164dd71afe
broadcom-diag: add missing break into switch case statement.
...
SVN-Revision: 31506
2012-04-28 23:30:05 +00:00
8dd93fbc1f
broadcom-diag: add missing brackets breakign the detection logic ( #10836 )
...
SVN-Revision: 30610
2012-02-17 09:04:23 +00:00
fd74a50df7
broadcom-diag: fix WRT150N/WRT160N detection (patch from #10836 )
...
SVN-Revision: 30477
2012-02-12 15:43:14 +00:00
a9e42130a5
broadcom-diag: add support for some new devices
...
There is still no Ethernet driver for these devices in trunk.
Thanks George Kashperko for the patch.
SVN-Revision: 29735
2012-01-13 20:21:15 +00:00
773ce8c319
broadcom-diag: add support for bcma
...
SVN-Revision: 27905
2011-08-04 20:08:57 +00:00
8428ebd8e8
brcm47xx: update patches
...
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates
SVN-Revision: 27902
2011-08-04 20:04:54 +00:00
4c18da3df6
brcm47xx: add initial support for devices with bcma bus.
...
Ethernet and wifi are not working and this is highly experimental.
SVN-Revision: 27301
2011-06-28 22:21:57 +00:00
b62cc9ae9b
brcm47xx: add Netgear WNR834BV1
...
Thank you realopty for the patch.
This closes #7702
SVN-Revision: 26537
2011-04-08 19:22:09 +00:00
41b3383499
brcm47xx: Add edimax PS1208mfg support
...
Thank you clemvangelis for the patches. (closes #7672 )
SVN-Revision: 24217
2010-12-02 21:27:54 +00:00
7fa8ba095b
Toto, we don't support Linux 2.4 anymore..
...
SVN-Revision: 23245
2010-10-05 14:15:46 +00:00
06dd991494
broadcom-diag: SimpleShare: expose power button as reset to the system, remove actual reset button - it's hardwired and will reset the SoC ( #7928 )
...
SVN-Revision: 23043
2010-09-13 01:35:39 +00:00
19654fd1c2
package/broadcom-diag: use broadcast_uevent
...
SVN-Revision: 22860
2010-08-31 20:06:32 +00:00
788561a909
brcm47xx: fix warning introduced in r22516.
...
SVN-Revision: 22521
2010-08-06 22:49:37 +00:00
7640f89045
brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2
...
Thank you realopty for the patch.
tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/
This closes #7702 .
SVN-Revision: 22516
2010-08-06 20:21:32 +00:00
2d86ea7bf3
massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950
...
SVN-Revision: 22145
2010-07-12 14:06:13 +00:00
c788e49ab7
broadcom-diag: detect more variants of SimpleTech SimpleShare
...
SVN-Revision: 22112
2010-07-10 00:51:28 +00:00
d306c9cb21
fix GPIO pin for G3GV2-VF
...
Signed-off-by: Niclas Koeser <nks@informatik.uni-kiel.de>
SVN-Revision: 22018
2010-07-01 16:23:38 +00:00
543d870e82
remove linux 2.4 support from several packages
...
SVN-Revision: 21954
2010-06-26 20:43:41 +00:00
4e42dff799
package/broadcom-diag: bump release number (missed from r20737 & r20869)
...
SVN-Revision: 21527
2010-05-21 15:32:29 +00:00
7d4022d539
bump a bunch of packages updated after 10.03
...
SVN-Revision: 21477
2010-05-16 13:46:57 +00:00
138a5b8b4f
package/broadcom-diag: fix USB led polarity on Asus WL-HDD ( closes : #7055 )
...
SVN-Revision: 20869
2010-04-15 03:20:28 +00:00
44c1a9e5e5
added WRT54G3GV2-VF detection to broadcom-diag
...
+ diag now recognizes the router
+ basic LEDs work
- 3G LED for blink does not work as for the old version
so I removed it. Maybe some GPIO probing might help.
SVN-Revision: 20737
2010-04-07 07:45:54 +00:00
1e72384edb
add missing hunks to recognize the Microsoft MN-700 device ( #6749 )
...
SVN-Revision: 19896
2010-02-28 11:09:50 +00:00
0cde46b3e7
add support for OvisLink WL-1600GL
...
SVN-Revision: 19262
2010-01-21 23:48:23 +00:00
61a1c4d06b
add western digital netcenter support to broadcom-diag ( #6124 ) original patch from Christoph Muellner
...
SVN-Revision: 19008
2010-01-02 16:22:20 +00:00
6ec88dfdfc
add Askey RT210W support (patch from #6380 )
...
SVN-Revision: 18922
2009-12-24 11:00:31 +00:00
46f75ee869
add WRT300N v1.1 support (patch from #6379 )
...
SVN-Revision: 18921
2009-12-24 10:58:09 +00:00
a5f80019ef
bump some revisions and update copyrights
...
