Commit Graph

631 Commits (76eb62e5afeac6ca5d90fb26eb34ac66df91a82e)

Author SHA1 Message Date
Felix Fietkau 83ab1982b4 x86: remove linux 4.4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-07 17:30:39 +01:00
Felix Fietkau 92bda4ae5c x86: switch to Linux 4.9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-07 17:30:35 +01:00
Stijn Segers 20996edd68 Kernel: bump to 4.4.44
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-01-27 11:18:27 +01:00
Chris Blake e3271d545d x86/64: Enable GPIO sysfs & GPIO LED support
The following changes enables GPIO sysfs as well as the LEDS_GPIO option
within the kernel. This is required to enable LEDs over a GPIO
interface.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-27 11:18:27 +01:00
Felix Fietkau b02c381b4b x86: fix sysupgrades on disks with 4k block size
Even when the disk uses 4k blocks, the partition table still uses units
of 512 byte sectors. Always use ibs=512 for the offsets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-25 08:13:15 +01:00
Felix Fietkau f4f8f4a180 x86: unify CPU_TYPE for legacy and geode
According to some reports, -march=pentium-mmx is a better choice for
older Geode CPUs than -march=geode anyway.

Bump the minimum architecture of the legacy target from i486 to
pentium-mmx. Anything older is not worth supporting anyway.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-24 13:15:01 +01:00
Chris Blake 0d9f922230 x86: add kernel module for sp5100_tco watchdog
This change adds the sp5100_tco driver as a kernel module for the x86
target. Specifically, this can be used by the PCEngines APU2/APU3. The
reason for having this as a kernel module is to allow users to
load/unload it on demand, as the I2C interface on the APU2/APU3 will not
work while this module is loaded. More info can be found on GitHub at
https://github.com/riptidewave93/LEDE-APU2/pull/5#issuecomment-255667736

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Chris Blake 4fab08183b x86: Add sp5100_tco AMD patches
This adds the following patches to the x86 target:

sp5100_tco: Add AMD Mullins platform support
sp5100_tco: Add AMD Carrizo platform support
sp5100_tco: fix the device check for SB800 and later chipsets
watchdog: sp5100_tco: properly check for new register layouts

With these added, the sp5100_tco driver can then be used on newer AMD
platforms, such as the PCEngines APU2/APU3 boards.

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2017-01-16 20:40:13 +01:00
Felix Fietkau 371b382a40 x86: remove the xen_domu subtarget
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau 1d6879eedd x86/generic: add xen DomU support
Copy the relevant config options from the xen_domu subtarget

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-16 20:40:13 +01:00
Felix Fietkau 749918911d x86: disable crashlog
It could cause crashes with some forms of virtualization, and it is
unlikely to work properly with most systems.
It's safer to just disable it.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 15:15:09 +01:00
Felix Fietkau e38fd1eced x86: disable a workaround for a buggy glibc version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 15:13:59 +01:00
Felix Fietkau 83eef37400 x86/64: enable the fusion scsi driver
Is it used by VMware Fusion by default. This allows images to boot
without further config changes in VMware.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 10:23:42 +01:00
Cezary Jackiewicz 4235cd0d95 x86: add kernel module for AMD CS5535/CS5536 audio chipset
Add support for the integrated AC97 sound device on motherboards
with AMD CS5535/CS5536 chipsets.
Tested on Wyse Winterm S30.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2017-01-06 15:35:20 +01:00
Yousong Zhou 6f61d8511e base-files: export x86 platform upgrade functions to common.sh
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:14 +01:00
Yousong Zhou fa37bdc05a x86: move sysupgrade.tgz only if it exists
To squash error messages at boot time

    mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:13 +01:00
Stijn Tintel 301301da2b x86/64: enable AES-NI support in kernel
The kernel will detect if the host supports this, so we can just enable
it in the kernel config.

Tested on an APU2 with AES-NI support and a KVM VM on a Xeon E5520 host
without AES-NI support.

