0c21e6a7b8
madwifi: modify madwifi.sh to support IBSS WPA-NONE
...
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 31082
2012-03-27 13:21:39 +00:00
d8ac2c7c3f
wpa_supplicant: use wext driver for hostap and madwifi
...
SVN-Revision: 31081
2012-03-27 10:44:26 +00:00
ee875810eb
madwifi: change wireless ifname numbering schema Instead of simply counting up until we hit a free iface, group ifnames by wiphy so that the first wlanX on a phy gets the phy number and following ifaces an index-suffix, e.g. ath0 for network 1 on phy 1 and ath0-1 for network 2 on phy 1. This fixes state var confusion when operating multiple radios and allows to reliably take down and restart one radio only, even if the number of networks changes in between. This should, along with other changes in LuCI, fix #10335 .
...
SVN-Revision: 28785
2011-11-06 19:57:07 +00:00
89e74f6aea
madwifi: introduce "disabled" option for wifi-iface section to shutdown single networks on a radio
...
SVN-Revision: 28199
2011-09-08 23:31:42 +00:00
98da9c9066
madwifi: typo(s) in /lib/wifi/madwifi.sh
...
Hi
minrate and maxrate are acually not boolean, so, for example
"config minrate 11000" in /etc/config/wireless has no effect.
Signed-off by: Jan Hetges <tran@ms20.net>
SVN-Revision: 26504
2011-04-06 20:50:14 +00:00
3549fb214f
madwifi: Always escape SSID parameter
...
SVN-Revision: 26484
2011-04-05 15:09:38 +00:00
2c875b2edc
madwifi: add support for translating country codes into internal country code numbers (based on a patch by Manuel Munz)
...
SVN-Revision: 26306
2011-03-26 16:56:39 +00:00
f06c25a0bb
madwifi: Add newline at end of autodetected wireless config (cosmetic)
...
SVN-Revision: 26197
2011-03-17 07:07:03 +00:00
96bb1c7585
madwifi: Fix unique device autodetection
...
SVN-Revision: 26164
2011-03-15 00:43:50 +00:00
fa6e1dd37d
madwifi: Add support for multiple interfaces
...
SVN-Revision: 25951
2011-03-08 12:54:13 +00:00
87d81bc050
madwifi: fix syntax error introduced by r23660
...
SVN-Revision: 23679
2010-10-27 17:46:31 +00:00
c0bda9a6a9
madwifi: make wep-open the default
...
SVN-Revision: 23660
2010-10-27 11:46:01 +00:00
1b495361a0
madwifi: add wep+open, wep+shared format support to madwifi as well
...
SVN-Revision: 23657
2010-10-27 11:25:59 +00:00
f434771b7a
madwifi: disable softled by default on pci devices ( fixes #4484 )
...
SVN-Revision: 20195
2010-03-14 12:25:23 +00:00
da80071315
madwifi: fix antenna selection for ubnt loco2/loco5
...
SVN-Revision: 18853
2009-12-19 22:19:19 +00:00
f970dff78d
madwifi: add antenna gpio support for nanostation loco2
...
SVN-Revision: 18055
2009-10-17 22:11:14 +00:00
8691bbb699
madwifi: add a configuration for uapsd (unscheduled automatic powersave delivery), turn it off by default because of compatibility issues with nokia phones
...
SVN-Revision: 17510
2009-09-03 19:31:48 +00:00
3d2040de0f
madwifi: turn software based tsf merging on by default, get rid of some iwpriv errors on wifi restart
...
SVN-Revision: 16862
2009-07-16 11:30:01 +00:00
a4ed68fbe4
madwifi.sh channel fix
...
In the madwifi.sh there is to read "only need to change freq band and channel on the first vif". This is wrong. For example if you create a new Ad-Hoc network and an AP interface, the channel is reseted to 1, regardless of the UCI setting. So remove this wrong code.
Signed-off-by: Alina Friedrichsen <x-alina@gmx.net>
SVN-Revision: 16814
2009-07-12 15:37:59 +00:00
985b62a228
madwifi: disable compression by default, as it can cause instabilities on various platforms (thx, acoul)
...
SVN-Revision: 16421
2009-06-11 12:40:07 +00:00
121368fbc8
madwifi: clear variables used in for loop
...
SVN-Revision: 16308
2009-06-03 13:53:10 +00:00
037f0c9629
madwifi: remove cruft from madwifi.sh introduced by r15954, thanks Vasilis Tsiligiannis
...
SVN-Revision: 16238
2009-05-31 20:42:04 +00:00
443fc5fe1b
madwifi: remove the "turbo" iwpriv command, it does not do anything useful, but it can lead to crashes
...
SVN-Revision: 15992
2009-05-22 17:44:07 +00:00
89127a67f2
Declare some missing local variables in madwifi.sh Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
...
