Florian Fainelli
798cc28d73
build a Devolo dLAN USB Extender specific image
...
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.
SVN-Revision: 33066
2012-08-08 21:51:00 +00:00
Florian Fainelli
f8386ecbc6
cleanup image generation
...
SVN-Revision: 33065
2012-08-08 21:50:55 +00:00
Felix Fietkau
17e6de20d0
ath9k: fix handling of decryption errors, should improve link stability
...
SVN-Revision: 33063
2012-08-08 18:23:04 +00:00
Felix Fietkau
9f73d47912
ath5k: revert a buggy tx power related patch
...
SVN-Revision: 33062
2012-08-08 18:23:00 +00:00
Florian Fainelli
31e46b4293
base-files: check for ldd presence and executability ( #11991 )
...
SVN-Revision: 33057
2012-08-08 15:37:34 +00:00
Felix Fietkau
4d39f3f405
ath9k: fix hang issues on hw reset caused by interrupt storms
...
SVN-Revision: 33055
2012-08-08 12:56:44 +00:00
John Crispin
64b385dda7
pci gpio mapping
...
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 33054
2012-08-08 12:14:43 +00:00
Jo-Philipp Wich
55c322dc68
hostapd: fix ap/sta regression which got accidentally introduced by r32829 ( #11914 )
...
SVN-Revision: 33053
2012-08-08 11:13:12 +00:00
Florian Fainelli
5d37f15006
busybox: support V=c toplevel verboseness flag ( #11799 )
...
Signed-off-by: Gregory M. Turner <gmt@malth.us>
SVN-Revision: 33035
2012-08-07 16:08:11 +00:00
Florian Fainelli
105c0d3fa4
w1-gpio-custom: set enable_external_pullup to null ( #8952 )
...
SVN-Revision: 33034
2012-08-07 16:08:08 +00:00
Felix Fietkau
143ef2c8ff
ath9k: completely disable the MIB interrupt from the interrupt mask register to prevent potential interrupt storms
...
SVN-Revision: 33032
2012-08-07 09:36:24 +00:00
Felix Fietkau
a55de42c7d
ath9k: extend and enable PA predistortion
...
SVN-Revision: 33031
2012-08-06 22:11:30 +00:00
Felix Fietkau
74c27a1a92
mac80211: do not delete linux/*_platform.h, they are touched by patches. instead make the build fail if they differ from the ones in the kernel tree to prevent subtle runtime issues (see #11981 )
...
SVN-Revision: 33030
2012-08-06 20:18:07 +00:00
John Crispin
54f30d4f46
fixes tapi dependencies
...
SVN-Revision: 33029
2012-08-06 18:56:38 +00:00
John Crispin
12c6df34cd
fixes package description
...
SVN-Revision: 33028
2012-08-06 18:54:36 +00:00
Felix Fietkau
0796df61af
ath5k: add various pending tx power fixes, vastly improves stability and performance with various cards
...
SVN-Revision: 33014
2012-08-06 15:33:24 +00:00
Hauke Mehrtens
19a8508046
mac80211: remove header files used to share struct with platform code.
...
The structs defined in these header files should be the same as the
structes used by the platform code otherwise it will cause strange
runtime errors. By removing them from compat-wireless we will get a
compile error instead of a runtime error if they are out of sync.
SVN-Revision: 33006
2012-08-05 23:43:36 +00:00
Jonas Gorski
4feeda756e
bcm63xx: fix USB base registers and IRQs for BCM6328
...
SVN-Revision: 33005
2012-08-05 23:18:22 +00:00
Hauke Mehrtens
a0fb060211
update tg3 driver
...
SVN-Revision: 33004
2012-08-05 20:27:40 +00:00
Hauke Mehrtens
35661401da
generate image for Linksys e3200
...
SVN-Revision: 33003
2012-08-05 13:14:00 +00:00
Hauke Mehrtens
40f139b53b
switch: clean up robo switch driver
...
* remove use_et, all supported drivers are using mii ioctls
* remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
* remove support for old kernel versions
* do_ioctl is allways called with buff == NULL
* use if_mii
SVN-Revision: 33002
2012-08-05 13:10:43 +00:00
Hauke Mehrtens
a71f347c30
brcm47xx: update gpio patch
...
SVN-Revision: 33001
2012-08-05 12:40:05 +00:00
Hauke Mehrtens
1d40a652ee
brcm47xx: fix patch which moves the flash struct in wgt634u code
...
SVN-Revision: 33000
2012-08-05 12:39:15 +00:00
John Crispin
1ae8b7c433
fix xen pci module, partially fixes #11970
...
