861bf6af49
fix typo inside fritz3370 devicetree file
...
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
54c096527a
more devicetree fixes
...
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
59cc6d9ddd
improve button handling
...
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
7ce4c81647
add phy-reset gpio handling to xrx200-net
...
SVN-Revision: 34822
2012-12-21 13:47:44 +00:00
42d668174e
add more lantiq phy ids based on daniels uboot code
...
SVN-Revision: 34821
2012-12-21 13:47:40 +00:00
16c5946f8b
refresh patch and install v1.1 gphy blobs
...
SVN-Revision: 34820
2012-12-21 13:47:35 +00:00
123343d424
make to rtl8366_smi of binding use gpio_is_valid
...
SVN-Revision: 34816
2012-12-21 13:47:14 +00:00
840d0d246c
kernel: add solos-pci update for 3.3
...
Same patches that I just merged for 3.6 and 3.7, except with one
additional fix that went into v3.4 that needed to be included.
Submitted more for the benefit of the AA branch than for trunk.
[juhosg: refresh the patch with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34813
2012-12-21 10:38:33 +00:00
04ce7e213f
rb532: add support for 3.7
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34812
2012-12-20 19:25:43 +00:00
e1b5eeeaa4
ramips: Add USB support for DAP-1350 platform.
...
It seems to work as intended, but only lightly tested.
Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>
SVN-Revision: 34811
2012-12-20 19:17:17 +00:00
311d921e12
rb532: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34810
2012-12-20 19:09:03 +00:00
befb29c7a3
rb532: switch to 3.6.11
...
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34809
2012-12-20 19:09:01 +00:00
dbcb4708fb
rb532: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34808
2012-12-20 19:09:00 +00:00
5399d00ae6
ppc44x: add support for 3.7
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34807
2012-12-20 18:11:22 +00:00
2d6a41cf5d
kernel: add solos-pci patches from 3.8 for new hardware
...
[juhosg: refresh patches with quilt, skip the patch for 3.3]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34806
2012-12-20 17:14:57 +00:00
d21275a36b
linux: add missing symbols for 3.{6,7}
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34805
2012-12-20 17:14:56 +00:00
a81fa11243
cns21xx: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34801
2012-12-20 14:51:17 +00:00
1d7ba088e6
ppc40x: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34800
2012-12-20 14:51:16 +00:00
708c8c3d0d
ppc40x: add missing NULL terminator to avoid boot panic on PPC40x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34799
2012-12-20 14:37:39 +00:00
e108cb91c0
ar71xx: rename fix-ar933x-reset patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34798
2012-12-20 14:13:16 +00:00
5da1d7daa5
ppc40x/44x: disable SWIOTLB
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34797
2012-12-20 14:09:39 +00:00
1b0aaff246
adds a fix for ar8216 mii detection on etop driver
...
SVN-Revision: 34795
2012-12-19 16:20:24 +00:00
4d4b2d3ced
merge /lib/functions/boot.sh and /lib/functions.sh
...
SVN-Revision: 34794
2012-12-19 16:07:53 +00:00
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
439a869090
Do not overload mount-call - trying to reduce confusion
...
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
687920ba3e
minor basefiles fixes
...
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
e472671bde
fix gptu clocks
...
SVN-Revision: 34789
2012-12-19 15:17:31 +00:00
5495ffbfdf
more board file fixes
...
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
c0515a5a8b
ppc44x: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34787
2012-12-19 09:45:43 +00:00
aedd9433fa
ppc44x: switch to 3.6.11
...
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34786
2012-12-19 09:45:42 +00:00
982d3e3f7a
ppc44x: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34785
2012-12-19 09:45:40 +00:00
5f82aa4d15
ar71xx: merge machine patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34783
2012-12-19 08:50:45 +00:00
cf99770800
ar71xx: build image for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: reorder MR3220 MultiProfile entry]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34782
2012-12-19 08:50:44 +00:00
b1b7aa674e
ar71xx: add user-space support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: add uci-defaults/network support]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34780
2012-12-19 08:50:41 +00:00
0767605d17
ar71xx: add kernel support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg:
- remove custom LED and button arrays
- use separate machine specific patch
- update Kconfig]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34779
2012-12-19 08:50:35 +00:00
4aa8272c8b
fix gptu patch - tapi should now load
...
