Commit Graph

1045 Commits (6998b8a054a48a598cf961c785f311c6f71408cd)

Author SHA1 Message Date
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Jonas Gorski 4bb7b2186e brcm63xx: fix failsafe lan and status led for DSL-274xB rev. F1
Add it to the appropriate places so the power led properly works
and ethernet is properly configured for failsafe.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45709
2015-05-21 19:32:00 +00:00
Jonas Gorski 509c3211d6 brcm63xx: Add Huawei HG655b support
This patch adds support for the Huawei HG655b.

Nothing much special in this router, it's just another BCM6368 with
a Ralink RT3062 wifi chip and the calibration data embedded in the
main flash chip at offset 0x7c0000. There is also configuration data
used by the OEM firmware before the cal_data partition, this area is
protected by the board_data partition in this patch.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45708
2015-05-21 19:31:54 +00:00
Jonas Gorski 9feb1361c4 brcm63xx: fix bcm6348 ext irqc compatible name
This was a remnant of an old version.

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45583
2015-04-27 11:06:05 +00:00
Jonas Gorski 5e7f4ab632 brcm63xx: fix bcm3368.dtsi typo.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45582
2015-04-27 11:06:00 +00:00
Jonas Gorski 16127b3429 brcm63xx: fix leds bcm963269bhr
Fix the led naming and gpios.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45558
2015-04-21 17:00:39 +00:00
Jonas Gorski 5e8eedb897 brcm63xx: add missing bcm96329bhr profile and dts
Hopefully the last missing board.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45557
2015-04-21 16:43:46 +00:00
Jonas Gorski 681eb8c3de brcm63xx: fix bcm63268 rgmii port rgmii configuration
This should rather be done by passing appropriate platform_data/OF, but
should suffice for now.

Fixes e.g. GbE ports on BCM963268BU_P300.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45505
2015-04-19 11:38:42 +00:00
Jonas Gorski 440124dcbb brcm63xx: allow using all four rgmii ports on bcm6316x
At least the third rgmii port is available on 63169, so assume all are
available. Simplifies cpu vs. variant handling.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45504
2015-04-19 11:38:24 +00:00
Jonas Gorski c1ea714d43 brcm63xx: BCM963268BU_P300 reference board fixes
- Fix profile name.
- Rremove whitespace on board patch.
- Refresh patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45499
2015-04-18 22:33:50 +00:00
Jonas Gorski 6232e845da brcm63xx: fix bcm96318ref_p300 profile name
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45486
2015-04-18 09:34:17 +00:00
Felix Fietkau e8126cbfbd kernel: remove kernel module checks/dependencies for 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45377
2015-04-11 10:43:46 +00:00
Jonas Gorski a709beb4ae brcm63xx: fix zyxel kernel name
Accidentally left over development artifact.

Reported-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45179
2015-03-31 09:54:15 +00:00
Jonas Gorski a54b8303d2 brcm63xx: don't build non-dtb kernels anymore
Now that all supported boards have an dts there is no need for a
dtb free kernel anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45169
2015-03-30 20:21:24 +00:00
Jonas Gorski 0f08442ded brcm63xx: move DSL-275XB to DT
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45168
2015-03-30 20:21:15 +00:00
Jonas Gorski f77b446051 brcm63xx: move bcm6318 reference boards to DT
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45167
2015-03-30 20:21:07 +00:00
Jonas Gorski f644c1581a brcm63xx: move VG50 to DT
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45166
2015-03-30 20:21:01 +00:00
Jonas Gorski f973580488 brcm63xx: move V2110 to DT
Also readd image generation which was accidentally dropped in r43364.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45165
2015-03-30 20:20:49 +00:00
Jonas Gorski d8ba40cfcd brcm63xx: use relocate to move the kernel back to start of ram
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327).

Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45164
2015-03-30 20:20:15 +00:00
Felix Fietkau 693e5aae41 brcm63xx: remove linux 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45089
2015-03-28 13:21:09 +00:00
Jonas Gorski 8ffc831bef brcm63xx: use a lookup for bcmcia's ready gpio
Should fix pcmcia on BCM6348 and BCM6358 after switching to DT-probed
gpio controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44995
2015-03-25 15:37:38 +00:00
Jonas Gorski 1e07f8c7ff brcm63xx: fix bcm96328avng board name
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44994
2015-03-25 15:36:26 +00:00
Jonas Gorski 4dc169f9a2 brcm63xx: fix bt v2500v dts based detection
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44993
2015-03-25 15:36:15 +00:00
Jonas Gorski 10cdfd04e6 brcm63xx: move RTA770(B)W to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44992
2015-03-25 15:36:12 +00:00
Jonas Gorski 0e4c1ba284 brcm63xx: move MAGIC to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44991
2015-03-25 15:36:05 +00:00
Jonas Gorski 582dfc52f5 brcm63xx: move CPVA502+ to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44990
2015-03-25 15:35:57 +00:00
Jonas Gorski 46b4d4d1d5 brcm63xx: move dg834g v4 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44989
2015-03-25 15:35:43 +00:00
Jonas Gorski 30a579c674 brcm63xx: move dsl-2640u to dts
Also build image again(?).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44988
2015-03-25 15:35:37 +00:00
Jonas Gorski 16ea19053a brcm63xx: move bcm963268bu_p300 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44987
2015-03-25 15:35:24 +00:00
Jonas Gorski ad218d3033 brcm63xx: fix compilation on 3.14
Fixes the following issue:

drivers/gpio/gpio-bcm63xx.c: In function 'bcm63xx_gpio_probe':
drivers/gpio/gpio-bcm63xx.c:80:4: error: implicit declaration of function 'devm_kasprintf' [-Werror=implicit-function-declaration]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44986
2015-03-25 15:35:15 +00:00
Jonas Gorski 2d3371cd0f brcm63xx: Add BT Home Hub 2A support.
Support for the BT HomeHub 2.0 Type A.

This router was manufactured by Thomson, and it's BCM6358 based.
The leds are controled by two chained HC594, all working ok. The BCM5325
switch has the RESET# pin wired to the GPIO15, but currently there is no
way to tell the b53 driver how to get this gpio number in brcm63xx,
therefore swconfig won't use it when performing a switch reset.

The patch was tested with several firmwares, and all except unsupported
stuff (i.e xDSL) works pretty well.

Tested-by: Tahir <tahir00ali@gmail.com>
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 44985
2015-03-25 15:35:12 +00:00
Jonas Gorski 065d6e9047 brcm63xx: move kernel load address to 8MiB
Fixes boot when uncompressed kernel is > 4 MiB (#19251).

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44984
2015-03-25 15:34:59 +00:00
Jonas Gorski ee0140a678 brcm63xx: hcsimage: respect load address
Respect the vmlinux load address when generating images.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44983
2015-03-25 15:34:45 +00:00
Jonas Gorski d84fafb9f3 brcm63xx: add Livebox 1 firmware image generation
Currently there isn't images ready for flashing liveboxes boards. This
patch adds a script and the code to call it in the  bcm63xx images
builder makefile to generate the livebox 1 firmware.

I removed some lines to avoid generating unneded files in the bin/ dir
for this board. And added code to generate a squashed rootfs aligned to
64 kB since the current one in the /bin dir is 128 kB aligned and
doesn't work. Still no sysupgrade support for this board. Upgrading from
within openwrt can be done writing with mtd the kernel, and then the 64k
aligned rootfs.