SVN-Revision: 32996
2012-08-05 08:16:50 +00:00
John Crispin
5f438c3565
W502V/ARV4525 wireless mac bugfix
...
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 32993
2012-08-04 20:14:52 +00:00
Hauke Mehrtens
0758996824
brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
...
SVN-Revision: 32992
2012-08-04 19:46:25 +00:00
John Crispin
3942aebedc
gspca-sn9c20x.ko was not insmod'ed due to typo
...
fixes #11973
SVN-Revision: 32991
2012-08-04 19:17:49 +00:00
John Crispin
23f6ec6ef6
wrt55agv2-spidevs needs <linux/modules.h>
...
SVN-Revision: 32956
2012-08-03 09:38:24 +00:00
John Crispin
060b161ca6
cleanup patches
...
SVN-Revision: 32953
2012-08-03 08:53:02 +00:00
Florian Fainelli
162e272b4b
nuport-mac: properly protect the phy interrupt handler
...
SVN-Revision: 32951
2012-08-02 18:13:17 +00:00
John Crispin
f45132d1d4
Codel: avoid a nul rec_inv_sqrt
...
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.
codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.
Brought over from 3.5-stable
Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>
SVN-Revision: 32950
2012-08-02 13:39:50 +00:00
John Crispin
c2d3274ffc
fixes i2c clock enable
...
SVN-Revision: 32949
2012-08-02 13:29:49 +00:00
Gabor Juhos
e320a7e649
ar71xx: simplify misc IRQ handling
...
SVN-Revision: 32948
2012-08-02 11:25:49 +00:00
Gabor Juhos
3e1e52a524
ar71xx: fix AR934X_EHCI_SIZE
...
SVN-Revision: 32947
2012-08-02 11:25:46 +00:00
Gabor Juhos
b873051706
ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
...
SVN-Revision: 32946
2012-08-02 09:54:41 +00:00
Gabor Juhos
e29d6bec6f
ar71xx: image: allow to use board specific code in the lzma-loader
...
SVN-Revision: 32945
2012-08-02 09:54:33 +00:00
Gabor Juhos
79a8660d67
ar71xx: init switch hw_reset on the TL-WR1043ND board
...
SVN-Revision: 32944
2012-08-02 09:54:28 +00:00
Gabor Juhos
e2782eae8e
generic: rtl836x: add hw_reset field to struct rtl8366_smi
...
It will be used to start/stop the switch if that is
supported by the given board.
SVN-Revision: 32943
2012-08-02 09:54:21 +00:00
Gabor Juhos
614ca3cc9e
generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls
...
SVN-Revision: 32942
2012-08-02 09:54:13 +00:00
Florian Fainelli
9f011e7225
add missing netmask to the network config
...
SVN-Revision: 32941
2012-08-01 22:09:13 +00:00
Florian Fainelli
5133a44785
assume the link is up and full-duplex by default
...
SVN-Revision: 32940
2012-08-01 21:56:54 +00:00
Florian Fainelli
56aac45139
add a default and suitable network config file
...
SVN-Revision: 32939
2012-08-01 21:56:49 +00:00
Gabor Juhos
563400ef10
ar71xx: ew-dorin: added router firmware generation
...
[juhosg: remove dead code]
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b
ar71xx: ew-dorin: added USB support
...
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
SVN-Revision: 32933
2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660
ar71xx: Buffalo WLAE-AG300N wireless led patch
...
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32932
2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619
ar71xx: Buffalo WLAE-AG300N initial support
...
The patch set for Buffalo WLAE-AG300N initial support.
There is another patch for wireless led support that
is posted separately.
Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.
[juhosg: fix coding style]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32931
2012-08-01 12:24:52 +00:00
Florian Fainelli
df48d71d72
resync defconfig enable XZ compression
...
SVN-Revision: 32930
2012-08-01 12:01:27 +00:00
Florian Fainelli
83907c10ed
uclibc++: update to 0.2.4
...
SVN-Revision: 32929
2012-08-01 12:01:24 +00:00
Florian Fainelli
5df254664f
uclibc++: stage g++-uc wrappers in $(TOOLCHAIN_DIR)
...
Since we are overriding TARGET_CXX with the g++-uc wrapper when
we use cmake it expects to find g++-uc in the TOOLCHAIN_DIR.
SVN-Revision: 32928
2012-08-01 12:01:18 +00:00
Florian Fainelli
3cd753408d
properly generate squashfs, jffs2 and initramfs images and kernels
...
SVN-Revision: 32927
2012-07-31 23:09:50 +00:00