Commit Graph

467 Commits (6998b8a054a48a598cf961c785f311c6f71408cd)

Author SHA1 Message Date
Hauke Mehrtens 37fb5ab893 bcm53xx: add support for kernel 4.1
This only removes the patches already applied upstream and makes the
rest apply cleanly.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46128
2015-06-25 21:33:53 +00:00
Rafał Miłecki b0cdcf4e93 bcm53xx: respect ACTIVE_LOW when powering USB using GPIO
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46088
2015-06-21 16:47:05 +00:00
Rafał Miłecki 90d425039b bcm53xx: enable USB power on Buffalo WZR-1750DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46087
2015-06-21 16:26:23 +00:00
Rafał Miłecki 0049d0ca75 bcm53xx: update SPROM driver to include just-sent patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46086
2015-06-21 14:26:03 +00:00
Rafał Miłecki 167a2dc12e bcm53xx: enable USB power on Netgear R6250
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46083
2015-06-21 11:09:49 +00:00
Rafał Miłecki 64d3e52ad0 bcm53xx: update xHCI patch
This drops some debugging pr_info and adds platform_device_unregister.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46082
2015-06-21 11:09:30 +00:00
Rafał Miłecki 63bc66cfcd bcm53xx: fix enabling GPIO-controlled USB power
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46081
2015-06-21 10:18:52 +00:00
Rafał Miłecki b3afbe4918 bcm53xx: add xHCI support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46080
2015-06-21 10:18:43 +00:00
Jonas Gorski 9a59b350b7 kernel: update 3.18 to 3.18.16
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46011
2015-06-17 09:54:55 +00:00
Rafał Miłecki 351a2ec15f bcm53xx: use USB patches sent upstream by Hauke
This stabilizes USB support. The old patch was handling initialization
in a different order that was causing some problems with few USB 3.0
devices. Some weren't detected, some were working unstable, sometimes
USB 3.0 could hang the whole controller.

A still known issue (but not a regression) is controller hang triggered
by connecting USB 1.1 device when not having OHCI controller enabled
(kmod-usb-ohci).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45997
2015-06-16 08:28:46 +00:00
Rafał Miłecki 950c0191c2 bcm53xx: update NVRAM driver to MIPS version from upstream-sfr
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45943
2015-06-10 20:34:32 +00:00
Rafał Miłecki e011a5c375 bcm53xx: backport the latest 4.2 ARM BCM5302X patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45922
2015-06-07 14:41:05 +00:00
Rafał Miłecki 2364dd9331 bcm53xx: refresh kernel config
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45916
2015-06-06 22:34:37 +00:00
Rafał Miłecki 46a25c6e8a bcm53xx: fallback to default_do_upgrade if NAND upgrade fails
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45915
2015-06-06 17:52:53 +00:00
Rafał Miłecki 3d4f163df1 bcm53xx: sysupgrade: drop useless shift in platform.sh
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45914
2015-06-06 17:26:05 +00:00
Rafał Miłecki 54fb91f0cf bcm53xx: extract TRX from image on the fly
Extracting TRX to separated file in /tmp/ just wastes some RAM while we
can just pass a proper extracting command to the default_do_upgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45912
2015-06-06 17:23:03 +00:00
Rafał Miłecki 5e90144aec bcm53xx: sysupgrade: extract TRX partitions directly from vendor image
Extracting full TRX out of vendor format is not needed as otrx supports
passing TRX offset. This saves some RAM during sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45911
2015-06-06 17:05:31 +00:00
Rafał Miłecki 48da51ed03 bcm53xx: update NVRAM driver to support getting contents
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45907
2015-06-05 21:49:57 +00:00
Rafał Miłecki 9845d729a9 bcm53xx: build images for Asus devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45790
2015-05-27 16:20:06 +00:00
Hauke Mehrtens 47eca7a1ca bcm53xx: add OHCI (USB 1.1) support
There is also a OHCI controller, activate it for USB 1.1 support.