SVN-Revision: 34777
2012-12-18 20:12:57 +00:00
c62586382a
ppc40x: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34776
2012-12-18 20:10:37 +00:00
7d0cf4f7a0
ppc40x: switch to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34775
2012-12-18 20:10:34 +00:00
565cdf58b5
ppc40x: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34774
2012-12-18 20:10:31 +00:00
2143de1a3d
generic: disable crashlog on ppc
...
It causes panic on boot:
[ 0.194287] __ioremap(): phys addr 0x1f00000 is RAM lr crashlog_init_fs
[ 0.200902] Unable to handle kernel paging request for data at address 0x00000000
[ 0.208347] Faulting instruction address: 0xc026cb10
[ 0.213282] Oops: Kernel access of bad area, sig: 11 [#1 ]
[ 0.218586] PowerPC 40x Platform
[ 0.221783] Modules linked in:
[ 0.224817] NIP: c026cb10 LR: c026cb10 CTR: c000c1b8
[ 0.229745] REGS: c1825ed0 TRAP: 0300 Not tainted (3.6.11)
[ 0.235435] MSR: 00029030 <EE,ME,IR,DR> CR: 42004082 XER: 00000000
[ 0.241745] DEAR: 00000000, ESR: 00000000
[ 0.245724] TASK = c181e000[1] 'swapper' THREAD: c1824000
GPR00: c026cb10 c1825f80 c181e000 00000000 0000004b 0000004b c029a4dd 6f675f69
GPR08: 6e69745f c0290440 00000000 00000000 22004084 00000000 01ffc400 004011f8
GPR16: 00000001 ffffffff 00000000 007fff00 01ff6120
2012-12-18 20:10:02 +00:00
1e8ab43834
generic: add missing symbols for 3.{6,7}
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34772
2012-12-18 20:09:58 +00:00
af48676b28
update to 3.7.1
...
SVN-Revision: 34771
2012-12-18 19:32:01 +00:00
1080f68b2b
etrax: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34768
2012-12-18 17:54:04 +00:00
b86e82e5cc
s3c2442: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34767
2012-12-18 17:54:02 +00:00
db831511d2
goldfish: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34766
2012-12-18 17:53:53 +00:00
979bc5536d
ps3: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34765
2012-12-18 17:53:51 +00:00
6f794eeedb
pxcab: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34764
2012-12-18 17:53:17 +00:00
029553b698
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34763
2012-12-18 15:54:15 +00:00
7ff7340304
geos: add missing config-3.7 file
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34762
2012-12-18 15:51:45 +00:00
149534f3ed
ar71xx: image: add OpenMesh profile
...
It allows to build firmware images for all OpenMesh
products in one step.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34761
2012-12-18 15:16:05 +00:00
8903f8581b
kernel: update linux 3.7 to 3.7.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34760
2012-12-18 15:13:31 +00:00
b2caa5db24
cns21xx: remove broken flag
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34759
2012-12-18 14:51:58 +00:00
39796c434c
cns21xx: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34758
2012-12-18 14:51:58 +00:00
991ebc29d7
cns21xx: switch to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34757
2012-12-18 14:51:57 +00:00
9e1a54296a
cns21xx: fix build errors on 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34756
2012-12-18 14:51:55 +00:00
5a680f1cbf
geos: update to 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34755
2012-12-18 14:50:48 +00:00
9b15d3e22a
kernel: add 3.7 support for x86
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34754
2012-12-18 14:50:47 +00:00
d537f76ddd
kernel: Fix Cisco SIP NAT patch to build with 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34753
2012-12-18 14:50:45 +00:00
0c64d55b14
kernel: add missing config option BATTERY_DS2781 for 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34749
2012-12-18 14:50:41 +00:00
44b9898251
kernel: update linux 3.6 to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
fe8efb72ca
ramips: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34744
2012-12-17 22:28:11 +00:00
fc0da6852e
ar71xx: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34743
2012-12-17 22:28:09 +00:00
1bdea42662
kernel: fix a warning in the O_DIRECT debloat patch
...
SVN-Revision: 34740
2012-12-17 20:55:49 +00:00
2bda7a5b41
kernel: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
...
SVN-Revision: 34737
2012-12-17 15:11:39 +00:00
d153bdbba9
generic: rtl836x: fix compiler warnings
...
