hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
15,891 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

361 Commits (7fd7db898171f7ca559e861a7b26d9c606f9f279)

Author SHA1 Message Date
Florian Fainelli d0fdf2c5ed fix comment only valid for bcm6345 
SVN-Revision: 16881
 2009-07-17 15:57:09 +00:00
Florian Fainelli 349d57eee4 resync kernel configuration and enable kexec 
SVN-Revision: 16795
 2009-07-12 11:31:00 +00:00
Florian Fainelli 9d2522748f add bcm47xx lzma initramfs patch which is useful to workaround some CFE limitations when ramdisk kernels are too big 
SVN-Revision: 16709
 2009-07-06 11:28:34 +00:00
Florian Fainelli 9a387036d2 add a profile with no Wi-Fi drivers enabled, useful for bcm6338 
SVN-Revision: 16708
 2009-07-06 11:21:22 +00:00
Florian Fainelli fefeecf52f update to latest 2.6.27.26 stable kernel 
SVN-Revision: 16659
 2009-07-03 09:31:52 +00:00
Florian Fainelli 0bda624fc7 add the infrastructure to use a MPI/GPIO connected VoIP DSP 
SVN-Revision: 16650
 2009-07-01 21:00:41 +00:00
Florian Fainelli 8a8943671a fixes for the bcm6338 clocks, thanks Maxime 
SVN-Revision: 16640
 2009-07-01 13:49:20 +00:00
Florian Fainelli 5a7c5b2d36 a couple of more fixes to get 6345 booting up to the console handover 
SVN-Revision: 16636
 2009-06-30 13:45:49 +00:00
Florian Fainelli 8179904540 shared DMA zone is twice smaller on 6338 
SVN-Revision: 16608
 2009-06-28 20:06:44 +00:00
Florian Fainelli e6d307ab4b turn on size optimization for bcm63xx 
SVN-Revision: 16607
 2009-06-28 20:06:13 +00:00
Florian Fainelli 4096da301d off-by-one gpio numbers for bcm6338 
SVN-Revision: 16597
 2009-06-28 04:23:11 +00:00
Florian Fainelli 8813961e86 bcm6338 can support PCI since it has MPI 
SVN-Revision: 16592
 2009-06-27 21:43:55 +00:00
Florian Fainelli ca5de76ed3 more fixes for bcm6338, no need not to prevent reads from MPI registers now that we have it defined correctly 
SVN-Revision: 16589
 2009-06-27 20:32:43 +00:00
Florian Fainelli d02d75ba02 fix the flash address comment and register the flash device again with its proper physical address on 6338/6345 
SVN-Revision: 16587
 2009-06-27 18:58:00 +00:00
Florian Fainelli 0bb3a46217 fix a stupid typo preventing the board from being detected 
SVN-Revision: 16586
 2009-06-27 18:30:45 +00:00
Florian Fainelli bcc1dd7f99 prevent bcm6338 and bcm6345 from crashing very early 
SVN-Revision: 16585
 2009-06-27 18:23:58 +00:00
Florian Fainelli 7da8855c79 only register fallback sprom and enable PCI if we actually have support for PCI 
SVN-Revision: 16581
 2009-06-27 16:17:18 +00:00
Florian Fainelli bf0942ce5c do not bloat the kernel with experimental bcm6345 for now 
SVN-Revision: 16580
 2009-06-27 15:52:03 +00:00
Florian Fainelli 13a8ed9ca0 more missing register definitions for bcm6338 
SVN-Revision: 16579
 2009-06-27 15:51:27 +00:00
Florian Fainelli 287a2c0ba9 more bcm6338 and bcm6345 related fixes 
SVN-Revision: 16568
 2009-06-26 12:34:35 +00:00
Florian Fainelli 8c4137900c define bcm6338 SDRAM base register and make sure that the right CPU id will be used to detect a bcm6338 
SVN-Revision: 16567
 2009-06-26 11:08:12 +00:00
Florian Fainelli 45c25ff988 generate images for the bcm6338w 
SVN-Revision: 16566
 2009-06-26 10:27:37 +00:00
Florian Fainelli e86e91380a add board definitions for the bcm6338w 
SVN-Revision: 16565
 2009-06-26 10:27:13 +00:00
Florian Fainelli 1795111337 add imagetag support for BT Voyager 2500V, patch from Daniel Dickinson (#5364) 
SVN-Revision: 16506
 2009-06-18 15:00:32 +00:00
Florian Fainelli 606193fc1f generate experimental images for bcm6338 boards, thanks to Daniel Dickinson 
SVN-Revision: 16490
 2009-06-17 13:16:59 +00:00
Florian Fainelli a68fe5655e use 2.6.27.5 
SVN-Revision: 16486
 2009-06-17 08:46:47 +00:00
Imre Kaloz c83b031b84 use the same i/o schedulers for all targets 
SVN-Revision: 16479
 2009-06-15 20:43:02 +00:00
Florian Fainelli cc12508ee3 use build system REVISION variable (#5317) 
SVN-Revision: 16400
 2009-06-10 13:43:48 +00:00
Florian Fainelli ca16accfbb The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. 
