4b230e19fc
PATCH: Disable console terminal in Grub for alix2 target
...
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.
Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>
SVN-Revision: 31270
2012-04-12 23:30:27 +00:00
eed8e2a4fd
Disable by default padding of images
...
SVN-Revision: 30590
2012-02-16 17:54:07 +00:00
8676e49d9d
Allow gzipping of squashfs images with padded jffs2 partition
...
SVN-Revision: 30589
2012-02-16 17:54:04 +00:00
ab09db09fc
GZip only ext4 and padded images
...
SVN-Revision: 30588
2012-02-16 17:54:01 +00:00
b4f51343c6
Make gzipping of images configurable via menuconfig
...
SVN-Revision: 30587
2012-02-16 17:53:57 +00:00
2fc3fe1d09
Make the grub timeout configurable on x86 targets
...
Signed-off-by: Justus Winter <4winter@informatik.uni-hamburg.de>
SVN-Revision: 29786
2012-01-19 01:14:45 +00:00
b0d9bccafc
x86: allow VDI & VMDK images for all subtargets ( closes : #10255 )
...
SVN-Revision: 28518
2011-10-22 13:09:15 +00:00
dfc19a34b4
* adds support for Artec Thincan
...
Signed-of-By: Lauri Võsandi <lauri.vosandi@gmail.com>
SVN-Revision: 26919
2011-05-17 10:35:14 +00:00
937362f270
This patch provides an image suitable for the alix2*, alix3, and alix6 headless (non-VGA equipped) SBC's.
...
Note that the Alix6 uses GPIO 27 to disable wireless transmit (W_DIS#), whereas on all other versions this is used to actuate the speaker.
GPIO 1 : SIM select (Alix6)
GPIO 6 : LED1
GPIO 25 : LED2
GPIO 27 : LED3 or RFKILL (Alix6)
GPIO 24 : Soft switch 1
No kernel version bump. Added i2c-scx200-acb for lm-sensors support.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 26879
2011-05-13 06:06:42 +00:00
76bfcee5ea
gzip jffs2 images Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
...
SVN-Revision: 26625
2011-04-12 20:48:47 +00:00
d1f053d7ef
Enable padding of jffs2 images to user specified filesystem size Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
...
SVN-Revision: 26624
2011-04-12 20:46:34 +00:00
275c33c6f8
* Make sure that Geos baud-rate defaults correctly Changeset 23414 somehow got reordered. The unconditional default trumps later settings.
...
contributed by Philip Prindeville
SVN-Revision: 25068
2011-01-22 23:10:51 +00:00
4052849677
switch from ext2 to ext4 (w/o) journaling
...
SVN-Revision: 24084
2010-11-22 12:12:39 +00:00
e37cba7e95
target/linux: fix Geos baudrate. (thank you Philip Prindeville)
...
SVN-Revision: 23414
2010-10-12 15:27:34 +00:00
2bda5979ab
Geos -- new x86 subtarget definition This defines the Geos platform from Traverse Technologies in AUS.
...
This is a Geode LX800 with 512MB of DDR400 memory, 2 8139CP interfaces, 2 Solos ADSL2+ interfaces, USB, serial console, CF slot, and miniPCI slot.
I'll add support for the LEDs separately.
Signed-off-by: Philip A. Prindeville
SVN-Revision: 23390
2010-10-10 22:48:33 +00:00
7d045509fd
adjust image defaults for KVM
...
SVN-Revision: 22950
2010-09-06 02:31:37 +00:00
0f5d0f69ab
image: use internal qemu-img for vmdk and vdi images drop host dependencies on qemu-utils and VirtualBox
...
SVN-Revision: 22553
2010-08-09 04:22:39 +00:00
816a9b30f6
x86: build fully functional images on Mac OS X, now that grub is fixed
...
SVN-Revision: 21609
2010-05-28 19:48:21 +00:00
2c82cf966c
image/x86: fix typo when building on Mac OS X ( closes : #7303 )
...
SVN-Revision: 21401
2010-05-08 12:46:25 +00:00
d0773b2356
target/x86: cleanup image config options
...
SVN-Revision: 21365
2010-05-05 02:11:15 +00:00
482ee200cb
target/x86: use common config items for options shared between generic and olpc targets
...
SVN-Revision: 21364
2010-05-05 02:07:38 +00:00
5403c59f57
images: rename CONFIG_TARGET_ROOTFS_FSPART to CONFIG_TARGET_ROOTFS_PARTSIZE
...
SVN-Revision: 21362
2010-05-05 01:52:54 +00:00
3bca4b2094
package/grub: build a host grub and a target grub ( #7269 ) - use the host grub binary for grub install, but with target stage files - disable SSP (-fno-stack-protector) & Compile Time Buffer Checks (-U_FORTIFY_SOURCE) if appropriate - create a target grub package
...
SVN-Revision: 21305
2010-05-02 17:32:25 +00:00
a64f53f482
target/x86: add to changes missed from [21246] preventing .vdi & .vmdk image generation
...
SVN-Revision: 21277
2010-04-30 18:43:39 +00:00
99d4eee466
target/x86: various image changes * add a -combined suffix for grub+kernel+rootfs images and -rootfs for root filesystem only images * change ext from .image to .img * fix perms on VirtualBox .vdi image * gzip ext2 rootfs image as well
...