Regards

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: use sed instead of a separate shell script for the boot script, make it
 respect the load address]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44982
2015-03-25 15:34:40 +00:00
Jonas Gorski 77e3d442b0 brcm63xx: add a dummy image recipe for boards missing proper images
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44981
2015-03-25 15:34:26 +00:00
Jonas Gorski 02d68c2b57 brcm63xx: drop non-dtb image recipe
All images generated contain dtbs, so it is now unused.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44980
2015-03-25 15:34:23 +00:00
Florian Fainelli 1488ed7c2c brcm63xx: switch maintainer
Make Jonas the maintainer of brcm63xx.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 44848
2015-03-16 19:51:17 +00:00
Jonas Gorski 343ec8d645 brcm63xx: use consistent gpio chip labeling for OF/non-OF
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44846
2015-03-16 13:37:38 +00:00
Jonas Gorski 81e51681e7 brcm63xx: switch to 3.18
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44841
2015-03-16 11:53:22 +00:00
Jonas Gorski 5d0e2d1b41 brcm63xx: call brcm63xx_detect explicitly
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44840
2015-03-16 11:53:14 +00:00
Jonas Gorski 020e5733f9 brcm63xx: move preinit ifname detection to the preinit script
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44839
2015-03-16 11:53:06 +00:00
Jonas Gorski 90da308e3b brcm63xx: remove obsolete brcm63xx_has_reset_button
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44838
2015-03-16 11:52:57 +00:00
Jonas Gorski f0badcb769 brcm63xx: set status leds from within diag.sh
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44837
2015-03-16 11:52:49 +00:00
Jonas Gorski 098377af25 brcm63xx: switch to board_name based configuration
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
Jonas Gorski 52ffc6faa7 brcm63xx: add missing board_ids to legacy_detect
These boards do not have a corresponding dts file yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44835
2015-03-16 11:52:35 +00:00
Jonas Gorski 906c9ef952 brcm63xx: add device tree based board detection
Use the device tree model property for detecting the board instead
of board id from nvram if present.

Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44834
2015-03-16 11:52:26 +00:00
Jonas Gorski 844e92e188 brcm63xx: populate /tmp/sysinfo
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44833
2015-03-16 11:52:20 +00:00
Jonas Gorski 9c53e344c0 brcm63xx: base-files: rename board_name to board_id
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44832
2015-03-16 11:52:16 +00:00
Jonas Gorski ca7f6d28c8 brcm63xx: Add DGND3700 v1 / DGND3800B support
This adds support for the Netgear DGND3700 v1 and DGND3800B.

DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.

The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
Jonas Gorski eed031d460 brcm63xx: brcm63xxpart: fix buffer overrun in of parser
We never account for the added partitions from the tag parser, so
allocated two partioness less than needed. This can cause issues when
the memory gets reused before the mtd code can actually add the
partitions.