Signed-Off By: Daniel Dickinson <crazycshore@gmail.com>

SVN-Revision: 16396
 2009-06-10 08:24:13 +00:00
Florian Fainelli e9c22f7939 cleanup the watchdog driver a bit 
SVN-Revision: 16395
 2009-06-09 21:35:51 +00:00
Florian Fainelli 972619416e fix the watchdog driver and enable it by default 
SVN-Revision: 16394
 2009-06-09 21:28:15 +00:00
Florian Fainelli 01118457e8 rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). 
SVN-Revision: 16393
 2009-06-09 08:04:52 +00:00
Florian Fainelli 4f72fef05e remove this line which got accidentaly succesfully applied, but should not have (#5285) 
SVN-Revision: 16380
 2009-06-08 13:42:11 +00:00
Florian Fainelli 8f84508c25 fix ethernet driver removal 
SVN-Revision: 16335
 2009-06-04 10:04:53 +00:00
Florian Fainelli 50936e1aa5 fix pcmcia device removal 
SVN-Revision: 16334
 2009-06-04 10:04:11 +00:00
Florian Fainelli 116a53a154 add missing null entry in pcmcia driver 
SVN-Revision: 16333
 2009-06-04 10:03:41 +00:00
Florian Fainelli 4049592268 request gpio pins and set direction correctly for pcmcia 
SVN-Revision: 16332
 2009-06-04 10:03:03 +00:00
Florian Fainelli 287a0efd68 be SMP safe even with gpiolib 
SVN-Revision: 16331
 2009-06-04 10:02:23 +00:00
Florian Fainelli 9013e936ed cache gpio values in gpio_set 
SVN-Revision: 16330
 2009-06-04 10:01:55 +00:00
Florian Fainelli 1208ffaedb use the correct number of GPIOs for bcm6358 
SVN-Revision: 16329
 2009-06-04 10:01:03 +00:00
Florian Fainelli c95420f06d register gpiochip earlier, allowing gpio-based runtime detection to be performed in board_init callback 
SVN-Revision: 16328
 2009-06-04 09:59:28 +00:00
Florian Fainelli d2b2ce325a merger mtu/802.1q related fixes: bcm63xx integrated ethernet mac supports receiving and sending frames bigger than 1500 bytes, this patch adds support for changing MTU. 
This patch also fixes the reception of 802.1q frames for default MTU
which were reported as oversized.