CC drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366s.c:16:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366s.c: In function 'rtl8366s_probe':
drivers/net/phy/rtl8366s.c:1094:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366s.c:1055:32: warning: unused variable 'pdata'[-Wunused-variable]
CC drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366rb.c:17:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366rb.c: In function 'rtl8366rb_probe':
drivers/net/phy/rtl8366rb.c:1214:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366rb.c:1175:32: warning: unused variable 'pdata'[-Wunused-variable]
CC drivers/net/phy/rtl8367.o
In file included from drivers/net/phy/rtl8367.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367.c: In function 'rtl8367_probe':
drivers/net/phy/rtl8367.c:1712:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367.c:1677:32: warning: unused variable 'pdata' [-Wunused-variable]
CC drivers/net/phy/rtl8367b.o
In file included from drivers/net/phy/rtl8367b.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367b.c: In function 'rtl8367b_probe':
drivers/net/phy/rtl8367b.c:1494:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367b.c:1459:32: warning: unused variable 'pdata' [-Wunused-variable]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34731
2012-12-17 13:02:18 +00:00
61d715505c
ar71xx: add profile and build image for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34730
2012-12-17 12:28:21 +00:00
abbd18776e
ar71xx: add user-space support for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34728
2012-12-17 12:28:11 +00:00
ff3f28265f
ar71xx: add kernel support for the UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34727
2012-12-17 12:28:02 +00:00
7bcb6b5479
make pinctrl-falcon honour status="disbaled";
...
SVN-Revision: 34714
2012-12-16 10:03:28 +00:00
573cf13419
fix falcon profile
...
SVN-Revision: 34713
2012-12-16 10:03:23 +00:00
33d3433d75
fix i2c-lantiq module
...
SVN-Revision: 34712
2012-12-16 10:03:18 +00:00
b637eb598d
add falcon devicetree files
...
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
8c3306b8b6
kernel: add a missing config symbol for 3.7
...
SVN-Revision: 34710
2012-12-15 22:00:03 +00:00
eba8cccd88
linux: generic: rtl836*: fix compilation with !CONFIG_OF
...
fixes the following errors caused by r34682:
CC [M] drivers/net/phy/rtl8366_smi.o
In file included from drivers/net/phy/rtl8366_smi.c:26:0:
drivers/net/phy/rtl8366_smi.h:149:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.h:149:46: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:65: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe_plat':
drivers/net/phy/rtl8366_smi.c:1400:44: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1402:11: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1403:16: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1415:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c:1415:21: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe':
drivers/net/phy/rtl8366_smi.c:1420:31: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1424:10: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1425:3: warning: passing argument 1 of 'rtl8366_smi_probe_of' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1392:19: note: expected 'struct device_node *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c:1427:3: warning: passing argument 1 of 'rtl8366_smi_probe_plat' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:5: note: expected 'struct platform_device *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1438:1: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
make[7]: *** [drivers/net/phy/rtl8366_smi.o] Error 1
make[6]: *** [drivers/net/phy] Error 2
make[5]: *** [drivers/net] Error 2
make[4]: *** [drivers] Error 2
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34703
2012-12-15 13:32:02 +00:00
3ca51b5399
select hcd as a default package for the dgn3500
...
SVN-Revision: 34702
2012-12-15 11:01:16 +00:00
85e4da7e23
EASY80920 has 2 usb ports
...
SVN-Revision: 34701
2012-12-15 11:01:11 +00:00
3dac521a49
remove 3.3 and 3.6
...
SVN-Revision: 34699
2012-12-15 02:01:08 +00:00
1dece11487
cleanup basefiles
...
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
601bc28669
clean up modules.mk
...
SVN-Revision: 34697
2012-12-15 02:00:55 +00:00
2c33df0376
add devicetrees
...
SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
3a948770cf
add linux-v3.7
...
SVN-Revision: 34687
2012-12-15 01:59:45 +00:00
d8678644f9
make rtl8366 driver OF capable
...
SVN-Revision: 34682
2012-12-15 01:59:08 +00:00
4901ac8225
brcm47xx: improve suppressing printing if a module was found in preinit function.
...
Thank you Bastian Bittorf
SVN-Revision: 34680
2012-12-14 22:45:12 +00:00
57d7df3a35
generic: export include/linux/switch.h on 3.3, 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34678
2012-12-14 12:11:48 +00:00
a860153cce
generic: disintegrate UAPI from include/linux/switch.h
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34677
2012-12-14 12:11:41 +00:00
8aed692309
generic: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34676
2012-12-14 08:47:39 +00:00
272ef8ac00
generic: update pci_disable_usb_common_quirks patch
...