Fixes oopses like:
[    0.920000] mtd: device 2 (rootfs) set to be root filesystem
[    0.924000] 1 squashfs-split partitions found on MTD device rootfs
[    0.932000] 0x0000002e0000-0x0000003f0000 : "rootfs_data"
[    0.940000] 0x000000010000-0x0000003f0000 : "linux"
[    0.948000] CPU 0 Unable to handle kernel paging request at virtual address 00010203, epc == 8028ddf8, ra == 801ad5d4
[    0.956000] Oops[#1]:
[    0.956000] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.18.8 #22
[    0.956000] task: 8181da78 ti: 8181e000 task.ti: 8181e000
[    0.956000] $ 0   : 00000000 10008f00 00010203 81049e40
[    0.956000] $ 4   : 00010203 000000d0 00000000 000000fd
[    0.956000] $ 8   : 00000000 80015490 00000000 80370000
[    0.956000] $12   : 00000000 00000001 00000000 2f736269
[    0.956000] $16   : 00010203 000000d0 8007bde0 81482000
[    0.956000] $20   : 00000000 00000004 81481f80 803c4b78
[    0.956000] $24   : 00000000 00000000
[    0.956000] $28   : 8181e000 8181fbe8 80b20000 801ad5d4
[    0.956000] Hi    : 00000000
[    0.956000] Lo    : 00000000
[    0.956000] epc   : 8028ddf8 strlen+0x4/0x20
[    0.956000]     Not tainted
[    0.956000] ra    : 801ad5d4 kstrdup+0x30/0x84
[    0.956000] Status: 10008f03 KERNEL EXL IE
[    0.956000] Cause : 00800008
[    0.956000] BadVA : 00010203
[    0.956000] PrId  : 0002a010 (Broadcom BMIPS4350)
[    0.956000] Modules linked in:
[    0.956000] Process swapper/0 (pid: 1, threadinfo=8181e000, task=8181da78, tls=00000000)
[    0.956000] Stack : 8148aa00 803c4bcc 00000000 801cd9d0 00000000 8148a400 818a1400 003f0000
          81482000 8007bde0 8148aa00 800ac78c 8148aa00 00000004 8037ae30 8181fc4c
          8148aa00 803bc074 803c0000 80074b84 00000000 00010000 00000004 ffffffff
          8037ae30 00000004 8148aa00 00000004 803c4b80 818a1400 803c0000 00000005
          81481f80 80074ce0 8181fc84 00000005 81879800 8008ece4 00000000 003f0000
          ...
[    0.956000] Call Trace:
[    0.956000] [<8028ddf8>] strlen+0x4/0x20
[    0.956000] [<801ad5d4>] kstrdup+0x30/0x84
[    0.956000] [<8007bde0>] allocate_partition+0x58/0x93c
[    0.956000] [<80074ce0>] add_mtd_partitions+0x90/0x144
[    0.956000] [<801cc228>] mtd_device_parse_register+0x78/0xcc
[    0.956000] [<801e7870>] of_flash_probe+0x658/0x728
[    0.956000] [<80216ee0>] platform_drv_probe+0x24/0x60
[    0.956000] [<801221f4>] driver_probe_device+0xcc/0x214
[    0.956000] [<800466f8>] __driver_attach+0x7c/0xb4
[    0.956000] [<800c38bc>] bus_for_each_dev+0x94/0xa4
[    0.956000] [<800c35e4>] bus_add_driver+0x104/0x1ec
[    0.956000] [<80122400>] driver_register+0xac/0x100
[    0.956000] [<80113a5c>] do_one_initcall+0x148/0x204
[    0.956000] [<803cbd1c>] kernel_init_freeable+0x168/0x220
[    0.956000] [<800157bc>] kernel_init+0x10/0x114
[    0.956000] [<800108a8>] ret_from_kernel_thread+0x14/0x1c
[    0.956000]
[    0.956000]
Code: 03e00008  27bd0028  00801021 <80430000> 10600003  00000000  080a377e  24420001  03e00008
[    1.192000] ---[ end trace 9d89ccbcae27fe40 ]---
[    1.200000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
[    1.200000]
[    1.200000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44787
2015-03-15 14:19:22 +00:00
Jonas Gorski 9d893d39bd brcm63xx: kmod-bcm63xx-udc: fix module path for 3.18+
Fix the module path for linux 3.18+.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44785
2015-03-15 14:19:10 +00:00
Jonas Gorski 12301a79b7 brcm63xx: fix 6368 cpu1 reg typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44784
2015-03-15 14:19:07 +00:00
John Crispin d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin fa097e5ae5 kernel: disbale HAMRADIO in generic config
HAMRADIO enabled in all generic configs, but no one platform directly
use related drivers/protocols. This symbol is only used for kmod-ax25
package modules. Furthermore, half of platforms explicitly disables
this symbol, what silently disables build of modules for kmod-ax25
package.

So disable HAMRADIO by-default in generic config, add it to kmod-ax25
package and remove it from platform specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44613
2015-03-06 07:56:21 +00:00
John Crispin 6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
Jonas Gorski 3069934e37 brcm47xx, brcm63xx: disable CONFIG_MIPS_O32_FP64_SUPPORT
The flag is experimental and requires toolchain support, which we don't
provide. Also neither target has an FPU so it becomes meaningless
without the FPU emulator enabled.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44584
2015-03-01 11:37:18 +00:00
Jonas Gorski 18322746de brcm63xx: prefer gpio-button-hotplug over button-hotplug
Saves us pulling in the input system, shaving off a few kb from image
sizes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44582
2015-03-01 11:37:06 +00:00
Jonas Gorski dd618e499f brcm63xx: fix DTS LEDs and buttons
- A4001N/A4001N1: fix swapped green and red LEDs
- CVG834G: add missing LED
- RTA1320: reorder LEDs by GPIO#
- V2500V: add missing LEDs and buttons
- WAP-5813n: fix WPS button (GPIO 35)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44577
2015-02-28 19:59:50 +00:00
Jonas Gorski 40e6eae61f brcm63xx: fix ethernet breakage in 3.18
Linux commit d75b1ade567ffab ("net: less interrupt masking in NAPI")
chose the samantics of the napi poll return value, which caused napi to
not resume interrups/polling anymore.

