74c13f06df
ramips: ramips_esw: don't touch GPIO_PURPOSE register
...
It must have been set by the board initialization code.
SVN-Revision: 24332
2010-12-08 10:15:04 +00:00
3b9a6adc7d
ramips: ramips_esw: convert it to be a platform driver
...
SVN-Revision: 24331
2010-12-08 10:15:00 +00:00
889729df01
ramips: ramips_esw: move hardware initialization into a separate function
...
SVN-Revision: 24330
2010-12-08 10:14:58 +00:00
8957f39064
ramips: ramips_esw: use a private structure for the functions
...
SVN-Revision: 24329
2010-12-08 10:14:54 +00:00
47dd3b9fea
ramips: use tabs instead of spaces in mach-f5d8235-v2.c
...
SVN-Revision: 24268
2010-12-05 20:14:30 +00:00
21c8d63505
ramips: add support for Belkin F5D8235 v2 board
...
No support for usb for now.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 24126
2010-11-24 10:01:23 +00:00
64b16b9f34
ramips: Use NET_IP_ALIGN instead of hardcoding 2
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24124
2010-11-24 10:01:18 +00:00
624cfc5c91
ramips: DMA map the correct RX skb size
...
The skb_reserve call prior to DMA mapping the RX skb reduced the skb
data len by 2. To not allow DMA to write behind the skb we should pass
the correct skb data len to the device.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24123
2010-11-24 10:01:16 +00:00
f833e399f2
ramips: Don't trigger BUG_ON due to skb allocation failure
...
Instead just drop the rx'ed frame silently and reuse the already
available buffer.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24122
2010-11-24 10:01:12 +00:00
c6e4124855
ramips: Remove unnecessary skb_put
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 24121
2010-11-24 10:01:08 +00:00
69355ee10e
ramips: Allow ethernet interface to be taken down and up again
...
Taking the ramips ethernet interface down and up again resulted in the
driver not receiving any frames anymore. Fix this by correctly disabling
interrupts in the hw on ifdown.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 23243
2010-10-05 14:10:34 +00:00
e5b081335e
ramips: Ralink RT305x, support for Prolink PWH2004 (Abocom5205)
...
The attached patch adds a preliminary support for Prolink PWH2004 board
(Ralink RT305x based). LAN and flash appear to work. However, the USB
port and WLAN I have not managed to activate properly yet, but that
problem appears to be present with other rt305x targets as well(?).
Signed-off-by: Esa Hyytia <esa at netlab.tkk.fi>
SVN-Revision: 23129
2010-09-27 14:43:34 +00:00
462dabc7f5
ramips: add support for Sparklan WCR-150GN board
...
This patch adds support for Sparklan WCR-150GN board.
Network configuration should be tweaked to make it work fully. The
reason it's not in this patch is that ramips target should be modified
to support different /etc/config/network files for different boards.
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 22658
2010-08-15 09:43:07 +00:00
2e45ce264d
ramips: register ethernet device on the RT-N15
...
SVN-Revision: 22213
2010-07-15 19:45:46 +00:00
c2ebadc504
ramips: add generic ethernet device for the RT288x
...
SVN-Revision: 22212
2010-07-15 19:45:43 +00:00
0d8c036e56
ramips: add mdio_cfg configuration for the ethernet driver
...
SVN-Revision: 22211
2010-07-15 19:45:40 +00:00
d14e9e706e
ramips: Fix bridging in ramips ethernet driver
...
Bridging between the ramips ethernet driver and rt2800pci was somewhat
broken. Frames received by the ethernet driver which were passed to the
wifi driver for transmission were sometimes corrupted or sent out with
huge delays.
The reason for this is the missing assignment of skb->tail in the ramips
ethernet driver's rx path resulting in skb->tail pointing to skb->data.
Since skb->tail is used by mac80211 it writes into skb->data which messes
up the frames content.
Fix this by using skb_put to correctly set skb->len and skb->tail.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 22172
2010-07-13 16:52:07 +00:00
27375c5139
ramips: protect GPIO register access with a spinlock
...
SVN-Revision: 22171
2010-07-13 16:52:04 +00:00
971b7ff50e
Fix ramips build when CONFIG_RALINK_DEV_GPIO_BUTTONS is not set.
...
Signed-off-by: Helmut Schaa
SVN-Revision: 21643
2010-05-31 11:57:32 +00:00
c24397b385
ramips: merge slab patch
...
SVN-Revision: 21607
2010-05-28 19:45:28 +00:00
7ac21ada55
ramips: use COMMAND_LINE_SIZE directly
...
SVN-Revision: 21606
2010-05-28 19:45:24 +00:00
60cbdbb686
ramips: use KEY_RESTART and KEY_WPS_BUTTON code for the appropriate buttons
...