Fixes the following compiler warning:
drivers/usb/host/pci-quirks.c:459:23: warning: 'quirk_usb_handoff_uhci' defined but not used [-Wunused-function]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34675
2012-12-14 08:32:56 +00:00
2e2c88b625
ar71xx: reorder some patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34674
2012-12-14 07:16:56 +00:00
34411a0cbd
ar71xx: merge unifi outdoor patch into the ubnt-xm one
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34673
2012-12-14 07:16:50 +00:00
6c8efbfdc0
brcm47xx: Additional BCM4716 support
...
Additional BCM4716 support. Still needs working ethernet driver.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34672
2012-12-13 18:57:38 +00:00
6672d869da
brcm47xx: BCMA - Broadcom 2011 SDK Updates
...
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34670
2012-12-13 18:54:04 +00:00
97d22306da
brcm47xx: return the real irq number in bcma_core_irq
...
The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34669
2012-12-13 18:51:10 +00:00
6e4082f170
kernel: fix solos-pci skb double-free in DMA mode
...
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34667
2012-12-13 18:39:31 +00:00
321852348f
kernel: fix perf build with uclibc toolchains on x86
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34666
2012-12-13 17:34:22 +00:00
5e7d69554e
kernel/3.6: backport an upstream build for perf with uClibc
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34662
2012-12-13 15:40:27 +00:00
2bb7f82d8a
kernel: fix porting mistakes on the 3.6+ SIP NAT patch causing crashes
...
SVN-Revision: 34657
2012-12-13 13:07:13 +00:00
71712ec522
brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way.
...
SVN-Revision: 34655
2012-12-13 00:12:42 +00:00
5be97468f6
brcm47xx: use kernel 3.6.10 by default now
...
SVN-Revision: 34654
2012-12-13 00:11:55 +00:00
235c065e12
brcm47xx: suppress printing if a module was found in preinit function.
...
SVN-Revision: 34653
2012-12-13 00:11:11 +00:00
3a4a6cfd64
kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
...
SVN-Revision: 34652
2012-12-13 00:09:55 +00:00
1bd8db0bd6
kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing
...
SVN-Revision: 34651
2012-12-12 22:42:18 +00:00
d085aad288
ar71xx: add profile and build initramfs image for the WNDR4300
...
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
dcdfcb75f0
ar71xx: add user-space support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34649
2012-12-12 16:49:51 +00:00
bc82db7d78
ar71xx: add kernel support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
75b71f4a74
ar71xx: add ap91_pci_init_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
d7cebac243
ar71xx: add ath79_wmac_register_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34645
2012-12-12 16:49:47 +00:00
ec26814b0e
ar71xx: refresh 3.3 patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34644
2012-12-12 16:49:46 +00:00
cdfc300948
ar71xx: remove superfluous USB patches for 3.3
...
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
eece71be56
generic: fix 8139cp patch for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34640
2012-12-12 08:37:27 +00:00
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
ed15c452a1
kernel: update to 3.7 final
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34626
2012-12-11 11:31:17 +00:00
aa2dc106c6
switch to 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34623
2012-12-10 21:06:10 +00:00
ff6116cbdf
add 3.6 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34622
2012-12-10 21:06:05 +00:00
17c76e5ca8
add sound feature
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34621
2012-12-10 21:05:48 +00:00
cbfca35c76
generic: backport a fix for the input keymap-matrix module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34620
2012-12-10 21:05:42 +00:00
87c8808ca5
keyboard driver depends on input-matrixkmap for 3.6+
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34619
2012-12-10 21:05:36 +00:00
5c28c5255f
generic: backport an upstream fix for building snd-soc-pcm as a module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34617
2012-12-10 21:05:27 +00:00
f016b935d3
also list kmod-sound-core in the default packages
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34615
2012-12-10 21:05:11 +00:00
dfd718d13d
mac80211: ath9k: allow to load EEPROM data via firmware API
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34606
2012-12-10 15:46:15 +00:00
374a72411a
generic/kernel: add a fix for a common MIPS build failure.