SVN-Revision: 16302
 2009-06-03 08:55:18 +00:00
Florian Fainelli 05b40c8d13 backport an upstream fix: We're not disabling IRQ, so we must call the irq safe flavour of netif_rx_complete, should fix some crashes when running the system for a long time 
SVN-Revision: 16277
 2009-06-01 18:27:51 +00:00
Florian Fainelli 9be0df0caa include wpa-supplicant iw in the default profile 
SVN-Revision: 16195
 2009-05-29 15:33:14 +00:00
Florian Fainelli 027d6ac4c5 also include the SPI driver in the gw6x00 profile 
SVN-Revision: 16077
 2009-05-26 11:15:27 +00:00
Florian Fainelli a94930dbbb include kmod-usb-storage and kmod-ipt-nathelper-extra for SIP connection tracking 
SVN-Revision: 16075
 2009-05-26 10:25:55 +00:00
Florian Fainelli fa45acd690 add the Tecom GW6x00 (6000 and 6200) board profile 
SVN-Revision: 16059
 2009-05-25 16:14:13 +00:00
Florian Fainelli f150bc5e36 update to new stable 2.6.27.24 
SVN-Revision: 15931
 2009-05-20 09:00:09 +00:00
Florian Fainelli 1322e2721a disable CONFIG_SSB_BLOCKIO by default until we fix it properly in mac80211 
SVN-Revision: 15926
 2009-05-19 18:15:19 +00:00
Imre Kaloz e965c02820 even more config file cleanup 
SVN-Revision: 15913
 2009-05-18 13:21:25 +00:00
Florian Fainelli ce87c61ae9 add missing SSB_BLOCKIO to prevent build failres, will resolve that globally later 
SVN-Revision: 15911
 2009-05-18 11:11:23 +00:00
Florian Fainelli 0d7f5f8d2c add support for sysupgrade (#5117) 
SVN-Revision: 15900
 2009-05-17 16:53:57 +00:00
Imre Kaloz 91e866f383 config cleanups 
SVN-Revision: 15861
 2009-05-15 10:40:04 +00:00
Imre Kaloz 26b42d5807 cardbus != pcmcia -- disable it in b43 
SVN-Revision: 15857
 2009-05-15 08:58:02 +00:00
Florian Fainelli 480b27e9f9 add missing configuration symbol 
SVN-Revision: 15856
 2009-05-15 07:04:32 +00:00
Imre Kaloz 6bfddb152f some additional config file cleanup.. 
SVN-Revision: 15845
 2009-05-14 13:32:34 +00:00
Imre Kaloz c83d91fcfc unify congestion control options 
SVN-Revision: 15844
 2009-05-14 12:42:07 +00:00
Imre Kaloz a9c958c2de make kernels use /etc/preinit by default 
SVN-Revision: 15840
 2009-05-14 10:20:53 +00:00
Florian Fainelli 01be18725f also supports pcmcia 
SVN-Revision: 15693
 2009-05-07 15:25:15 +00:00
Imre Kaloz e9b397805d some more kernel config cleanup.. last for today :) 
SVN-Revision: 15606
 2009-05-04 20:57:02 +00:00
Imre Kaloz 0f2b1d070a more cleanup 
SVN-Revision: 15605
 2009-05-04 20:31:47 +00:00
Imre Kaloz a614251e6c cleanup MTD option handling 
SVN-Revision: 15602
 2009-05-04 19:13:43 +00:00
Imre Kaloz 38c5311047 move MFD stuff to the generic kernel configs 
SVN-Revision: 15587
 2009-05-04 13:51:29 +00:00
Imre Kaloz 64fbade939 refresh patches 
SVN-Revision: 15581
 2009-05-04 11:35:08 +00:00
Imre Kaloz 86a4a6edb9 upgrade to newest stable kernel versions 
SVN-Revision: 15575
 2009-05-03 16:58:06 +00:00
Florian Fainelli a036aca55c now that we register gpiodev, also include gpioctl in the default image 
SVN-Revision: 15510
 2009-04-30 14:09:45 +00:00
Florian Fainelli 9485c3e834 register gpiodev 
SVN-Revision: 15509
 2009-04-30 14:09:01 +00:00
Florian Fainelli dd2b72105b fix redundant driver name printing in probe function 
SVN-Revision: 15254
 2009-04-19 13:32:54 +00:00
Florian Fainelli 1f334e3caa make images that can be flashed using the stock firmware web interface, thanks to Anselmo Luginbuhl and Daniel Dickinson (#4909, #4943) 