SVN-Revision: 21246
2010-04-29 03:03:47 +00:00
bd1fc43e6d
target/x86: rearrange image Makefile, indent, reorder, simplify, change some ifeq/ifneq tests
...
SVN-Revision: 21245
2010-04-29 00:47:05 +00:00
b6734d9753
target/x86: remove temporary files in image generation scripts
...
SVN-Revision: 21243
2010-04-29 00:41:22 +00:00
224db523da
replace old quote stripping with calls to qstrip macro
...
SVN-Revision: 21242
2010-04-29 00:32:44 +00:00
e2b57ecf5f
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files
...
SVN-Revision: 20834
2010-04-12 23:15:56 +00:00
15e8d2e0b7
add net5501 support
...
This patch brings up the net5501 platform.
Note that the x86/ target included support for all x86/ class
processors. That's not technically correct. This should be constrained
only to the "generic" subtarget. Every x86-class target that isn't
generic should be able to select only the optimizations/capabilities
applicable to that architectural variant.
It's also assumed that all x86 processors have keyboard & mouse ports,
ISA, DMI, ACPI... the embedded ones typically don't. Again, moving
that to the generic subtarget.
Fortunately, this was a fairly benign tweak.
The net5501 board includes the following logic:
Geode/LX processor
CS5535 super-I/O chip
PC87360 sensor chip
Via Rhine Ethernet controllers
Via Sata controllers
USB, LEDS, I2C
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
SVN-Revision: 20794
2010-04-11 12:36:55 +00:00
9ce3d38331
- clean up menu.lst template - make grub usage of vt0 selectable in menuconfig - choose appropriate default baudrate for soekris devices - fix generation of grub menu for iso images
...
SVN-Revision: 19681
2010-02-17 00:59:41 +00:00
e0fc8fb6aa
make console port editable through menuconfig, gzip ext2 images, add suitable defaults for Xen
...
SVN-Revision: 19612
2010-02-12 19:04:12 +00:00
29a020ffb3
remove handling of older unsupported kernels
...
SVN-Revision: 18955
2009-12-27 21:54:09 +00:00
a155e4fd53
add rootwait option to the kernel command line ( #6209 )
...
SVN-Revision: 18672
2009-12-06 09:12:34 +00:00
917ef8e84b
fix grub image target dependency
...
SVN-Revision: 18446
2009-11-18 10:13:40 +00:00
93fe520994
change x86 image generation handling to treat only olpc specially
...
SVN-Revision: 18441
2009-11-17 19:49:25 +00:00
e49c2d7691
merge the olpc target with the x86 target, both tested and running
...
SVN-Revision: 18279
2009-11-03 01:02:39 +00:00
ac8c461d50
x86: use libata in 2.6.30, fix pata support for sc1200 (used on wrap)
...
SVN-Revision: 17722
2009-09-25 14:15:21 +00:00
a9c958c2de
make kernels use /etc/preinit by default
...
SVN-Revision: 15840
2009-05-14 10:20:53 +00:00
9209af2c00
Fix building of iso filesystem This fixes two errors when building iso filesystem:
...
a) dir root.grub/boot doesn't get created.
b) the creation of .image file by gen_image.sh which apparently is not needed
when building an iso.
Signed-off-by: Vasilis Tsiligiannis <b_tsiligiannis@silverton.gr>
SVN-Revision: 15682
2009-05-07 13:50:09 +00:00
76fe41a8d3
The image was selected from a wrong location. Fixes bug #4618
...
SVN-Revision: 14948
2009-03-19 13:02:06 +00:00
e0440fefb6
Use wildcards to copy grub stage files, will cover both i386-pc and i386-openwrt directory names
...
SVN-Revision: 13963
2009-01-10 23:12:21 +00:00
2273aadfb2
fix grub installation on target images, regression caused by multi-libc support
...
SVN-Revision: 13936
2009-01-08 16:51:01 +00:00
5c95516f24
Use VBoxManage instead of obsolete vditool to generate VirtualBox images.
...
SVN-Revision: 13821
2009-01-02 14:35:18 +00:00
45cc45cac5
Add support for creating VMware vmdk images #1317
...
SVN-Revision: 13158
2008-11-09 17:39:09 +00:00
2b5ce63303
x86: don't attempt to compile grub on darwin
...
SVN-Revision: 11599
2008-06-28 17:54:44 +00:00
b0e669ee13
fix x86 image build order ( fixes #3317 )
...
SVN-Revision: 11359
2008-06-04 21:55:25 +00:00
08fa2c3feb
fix typo
...
SVN-Revision: 11300
2008-05-30 16:59:36 +00:00
8c0c28eef2
Add virtualbox images to x86 ( #3475 )
...
SVN-Revision: 11298
2008-05-30 16:50:37 +00:00
e7432794fa
fix image generation on x86
...
SVN-Revision: 10610
2008-03-17 12:37:52 +00:00
Jo-Philipp Wich
Vasilis Tsiligiannis
Nicolas Thill
John Crispin
Daniel Dickinson
Imre Kaloz
Alexandros C. Couloumbis
Andy Boyett
Felix Fietkau
Florian Fainelli
Hauke Mehrtens
Steven Barth