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34602
2012-12-10 15:04:10 +00:00
c1c6a23f13
kernel/generic: refresh 3.7 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34601
2012-12-10 15:03:55 +00:00
0f90806014
kernel/generic: port r34599 over 3.7 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34600
2012-12-10 15:03:51 +00:00
67e85c0018
kernel/generic: fix build failure on missing uhci symbol
...
linux-3.6.8/drivers/usb/host/pci-quirks.c:471: undefined reference to
`uhci_check_and_reset_hc'
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34599
2012-12-10 14:24:28 +00:00
c2ae0ec02a
add support for Hauppauge Broadway
...
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform. It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
SVN-Revision: 34595
2012-12-10 14:13:01 +00:00
3cbc1a49e2
ar71xx: load ar934x_nfc driver earlier
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34589
2012-12-10 10:38:11 +00:00
1f7ae58a2c
ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
47f9b2a110
ar71xx: TP-LINK also has a family TL-WDR
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34577
2012-12-07 19:10:57 +00:00
d7ba2b4840
ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
...
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
deeeb5f671
create Linksys WRTU54G-TM profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34572
2012-12-07 18:02:31 +00:00
33f6c5ddb9
kernel: add missing USB configuration symbols after r34501
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34568
2012-12-07 11:01:53 +00:00
8236584b13
rename interrupt number constants
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34566
2012-12-06 22:41:14 +00:00
f1e4da0389
remove the now deprecated /proc/adm8668 interface
...
Proper gpiolib support is hooked instead.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34565
2012-12-06 22:41:09 +00:00
849662a8ec
add a gpiolib driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34564
2012-12-06 22:41:04 +00:00
78b235cfc3
do not reset WAN and LAN blocks
...
This is taken care of by the tulip driver accordingly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34563
2012-12-06 22:40:58 +00:00
b3f36553cc
enable and advertise USB support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34562
2012-12-06 22:40:54 +00:00
a5aed4ec3a
add support for on-board EHCI controller
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34561
2012-12-06 22:40:49 +00:00
88f6bf64cf
remove the "old" tulip forked driver
...
We can now use the mainline tulip driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34559
2012-12-06 22:40:40 +00:00
40ab1facd2
use the tulip platform driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34558
2012-12-06 22:40:36 +00:00
445e77fdb5
patch the tulip driver to accept a platform variant
...
Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI
CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34557
2012-12-06 22:40:31 +00:00
b1f1381c27
move clock frequencies into clock driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34556
2012-12-06 22:40:26 +00:00
60663b12b2
add CONFIG_GPIO_PL061 config symbol
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34555
2012-12-06 22:40:21 +00:00
1232f91efb
replace the custom mtd driver with a partition parser
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34554
2012-12-06 22:40:17 +00:00
b516c8d89d
cleanup PCI controller code
...
At some point we should make the ADM5120 PCI controller driver a real
platform driver and share that one between the two targets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34553
2012-12-06 22:40:12 +00:00
1ed763b888
cleanup and make interrupt code more robust
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34552
2012-12-06 22:40:02 +00:00
47ccbaaa91
remove frequency from /proc/cpuinfo
...
This is not the place to expose it and duplicates code reading the
system frequency.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34551
2012-12-06 22:39:57 +00:00
e37f6fb458
provide a system clock to be used by the MIPS timer
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34550
2012-12-06 22:39:52 +00:00
79c2ce01b7
get rid of the UART defines
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34549
2012-12-06 22:39:47 +00:00
afc2b07be1
get rid of the specific UART driver and use AMBA PL010
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34548
2012-12-06 22:39:43 +00:00
2dee2133c5
implement early_printk without an early_console
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34547
2012-12-06 22:39:33 +00:00
f85115efd8
simplify IRQ controller code
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34546
2012-12-06 22:39:27 +00:00
50303d52e2
use platform_add_devices
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34545
2012-12-06 22:39:22 +00:00
192c1e90bc
move time related functions to their own file
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34544
2012-12-06 22:39:18 +00:00
1f939889ca
move setup-related functions to their own file
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34543
2012-12-06 22:39:08 +00:00
abc03de599
kernel: add missing config symbols
...
SVN-Revision: 34532
2012-12-06 14:11:16 +00:00
a3843e7ec7
kernel 3.6+: nuke obsolete patches that are messing up oprofile builds
...