SVN-Revision: 15253
 2009-04-19 13:18:48 +00:00
Felix Fietkau 34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;) 
SVN-Revision: 15242
 2009-04-17 14:09:46 +00:00
Florian Fainelli 4bd65101ad do not override CONFIG_CONFIGFS_FS in a few places, and make gpiommc be selectable with the spio-gpio-old module (#4659) 
SVN-Revision: 15215
 2009-04-12 12:54:38 +00:00
Florian Fainelli 14832d3c23 some more fixes to the SPI controller driver 
SVN-Revision: 15146
 2009-04-08 08:52:57 +00:00
Florian Fainelli 5d5c8300b1 imagetag's -k argument is expected to be hexadecimal instead of decimal (#4885) 
SVN-Revision: 15133
 2009-04-07 13:22:32 +00:00
Florian Fainelli fb3fbea164 override CONFIG_USB_EHCI_ROOT_HUB_TT since it breaks ehci on bcm6358 
SVN-Revision: 15020
 2009-03-24 15:22:07 +00:00
Hauke Mehrtens f5dc2ce0aa refresh patches 
SVN-Revision: 15018
 2009-03-24 15:09:20 +00:00
Hauke Mehrtens e82dce69a3 update to kernel version 2.6.27.21 
SVN-Revision: 15016
 2009-03-24 15:05:51 +00:00
Florian Fainelli 501ebb4f74 enable all blocks on 6338 and uart clock on 6345 
SVN-Revision: 14957
 2009-03-21 10:50:44 +00:00
Florian Fainelli 0972ee5331 add support for bcm6345 SoC, needs testing 
SVN-Revision: 14953
 2009-03-20 15:08:02 +00:00
Florian Fainelli 32c29f1aaf fix SPI register switch and prepare for UDC, thanks to Henk Vergonet (#4783) 
SVN-Revision: 14914
 2009-03-17 11:28:54 +00:00
Florian Fainelli b865f9b722 add the CFE offset command line option to the imagetag utility, closes (#4366) 
SVN-Revision: 14896
 2009-03-16 12:29:11 +00:00
Florian Fainelli 6495fa36ea add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 
SVN-Revision: 14850
 2009-03-12 08:54:04 +00:00
Florian Fainelli 8065eb4a55 do not duplicate fifo_size, since RX and TX fifo sizes are the same, request_mem_region on the registers 
SVN-Revision: 14848
 2009-03-11 10:32:44 +00:00
Florian Fainelli 51125fb616 make SPI work in full-duplex mode by default 
SVN-Revision: 14841
 2009-03-10 15:28:29 +00:00
Florian Fainelli add058c382 include kmod-switch in the default images 
SVN-Revision: 14827
 2009-03-09 21:58:49 +00:00
Florian Fainelli 58a11bcb40 package the bcm63xx-spi driver 
SVN-Revision: 14794
 2009-03-08 19:21:55 +00:00
Florian Fainelli ae1ed9b7f4 add bcm63xx_spi based on reading shared/opensource/flash/spiflash.c from the consumer releases, needs testing 
SVN-Revision: 14793
 2009-03-08 15:27:46 +00:00
Florian Fainelli 871b0d6fed fix SPI accessors 
SVN-Revision: 14792
 2009-03-08 14:20:15 +00:00
Florian Fainelli 1bcf5d0de6 fix typo for the bcm6338 spi IRQ, change platform driver name and make the SPI irq be fetchable by platform driver initialization code 
SVN-Revision: 14790
 2009-03-08 12:43:13 +00:00
Florian Fainelli bf7f2939c2 compile and register SPI controller device 
SVN-Revision: 14789
 2009-03-08 12:18:26 +00:00
Florian Fainelli 1e92d0355d make bcm6358 consistend with the other boards naming 
SVN-Revision: 14788
 2009-03-08 12:17:19 +00:00
Florian Fainelli b1abddb45f fix some SPI register definitions and platform-device registration code 
SVN-Revision: 14787
 2009-03-08 12:13:52 +00:00
Florian Fainelli 5e8dfe53b6 prepare for SPI controller driver 
SVN-Revision: 14755
 2009-03-06 01:15:00 +00:00
Florian Fainelli 9422b140ba fix SPI register definitions 
SVN-Revision: 14754
 2009-03-06 01:13:10 +00:00
