Commit Graph

842 Commits (79741dc379178977a68672f8180f7d07796aae07)

Author SHA1 Message Date
Rafał Miłecki f20ba0f0d5 brcm47xx: image: use append-rootfs step for per-device rootfs support
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 17:03:55 +02:00
Rafał Miłecki 027b2c5b83 brcm47xx: image: make TRX steps work with rootfs passed as $@
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 16:46:57 +02:00
Rafał Miłecki 8bd2167236 brcm47xx: image: make linksys-pattern-partition leave specific file
Thanks to leaving .pattern file we can easily insert extra step between
linksys-pattern-partition and trx-v2-with-loader, e.g. rootfs one.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-28 16:41:05 +02:00
Rafał Miłecki bc6be3e953 brcm47xx: add support for per-device rootfs
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-27 13:25:51 +02:00
Rafał Miłecki 13e6f7a75d brcm47xx: reorder older entries in image Makefile
Keep all entries sorted and replace tabs with spaces while at it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 20:35:24 +02:00
Rafał Miłecki 06405df7a8 brcm47xx: bump kernel to 4.4
Kernel 4.4 was ready for brcm47xx for almost a year now but I kept
postponing the bump due to problems with Linksys WRT300N v1.0. OpenWrt
and LEDE with 4.4 were hanging at the booting with the:
> Starting program at 0x80001000
(the last CFE message).

This was a permanent state, "make distclean" wasn't helping, I spent
hours debugging this and I was reliably reproducing the issue every
time. I also reported it on linux-mips ML in the thread:
> BCM4704 stopped booting with 4.4 (due to vmlinux size?)

After ~month I started working on WRT300N again. I got hangs as expected
every time I switched from 4.1 to 4.4. I started experimenting with:
1) TRX content (I tried dropping rootfs partition)
2) BZ_TEXT_START of lzma-loader
3) Flashing other variants of image: lzma compressed kernel (without a
   loader), gzip compressed one, uncompressed one.

At some point I got rootfs-less image booting and after that I couldn't
reproduce problem anymore, even with a complete firmware. It seems like
hardware was in some locked/unstable state that got magically fixed.

I have LEDE working now, tested it even with "make distclean", it seems
we can bump kernel now. I'll keep testing it on WRT300N for some time.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 17:22:23 +02:00
Rafał Miłecki 6e64a38b00 brcm47xx: build also TRX image for Linksys WRT300N V1
Linksys WRT300N V1 has pretty bugged CFE bootloader (it crashes in a lot
of situations) that doesn't accept .bin image.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 10:34:59 +02:00
Rafał Miłecki 337f219130 brcm47xx: open code Makefile entries for all devices
If we want to use some of new features like per device rootfs we will
need this to specify them there.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-24 10:33:33 +02:00
Jo-Philipp Wich 1c09849f6c treewide: remove bad local shell variable declarations
Local variable declarations outside of functions are illegal since the Busybox
update to v1.25.0, therfore remove them from the appropriate places.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-09-24 14:38:20 +02:00
Felix Fietkau aa53f78038 build: fix subtarget descriptions
Move Target/Description above the target.mk include

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-04 13:35:11 +02:00
Stijn Tintel 8072264b96 kernel: update kernel 4.4 to version 4.4.19
Refresh patches for all targets that support kernel 4.4.
Compile-tested on all targets that use kernel 4.4 and aren't marked broken.
Runtime-tested on ar71xx, octeon and x86/64.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2016-08-23 10:51:17 +03:00
Stijn Tintel 861f566e34 brcm47xx: add missing config symbol 2016-08-23 10:29:14 +03:00
Felix Fietkau 9abbaa9539 build: remove MIPS dsp/dsp2 CPU_SUBTYPE
There does not seem to be any meaningful difference in generated code.
This will save some time and space on snapshot builds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-03 14:56:45 +02:00
Felix Fietkau 63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Hauke Mehrtens efa1960abb kernel: update kernel 4.4 to version 4.4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-13 15:39:15 +02:00
Hauke Mehrtens 84d489f64f kernel: update to version 4.4.14
Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14

Some manual changes to target/linux/generic/patches-4.4/610-
netfilter_match_bypass_default_checks.patch were needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-26 18:20:37 +02:00
Rafał Miłecki cf6d9d97fb kernel: rename B53 symbols to avoid upstream kernel conflict
In kernel 4.7 there is upstreamed b53 driver using (mostly?) the same
symbols as our b53 does. Change our symbols so both drivers can coexist
in kernel tree.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
2016-06-20 08:00:14 +02:00
John Crispin 9b4f17593a brcm47xx: add the small_Flash feature
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:44 +02:00
Felix Fietkau 7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Felix Fietkau 98010ab489 kernel: remove ocf support, cryptodev-linux should be used instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 19:35:32 +02:00
Felix Fietkau 05459a004a kernel: move the old gpio watchdog driver from generic to brcm47xx
brcm47xx is the only user

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 18:10:09 +02:00
Russell Senior c3cf3c4ec4 brcm47xx: fix wgt634u port assignment, broken since openwrt r47866
Signed-off-by: Russell Senior <russell@personaltelco.net>
2016-05-10 10:43:17 +02:00
Hauke Mehrtens f0b3964f1b kernel: update kernel 4.4 to version 4.4.7
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49176
2016-04-16 21:05:48 +00:00
Gabor Juhos 395fff6f8b brcm47xx: lzma-loader: fix cache invalidation
The current code only partially invalidates both caches
because the cache size and cache-line size values are
incorrectly passed to the C code.

