Commit Graph

86 Commits (6ff025f306fbf2cf73e1b711b3da826886fa8b6b)

Author SHA1 Message Date
Hauke Mehrtens 41b3383499 brcm47xx: Add edimax PS1208mfg support
Thank you clemvangelis for the patches. (closes #7672)

SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
Imre Kaloz 7fa8ba095b Toto, we don't support Linux 2.4 anymore..
SVN-Revision: 23245
2010-10-05 14:15:46 +00:00
Jo-Philipp Wich 06dd991494 broadcom-diag: SimpleShare: expose power button as reset to the system, remove actual reset button - it's hardwired and will reset the SoC (#7928)
SVN-Revision: 23043
2010-09-13 01:35:39 +00:00
Gabor Juhos 19654fd1c2 package/broadcom-diag: use broadcast_uevent
SVN-Revision: 22860
2010-08-31 20:06:32 +00:00
Hauke Mehrtens 788561a909 brcm47xx: fix warning introduced in r22516.
SVN-Revision: 22521
2010-08-06 22:49:37 +00:00
Hauke Mehrtens 7640f89045 brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/

This closes #7702.

SVN-Revision: 22516
2010-08-06 20:21:32 +00:00
Claudio Mignanti 2d86ea7bf3 massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
SVN-Revision: 22145
2010-07-12 14:06:13 +00:00
Felix Fietkau c788e49ab7 broadcom-diag: detect more variants of SimpleTech SimpleShare
SVN-Revision: 22112
2010-07-10 00:51:28 +00:00
Markus Wigge d306c9cb21 fix GPIO pin for G3GV2-VF
Signed-off-by: Niclas Koeser <nks@informatik.uni-kiel.de>

SVN-Revision: 22018
2010-07-01 16:23:38 +00:00
Felix Fietkau 543d870e82 remove linux 2.4 support from several packages
SVN-Revision: 21954
2010-06-26 20:43:41 +00:00
Nicolas Thill 4e42dff799 package/broadcom-diag: bump release number (missed from r20737 & r20869)
SVN-Revision: 21527
2010-05-21 15:32:29 +00:00
Nicolas Thill 7d4022d539 bump a bunch of packages updated after 10.03
SVN-Revision: 21477
2010-05-16 13:46:57 +00:00
Nicolas Thill 138a5b8b4f package/broadcom-diag: fix USB led polarity on Asus WL-HDD (closes: #7055)
SVN-Revision: 20869
2010-04-15 03:20:28 +00:00
Markus Wigge 44c1a9e5e5 added WRT54G3GV2-VF detection to broadcom-diag
+ diag now recognizes the router
+ basic LEDs work
- 3G LED for blink does not work as for the old version
  so I removed it. Maybe some GPIO probing might help.

SVN-Revision: 20737
2010-04-07 07:45:54 +00:00
Florian Fainelli 1e72384edb add missing hunks to recognize the Microsoft MN-700 device (#6749)
SVN-Revision: 19896
2010-02-28 11:09:50 +00:00
Jo-Philipp Wich 0cde46b3e7 add support for OvisLink WL-1600GL
SVN-Revision: 19262
2010-01-21 23:48:23 +00:00
Florian Fainelli 61a1c4d06b add western digital netcenter support to broadcom-diag (#6124) original patch from Christoph Muellner
SVN-Revision: 19008
2010-01-02 16:22:20 +00:00
Felix Fietkau 6ec88dfdfc add Askey RT210W support (patch from #6380)
SVN-Revision: 18922
2009-12-24 11:00:31 +00:00
Felix Fietkau 46f75ee869 add WRT300N v1.1 support (patch from #6379)
SVN-Revision: 18921
2009-12-24 10:58:09 +00:00
Andy Boyett a5f80019ef bump some revisions and update copyrights
SVN-Revision: 17554
2009-09-10 10:07:04 +00:00
Felix Fietkau 8c7c2d9116 Added identification of WRT610N and its button/led definitions.
Signed-off-by: Tomas Kopal <Tomas.Kopal@altap.cz>

SVN-Revision: 17434
2009-08-28 15:03:36 +00:00
Florian Fainelli 31fbb89034 add support for the WRT160N, patch from Westley Paynter
SVN-Revision: 17031
2009-07-27 13:00:23 +00:00
Hauke Mehrtens b63576359d D-Link DIR-320 support (broadcom-diag)
This patch adds D-Link DIR-320 support to broadcom-diag.

"reserved" button is the button on the right side of the router without
any title. I'm not sure if I've selected right name.