SVN-Revision: 34506
2012-12-05 16:49:48 +00:00
512baafc6b
kernel/3.3: move OHCI and EHCI platform drivers to generic
...
These patches are not specific to bcm47xx and will be used on other
platforms as well.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34501
2012-12-05 14:18:05 +00:00
822ee5053e
cns3xxx: fix dwc_otg driver compat with udc-core
...
function. This removes those from the dwc_otg driver and removes the patch
that comments out the linkage of udc-core so that the dwc_otg driver can
co-exist happily with other USB Device Controllers.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34475
2012-12-04 16:19:18 +00:00
fd0729f35c
cns3xxx: advertise pcie usb usbgadget features
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34474
2012-12-04 16:19:12 +00:00
d9d0814fc2
Fix Comtrend AR-5381u Power LED
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
d3cda51994
do no longer rename amba-pl010 serial devices names
...
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34469
2012-12-03 16:18:40 +00:00
a7220cd9f8
kernel: disable more pci quirks to save space on platforms that don't need them
...
SVN-Revision: 34467
2012-12-03 10:33:47 +00:00
ec885796c0
kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips
...
SVN-Revision: 34461
2012-12-02 18:37:41 +00:00
24b31c9428
kernel: fix stripping symbol exports
...
SVN-Revision: 34458
2012-12-02 17:42:17 +00:00
2ac9ac5163
brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
...
SVN-Revision: 34454
2012-12-02 16:11:39 +00:00
38d3b8d0ea
kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements
...
SVN-Revision: 34449
2012-12-02 15:26:19 +00:00
e0e43655ce
ramips: fix serial console for Belkin F5D8235 v1/v2
...
Based on a patch from #12533 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
890f83dfb3
Update linux-atm fixes to reflect the final upstream pull request
...
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34443
2012-12-02 13:04:04 +00:00
527afd0e9a
remove target
...
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34430
2012-11-30 10:53:47 +00:00
c830644d97
remove Linux 3.3 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34426
2012-11-29 21:43:02 +00:00
763f780553
use a default kernel command-line to mount squashfs and jffs2
...
This fixes bug #9055 .
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34424
2012-11-29 21:42:53 +00:00
7cde0281f4
kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL
...
Patches queued upstream in net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34415
2012-11-29 17:58:28 +00:00
4f5defdc3b
ar71xx: switch to 3.6.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
ea17e36482
kernel: Update Geos to 3.6.8
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34411
2012-11-29 17:37:19 +00:00
543c2c27d1
kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)
...
Patches about to go into net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34410
2012-11-29 17:37:18 +00:00
df6727639a
kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34409
2012-11-29 17:37:16 +00:00
44131bd785
ramips: rt305x: add profile and build image for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
d3994b7408
ramips: rt305x: add user-space support for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
0ec59e6235
ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
...
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.
* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c
[juhosg: move user-space support and image generation into separate
patches]
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
ee16e144bb
use physmap-flash part_probe_types
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34398
2012-11-27 18:42:49 +00:00
0588d13a3e
Fix typo in 96338GW power LED.
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
dd852e242d
add AudioCodes AC495 SoC
...
Found in the AudioCodes Tulip AC494 ATA.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34395
2012-11-27 18:42:39 +00:00
d59ba20030
do not call clk_put() on the timer clock
...
We don't support disabling the clock, but this is actually what it would do.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34394
2012-11-27 18:42:36 +00:00
5d6208f34d
do not list specific board compatible strings
...
The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34393
2012-11-27 18:42:32 +00:00
94b7be6dd7
remove unused variables from Makefile.boot
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34392
2012-11-27 18:42:28 +00:00
efd00e6240
brcm47xx: fix title of Bcm4705-wl profile
...
SVN-Revision: 34378
2012-11-25 16:41:00 +00:00
a3d976aff5
brcm47xx: add profile for bcm4705 with wl driver
...
SVN-Revision: 34336
2012-11-25 16:15:27 +00:00
57b7879a4e
ramips: ramips_eth: use Kconfig definition to enable debug
...
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34332
2012-11-25 14:25:54 +00:00
21d5df8700
ramips: add DIR-615 D userspace support
...
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.
An IRC user reported these changes allowed him to use wifi on his hardware.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
608efcdbd0
kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of the target configs.
...
SVN-Revision: 34330
2012-11-25 14:14:17 +00:00
aa8e887a46
brcm47xx: whitespace cleanups
...