Fix the assembly code to pass the arguments in the correct
order.

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49060
2016-03-21 13:15:22 +00:00
Gabor Juhos f8933cbd5f brcm47xx: lzma-loader: remove trailing whitespaces from head.S
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49059
2016-03-21 13:15:21 +00:00
Hauke Mehrtens b3aae4c672 kernel: update kernel 4.4 to version 4.4.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49032
2016-03-17 21:41:07 +00:00
Rafał Miłecki 210803df03 brcm47xx: image: create standard TRX images using new building system
Apart from using our new building system there are 2 more changes:

1) Limit amount of images
So far we were generating all standard images (optimized one and two
with no loader) for every SUBTARGET. This is not needed, as e.g. the
only device requiring gzipped kernel is legacy Huawei E970.

2) Change output names
The new image building system requires specifying device name. This
forced picking some and resulted in:
openwrt-brcm47xx-$(SUBTARGET)-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-gz.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-noloader-nodictionary.trx
becoming:
openwrt-brcm47xx-$(SUBTARGET)-standard-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-gz-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-nodictionarylzma-squashfs.trx

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49006
2016-03-11 21:31:34 +00:00
Rafał Miłecki 4e6e23582b brcm47xx: image: move disabled devices to the new building system
This only drops WGR614 V9 which has 2 MiB flash and it's unlikely to get
any interest.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48975
2016-03-09 06:34:29 +00:00
Rafał Miłecki 9a6ad203f6 brcm47xx: image: switch Linksys WRT54G3GV2-VF to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48974
2016-03-09 06:34:25 +00:00
Rafał Miłecki ee76a07fbf brcm47xx: image: switch Netgear WGT634U to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48973
2016-03-08 18:33:25 +00:00
Rafał Miłecki 0d3da888d2 brcm47xx: image: switch rest of 64k block devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48972
2016-03-08 18:33:22 +00:00
Rafał Miłecki 5e2930a888 brcm47xx: image: switch Motorola devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48971
2016-03-08 18:33:19 +00:00
Rafał Miłecki 6eb0df3543 brcm47xx: image: switch D-Link DWL-3150 to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48970
2016-03-08 18:33:16 +00:00
Hauke Mehrtens cb04b8d582 kernel: update kernel 4.4 to version 4.4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
2016-02-25 21:54:39 +00:00
Jo-Philipp Wich 54de773f2b brcm47xx: add proper switch port mapping for WRT610Nv2 / Linksys E3000v1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48511
2016-01-27 20:47:44 +00:00
Hauke Mehrtens 4807ca67d6 kernel: update kernel 4.1 to version 4.1.16
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48497
2016-01-25 21:44:12 +00:00
Felix Fietkau 57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Hauke Mehrtens 93b50ade93 kernel/4.1: update to version 4.1.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48223
2016-01-12 20:51:34 +00:00
Hauke Mehrtens ba3a749f9b kernel: refresh patches for kernel 4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48222
2016-01-12 20:50:41 +00:00
Rafał Miłecki 0e8ba8ffcd brcm47xx: fix switch config for devices with WAN port 0
Commit r47866 dropped default values which were handling WAN interface
at port 0. Fix it by handling 2 more cases on NVRAM values.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47932
2015-12-18 15:27:16 +00:00
Rafał Miłecki 659ffc29c3 brcm47xx: update kernel 4.4 config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47931
2015-12-18 08:35:36 +00:00
Rafał Miłecki 7caa9411e7 brcm47xx: add kernel 4.4 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47930
2015-12-18 07:25:13 +00:00
Jo-Philipp Wich 67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich b0b8293b7e brcm47xx: migrate network config to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47866
2015-12-11 15:19:43 +00:00
Rafał Miłecki a8ac384746 brcm47xx: make bcm47xxpart patch apply after recent backports
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47806
2015-12-07 18:38:20 +00:00
Hauke Mehrtens f0a5f24217 kernel: update 4.1 to 4.1.13
- two upstreamed patches removed
- compile tested all targets using 4.1
- run tested ar71xx

Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47694
2015-12-02 21:52:41 +00:00
Rafał Miłecki db7f2d9531 brcm47xx: add Netgear WN2500RP support
We generate V1 image only for now. We lack buttons support for V2.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47682
2015-12-02 09:24:52 +00:00
Rafał Miłecki ce7bf20101 kernel: add CONFIG_SSB_HOST_SOC symbol
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47486
2015-11-16 12:22:47 +00:00
Rafał Miłecki f8692a4b88 brcm47xx: backport BCM47xx MIPS commits from 4.3 and 4.4-rc1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 47484
2015-11-16 07:18:37 +00:00
Hauke Mehrtens cb0c8da7c2 kernel: take bcm47xx_nvram.h from kernel and not backports
compat-wireless/backports now contains a bcm47xx_nvram.h file to
backport some of the functions in it which are used by the bcmfmac
driver. This file just checks for the kernel versions and provide an
empty implementations on older kernel versions. This is OK on most
systems, but on bcm47xx / bcm53xx systems we want to call the real
functions here. This commit removes the file from backports in our
build process like we do it with the bcma and ssb header files. Instead
we add a recent version into our kernel so all code uses only one
header file. On bcm47xx / bcm53xx the real implementations of this code
will be used.

Reported-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47467
2015-11-13 23:51:31 +00:00