Florian Fainelli 2d1ed46c68 fix a bcm963xx-flash warning 
SVN-Revision: 14730
 2009-03-02 18:55:47 +00:00
Florian Fainelli 6f484fc283 provide a sane SPROMv2 to make on-board bcm4318 card work, thanks mb__ 
SVN-Revision: 14683
 2009-02-27 15:48:23 +00:00
Florian Fainelli b539d11497 move the device registration to an earlier initcall level, required for fallback SPROM to work 
SVN-Revision: 14681
 2009-02-27 15:18:34 +00:00
Felix Fietkau 11014b5cea disable all kernel config options that are set to =m 
SVN-Revision: 14611
 2009-02-22 04:44:24 +00:00
Hauke Mehrtens 3f085cd501 update to 2.6.28.7 and 2.6.27.19 
SVN-Revision: 14601
 2009-02-21 18:53:05 +00:00
Gabor Juhos 47665da430 update to 2.6.27.17 
SVN-Revision: 14513
 2009-02-15 07:47:12 +00:00
Florian Fainelli eda8310293 always select kmod-ssb, pci is supported 
SVN-Revision: 14492
 2009-02-13 00:13:39 +00:00
Florian Fainelli 99203ed0b1 do not overried 802.1q and PHY kernel configuration symbols 
SVN-Revision: 14468
 2009-02-10 17:53:52 +00:00
Gabor Juhos 7f04c52b92 update to 2.6.27.15 
SVN-Revision: 14440
 2009-02-08 12:32:39 +00:00
Florian Fainelli 1fc20f18d4 resync kernel configuration 
SVN-Revision: 14395
 2009-02-03 19:59:01 +00:00
Florian Fainelli 730346e2d5 add support for user9102 boards (#4537) 
SVN-Revision: 14305
 2009-01-31 16:01:20 +00:00
Florian Fainelli c2c0d74f67 generate images for old CFE based boards like the Davolink DV201 
SVN-Revision: 14264
 2009-01-29 14:56:45 +00:00
Florian Fainelli d7cb033a04 Add board definitions for the Davolink DV201AMR 
SVN-Revision: 14263
 2009-01-29 14:54:13 +00:00
Gabor Juhos 2a0825b4d3 update to 2.6.27.13 
SVN-Revision: 14179
 2009-01-25 18:33:19 +00:00
Gabor Juhos 0c2e187f54 switch to 2.6.27.12 
SVN-Revision: 14157
 2009-01-23 13:30:27 +00:00
Florian Fainelli 46b91ed787 frequency is in Hz, thanks Joel 
SVN-Revision: 14067
 2009-01-17 15:29:36 +00:00
Florian Fainelli 5ce93c07a5 fix SPI register definitions 
SVN-Revision: 14048
 2009-01-15 22:53:32 +00:00
Florian Fainelli 5905a48169 allow bcm6338 to get the base address of the memory controller register, required to detect memory size 
SVN-Revision: 14047
 2009-01-15 22:42:22 +00:00
Gabor Juhos 3ca7f3bd6f update to 2.6.27.11 
SVN-Revision: 14043
 2009-01-15 13:40:35 +00:00
Florian Fainelli 4c7d2cf90e correct SPI register size 
SVN-Revision: 13886
 2009-01-06 14:49:27 +00:00
Andy Boyett 9f8c82da09 Add hostapd-mini to default images where applicable 
SVN-Revision: 13819
 2009-01-02 05:12:46 +00:00
Gabor Juhos 8395d01b59 update to 2.6.27.10 
SVN-Revision: 13695
 2008-12-19 19:25:35 +00:00
Florian Fainelli 85d59fbf8c add board registration of the bcm96338gw 
SVN-Revision: 13693
 2008-12-19 17:24:29 +00:00
Florian Fainelli 3f7137022d 6338 has no PCI 
SVN-Revision: 13692
 2008-12-19 17:08:11 +00:00
Florian Fainelli 3dd67d64f4 add experimental support for bcm6338 
SVN-Revision: 13691
 2008-12-19 17:05:09 +00:00
Florian Fainelli fa5a568380 Register watchdog driver 
SVN-Revision: 13690
 2008-12-19 15:00:33 +00:00
Florian Fainelli 42ff43386a fix register definitions for bcm6358, thanks SGDA 
SVN-Revision: 13688
 2008-12-19 10:19:00 +00:00
Florian Fainelli 3ae3bf981e resync kernel configuration 
SVN-Revision: 13687
 2008-12-19 10:16:52 +00:00
Florian Fainelli 7ab973e1af Add bcm63xx_wdt but do not enable it yet 
SVN-Revision: 13677
 2008-12-17 14:06:03 +00:00