SVN-Revision: 17554
2009-09-10 10:07:04 +00:00
8c7c2d9116
Added identification of WRT610N and its button/led definitions.
...
Signed-off-by: Tomas Kopal <Tomas.Kopal@altap.cz>
SVN-Revision: 17434
2009-08-28 15:03:36 +00:00
31fbb89034
add support for the WRT160N, patch from Westley Paynter
...
SVN-Revision: 17031
2009-07-27 13:00:23 +00:00
b63576359d
D-Link DIR-320 support (broadcom-diag)
...
This patch adds D-Link DIR-320 support to broadcom-diag.
"reserved" button is the button on the right side of the router without
any title. I'm not sure if I've selected right name.
Signed-off-by: Leonid Evdokimov <leon@darkk.net.ru>
SVN-Revision: 16443
2009-06-14 09:39:43 +00:00
f3f5cfd4ee
recognize WAP54Gv2 and assigne LED and GPIOs ( #5335 )
...
SVN-Revision: 16434
2009-06-13 15:56:21 +00:00
74f8ea728a
fix detection of motorola wr850g, thanks to Vinicius Fonseca, ( #4710 )
...
SVN-Revision: 16367
2009-06-07 09:28:29 +00:00
34939cad39
get rid of $Id$ - it has never helped us and it has broken too many patches ;)
...
SVN-Revision: 15242
2009-04-17 14:09:46 +00:00
f5fba5bc3c
Asus WL-330gE Support
...
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.
Signed-off-by: David Cooper <dave@kupesoft.com>
SVN-Revision: 14624
2009-02-22 18:45:39 +00:00
3a95badb10
fix broadcom-diag on linux 2.6.28 ( #4633 )
...
SVN-Revision: 14618
2009-02-22 17:12:36 +00:00
c2b878a384
add initial 2.6.28 support for brcm47xx target
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 13909
2009-01-06 22:36:41 +00:00
10f4e46cf9
Add proper LED support to broadcom-diag for the Asus WL-320gE/gP routers ( #4062 )
...
SVN-Revision: 12855
2008-10-04 16:51:03 +00:00
1081dbcb41
broadcom-diag: reset the interrupt mask of configured leds to avoid spurious interrupts
...
SVN-Revision: 12030
2008-07-31 01:33:14 +00:00
9b2e1bdd8d
fix Dell TrueMobile 2300 v1/v2 detection and network configuration ( closes #2788 )
...
SVN-Revision: 11935
2008-07-26 16:10:44 +00:00
c4f83e0b0c
Add support for WRT600N and WRT600N v1.1 ( #3535 )
...
SVN-Revision: 11740
2008-07-07 14:17:02 +00:00
f7e09198fe
(1/6) bcm57xx: init from diag
...
I've been working to finish up the bcm57xx module package nbd
posted a few months ago. I am no expert, just had some spare
time and some motivation. Here is the background:
https://dev.openwrt.org/ticket/2744
This first patch disables the bcm57xx gpio setup in broadcom-diag.
The switch needs to be initialized by the driver so the driver can
then reset the switch ASAP. If the switch isn't reset quickly enough,
it will forward packets between the WAN and LAN, which will cause
problems with modems that only allow one mac to access the internet.
Tested on wrt350n.
Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>
SVN-Revision: 11466
2008-06-15 11:09:27 +00:00
6fab96eb3e
Add Siemens SE505v2 detection to diag ( #3416 )
...
SVN-Revision: 11308
2008-05-31 12:32:05 +00:00
f027ecb2cf
Stopgap compilation fixes for diag and switch under 2.6.25
...
SVN-Revision: 11231
2008-05-20 22:33:45 +00:00
99b6b35be3
Add support for Asus wl-520gc
...
SVN-Revision: 11145
2008-05-16 01:18:57 +00:00
06c7c04288
Fix typo in broadcom-diag LED output enable
...
SVN-Revision: 11125
2008-05-12 19:46:53 +00:00
c15de3860c
Add support for the WL-500gP v2
...
SVN-Revision: 10693
2008-03-31 08:04:56 +00:00
e229b1b849
Add support for the ASUS WL-520gU
...
SVN-Revision: 10692
2008-03-31 08:04:27 +00:00
a6a59ce520
broadcom-diag cleanup
...
SVN-Revision: 10691
2008-03-31 08:04:06 +00:00
faa14263f5
ssb: Make the GPIO API reentrancy safe.
...
SVN-Revision: 10496
2008-02-19 15:22:17 +00:00
Hauke Mehrtens
Jo-Philipp Wich
Felix Fietkau
Imre Kaloz
Gabor Juhos
Claudio Mignanti
Markus Wigge
Nicolas Thill
Florian Fainelli
Andy Boyett
Peter Denison
Michael Büsch