Fix the return value to restore expected behaviour.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44576
2015-02-28 19:59:46 +00:00
Jonas Gorski 6df9324642 brcm63xx: fix BCM63268 interrupt register locations for legacy probe
Legacy probe passed the IRQSTAT registers instead of the IRQMASK
registers causing all register accesses to be offset by 16 bytes.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44575
2015-02-28 19:59:34 +00:00
Jonas Gorski c2a89871c2 brcm63xx: fix gpio register usage
The driver expected data then dir, but both dts and legacy code passed
dir then data. Fix this by making the driver expect the registers in
ascending order, i.e. dir then data.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44574
2015-02-28 19:59:26 +00:00
Jonas Gorski b694c45d33 brcm63xx: backport and enable DT spi-gpio no CS support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44570
2015-02-27 23:48:48 +00:00
Jonas Gorski b6ad4b7332 brcm63xx: fix image generation and broken patch
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 44569
2015-02-27 23:48:32 +00:00
Jonas Gorski 8ff23c60e2 brcm63xx: remove gpio base workaround
Now that all gpio users without named gpios use DT, we do not need
to fix the gpio controller bases anymore.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44567
2015-02-27 17:40:09 +00:00
Jonas Gorski b82cb155fc brcm63xx: move buttons and leds to dts files
Register buttons and leds through DT for all available dts,
and remove them from the board files.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: remove leds/buttons from board files
       fix wrong led polarities for dsl-274xb-c2, cpva642, p870hw
       comment out spi-gpio and associated leds]

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44566
2015-02-27 17:40:04 +00:00
Jonas Gorski eea227c60d brcm63xx: probe gpio controllers through DT
Add a generic mmio gpio controller based driver and probe it
through device tree.

Use aliases for base calculation until we converted all users to
device tree or named gpios.

Convert bcm63xx_enet's ephy-reset gpio to use a named gpio.

While at it, remove the duplicate reset gpio defintion for livebox.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44565
2015-02-27 17:39:49 +00:00
Jonas Gorski 1efb7398e1 brcm63xx: convert BTV2500V to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44564
2015-02-27 17:39:29 +00:00
Jonas Gorski 90c15beee6 brcm63xx: convert RTA1320 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44563
2015-02-27 17:39:21 +00:00
Jonas Gorski 5a9b7c28c3 brcm63xx: convert RTA1025 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44562
2015-02-27 17:39:13 +00:00
Jonas Gorski 9a65e1a570 brcm63xx: use dtb for cvg834g
Add a dtsi for bcm3368, add a dts and profile for cvg834g, and convert
it to use ImageDTB. Since HCS requires more arguments, enhance the max
arguments of the call.
The image name is intentionally left blank to prevent non-initramfs
images to be built, as they currently contain no rootfs and consequently
won't work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44561
2015-02-27 17:39:07 +00:00
Jonas Gorski 69b327247c brcm63xx: image: move image argument to front in *DTB calls
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44560
2015-02-27 17:38:51 +00:00
Jonas Gorski f3c071b376 brcm63xx: add dts and profile for Livebox
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44559
2015-02-27 17:38:46 +00:00
Jonas Gorski dd7625ef15 brcm63xx: allow lzma to use 32MB RAM
Most 16 MiB RAM devices don't even load elf kernels, so it's safe to
assume we have at least 32 MB RAM. This fixes tftp booting with the
default package set as this already produces an uncompressed
kernel > 8 MiB.