SVN-Revision: 15954
2009-05-20 21:52:15 +00:00
bd50b95bde
Detect every atheros device present This patch is for boards with more than one atheros devices. It changes detect_atheros() function to continue with the detection of every device present and don't return when just one is found Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
...
SVN-Revision: 15940
2009-05-20 20:44:19 +00:00
b6bb23e3a8
madwifi: don't try to set an interface essid with an empty value
...
SVN-Revision: 15886
2009-05-17 02:01:03 +00:00
251a657eaf
madwifi: fix distance setting
...
SVN-Revision: 15824
2009-05-13 13:02:20 +00:00
5bc30de4e7
madwifi: clean up handling of various timings such as slot time, ack timeout, eifs time, etc.
...
SVN-Revision: 15713
2009-05-08 19:25:31 +00:00
4cdb76c219
use config_get_bool for outdoor mode
...
SVN-Revision: 15634
2009-05-06 12:12:29 +00:00
56ae52b008
madwifi: make country code and outdoor flag changeable without reloading the driver
...
SVN-Revision: 15633
2009-05-06 11:52:24 +00:00
87c7791bf2
allow connection to a prefered bssid ( #4252 )
...
SVN-Revision: 15283
2009-04-19 21:09:02 +00:00
5f09427160
madwifi: only set the desired mode for the first vap
...
SVN-Revision: 15059
2009-03-29 00:10:31 +00:00
4aab5d7c49
madwifi: add config option for adjusting the beacon power relative to the full tx power (needs testing, units/scale still unknown, defaults to max.)
...
SVN-Revision: 15054
2009-03-26 23:04:23 +00:00
f19d25ebb3
madwifi: mode txpower to wifi-device section, but remain backwards compatible
...
SVN-Revision: 14307
2009-01-31 16:08:57 +00:00
4337de4977
Allow changing country code for madwifi driver. Thanks alisonken1
...
SVN-Revision: 14148
2009-01-22 22:00:07 +00:00
4a1148cf7b
package/madwifi: add uci support for the propereq iwpriv setting
...
SVN-Revision: 13795
2009-01-01 17:29:58 +00:00
0b5333be4b
package/madwifi: fix typo in config handler
...
SVN-Revision: 13793
2009-01-01 13:59:06 +00:00
35078a6a52
hostapd,madwifi: rename agmode option to hwmode. 11a and 11g aren't the only allowed values
...
SVN-Revision: 13790
2008-12-31 19:09:26 +00:00
77d3329588
Move txpower settings after the interface comes up. Thanks alisonken1
...
SVN-Revision: 13502
2008-12-03 21:34:04 +00:00
bd8dad29fa
madwifi: ap+sta race conditions
...
SVN-Revision: 13208
2008-11-14 23:35:12 +00:00
a4f11ca22e
use pidfiles for hostapd/wpa_supplicant instead of killing all processes when bringing an interface down - fixes an issue with random hostapd death
...
SVN-Revision: 13078
2008-10-29 17:26:49 +00:00
7adb667a13
remove LED api abuse from r13032 per request fom nbd, gpioctl is now built by defualt
...
SVN-Revision: 13039
2008-10-23 15:14:54 +00:00
3800e56ddb
remove polarity from config file generation
...
SVN-Revision: 13034
2008-10-23 04:06:30 +00:00
0aaaf0e266
fix mistakes in last commit
...
SVN-Revision: 13033
2008-10-23 03:53:56 +00:00
5506db71c3
Simplify antenna selection and remove the need for gpioctl for the nanostation2.
...
SVN-Revision: 13032
2008-10-23 03:09:33 +00:00
6d6878bb10
fix polarity
...
SVN-Revision: 13031
2008-10-23 01:49:19 +00:00
14d0041023
implement uci config option for the nanostation antenna/polarity control (ns2 and ns5 supported)
...
SVN-Revision: 13028
2008-10-23 01:07:50 +00:00
f3e2fb3da0
madwifi: allow disabling of hardware ibss merges by setting the wifi-iface option sw_merge, which does the tsf sync in software instead. used to work around hardware issues with hw merges (ATIM window gets screwed up)
...
SVN-Revision: 12993
2008-10-16 21:26:24 +00:00
d94103514b
madwifi: set essid on to avoid association with different ssid (patch from #3937 )
...
SVN-Revision: 12759
2008-09-28 09:43:37 +00:00
b42c11bb48
add option to shutoff softled
...
SVN-Revision: 12709
2008-09-25 19:19:32 +00:00
Felix Fietkau
Jo-Philipp Wich
Vasilis Tsiligiannis
Nicolas Thill
Florian Fainelli
Andy Boyett
Travis Kemen