Gabor Juhos e7336673b1 update to 2.6.27.9 and refresh patches 
SVN-Revision: 13659
 2008-12-16 10:37:14 +00:00
Florian Fainelli 562ff99c2c Build images for Inventel Livebox 
SVN-Revision: 13616
 2008-12-12 15:16:57 +00:00
Florian Fainelli 34867901d0 Resync kernel config 
SVN-Revision: 13607
 2008-12-11 23:16:54 +00:00
Florian Fainelli 4025c12a2d Fix typo, we are not building for the DG834G (ar7) but the DG834GT (brcm6348) 
SVN-Revision: 13588
 2008-12-10 23:57:23 +00:00
Florian Fainelli 4dc65aed63 Add support for Sagem F@ST2404 (#4332) 
SVN-Revision: 13583
 2008-12-10 16:13:41 +00:00
Florian Fainelli 5dc3098a6c Disable CONFIG_NF_CT_ACCT 
SVN-Revision: 13577
 2008-12-10 01:39:29 +00:00
Florian Fainelli 6acf4c2a19 Fix remaining bug of the off-by-one error ;) 
SVN-Revision: 13551
 2008-12-08 21:00:00 +00:00
Florian Fainelli fadddcc655 Enable ohci on bcm96348gw 
SVN-Revision: 13549
 2008-12-08 16:25:41 +00:00
Florian Fainelli 47050e72be Prepare bcm63xx for SPI master support 
SVN-Revision: 13547
 2008-12-08 14:14:37 +00:00
Florian Fainelli f3be50a031 Add support for bcm96348gw10 (Netgear DG834GT) (#4319) 
SVN-Revision: 13540
 2008-12-07 20:34:48 +00:00
Gabor Juhos 4992a87aeb update to 2.6.27.8 and refresh patches 
SVN-Revision: 13528
 2008-12-06 09:59:55 +00:00
Gabor Juhos 919a8a9fe0 make mips_machine stuff available for other MIPS targets 
SVN-Revision: 13492
 2008-12-02 21:54:53 +00:00
Florian Fainelli 01a5c953a3 Fix an off-by one printing error 
SVN-Revision: 13469
 2008-12-02 14:11:54 +00:00
Florian Fainelli 043562037f resync kernel config 
SVN-Revision: 13433
 2008-11-29 16:33:07 +00:00
Florian Fainelli e8aad7938a Improve Inventel Livebox support 
SVN-Revision: 13427
 2008-11-29 12:57:41 +00:00
Florian Fainelli aa3c775b65 Reorder profiles numbering, broadcom being the most widely used 
SVN-Revision: 13401
 2008-11-28 16:35:10 +00:00
Florian Fainelli cc2e43992d bcm63xx MTD driver cleanup and fixes: - convert to platform_driver - get the window_size/addr from the board setup code - indentation fixes - remove duplicate code - move bcm_tag declaration out of the MTD driver 
SVN-Revision: 13379
 2008-11-27 20:40:03 +00:00
Florian Fainelli bbad86e098 Add missing config symbol for SSB 
SVN-Revision: 13378
 2008-11-27 20:38:01 +00:00
Florian Fainelli 44108d6a2d Commit changes on the files for gpiolib 
SVN-Revision: 13374
 2008-11-27 10:38:36 +00:00
Florian Fainelli 36fc2d1f93 Convert brcm63xx to gpiolib 
SVN-Revision: 13373
 2008-11-27 10:38:01 +00:00
Florian Fainelli 1c77ec0587 Flatten brcm63xx patches, should make our life easier to patch files now ;) 
SVN-Revision: 13368
 2008-11-26 18:41:01 +00:00
Florian Fainelli 4fc7535fc7 Make 4-port LAN and 1 port wan configurations work 
SVN-Revision: 13362
 2008-11-26 15:51:55 +00:00
Imre Kaloz 752054346a update to 2.6.27.7 
SVN-Revision: 13347
 2008-11-25 13:54:46 +00:00
Imre Kaloz a695fa76a4 move THERMAL symbols into the generic config 
SVN-Revision: 13346
 2008-11-25 13:52:25 +00:00
Florian Fainelli 0f26e35e37 brcm63xx has pcmcia support and is able to run b43 on its pci bus 
SVN-Revision: 13303
 2008-11-20 23:08:20 +00:00
Florian Fainelli 5acddecc68 Update brcm63xx broadcom profile now that b43 is available 
SVN-Revision: 13302
 2008-11-20 23:01:48 +00:00
Florian Fainelli 8f5351a4f2 Synchroniz bcm63xx kernel configuration 
SVN-Revision: 13300
 2008-11-20 22:16:48 +00:00