New limit is 8 MiB compressed / 24 MiB compressed.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44558
2015-02-27 17:38:28 +00:00
Jonas Gorski 92eb27f56d package: mtd: move bcm963xx_tag definition into source code
Remove the need for the header file to be exported - we don't need most
of it anyway; all we care about are the offset of the rootfs length and
header crc fields.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44557
2015-02-27 17:38:25 +00:00
Jonas Gorski bb54859543 brcm63xx: do not align squashfs rootfs start
We do not need to align the start of read only rootfs's to erase blocks.
This allows us to write the squashfs rootfs directly behind the kernel,
potentially freeing up one erase block.

We still need to align for jffs2, so add a flag for imagetag to
optionally align the rootfs start.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44556
2015-02-27 17:38:14 +00:00
Jonas Gorski d4652e817a brcm63xx: drop call to prepare_generic_squashfs
We do not use the result, so no need to call it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44555
2015-02-27 17:38:09 +00:00
Luka Perkov 81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov 92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
John Crispin 019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Jonas Gorski bdb1ee51f8 brcm63xx: fix a few issues in irq chip drivers
Fix locking and lock usage, making it compile for SMP.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43578
2014-12-08 16:11:52 +00:00
Jonas Gorski ed7d8a0450 brcm63xx: alphabetically order image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43577
2014-12-08 16:11:32 +00:00
Jonas Gorski bc4dd8e119 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43576
2014-12-08 16:11:26 +00:00
Jonas Gorski 3fa17f6d58 brcm63xx: add DT support for USR9108
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43575
2014-12-08 16:11:08 +00:00
Jonas Gorski 218582e8ea brcm63xx: add DT support for F5D7633
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43574
2014-12-08 16:11:03 +00:00
Jonas Gorski d5f1dd9079 brcm63xx: add DT support for DG834GT/PN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43573
2014-12-08 16:10:54 +00:00
Jonas Gorski b0ae41f849 brcm63xx: add DT support for TD-W8900GB
According to the vendor tarball, the TD-w8900GB's flash has 64k erase
block size, but CFE spans two blocks. So fixup the image offset
accordingly but keep block size at its default (64k).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: add commit message, add image offset, change nvram offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43572
2014-12-08 16:10:46 +00:00
Jonas Gorski 84200cf189 brcm63xx: add DT support for DSL-2640B
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43571
2014-12-08 16:10:41 +00:00
Jonas Gorski 929ade0648 brcm63xx: add DT support for CPVA642
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43570
2014-12-08 16:10:17 +00:00
Jonas Gorski 387fd3ca26 brcm63xx: add kernel 3.18 support
Add 3.18 support based on 3.18-rc6. Only netboot tested.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43461
2014-12-01 13:27:26 +00:00
Jonas Gorski e8068f0b1b brcm63xx: register interrupt-controllers through DT when possible
Add the required nodes for the interrupt controllers and register
them through DT when a DTB is present.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43457
2014-12-01 00:52:07 +00:00
Jonas Gorski 443d730da8 brcm63xx: dtsi: add missing ranges properity to ubus nodes
Allows nodes behind it to be mapped.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43456
2014-12-01 00:51:56 +00:00
Jonas Gorski d9a2c55806 brcm63xx: dtsi: add missing properties to cpu nodes
Mark them as cpu nodes and add the addresses.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43455
2014-12-01 00:51:53 +00:00
Jonas Gorski ef4f69adc0 brcm63xx: convert to irq domain
Add irq-domain aware irqchip drivers for the irq controllers of bcm63xx
and switch to use them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43454
2014-12-01 00:51:51 +00:00
Jonas Gorski bb312899f6 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43453
2014-12-01 00:51:24 +00:00
Jonas Gorski 2b46097364 brcm63xx: add DT support for DSL-2650U
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43452
2014-12-01 00:51:17 +00:00
Jonas Gorski 61637aea1b brcm63xx: add DT support for DSL-2740B/DSL-2741B rev F1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43451
2014-12-01 00:51:12 +00:00
Jonas Gorski 53214ca548 brcm63xx: Add DT support for F@ST2504n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43450
2014-12-01 00:51:08 +00:00
Jonas Gorski 40350a5daf brcm63xx: add DT support for F@ST2704V2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43449
2014-12-01 00:51:04 +00:00
Jonas Gorski 3872151ce0 brcm63xx: add DT support for F@ST2604
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43448
2014-12-01 00:50:59 +00:00
Jonas Gorski 5f726ccd79 brcm63xx: add DT support for F@ST2404
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43447
2014-12-01 00:50:56 +00:00
Jonas Gorski 1041e3be6e brcm63xx: uci-defaults: network: move DSL-274x1 F1 to right section
The cpu port is at 8, not 5.