Throughput over an IPsec tunnel between these 2 hosts increased from
~63Mbps to ~140Mbps. Ciphers: AES_GCM_16_256/PRF_HMAC_SHA2_512/ECP_521.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-01-04 13:19:58 +01:00
Sven Roederer 19059d84a4 linux: correct deps for x86-xen-domu target
depending packages have been moved to kernel-config
- kmod-xen-kbddev in 9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in 018807d

this will also fix imagebuilder

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2016-12-28 10:35:02 +01:00
Tedaz 1831e61699 x86/64: enable Hyper-V support in the x86_64 kernel config
Enabled Hyper-V network interface card driver, display adapter driver,
storage driver, keyboard driver, mouse driver and Hyper-V utility and
EFI boot support in the kernel for subtarget x86/64.
Convert the img file to vhd by Ubuntu qemu-img, rather than by the buildroot's
built-in qemu-img.

Tested on Windows Server 2008 r2 and 2012 r2 Gen1 and Gen2 VMs.

Signed-off-by: Tedaz <tedaz99999@hotmail.com>
2016-12-22 16:42:19 +01:00
Alexandru Ardelean 81a2f9d6f8 target/linux/x86/image: add explicit prefix to grub-mkimage command
In the latest version of grub-mkimage, the prefix option is mandatory.
Not supplying it fails with:
```
Prefix not specified (use the -p option).
```

In grub-2.02-beta2 a DEFAULT_DIRECTORY was defined
in `include/grub/osdep/hostfile_unix.h` as:
```
 #if defined (__NetBSD__)
 /* NetBSD uses /boot for its boot block.  */
 # define DEFAULT_DIRECTORY  "/"GRUB_DIR_NAME
 #else
 # define DEFAULT_DIRECTORY  "/"GRUB_BOOT_DIR_NAME"/"GRUB_DIR_NAME
 #endif
```

Where:
* GRUB_BOOT_DIR_NAME == boot
* GRUB_DIR_NAME == grub

This was used if the -p option was omitted.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Wilfried Klaebe 81e3c022e0 x86: fix GRUB_ROOT for Xen subtarget
Change grub's root device to xen/xvda,msdos1 for the x86_xen_domu
target so that it will boot without further changes.

Signed-off-by: Wilfried Klaebe <w+lede-project@chaos.in-kiel.de>
[Jo-Philipp Wich: fixed and rebased patch from FS#264, added subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-11-19 11:45:29 +01:00
Andreas Ziegler 40a16fec6a
x86-generic: add MMC support to boot off SD cards
MMC support has been added to x86-64 a while ago, there is no reason not
to support it in x86-generic as well.

Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
[Matthias Schiffer: add commit message]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-16 01:48:19 +01:00
Andreas Ziegler cf8aa18040
x86: add PATA support to generic and 64 subtargets
PATA support has been removed from x86-generic without any note in LEDE
r538. Not including them makes the generated images incompatible with older
(and some newer) hardware without any significant gain.

Add it back, and also add the same drivers (as far as available) to x86-64.

Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
[Matthias Schiffer: add back x86-generic, update commit message]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-16 01:48:19 +01:00
Matthias Schiffer fe6a3415e0
x86: refresh generic subtarget config
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-11-16 01:48:19 +01:00
Yousong Zhou d1000f81a8 x86: 64: enable pci hotplug and acpipnp
This will allow dynamically adding/removing at least virtio-net pci
devices which are quite the norm in cloud environment with QEMU/KVM

    netdev_add bridge,id=wan2,br=br-wan,helper=/home/yousong/.usr/libexec/qemu-bridge-helper
    device_add virtio-net-pci,id=devwan2,netdev=wan2,mac=11:22:33:22:11:00

The config was formed by selecting target x86/64 first, then select
CONFIG_HOTPLUG_PCI and CONFIG_HOTPLUG_PCI_ACPI with

    make kernel_menuconfig CONFIG_TARGET=subtarget

The following text tries to explain how the current config was formed

 1. CONFIG_PCI_LABEL and CONFIG_ATA_PIIX were removed because they were
    already enabled in x86 platform config
 2. CONFIG_ATA_SFF was removed because it was enabled in generic config
 3. CONFIG_NLS was removed because it will be selected by CONFIG_PCI_LABEL