Florian Fainelli e854a26332 Prevent the MTD map to fail, somehow detect_cfe will read the tag plus some garbage, therefore making a simple strcmp will fail 
SVN-Revision: 13299
 2008-11-20 21:26:11 +00:00
Florian Fainelli 107aa04e06 Generate valid images for the bcm96348gw board 
SVN-Revision: 13298
 2008-11-20 21:22:45 +00:00
Imre Kaloz 722c78cd1e move some options to the generic 2.6.27 config 
SVN-Revision: 13264
 2008-11-17 17:28:12 +00:00
Imre Kaloz 7d09c0b086 update to 2.6.27.6 
SVN-Revision: 13261
 2008-11-17 17:22:30 +00:00
Florian Fainelli 0d4286b0b3 This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. (#4201) 
SVN-Revision: 13213
 2008-11-15 11:30:22 +00:00
Florian Fainelli cb126cd576 Package bcm63xx-pcmcia kernel module and fix compilation 
SVN-Revision: 13212
 2008-11-15 11:26:23 +00:00
Florian Fainelli 9bbc37d26b Remove old kernel configuration files 
SVN-Revision: 13211
 2008-11-15 11:23:29 +00:00
Florian Fainelli 517e3d404c Delete old brcm63xx files 
SVN-Revision: 13210
 2008-11-15 11:21:42 +00:00
Gabor Juhos 88cda758c3 update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patch by Hauke Mehrtens * closes #4193 
SVN-Revision: 13192
 2008-11-12 17:49:01 +00:00
Nicolas Thill 0a11abc83d add missing kconfig symbols for 2.6.27 targets when all modules are enabled 
SVN-Revision: 13178
 2008-11-11 02:43:35 +00:00
Felix Fietkau d0388bbe5c brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition 
SVN-Revision: 13130
 2008-11-06 12:52:39 +00:00
Florian Fainelli 7cedaafd0c Add basic support for Inventel Liveboxes, resync kernel config 
SVN-Revision: 13108
 2008-11-03 20:30:43 +00:00
Florian Fainelli 9aa1d64b91 Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken 
SVN-Revision: 13106
 2008-11-03 18:52:58 +00:00
Florian Fainelli aa90a702db Use 2.6.27.4 kernel version 
SVN-Revision: 13055
 2008-10-28 11:19:24 +00:00
Florian Fainelli 30d2200e7d Update targets to 2.6.27.3 
SVN-Revision: 13035
 2008-10-23 09:11:10 +00:00
Florian Fainelli 28baca91fe Update patches and rename board 9 stands for development board 
SVN-Revision: 13024
 2008-10-22 09:20:51 +00:00
Florian Fainelli 691e187381 Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices 
SVN-Revision: 13015
 2008-10-20 12:55:28 +00:00
Florian Fainelli 64c28032c8 New Broadcom BCM63xx codebase, huge thanks to Maxime ;) 
SVN-Revision: 13001
 2008-10-17 22:53:56 +00:00
Florian Fainelli 5718709711 Fix reference to the old and replaced kmod-rt61 
SVN-Revision: 12723
 2008-09-27 10:47:00 +00:00
Gabor Juhos 821170133f update to 2.6.26.5 and 2.6.25.17 
SVN-Revision: 12718
 2008-09-26 18:46:53 +00:00
Nicolas Thill 3029c2fd53 disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported 
SVN-Revision: 12690
 2008-09-24 19:28:53 +00:00
Gabor Juhos 184c6b06f2 update to 2.6.26.3 and 2.6.25.16 
SVN-Revision: 12371
 2008-08-22 15:37:19 +00:00
Gabor Juhos e5fa05d788 update to 2.6.25.15 and 2.6.26.2 
SVN-Revision: 12242
 2008-08-07 16:52:52 +00:00
Gabor Juhos 104b3386a2 update to 2.6.25.12 
SVN-Revision: 11933
 2008-07-26 10:53:23 +00:00
Imre Kaloz 492ba57b56 update targets to 2.6.25.10 
SVN-Revision: 11667
 2008-07-05 16:52:15 +00:00
Imre Kaloz dee39d10ee upgrade to 2.6.25.9 
SVN-Revision: 11584
 2008-06-26 14:28:16 +00:00
Gabor Juhos 4af6ac74fb upgrade to 2.6.25.7, and refresh patches 
SVN-Revision: 11523
 2008-06-17 12:57:04 +00:00