Fixes #18406.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43379
2014-11-25 19:07:02 +00:00
Jonas Gorski 93e5c701cc brcm63xx: unify dt image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43378
2014-11-25 19:06:51 +00:00
Jonas Gorski 5e111b0330 brcm63xx: move rsa signature to additional options
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43377
2014-11-25 19:06:43 +00:00
Jonas Gorski e1eec53136 brcm63xx: fix image generation
This fixes build issues introduced on r43361.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43376
2014-11-25 19:06:38 +00:00
Jonas Gorski cf0c966d9a brcm63xx: do not build images for unsupported routers
If there is no board support in the kernel, it does not make sense to
build images for devices. So drop any images for board ids for which
there are nc corresponding board_info structs in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43364
2014-11-24 14:44:46 +00:00
Jonas Gorski fb2a44df50 brcm63xx: refresh patches
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43363
2014-11-24 14:44:40 +00:00
Jonas Gorski c6fc6b42e1 brcm63xx: Add DT support for SPW303V
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43362
2014-11-24 14:44:33 +00:00
Jonas Gorski 5540ca300e brcm63xx: Add DT support for DV-201AMR
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43361
2014-11-24 14:44:28 +00:00
Jonas Gorski 89000dea4c brcm63xx: Add DT support for RG100A
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43360
2014-11-24 14:44:23 +00:00
Jonas Gorski 13d6fa0081 brcm63xx: Add DT support for A226G/M
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43359
2014-11-24 14:44:19 +00:00
Jonas Gorski b3ce1c4ea6 brcm63xx: Add DT support for AGPF-S0
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 43358
2014-11-24 14:44:12 +00:00
Jonas Gorski 2bab3e2796 brcm63xx: move board compatible strings into a table
Move compatible strings from board structs into separate table. This
allows for several board compatibles to match to the same board in case
e.g. only the flash size / partitions differ.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43341
2014-11-22 12:25:52 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Jonas Gorski 14ebb012a4 brcm63xx: fix wrong fixups pointer
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42756
2014-10-03 11:03:58 +00:00
Jonas Gorski 2fa8a656a6 brcm63xx: update spw500v sprom to values from gpl tarball
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42740
2014-10-02 12:26:36 +00:00
Jonas Gorski 60cb45427e brcm63xx: reorder some patches according to their upstream state
The irq rewrite was accepted upstream.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42739
2014-10-02 12:26:19 +00:00
Jonas Gorski 57214b00ae brcm63xx: Add DT support for 96368MVWG
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42738
2014-10-02 12:26:07 +00:00
Jonas Gorski 477826ef31 brcm63xx: Add DT support for 96368MVNgr
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42737
2014-10-02 12:25:57 +00:00
Jonas Gorski cdea47cbc3 brcm63xx: Add DT support for 96358VW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42736
2014-10-02 12:25:41 +00:00
Jonas Gorski 80db30b508 brcm63xx: Add DT support for 96358VW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42735
2014-10-02 12:25:36 +00:00
Jonas Gorski e7ade47fba brcm63xx: Add DT support for 96338W
Renamed of_board_id to convention.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42734
2014-10-02 12:25:27 +00:00
Jonas Gorski d9194da882 brcm63xx: Add DT support for 96338GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42733
2014-10-02 12:25:22 +00:00
Jonas Gorski 73f576dff2 brcm63xx: Add DT support for 96348R
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42732
2014-10-02 12:25:13 +00:00
Jonas Gorski 35cf1adfc6 brcm63xx: Add DT support for 96348GW-11
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42731
2014-10-02 12:25:07 +00:00
Jonas Gorski eaee4e3eb7 brcm63xx: Add DT support for 96348GW-10
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42730
2014-10-02 12:25:01 +00:00
