:55:16 +00:00
b3b2227869
Revert "ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )" on submitter's request
...
SVN-Revision: 23878
2010-11-04 18:53:18 +00:00
77eee74d56
ar71xx: WNDR3700 WiFi LEDs should blink for activity ( #7984 )
...
Make the WiFi LEDs blink for activity on the WNDR3700, matching the
stock firmware and user expectations. The green 2.4GHz and blue 5GHz
LEDs will illuminate with the radio on, and will blink to indicate
transmission and reception.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 23877
2010-11-04 18:48:22 +00:00
fc035b3cb6
ar71xx: remove dev-ap91-eth.c. switch its only user (RB-750) to the new switch driver
...
SVN-Revision: 23439
2010-10-14 13:41:42 +00:00
3941621dbc
ar71xx: use the new ar7240 switch driver on the DIR-600-A1 as well ( fixes #7563 )
...
SVN-Revision: 23432
2010-10-14 00:14:59 +00:00
697f5d0bdd
ar71xx: initial support for jjPlus JWAP003
...
Patch-by: Cezary Jackiewicz <cezary@eko.one.pl>
(the GPIODEV code has been removed, the sysfs interface
can be used to control the GPIO lines instead - juhosg)
SVN-Revision: 23165
2010-10-01 07:09:29 +00:00
32d12d5e5c
ar71xx: add support for the TL-MR3420 v1 board
...
SVN-Revision: 23136
2010-09-27 14:53:59 +00:00
a7bb7dd99e
Add support for Atheros AP96 reference board
...
This is still preliminary and not really tested much. Anyway, this
version seems to be enough to get both wired and wireless
interfaces working. Buttons and leds are also working.
mach-ap96.c is based on mach-wndr3700.c.
Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
SVN-Revision: 23125
2010-09-27 08:59:53 +00:00
b4336a8e2d
ar71xx: add support for the Zcomax ZCN-1523H-2-8/5-16 boards
...
SVN-Revision: 22882
2010-09-03 18:14:37 +00:00
523fcf0497
ar71xx: add a new driver for the ar7240 switch using swconfig. hooks directly into the ethernet driver, as MAC resets also require switch reinitializations and the switch is part of the cpu core anyway switch only tl-wr741nd (and other devices using this board file, such as tl-wr841nd) over to using this by default, as other devices are still untested fixes #7563
...
SVN-Revision: 22675
2010-08-16 19:21:57 +00:00
e35f7ef51d
ar71xx: add eap7660d board to diag.sh and sysupgrade
...
This patch adds support for the Senao EAP7660D board to diag.sh and sysupgrade.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 22644
2010-08-14 21:07:31 +00:00
9aef272f4a
linux/ar71xx: add nanostation-m signature (thanks Antonio Anselmi)
...
SVN-Revision: 22631
2010-08-14 07:48:05 +00:00
6616951c15
add uci-defaults script to migrate vlan 0 to vlan 1 after sysupgrade on devices using the RTL8366s switch
...
SVN-Revision: 22625
2010-08-13 19:29:51 +00:00
4ee3ae96c2
ar71xx: fix sysupgrade on the ubnt nanostation m
...
SVN-Revision: 22370
2010-07-23 18:16:47 +00:00
900aaa919b
ar71xx: add support for the tp-link tl-wa901nd devices (patch by Pieter "Fate" Hollants, from #7528 , without the ethernet fifo cfg values)
...
SVN-Revision: 22353
2010-07-22 12:37:44 +00:00
d6d8014cfd
fix dir-825-b1 default network config after r21905
...
SVN-Revision: 22005
2010-07-01 00:03:43 +00:00
e827a12c48
ar71xx: don't use vlan 0 for devices with rtl8366s switch
...
SVN-Revision: 21905
2010-06-26 19:15:32 +00:00
7bff9c0101
ar71xx: add support for the Senao EAP7660D board
...
This patch adds support for the Senao EAP7660D board to trunk.
Signed-off-by: Daniel Golle <daniel.golle@gmail.com>
SVN-Revision: 21837
2010-06-18 16:22:05 +00:00
518f43efd8
ar71xx: fix RB750 LED configuration
...
Patch-by: Ray Bellis
SVN-Revision: 21826
2010-06-17 09:24:26 +00:00
b86e4e1c6a
ar71xx: add default network config for the RB433UAH board
...
SVN-Revision: 21765
2010-06-12 13:20:41 +00:00
3045632eb0
ar71xx: add default network configuration file for the RB450/RB433 boards
...
SVN-Revision: 21730
2010-06-08 20:19:23 +00:00
6bccc41f6c
ar71xx: Added preinit scriptlet to set vars based on cpuinfo during preinit_main. This fixes a bug in which the vars were not set due to /proc not being mounted when ar71xx.sh was sourced
...
SVN-Revision: 21634
2010-05-30 03:20:49 +00:00
65dba323f7
ar71xx: Make wget2nand fail if copying the kernel fails and use the correct file extension for the rootfs image
...
wget2nand didnt check the exit status after copying the kernel, if the
copying failed for some reason ( for example not enougs space on the
kernel partition) it simply continued extracting the rootfs.
I also changed the filename, which wget2nand trys to download (
.tar.gz instead of .tgz ).
Signed-off-by: Marko Foerster <mrkfoerster@googlemail.com>
SVN-Revision: 21444
2010-05-14 08:38:39 +00:00
d6c0363884
ar71xx: make the AR8216 driver usable on the TEW-632BRP/DIR-615-Cx boards
...
