10f432ba9d
fix rtl8366s OF binding
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36323
2013-04-12 18:56:05 +00:00
687b3f04ce
mpc85xx: set preinit interface to eth0 by default
...
This makes the WDR4900 accessible via ethernet in
failsafe mode.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36322
2013-04-12 18:30:25 +00:00
40e15b1fbf
mpc85xx: Generate fdt for P1020RDB
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36321
2013-04-12 18:30:24 +00:00
f43bdf34cd
mpc85xx: Add P1020RDB board support
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36320
2013-04-12 18:30:22 +00:00
d5f87e193c
add VG3503J support
...
this adds basic support. the bootloader on these units is locked down.
until we have a replacement we can do basic testing with these env variables in uboot.
set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000
unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.
please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36315
2013-04-11 19:18:07 +00:00
fbc1e3732b
add FE phy firmware
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36314
2013-04-11 19:17:48 +00:00
b591e15f36
This adds Gateworks Laguna family board support. Note that some Laguna boards have SPI flash and others have NOR flash, thus the size/erasesize are detected dynamically.
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 36313
2013-04-11 16:04:31 +00:00
0d32469457
add missing pinmux patch
...
Fix lantiq pinmux which affected PCI and USB.
Known affected boards are: ARV4518 and ARV7518.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36312
2013-04-11 07:12:37 +00:00
87395ec919
mac80211: fix a client mode reconnect issue
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36311
2013-04-10 21:17:33 +00:00
6436b3f736
cns3xxx: fix USB ehci/ohci platform driver
...
Update ehci/ohci driver registration to conform to the new platform
drivers.
This fixes missing USB host support in 3.8.x
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 36309
2013-04-10 16:20:50 +00:00
edd8048107
kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base
...
Fixes booting on single-core CNS3xxx devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36308
2013-04-10 16:07:50 +00:00
06733c2650
kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36307
2013-04-10 13:45:12 +00:00
a41fb84d2f
ath9k: fix an AR9580 specific crypto related stability issue
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36306
2013-04-10 13:26:08 +00:00
e01a24f4f8
mac80211: revert the queue length to the default (reduction obsoleted by the use of fq_codel)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36305
2013-04-10 13:11:33 +00:00
7fa2957103
kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36304
2013-04-10 13:11:29 +00:00
df3d4690bd
kernel: keep dropped stats in fq_codel
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36303
2013-04-10 13:11:25 +00:00
ec3a8846fc
kernel: tune fq_codel defaults for common netdevice speeds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36302
2013-04-10 13:11:21 +00:00
307965026a
kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36301
2013-04-10 13:11:16 +00:00
915969ff2c
kernel: refresh patches against 3.9-rc6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36297
2013-04-09 16:16:20 +00:00
c3366cd164
kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c
...
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36296
2013-04-09 16:16:16 +00:00
518d6a9273
kernel: backport switch user API changes after r36283
...
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36295
2013-04-09 15:47:01 +00:00
88c418bc75
qos-scripts: add queue length and quantum limit, suggested by dtaht
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36294
2013-04-09 14:59:10 +00:00
fb47fd0d6b
unbreak portmapping - typo fix
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36293
2013-04-09 14:39:01 +00:00
7ca7bc501e
iwinfo: fix frequency/channel and channel/frequency conversions to properly implement 802.11j
...
SVN-Revision: 36292
2013-04-09 14:37:55 +00:00
9f21b979f4
buildroot: enable software floating point for MIPS64 targets
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36291
2013-04-09 14:36:09 +00:00
bc7b310959
move memory detect node to dtsi files
...
Signed-of-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36290
2013-04-09 14:19:36 +00:00
48feea4861
Add Netgear WNCE2001 (OF version)
...
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
2013-04-09 14:19:33 +00:00
e468abcae0
remove bootargs from dts
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36288
2013-04-09 14:19:28 +00:00
82c3b7ce26
add ofpart info to the devicetrees
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36287
2013-04-09 14:19:24 +00:00
f1e9d30ffc
add sample swconfig portmap
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36286
2013-04-09 14:19:20 +00:00
fcd962cc71
set of_node before registring the switch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36285
2013-04-09 14:19:17 +00:00
04dcd12c91
add portmap support to userland
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36284
2013-04-09 14:19:13 +00:00
fff58a5801
allow loading port maps from OF
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36283
2013-04-09 14:19:09 +00:00
f13ae9965c
add "swconfig list" support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36282
2013-04-09 14:19:05 +00:00
f90f025f20
netifd: fix route / route6 regression ( #13303 )
...
SVN-Revision: 36281
2013-04-09 12:21:12 +00:00
3abc915522
Remove deprecated ip6slaac option * use proto=dhcpv6 with reqprefix=no instead
...
SVN-Revision: 36280
2013-04-09 12:12:30 +00:00
2c087dc785
Remove obsoleted ipv6-support meta-package
...
SVN-Revision: 36279
2013-04-09 09:45:51 +00:00
ea94d66b0f
Adapt default network configuration for IPv6
...
SVN-Revision: 36278
2013-04-09 08:03:08 +00:00
3e4b2af125
Enable native IPv6 support by default
...
SVN-Revision: 36277
2013-04-09 08:02:55 +00:00
130f67210a
ramips: TEW-691GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36276
2013-04-08 12:34:17 +00:00
a4a148f222
ramips: rt3883: enable the AR8216 driver
...
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36275
2013-04-08 12:34:15 +00:00
a9d977b2af
ramips: add profile for the Omnima EMB-HPM board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36274
2013-04-08 11:12:04 +00:00
82705b30b3
ramips: OMNI-EMB-HPM.dts fixes
...
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36273
2013-04-08 11:12:03 +00:00
909fabe574
ramips: add mdio-bus node to rt3883.dtsi
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36272
2013-04-08 11:12:02 +00:00
78ee80f2e8
ramips: fix MDIO/PHY handling
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36271
2013-04-08 11:12:01 +00:00
30e5bae84a
ramips: fix console speed for OMNI-EMB-HPM
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36270
2013-04-08 08:24:51 +00:00
cd7ce5226d
ramips: avoid invalid pointer dereference in pinmux code
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36269
2013-04-08 08:24:50 +00:00
4c85227cf4
ramips: TEW-692GR.dts fixes
...
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268
2013-04-08 07:11:35 +00:00
c42c4837b9
ath9k: fix a tx processing race condition on AR9300+
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36267
2013-04-07 22:05:45 +00:00
3a0e6c06e9
ath9k_htc: accept firmware versions newer than 1.3
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36266
2013-04-07 22:05:41 +00:00
John Crispin
Gabor Juhos
Luka Perkov
Felix Fietkau
Florian Fainelli
Jo-Philipp Wich
Steven Barth