Jonas Gorski 73d59ed675 brcm63xx: Add DT support for 96348GW
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42729
2014-10-02 12:24:39 +00:00
Jonas Gorski 99ecfbf702 brcm63xx: Add DT support for 96345GW2
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42728
2014-10-02 12:24:34 +00:00
Jonas Gorski a950e2fce8 brcm63xx: Add DT support for 963281TAN
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42727
2014-10-02 12:24:29 +00:00
Jonas Gorski ddcc29290c brcm63xx: fix brcm63xx fallback typo
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42726
2014-10-02 12:24:14 +00:00
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Jonas Gorski 51e1f1476f brcm63xx: Add DT support for P870HW-51a
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix nvram partition offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42248
2014-08-21 11:28:59 +00:00
Jonas Gorski b339304425 brcm63xx: Add DT support for HG553
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix linux partition length]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42247
2014-08-21 11:28:54 +00:00
Jonas Gorski 2f09960e46 brcm63xx: Add DT support for HG520v
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix nvram partition offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42246
2014-08-21 11:28:46 +00:00
Jonas Gorski 7bc83fdd13 brcm63xx: Add DT support for A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42245
2014-08-21 11:28:43 +00:00
Jonas Gorski a180c80f23 brcm63xx: Add DT support for A4001N1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42244
2014-08-21 11:28:40 +00:00
Jonas Gorski 83651bad85 brcm63xx: Add DT support for WAP-5813n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42243
2014-08-21 11:28:37 +00:00
Jonas Gorski 7b2d74a156 brcm63xx: Add DT support for VR-3025un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42242
2014-08-21 11:28:34 +00:00
Jonas Gorski 42bbf7bcb3 brcm63xx: Add DT support for VR-3025u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42241
2014-08-21 11:28:32 +00:00
Jonas Gorski 2936cacdfc brcm63xx: Add DT support for AR-5387un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42240
2014-08-21 11:28:28 +00:00
Jonas Gorski b97aa0b4fd brcm63xx: Add DT support for AR-5381u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42239
2014-08-21 11:28:18 +00:00
Jonas Gorski 1891b08f00 brcm63xx: Add DT support for CT-6373
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42238
2014-08-21 11:28:14 +00:00
Jonas Gorski e490cc7e14 brcm63xx: Add DT support for CT-5365
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42237
2014-08-21 11:28:10 +00:00
Jonas Gorski e46d57b3af brcm63xx: use DT for partitions on SPW500V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42236
2014-08-21 11:28:01 +00:00
Jonas Gorski 84001352fd brcm63xx: dts: fix spelling of "bank-width"
Fixes pflash registration through DT for 6338/6345/6348.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42235
2014-08-21 11:27:56 +00:00
Jonas Gorski 33e2a51d4d brcm63xx: dsl-274xb-c: linux partition should not be read-only
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42234
2014-08-21 11:27:44 +00:00
Jonas Gorski 770ba9d40f brcm63xx: enable fallback sprom for Speedport W500 V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42211
2014-08-18 21:50:45 +00:00
Jonas Gorski ddbff6a198 brcm63xx: tag images/dtbs with profiles
This prevents generating every supported image, except for de "Default" profile.
Also fixes Neufbox 6 image generation.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42210
2014-08-18 21:50:42 +00:00
Jonas Gorski 3db93a3351 brcm63xx: add profiles for DTB supported devices
Remove generic profiles and add profiles for each DTB supported device.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42209
2014-08-18 21:50:40 +00:00
Jonas Gorski 84ea696e03 brcm63xx: move generic profiles to top dir and remove smp profiles
Use generic profiles for brcm63xx instead of having similar profiles for
each subtarget.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42208
2014-08-18 21:50:37 +00:00