Cc: backfire@openwrt.org
SVN-Revision: 20752
2010-04-09 08:40:09 +00:00
23bebe33a7
Add support for the ar8316 switch. This patch enhances the ar8216 driver with ar8316 support and fixes some minor issues with the ar8216 driver itself. It should not break anything, but isn't tested on ar8216 devices.
...
[PATCH 2/2] ar71xx: Add the ar8316 driver to rs pro/rb-450g.
Add the ar8216 driver to the ar71xx target, and add network
configurations for the RouterStation Pro and the RouterBoard RB-450G.
SVN-Revision: 20722
2010-04-05 23:03:16 +00:00
8701291f0f
ar71xx: add uci defaults to fix trx header on the WRT160NL boards
...
* patch by Otto Solares
SVN-Revision: 20526
2010-03-27 17:38:40 +00:00
35bb7be34d
ar71xx: Add basic WLAN LED control to TL-WR1043ND
...
* thanks to KillaB
* closes #6834
SVN-Revision: 20415
2010-03-25 07:31:17 +00:00
0095ab73f3
ar71xx: fix defconfig script to work with ImageBuilder
...
* patch from #5722
SVN-Revision: 20231
2010-03-15 13:29:16 +00:00
ed3aca86a6
ar71xx: don't break the existing network configuration in the wget2nand script
...
SVN-Revision: 20228
2010-03-15 11:03:33 +00:00
9daf566ddc
ar71xx: fix sysupgrade on the LS-SR71 board
...
SVN-Revision: 20119
2010-03-10 17:41:45 +00:00
eaccbd3fb8
ar71xx: add default network configuration for the PB44 board
...
SVN-Revision: 20099
2010-03-09 18:05:58 +00:00
18ee1b6dda
ar71xx: add uci-defaults for the RB750 board
...
SVN-Revision: 20097
2010-03-09 18:05:51 +00:00
b21308313e
ar71xx: override lan port names on the RB750
...
SVN-Revision: 20096
2010-03-09 18:05:48 +00:00
781c482e6a
ar71xx: improve wget2nand script
...
SVN-Revision: 20094
2010-03-09 18:05:42 +00:00
4d5a9fe402
ar71xx: add missing protocol definitions to default network configurations
...
SVN-Revision: 20091
2010-03-09 18:05:31 +00:00
5e8c8818ed
ar71xx: add preliminary support for the RouterBOARD 750
...
SVN-Revision: 20029
2010-03-07 05:41:01 +00:00
52f03512dc
ar71xx: fix sysupgrade on the WRT400N (thanks to chuljin)
...
* closes #6782
SVN-Revision: 20006
2010-03-05 20:29:27 +00:00
7bda582cf7
ar71xx: fix status led detection on the RB4xx boards
...
SVN-Revision: 20005
2010-03-05 20:29:24 +00:00
e1bb4af48b
ar71xx: add default network configuration file for the TL-WR741ND board
...
SVN-Revision: 19930
2010-03-01 07:34:48 +00:00
3f7d3dc939
ar71xx: add default network configuration file for the DIR-600 rev. A1 board
...
SVN-Revision: 19929
2010-03-01 07:34:46 +00:00
a6be62a4f1
ar71xx: add default network configuration file for the TL-WR1043ND board
...
Thanks to Andrew Tarabaras.
SVN-Revision: 19840
2010-02-24 13:39:20 +00:00
187d5546db
ar71xx: use the correct name for the status LED on the WRT400 board (thanks to chuljin, patch from #6734 )
...
SVN-Revision: 19831
2010-02-24 13:38:37 +00:00
560f7173b2
ar71xx: update default network configuration file for the WNDR3700
...
Signed-off-by: Scott Dudley <spmsink@hotmail.com>
SVN-Revision: 19830
2010-02-24 13:38:31 +00:00
47990f61fb
ar71xx: add uci configuration for the WAN LED on the WNDR3700
...
Based on a patch by Scott Dudley <spmsink@hotmail.com>
SVN-Revision: 19746
2010-02-19 11:52:25 +00:00
0e84ed29ea
preinit: fix mixup between led and reset button enable on some platforms (thx, cshore)
...
SVN-Revision: 19370
2010-01-28 19:28:02 +00:00
56bc02a305
add preinit modularization work by Daniel Dickinson (cshore)
...
SVN-Revision: 19331
2010-01-25 17:11:17 +00:00
2b5ba9073f
rtl8366_smi: move RTL8366S driver into a separate file
...
SVN-Revision: 19279
2010-01-22 17:38:07 +00:00
b9328f2e04
ar71xx: change failsafe message
...
SVN-Revision: 19221
2010-01-18 09:15:35 +00:00
a9c5e3159f
ar71xx: update default network configuration for the WNDR3700/DIR-825-B1
...
Also drop the default network configuration of the TL-WR1043ND, because
the RTL8366RB switch is not yet supported by the rtl8366-smi driver.
SVN-Revision: 19217
2010-01-18 09:01:47 +00:00
a86a28841c
ar71xx: add some default configs for rtl8366 based devices
...
SVN-Revision: 19210
2010-01-18 00:44:52 +00:00
Felix Fietkau
Gabor Juhos
Alexandros C. Couloumbis
Jo-Philipp Wich
Daniel Dickinson