This should close #19601.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45716
2015-05-23 14:54:44 +00:00
Jonas Gorski 76d079204d kernel: update 3.18 to 3.18.14
Changelogs:

* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14

Build tested on brcm63xx and ipq806x, runtested on brcm63xx.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45711
2015-05-21 19:32:46 +00:00
Rafał Miłecki 63bb7c51db bcm53xx: add Asus RT-AC87U partitioning hacky workaround
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45694
2015-05-17 12:10:38 +00:00
Rafał Miłecki 75b8e247e3 bcm53xx: try to fix network on Asus RT-AC87U
This device seems to have switch port 7 connected to the CPU:
vlan1ports=1 2 3 5 7*
vlan2ports=0 7u
it should be handled by eth1 and NVRAM seems to confirm that (no
et0macaddr entry, existing et1macaddr & et1phyaddr entries).

One of the remaining ports (4/8?) may be connected to the Quantenna SoC.
Original firmware boot log contains following messages:
(0x00,0x5d)Port 5 States Override: 0xfb
(0x00,0x5f)Port 7 States Override: 0xfb
(0x00,0x0e)Port 8 States Override: 0x0a
(why does it force port 5 state?!)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45692
2015-05-16 17:14:25 +00:00
Rafał Miłecki ab83610563 bcm53xx: use backported Asus RT-AC87U DT patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45691
2015-05-16 15:44:00 +00:00
Rafał Miłecki abed46aacc bcm53xx: enable RT-AC87U UART console
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 45690
2015-05-16 11:45:52 +00:00
Rafał Miłecki 3dd9274332 bcm53xx: add support for SmartRG SR400ac
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45686
2015-05-13 20:01:15 +00:00
Rafał Miłecki b4ecf19faa bcm53xx: replace DT patches with backports from stblinux
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45685
2015-05-13 20:01:03 +00:00
Rafał Miłecki af019cad56 bcm53xx: use of_machine_is_compatible helper in b53 fix
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45684
2015-05-13 14:34:23 +00:00
Rafał Miłecki afb98aea4d bcm53xx: fix "typo" in b53 patch fixing R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45683
2015-05-13 13:12:57 +00:00
Rafał Miłecki 610ee0d85a bcm53xx: add b53 hacky workaround for Netgear R8000 CPU port
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45682
2015-05-13 13:11:17 +00:00
Rafał Miłecki 2d3aaa2d2f bcm53xx: fix default network interface on Netgear R8000
It has 3 Ethernet interfaces, each of them connected to separated switch
port. Default NVRAM uses switch port 8 as CPU which is connected to the
3rd interface (eth2).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45681
2015-05-13 13:11:04 +00:00
Rafał Miłecki 45ec92fa30 bcm53xx: bgmac: add support for the 3rd core
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45680
2015-05-13 13:11:00 +00:00
Rafał Miłecki d2e5e2bf54 bcm53xx: sync NVRAM and SPROM drivers with upstream version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45678
2015-05-13 08:30:45 +00:00
Rafał Miłecki 3a6cdac37c kernel: backport first bcma patches from 4.2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45652
2015-05-09 17:38:48 +00:00
Rafał Miłecki 33e597b241 bcm53xx: sort ports from NVRAM entries before matching them
Some devices have unsorted ports which may lead to broken config.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45575
2015-04-24 07:47:25 +00:00
Rafał Miłecki 866fe3895d bcm53xx: sysupgrade: check if new kernel fits partition size
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45547
2015-04-21 11:21:34 +00:00
Rafał Miłecki 457d9caf4d bcm53xx: sysupgrade: improve NAND warnings
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45546
2015-04-21 11:04:38 +00:00
Rafał Miłecki 5b9d70c888 bcm53xx: image: prepare for generating serial flash images
There are some rare devices without NAND, like Netgear EX6200 or
TP-LINK Archer C8.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45545
2015-04-21 08:42:41 +00:00
Rafał Miłecki a86e7330dc bcm53xx: sysupgrade: drop some debugging message
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45544
2015-04-21 08:34:25 +00:00
Rafał Miłecki 688c1d74b9 bcm53xx: sysupgrade: allow flashing NAND devices without --force
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45543
2015-04-21 08:32:59 +00:00
Rafał Miłecki d263c8e1a9 bcm53xx: sysupgrade: support flashing TRX with UBI image
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45542
2015-04-21 08:20:06 +00:00
Rafał Miłecki 92875dbd3d bcm53xx: append only 1 block (with erasing mark) to UBI
This is needed as prepare_generic_squashfs generates more data (in our
case 0x40004 B) and it's complex for sysupgrade to extract UBI image out
of TRX.

Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45541
2015-04-21 08:20:00 +00:00
Rafał Miłecki ac6879caaa bcm53xx: always use 4 MiB for TRX kernel partition to simplify upgrades
Signed-off-by: Dan Haab <dhaab@luxul.com>

SVN-Revision: 45540
2015-04-21 08:19:53 +00:00
Felix Fietkau c73adc80a3 bcm53xx: add profiling support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45480
2015-04-17 18:52:15 +00:00
Rafał Miłecki 9e03c36259 bcm53xx: fix handling absolute paths in sysupgrade (for vendor formats)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45473
2015-04-17 06:03:00 +00:00
Felix Fietkau 582b20c4e2 kernel: accidentally committed a few patches in the wrong place, move them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45468
2015-04-16 20:43:11 +00:00
Felix Fietkau b860db2c63 bcm53xx: add power button for WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45467
2015-04-16 20:09:55 +00:00
Felix Fietkau f6cbbe1332 bcm53xx: make NAND flash timeouts non-interruptible to fix corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45464
2015-04-16 20:09:36 +00:00
Felix Fietkau d51420eedc bcm53xx: increate trx maxlen to prevent build failures with bigger images
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45461
2015-04-16 20:09:15 +00:00
Felix Fietkau f8d499fd3f bcm53xx: fix WXR-1900DHP power led name and add usb led
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45460
2015-04-16 20:09:08 +00:00
Felix Fietkau c64fdadea7 bcm53xx: make use of the new board detection layer
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45458
2015-04-16 12:18:34 +00:00
Felix Fietkau 147e005fcf bcm53xx: add USB 2.0 power control for WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45451
2015-04-15 16:06:20 +00:00
Felix Fietkau 83e31eb7e7 bcm53xx: add USB 2.0 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45450
2015-04-15 16:06:14 +00:00
Rafał Miłecki 3edb55143d bcm53xx: add (disabled) support for upgrading kernel during sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45445
2015-04-14 20:50:59 +00:00
Rafał Miłecki 3cb8bf44e6 otrx: change command line API to start with a mode
This will allow adding more modes without options conflict.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45443
2015-04-14 20:50:46 +00:00
Felix Fietkau 923bef1678 bcm53xx: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45426
2015-04-13 22:23:37 +00:00
Felix Fietkau 24e9f52106 bcm53xx: add support for the Buffalo WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45419
2015-04-13 17:32:25 +00:00
Felix Fietkau 1e48a48915 bcm53xx: fix GPIO pins > 16
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45418
2015-04-13 17:32:18 +00:00
Felix Fietkau 1f70f452cc bcm53xx: add missing l2 cache controller AUXCTL bit
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45416
2015-04-13 17:32:05 +00:00
Felix Fietkau d24388da44 bcm53xx: add a comment about the gpio base patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45408
2015-04-12 22:10:44 +00:00
Rafał Miłecki 77c75e6fa3 bcm53xx: try to handle Netgear R8000 VLANs config
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45403
2015-04-12 20:11:25 +00:00
Felix Fietkau 2dbe131a62 bcm53xx: fix bcma gpio chip base
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45399
2015-04-12 17:22:04 +00:00
Rafał Miłecki 95ef64a779 bcm53xx: allow sysupgrade firmwares without UBI containing rootfs
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45392
2015-04-12 12:04:13 +00:00
Rafał Miłecki 24d40980b0 bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45391
2015-04-12 11:46:16 +00:00
Rafał Miłecki a04b71d330 bcm53xx: rework vendor fw handling to don't duplicate upgrade calls
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45389
2015-04-12 10:42:27 +00:00
Rafał Miłecki 503ccc502d bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45387
2015-04-12 10:20:59 +00:00
Rafał Miłecki 9d6e04a4f1 bcm53xx: build image for ASUS RT-AC56U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45353
