Commit Graph

24075 Commits (7d3fca89c029b62b869e45cdd30c5556ebefe9f6)

Author SHA1 Message Date
Gabor Juhos d543f4b771 ramips: add user-space support for the Upvel UR-326N4G board
[juhosg: fix mac address setup]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35971
2013-03-11 21:02:43 +00:00
Gabor Juhos 3c2ef04a0e ramips: add kernel support for the Upvel UR-326N4G board
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35970
2013-03-11 21:02:40 +00:00
Jo-Philipp Wich 8c7ed1cb7b firewall3: update to git head
* Fixes compilation against eglibc
 * Fixes tracking logic when selectively restarting IPv4 or IPv6 firewall
 * Fixes tracking logic for user chains by differentiating between reloads and restarts
 * Introduces per-zone user chains {input,output,forwarding,prerouting,postrouting}_$zone_rule
 * Supports legacy "tcpudp" protocol notation again

SVN-Revision: 35969
2013-03-11 20:52:20 +00:00
Gabor Juhos 14ca5fc98b ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35966
2013-03-11 19:52:54 +00:00
Gabor Juhos 72fc0c1906 ar71xx: add AR934X_GPIO_FUNC_* defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35965
2013-03-11 19:52:51 +00:00
Gabor Juhos 44cc1507e9 ar71xx: makefile changes to build image for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35964
2013-03-11 15:55:25 +00:00
Gabor Juhos 55e2ae7452 firmware-utils/mktplinkfw: Add support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35963
2013-03-11 15:55:23 +00:00
Gabor Juhos 2998abab7c ar71xx: add user-space support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35962
2013-03-11 15:55:22 +00:00
Gabor Juhos 902dd27383 ar71xx: add kernel support for MR3420v2
[juhosg: use gpio_request_one to enable the USB power]

Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>

SVN-Revision: 35961
2013-03-11 15:55:20 +00:00
Gabor Juhos 5c5e1c0a9d ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.

Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35960
2013-03-11 15:55:19 +00:00
Gabor Juhos 257bfc21af ar71xx: add profile support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35959
2013-03-11 15:55:17 +00:00
Gabor Juhos 3fa3cbae7c ar71xx: add user space support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35958
2013-03-11 15:55:15 +00:00
Gabor Juhos a7525f5f5d ar71xx: add kernel support for dir-835-a1
[juhosg:
  - remove custom mdio bus info and platform data for ar8327, clear the
    .led_cfg field from dir835a1_setup instead,
  - remove arguments of dir835c1_generic_setup function, register the
    LEDs directly from the board specific setup instead]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35957
2013-03-11 15:55:13 +00:00
Felix Fietkau bd6c9d6252 cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
SVN-Revision: 35953
2013-03-11 02:29:53 +00:00
Felix Fietkau d7a529709a cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
SVN-Revision: 35952
2013-03-11 02:29:47 +00:00
Felix Fietkau 0d13baff1e cns3xxx: increase number of ethernet driver rx buffers
SVN-Revision: 35951
2013-03-10 21:59:32 +00:00
Felix Fietkau ee2b511e1f cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
SVN-Revision: 35950
2013-03-10 21:59:28 +00:00
Felix Fietkau d22ac8d8fb cns3xxx: minor ethernet driver cleanup
SVN-Revision: 35949
2013-03-10 21:59:21 +00:00
Hauke Mehrtens e1f24d99e1 brcm47xx: refresh config
SVN-Revision: 35948
2013-03-10 20:42:26 +00:00
Hauke Mehrtens 89d4fceee2 xburst: fix compilation: remove the __dev attributes
SVN-Revision: 35946
2013-03-10 20:26:28 +00:00
Hauke Mehrtens 45b24fa771 kernel: add some missing config options found by the buildbot.
SVN-Revision: 35945
2013-03-10 20:25:19 +00:00
Hauke Mehrtens 281e12abae mac80211: b43: increase number of rx slots to 256 again.
SVN-Revision: 35944
2013-03-10 20:24:15 +00:00
Felix Fietkau 9facda9570 cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
SVN-Revision: 35943
2013-03-10 18:25:20 +00:00
Felix Fietkau c44506fcbd cns3xxx: fix an rx irq handling corner case
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.

SVN-Revision: 35942
2013-03-10 18:25:16 +00:00
Felix Fietkau c1adc79328 cns3xxx: fix ethernet driver memory barrier usage
SVN-Revision: 35941
2013-03-10 18:25:11 +00:00
Gabor Juhos 9a71711d39 realview: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35940
2013-03-10 18:06:31 +00:00
Gabor Juhos 35dd42f976 realview: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35939
2013-03-10 18:06:29 +00:00
Felix Fietkau 53e0f10246 kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
SVN-Revision: 35938
2013-03-10 17:04:36 +00:00
Felix Fietkau 2b83c9bd8a kernel: ensure that the arm exception handlers get preserved
SVN-Revision: 35937
2013-03-10 17:04:31 +00:00
Felix Fietkau f0d7ba33ef kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
SVN-Revision: 35936
2013-03-10 14:51:42 +00:00
Felix Fietkau a1c2e78817 kernel: remove the BROKEN dependency on the kernel export symbol strip
SVN-Revision: 35935
2013-03-10 14:51:38 +00:00
Gabor Juhos 5b3ab0e21e xburst: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35934
2013-03-10 13:24:54 +00:00
Gabor Juhos 00caedf86e xburst: switch to 3.8
Compile tested only, so add broken flag.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35933
2013-03-10 13:24:52 +00:00
Gabor Juhos 8942d4dc04 xburst: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35932
2013-03-10 13:24:50 +00:00
Gabor Juhos 15718f5387 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35931
2013-03-10 13:24:47 +00:00
Gabor Juhos f25c050aa9 adm5120: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35930
2013-03-10 13:24:46 +00:00
Gabor Juhos 5502bbe2ca adm5120: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35929
2013-03-10 13:24:45 +00:00
Gabor Juhos c42da71d8b malta: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35928
2013-03-10 13:24:44 +00:00
Gabor Juhos 6720fc6952 malta: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35927
2013-03-10 13:24:43 +00:00
Gabor Juhos 82dc64b19b atheros: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35926
2013-03-10 13:24:42 +00:00
Gabor Juhos 5b8e106ae6 atheros: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35925
2013-03-10 13:24:40 +00:00
Gabor Juhos ce5806378e mpc83xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35924
2013-03-10 13:24:39 +00:00
Gabor Juhos c79c132229 mpc83xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35923
2013-03-10 13:24:38 +00:00
Gabor Juhos 27ba973c06 rb532: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35922
2013-03-10 13:21:40 +00:00
Gabor Juhos 501e4d331d rb532: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35921
2013-03-10 13:21:33 +00:00
Gabor Juhos 8223205a29 rb532: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35920
2013-03-10 13:21:29 +00:00
Gabor Juhos e8a5312bef ar71xx: correct board name to make LEDs work on RB750
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35919
2013-03-10 07:20:57 +00:00
Gabor Juhos d85ffaabe9 ppc40x: remove __dev_{in,ex}it annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35918
2013-03-10 07:20:54 +00:00
Felix Fietkau 446409f43e cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
SVN-Revision: 35917
2013-03-10 01:27:04 +00:00
Felix Fietkau 95431b7843 cns3xxx: remove linux 3.3 support
SVN-Revision: 35916
2013-03-10 01:01:55 +00:00