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-10-13 17:04:26 +02:00
Mathias Kresin 92eaf27c62 use immediate set in target Makefiles
No functional change, it's just to have the same style everywhere. This
way I don't need to use any regex magic to extract all subtargets for
compile tests.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-10 15:30:38 +02:00
Felix Fietkau ca356887ed x86: disable MTD support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau be59b1718d x86: drop the use of block2mtd, use ext4/f2fs as overlay filesystem
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau c6eb09d5a3 x86: enable mkf2fs and e2fsprogs by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau 580f24bc96 x86: enable f2fs and loopback device support in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-10 12:17:39 +02:00
Felix Fietkau 056ce2474d x86: enable fpu for all subtargets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-30 10:51:21 +02:00
Lucian Cristian d3b21bb2bb x86: enable CPU frequency scaling
CPU frequency scaling enables the operating system to scale the CPU
frequency up or down in order to save power. CPU frequencies can be
scaled automatically depending on the system load, in response to ACPI
events, or manually by userspace programs.

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2016-08-03 15:30:13 +02:00
Felix Fietkau eceb6b924a x86: remove obsolete reference to $(PROFILE)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-20 10:13:50 +02:00
Florian Klink 4221288db7 x86/generic: enable CONFIG_SATA_VIA
This enables support for VIA SATA.
2016-07-19 14:26:32 +02:00
Lucian Cristian 2ea76bdf04 x64: add legacy IDE, fix VirtualBox bug #84 and Fujitsu Futro S550-2
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2016-07-12 15:44:34 +02:00
Felix Fietkau e892472b1e x86: enable kmod-igb on 64-bit by default
It is used on APU2 devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 19:43:18 +02:00
Felix Fietkau d5ee23ee27 x86: stop relying on hexdump for image build signature
Use perl to generate random number instead.
See https://github.com/freifunk-gluon/gluon/issues/811

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 18:39:11 +02:00
Felix Fietkau 7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Daniel Golle febc6cc5bf x86: lift generic x86-32 target
* build for pentium4 instead of i486
* enable PAE
* enable EFI support
* enable KVM guest and host support

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-07 08:58:40 +02:00
Daniel Golle 6c2fc113f3 x86: reorganize x86_32 support
copy current 'generic' target to new 'legacy' target.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-07 08:58:40 +02:00
Jo-Philipp Wich 699f7ecd15 x86: use sysfs DMI information to populate sysinfo
Use the DMI data available in sysfs to extract manufacturer and model info
and write it to /tmp/sysinfo/.

The data will be picked up by board_detect and can be used by e.g. LuCI to
display a more appropriate model description.

On an APU board the files will contain the following values:

    # cat /tmp/sysinfo/model
    PC Engines APU

    # cat /tmp/sysinfo/board_name
    pc-engines-apu

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-06 15:18:11 +02:00
Jo-Philipp Wich b8b23e0e64 x86: enable DMI and DMI_SYSFS
Enable support for DMI decoding in the kernel so that we can access
manufacturer and model information via sysfs.

Also remove redundant per-subtarget DMI overrides and preset a few
previously unset symbols popping up due to the now enabled DMI support.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-06 15:18:03 +02:00
Jo-Philipp Wich 1012701014 x86: generalize partition discovery for sysupgrade
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 13:30:58 +02:00
Russell Senior 0fd183c155 x86_64: enable mmc to support booting off sd
Improved support for PCEngines APU

Signed-off-by: Russell Senior <russell@personaltelco.net>
2016-05-23 12:17:55 +02:00
Felix Fietkau 98010ab489 kernel: remove ocf support, cryptodev-linux should be used instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 19:35:32 +02:00
Felix Fietkau 825ef34f15 x86: remove defunct etherboot image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:46:39 +02:00
Felix Fietkau 900b4865b8 x86: remove obsolete Config.in file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:46:14 +02:00
Felix Fietkau cebc410d02 x86: remove rdc specific kernel patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:42:55 +02:00
Felix Fietkau 2e5f84fc10 x86: remove legacy script/makefile code for rdc devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:39:04 +02:00
Felix Fietkau ca12fd431d x86: remove obsolete modules.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:36:34 +02:00