SVN-Revision: 21083
2010-04-22 09:25:37 +00:00
a423c3abee
ramips: annotate device register function prototypes with __init
...
SVN-Revision: 20627
2010-03-31 08:40:28 +00:00
a9f313edea
ramips: register wifi device for the RT2880 based boards
...
SVN-Revision: 20625
2010-03-31 08:40:23 +00:00
9f3d673dbc
ramips: add wifi device for the RT2880 as well
...
SVN-Revision: 20624
2010-03-31 08:40:20 +00:00
1c25cfcde0
ramips: register wifi device on the rt305x based boards
...
SVN-Revision: 20616
2010-03-30 21:24:10 +00:00
6f4052abe0
The ralink rt305x board has a wireless card that can be used with the rt2800pci driver (it does not work yet but basically should). Hence, register the appropriate platform device to allow developing/testing the rt2800pci driver. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
SVN-Revision: 20599
2010-03-30 12:04:05 +00:00
3ad14f304e
Fix the base address of the wireless card. Otherwise it is not possible to register a platform wireless device as it overlaps with something else. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
...
SVN-Revision: 20596
2010-03-30 10:06:05 +00:00
4267623e2e
ramips_eth: cleanup mac_address changing
...
SVN-Revision: 19464
2010-01-31 17:56:36 +00:00
b16aaf5fac
ramips_eth: update register offsets
...
SVN-Revision: 19463
2010-01-31 17:56:33 +00:00
72b08b729a
ramips_eth: pass sys_clk via platform_data
...
SVN-Revision: 19462
2010-01-31 17:56:30 +00:00
9ab88ce62d
ramips_eth: add helper functions to {ed,dis}able interrupts
...
SVN-Revision: 19446
2010-01-31 12:48:53 +00:00
224edd2575
ramips_eth: remove unnecessary typecasts
...
SVN-Revision: 19445
2010-01-31 12:48:51 +00:00
8aceaf96be
ramips_eth: simplify tx_next computation
...
SVN-Revision: 19444
2010-01-31 12:48:48 +00:00
21b06bd2c0
ramips_eth: simplify tx descriptor initialization
...
SVN-Revision: 19443
2010-01-31 12:48:46 +00:00
d0fb66e3a4
ramips_eth: pass 'raeth_priv' struct directly to dma specific functions
...
SVN-Revision: 19442
2010-01-31 12:48:43 +00:00
f0be6ab20c
ramips_eth: convert to use netdev_ops
...
SVN-Revision: 19440
2010-01-31 12:48:38 +00:00
d37975f6b2
ramips_eth: fix invalid register writes
...
SVN-Revision: 19417
2010-01-30 15:26:02 +00:00
43e1dd85c2
ramips_eth: move memset call out from the loop
...
SVN-Revision: 19416
2010-01-30 15:25:59 +00:00
ea4ce3b6fd
ramips_eth: header file cleanup
...
SVN-Revision: 19415
2010-01-30 15:25:57 +00:00
67cd819da6
ramips_eth: coding style cleanup
...
SVN-Revision: 19414
2010-01-30 15:25:55 +00:00
a4e85bbceb
ramips: register gpio buttons on the Fonera 2.0N board
...
SVN-Revision: 19413
2010-01-30 15:25:52 +00:00
8823482a02
ramips: register gpio buttons on the WHR-G300N board
...
SVN-Revision: 19412
2010-01-30 15:25:49 +00:00
35f47a3654
ramips: register gpio buttons on the V22RW-2x2 board
...
SVN-Revision: 19411
2010-01-30 15:25:47 +00:00
30a397fd5e
ramips: register gpio buttons on the DIR-300 revB board
...
SVN-Revision: 19410
2010-01-30 15:25:44 +00:00
f9b053e87f
ramips: fix wrong base addresses for the RT288x
...
SVN-Revision: 19409
2010-01-30 15:25:41 +00:00
8448caa6ad
ramips: include 'linux/leds.h' from 'dev-gpio-leds.h'
...
SVN-Revision: 19408
2010-01-30 15:25:36 +00:00
94c9590e91
ramips: rename dev_gpio_leds.h to dev-gpio-leds.h
...
SVN-Revision: 19407
2010-01-30 15:25:33 +00:00
55185915de
ramips: cleanup WZR-AGL300NH board support file
...
SVN-Revision: 19406
2010-01-30 15:25:29 +00:00
0530dd9849
ramips: register gpio-buttons on the RT-N15 board
...
SVN-Revision: 19405
2010-01-30 15:25:25 +00:00
Gabor Juhos
John Crispin