Imre Kaloz 2eb6751084 upgrade to 2.6.25.6 
SVN-Revision: 11435
 2008-06-11 11:38:39 +00:00
Florian Fainelli 6e0427c8a4 Add bcm3350 cpuid 
SVN-Revision: 11364
 2008-06-05 16:19:46 +00:00
Gabor Juhos c2619fb5ab revert kernel version to 2.6.25.4 
SVN-Revision: 11273
 2008-05-27 06:27:16 +00:00
Gabor Juhos ac897ce5b1 refresh kernel patches 
SVN-Revision: 11201
 2008-05-19 08:33:22 +00:00
Gabor Juhos f9719b35c8 upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19) 
SVN-Revision: 11184
 2008-05-18 20:12:54 +00:00
Felix Fietkau 12da51bb3c bcm96345: correct some 6345 specific stuff 
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11183
 2008-05-18 17:32:16 +00:00
Felix Fietkau ab2b78aabd bcm963xx: fix cfe detection 
The CFE detection failed to account for zero termination.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11182
 2008-05-18 17:32:05 +00:00
Felix Fietkau be49888f6c bcm963xx: add new timer code 
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11181
 2008-05-18 17:31:55 +00:00
Felix Fietkau f92e4aaf53 bcm963xx: remove obsolete timer code 
This removes some code that has been deprecated in kernels >= 2.6.24.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11180
 2008-05-18 17:31:45 +00:00
Felix Fietkau 4db60563fc bcm963xx: fix uart isr 
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11179
 2008-05-18 17:31:35 +00:00
Felix Fietkau ca851edf10 bcm963xx: rewrite irq handling code 
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11178
 2008-05-18 17:31:25 +00:00
Felix Fietkau 289c41604f bcm963xx: add missing trailing zero to load address 
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11177
 2008-05-18 17:31:11 +00:00
Felix Fietkau 17d20bb016 bcm963xx: flashmap support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11176
 2008-05-18 17:31:02 +00:00
Felix Fietkau da18b98cff bcm963xx: serial port support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11175
 2008-05-18 17:30:49 +00:00
Felix Fietkau 97b85443eb bcm963xx: board support 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11174
 2008-05-18 17:30:39 +00:00
Felix Fietkau f94d5eafc9 bcm963xx: add 2.6.25 configuration file 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11173
 2008-05-18 17:30:30 +00:00
Felix Fietkau 8e7ff7a673 bcm963xx: use the 2.6.25.1 kernel 
Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11172
 2008-05-18 17:30:16 +00:00
Felix Fietkau 2dfabe3991 bcm963xx: image generation using image tagger 
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11171
 2008-05-18 17:30:04 +00:00
Felix Fietkau 46b4413fbb bcm963xx: fix load address / kernel entry 
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.

Signed-off-by: Axel Gembe <ago@bastart.eu.org>

SVN-Revision: 11169
 2008-05-18 17:29:39 +00:00
Nicolas Thill e3a42b23c6 enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate 
SVN-Revision: 11097
 2008-05-09 17:08:51 +00:00
Imre Kaloz 68943e35c2 upgrade to 2.6.24.5 
SVN-Revision: 10959
 2008-04-28 10:23:36 +00:00
Nicolas Thill c6fe45ed55 properly disable CONFIG_CRYPTO_HW 
SVN-Revision: 10952
 2008-04-27 12:31:50 +00:00
Florian Fainelli 03f917f26c Delete config-default file and resync kernel configuration for brcm63xx 
SVN-Revision: 10790
 2008-04-11 14:22:41 +00:00
Florian Fainelli 62240465c4 brcm63xx image generation cleanups (#3169) 
SVN-Revision: 10703
 2008-04-01 21:10:47 +00:00