SVN-Revision: 34329
2012-11-25 14:03:51 +00:00
be77f9951c
brcm47xx: fix cpu clock detection on ASUS WL-520gU
...
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.
This fixes #4083 .
SVN-Revision: 34325
2012-11-24 20:28:06 +00:00
264873b3c5
brcm47xx: watchdog: deactivate NOWAYOUT.
...
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.
This will fix #11724 .
SVN-Revision: 34324
2012-11-24 20:24:27 +00:00
c62d86ecb8
brcm47xx: update watchdog driver
...
This watchdog driver should work with SoC having a PMU.
This fixes #11720 .
SVN-Revision: 34323
2012-11-24 20:07:25 +00:00
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
746b4cec06
bcm63xx: Enable LED pin support for ath9k pci fixup.
...
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
1baeede939
bcm63xx: fix spi transfer handling
...
* Accept transfers without bits_per_word set.
* Work around the inability of the hardware of keeping CS asserted.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
b0b994cf76
ar71xx: set pad6 cfg for AR8327 on the AP136 board
...
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
49d4b5581d
generic: ar8216: set delay values for SGMII mode on AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34315
2012-11-23 20:55:26 +00:00
3205b52d1c
generic: ar8216: introduce ar8216_mib_op helper
...
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.
This change also fixes a lockdep warning in
ar8216_mib_flush.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34297
2012-11-22 10:33:03 +00:00
10d30f2d2d
swconfig: make it compatible with 3.7
...
swconfig does not compile with 3.7 because
struct netlink_notify->pid has been renamed to
struct netlink_notify->portid
and
struct genl_info->snd_pid has been renamed to
struct genl_info->snd_portid
Use the new names and add compatibility patches
to 3.3 and 3.6.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34288
2012-11-21 17:38:11 +00:00
f7ead0a2d5
adds proper package selection for dgn3500
...
SVN-Revision: 34286
2012-11-21 06:06:48 +00:00
e20a0baa04
cns21xx: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34285
2012-11-20 21:37:53 +00:00
5c740aa23c
generic: add some missing symbols for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34284
2012-11-20 21:34:43 +00:00
2a792f32b5
generic: ar8216: fix port number check in 'ar8xxx_mib_work_func'
...
Also add a WARN_ON to 'ar8216_mib_fetch_port_stat'
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34283
2012-11-20 20:40:04 +00:00
258b2f2dc2
generic: ar8216: remove an unblanced mutex_unlock call
...
Fixes the following warning:
[ 94.080000]
[ 94.080000] =====================================
[ 94.080000] [ BUG: bad unlock balance detected! ]
[ 94.080000] 3.3.8 #2 Tainted: G O
[ 94.080000] -------------------------------------
[ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at:
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] but there are no more locks to release!
[ 94.080000]
[ 94.080000] other info that might help us debug this:
[ 94.080000] 2 locks held by swconfig/1220:
[ 94.080000] #0 : (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34
[ 94.080000] #1 : (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4
[ 94.080000]
[ 94.080000] stack backtrace:
[ 94.080000] Call Trace:
[ 94.080000] [<8028dc58>] dump_stack+0x8/0x34
[ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc
[ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8
[ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394
[ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214
[ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8
[ 94.080000] [<80222440>] genl_rcv+0x24/0x34
[ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c
[ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0
[ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c
[ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270
[ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c
[ 94.080000] [<8006ad78>] stack_done+0x20/0x40
[ 94.080000]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34282
2012-11-20 20:40:03 +00:00
82b57b0c28
generic: ar8216: add missing locking calls
...
Fixes the following lockdep warning:
[ 19.160000] ------------[ cut here ]------------
[ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4()
[ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd
sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip
ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp
x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at
h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7
crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry
pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[ 19.210000] Call Trace:
[ 19.220000] [<8028dc38>] dump_stack+0x8/0x34
[ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4
[ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24
[ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4
[ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0
[ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98
[ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460
[ 19.250000] [<8008a630>] worker_thread+0x22c/0x334
[ 19.260000] [<8008e544>] kthread+0x88/0x90
[ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18
[ 19.270000]
[ 19.270000] ---[ end trace 22e9d696adfa6a08 ]---
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34281
2012-11-20 20:40:00 +00:00
c0f73ac607
generic: convert yaffs to use kuid_t and kgid_t on 3.6+
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34280
2012-11-20 17:45:24 +00:00
188908e885
ar71xx: make rb750_nand driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
8194237789
ar71xx: make ar934x_nfc driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
4468fd7ae4
ar71xx: refresh rb4xx_nand patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
46a3b818b9
ar71xx: remove buffer verification reference from rb4xx_nand.c
...
