b33c3e1b7c
sunxi: Orange Pi R1: configure USB Ethernet controller.
...
Now the USB port is the WAN port.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2018-01-22 22:59:38 +01:00
f12a32630f
treewide: use the generic board_name function
...
Use the generic function instead ot the target specific ones.
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-07-15 23:13:34 +02:00
0ac00c931c
sunxi: use fwtool for checking sdcard images
...
To achieve this, device tree compatible string was used as boardname and
the value of it will be checked against supported_devices list.
It should be noted that we do not distinguish between
sun5i-a13-olimex-som and sun5i-a13-olinuxino as they share the same dts
file.
The other thing is that we need to gunzip the generated firmware to do
fwtool check.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2017-01-05 11:09:15 +01:00
dc92917409
image / basefiles: make console password configurable
...
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
67e1c87012
all: drop old uci-defaults.sh
...
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
8298dfef5c
sunxi: fix board.d permissions
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47760
2015-12-04 14:39:20 +00:00
b6a9c5c400
sunxi: switch from uci-defaults to board.d
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 47758
2015-12-04 14:32:52 +00:00
7146957461
sunxi: add support for Lamobo R1
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 44214
2015-01-30 00:17:16 +00:00
45e8630a4f
sunxi: use sunxi_board_name when generating default network settings
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 44213
2015-01-30 00:14:17 +00:00
1e0c22507a
sunxi: bump kernel to 3.18 - refresh patches - add bananapro, cubietruck, mele_m9 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43900
2015-01-09 19:35:14 +00:00
61a708154d
sunxi: fix network config on A20-OLinuXino-LIME
...
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43190
2014-11-06 02:23:12 +00:00
7f707a5216
sunxi: update devtree name in network setup for pcduino3 as preparing for 3.18
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 43149
2014-11-02 10:11:36 +00:00
240f04765f
sunxi: add default interface for bananaPi
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42606
2014-09-17 23:15:30 +00:00
bf43c8e717
sunxi: fix typo in uci-defaults network config
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40895
2014-06-01 12:18:53 +00:00
5e47b57e57
sunxi: various a13 changes - add rtl8192cu into A13 Olinuxino profile - make wlan0 the default interface
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40617
2014-05-01 10:23:55 +00:00
c754682724
sunxi: add default network config for missing boards
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 40612
2014-04-30 22:04:34 +00:00
a51ffcc1d1
sunxi: init eth0 as lan instead of wan, add a couple boards
...
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39973
2014-03-20 22:46:18 +00:00
f58bfd1df4
sunxi: rework target - update kernel to 3.12 - add patches for clocks, i2c, usb, sid, rtc - support common image for A10/A13/A20 - add support for a couple boards - most drivers are configured into the kernel as of now
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 38811
2013-11-14 23:12:52 +00:00
cb07269988
sunxi: add new target
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38651
2013-11-05 08:00:34 +00:00
Hauke Mehrtens
Mathias Kresin
Yousong Zhou
John Crispin
Jo-Philipp Wich
Zoltan Herpai
Nicolas Thill
Luka Perkov