Signed-off-by: Leonid Evdokimov <leon@darkk.net.ru>

SVN-Revision: 16443
2009-06-14 09:39:43 +00:00
Florian Fainelli f3f5cfd4ee recognize WAP54Gv2 and assigne LED and GPIOs (#5335)
SVN-Revision: 16434
2009-06-13 15:56:21 +00:00
Florian Fainelli 74f8ea728a fix detection of motorola wr850g, thanks to Vinicius Fonseca, (#4710)
SVN-Revision: 16367
2009-06-07 09:28:29 +00:00
Felix Fietkau 34939cad39 get rid of $Id$ - it has never helped us and it has broken too many patches ;)
SVN-Revision: 15242
2009-04-17 14:09:46 +00:00
Felix Fietkau f5fba5bc3c Asus WL-330gE Support
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>

SVN-Revision: 14624
2009-02-22 18:45:39 +00:00
Felix Fietkau 3a95badb10 fix broadcom-diag on linux 2.6.28 (#4633)
SVN-Revision: 14618
2009-02-22 17:12:36 +00:00
Felix Fietkau c2b878a384 add initial 2.6.28 support for brcm47xx target
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 13909
2009-01-06 22:36:41 +00:00
Florian Fainelli 10f4e46cf9 Add proper LED support to broadcom-diag for the Asus WL-320gE/gP routers (#4062)
SVN-Revision: 12855
2008-10-04 16:51:03 +00:00
Felix Fietkau 1081dbcb41 broadcom-diag: reset the interrupt mask of configured leds to avoid spurious interrupts
SVN-Revision: 12030
2008-07-31 01:33:14 +00:00
Gabor Juhos 9b2e1bdd8d fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788)
SVN-Revision: 11935
2008-07-26 16:10:44 +00:00
Florian Fainelli c4f83e0b0c Add support for WRT600N and WRT600N v1.1 (#3535)
SVN-Revision: 11740
2008-07-07 14:17:02 +00:00
Felix Fietkau f7e09198fe (1/6) bcm57xx: init from diag
I've been working to finish up the bcm57xx module package nbd
posted a few months ago.  I am no expert, just had some spare
time and some motivation.  Here is the background:

https://dev.openwrt.org/ticket/2744

This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP.  If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11466
2008-06-15 11:09:27 +00:00
Florian Fainelli 6fab96eb3e Add Siemens SE505v2 detection to diag (#3416)
SVN-Revision: 11308
2008-05-31 12:32:05 +00:00
Peter Denison f027ecb2cf Stopgap compilation fixes for diag and switch under 2.6.25
SVN-Revision: 11231
2008-05-20 22:33:45 +00:00
Florian Fainelli 99b6b35be3 Add support for Asus wl-520gc
SVN-Revision: 11145
2008-05-16 01:18:57 +00:00
Peter Denison 06c7c04288 Fix typo in broadcom-diag LED output enable
SVN-Revision: 11125
2008-05-12 19:46:53 +00:00
Andy Boyett c15de3860c Add support for the WL-500gP v2
SVN-Revision: 10693
2008-03-31 08:04:56 +00:00
Andy Boyett e229b1b849 Add support for the ASUS WL-520gU
SVN-Revision: 10692
2008-03-31 08:04:27 +00:00
Andy Boyett a6a59ce520 broadcom-diag cleanup
SVN-Revision: 10691
2008-03-31 08:04:06 +00:00
Michael Büsch faa14263f5 ssb: Make the GPIO API reentrancy safe.
SVN-Revision: 10496
2008-02-19 15:22:17 +00:00
Michael Büsch 66dec6d8a1 ssb: Update the GPIO API
SVN-Revision: 10495
2008-02-19 13:52:57 +00:00
Florian Fainelli a4ca693c7e Add back Sitecom WL-105b support
SVN-Revision: 10142
2008-01-08 14:27:48 +00:00
Felix Fietkau 85ad2a43a0 add switch gpio init for bcm57xx (untested, see #2744)
SVN-Revision: 9642
2007-11-30 21:58:14 +00:00
Felix Fietkau 66a69b145a add extra wrt350n leds (patch from #2745)
SVN-Revision: 9641
2007-11-30 21:58:06 +00:00
Felix Fietkau e3ecefbd23 fix adm switch misdetection, which led to bogus button events that caused the system to shut down
SVN-Revision: 9555
2007-11-16 03:11:09 +00:00
Florian Fainelli 874935fe41 Add detection support for Buffalo WHR-G125 from #2611
SVN-Revision: 9548
2007-11-13 07:39:29 +00:00
Felix Fietkau 9b486d6381 fix wr850g detection (#1936)
SVN-Revision: 9492
2007-11-03 16:17:53 +00:00
Felix Fietkau a9d683ca91 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
SVN-Revision: 8694
2007-09-08 19:55:42 +00:00