It is a dead code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34276
2012-11-20 14:40:22 +00:00
674b91ce0e
ar71xx: fix GPIO function selection for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
d833ca527d
ar71xx: restore rb4xx kernel partition size to the original value
...
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
33a99ce46b
ar71xx: install lzma compressed elf kernel image from wget2nand
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
68b5aa2fdf
ar71xx/image: provide lzma compressed elf kernel image
...
This will be used on the RB4xx/RB7xx/RB2011 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
97867f8717
ar71xx/image: relink loader.elf image to LOADADDR
...
This allows to load the resulting image directly
from RouterBOOT.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
dd092fd10c
ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
6c1fbb2d5c
mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
...
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
8e4cefc7f8
refresh all kernel configurations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
8dc72c5c4d
Revert "target specific patches have nothing to do in generic.."
...
This reverts commit r34230, as it is causing build failures:
make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1
Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.
SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
4c043300fc
fix 820-usb_add_usb_find_device_by_name.patch
...
SVN-Revision: 34254
2012-11-19 10:56:09 +00:00
4fa5781a95
kernel: refresh patches
...
SVN-Revision: 34253
2012-11-18 21:40:30 +00:00
86cc79ac98
brcm47xx: add support for kernel 3.6
...
This is based on the patch by Peter Wagner.
SVN-Revision: 34252
2012-11-18 21:27:00 +00:00
db763080f4
kernel: add missing generic config options for 3.6+
...
SVN-Revision: 34250
2012-11-18 20:54:53 +00:00
c159c7a462
kernel: add CONFIG_XZ_DEC=y to generic
...
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.
SVN-Revision: 34249
2012-11-18 20:48:53 +00:00
d577d69838
ar71xx: use custom LZMA dictionary size for WNDR3700 images
...
Based on a patch by Hannu Nyman.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
935ca3f3eb
add 3.7-rc6 support (patch 820 still has to be fixed)
...
SVN-Revision: 34247
2012-11-18 18:52:38 +00:00
863657d040
generic: ar8216: add MIB counter support for the AR8216 switch as well
...
Thanks to Jonas Gorski for the reference URL.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34245
2012-11-18 16:21:00 +00:00
98f30aac8e
generic: ar8216: rename AR8216_*_STATS_* defines
...
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.
Thanks to Jonas Gorski for the report.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34244
2012-11-18 16:20:56 +00:00
9abd8cd004
generic ar8216: allow to read/reset MIB counters via swconfig
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34243
2012-11-18 12:26:35 +00:00
4b17323b51
generic: ar8216: use dynamically allocated private data in ar8216_probe
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34242
2012-11-18 12:26:34 +00:00
169e596268
ar71xx: add user-space support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
d44d954dec
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
d62bddc620
ar71xx: update PCI IRQ map for RB4xx devices
...
Should fix #12269 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
31881357af
ar71xx: create profile and build image for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
9da2c85b67
ar71xx: enable sysupgrade for the OpenMesh MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
6380301d01
ar71xx: rename om2p.sh upgrade script to openmesh.sh
...
It will be used on other boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
d325e622d2
scripts/om-fwupgradecfg-gen.sh: add support for the MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
c3174179b7
ar71xx: add user-space support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
8d4857d677
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
b220071cd2
target specific patches have nothing to do in generic..
...
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
c90128ce31
generic: remove temporary config file introduced in r34227
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34229
2012-11-18 08:51:56 +00:00
ff1e854511
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
a4c205011b
move patches to patches-2.6.36
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34220
2012-11-16 16:32:55 +00:00
974b9f5c9a
remove broken flag
...
The SPARC qemu target works like a charm with the following qemu command-line:
qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34219
2012-11-16 16:32:52 +00:00
5261a171e9
update to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34218
2012-11-16 16:32:49 +00:00
John Crispin
Gabor Juhos
Mirko Vogt
Felix Fietkau
Jonas Gorski
Hauke Mehrtens
Florian Fainelli
Imre Kaloz