2015-04-10 09:58:00 +00:00
Rafał Miłecki 71fcbffc91 bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45352
2015-04-10 09:42:48 +00:00
Rafał Miłecki 2198db252c bcm53xx: switch to the otrx for verifying TRX images
This adds checking CRC32 of provided firmware image.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45320
2015-04-09 06:33:56 +00:00
Rafał Miłecki 4c1ee6f24d bcm53xx: replace few BCM5301X patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45311
2015-04-08 09:22:02 +00:00
Rafał Miłecki b6e8da2e14 bcm53xx: image: share function checking TRX in provided firmware
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45292
2015-04-07 14:14:08 +00:00
Rafał Miłecki 7abd779730 bcm53xx: display all errors (not just the 1st one) when checking image
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45291
2015-04-07 14:14:02 +00:00
Rafał Miłecki a19b69a717 bcm53xx: compare provided firmware magic with device magic
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45290
2015-04-07 14:13:56 +00:00
Rafał Miłecki 509cce44bd bcm53xx: sprom: sync with mainline driver
The main difference now is bcm53xx registering it as platform (DT)
driver.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45230
2015-04-02 12:02:56 +00:00
Rafał Miłecki 91071e366c bcm53xx: sprom: simplify reading NVRAM after last backports
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45229
2015-04-02 12:01:56 +00:00
Rafał Miłecki bf828d3fd0 bcm53xx: use bcm47xx_nvram.c with the latest patches
This will be hopefully a mainline version.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45204
2015-04-01 07:21:59 +00:00
Felix Fietkau 414e8ba634 bcm53xx: use the correct kernel image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45003
2015-03-26 10:42:36 +00:00
Felix Fietkau 48c69e3022 bcm53xx: convert to new image building code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44996
2015-03-25 17:57:44 +00:00
Felix Fietkau 68ca1f285c bcm53xx: enable the full-line-of-zero optimization in the cache controller
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44977
2015-03-25 14:30:40 +00:00
Felix Fietkau 0a84da0841 bcm53xx: add missing cache controller errata options
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44947
2015-03-23 10:14:27 +00:00
Felix Fietkau a6f914d573 bcm53xx: remove linux 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44946
2015-03-23 10:14:20 +00:00
Rafał Miłecki fb6164a377 bcm53xx: add SMP support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44939
2015-03-22 15:07:40 +00:00
Rafał Miłecki e0155ad7b0 bcm53xx: add support for Asus RT-AC68U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44934
2015-03-22 01:57:15 +00:00
Rafał Miłecki 79c152b56b bcm53xx: fix Asus RT-AC87U magic (even if not used yet)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44933
2015-03-22 01:57:10 +00:00
Rafał Miłecki d324dd4ff3 bcm53xx: backport BCM5301X Netgear R6250/R8000 DT patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44932
2015-03-22 01:57:06 +00:00
Rafał Miłecki a4523c8e1d bcm53xx: refresh patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44931
2015-03-22 01:56:47 +00:00
Rafał Miłecki ba10454b91 kernel: backport bgmac patches
This allows dropping some hacky bcm53xx bgmac patch forcing link state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44917
2015-03-21 11:45:50 +00:00
Rafał Miłecki 782e432797 bcm53xx: enable FIXED_PHY, we will need it for bgmac
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44916
2015-03-21 11:45:27 +00:00
Rafał Miłecki 7c6f7b716b bcm53xx: switch to 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44852
2015-03-16 22:24:56 +00:00
Rafał Miłecki 0a9b7ea932 bcm53xx: support NVRAM prefixes with extra / in devpath
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44755
2015-03-14 16:35:56 +00:00
Rafał Miłecki 2b56913734 bcm53xx: fixup early device id 8012
Looks like the BCM53012 has a similar problem to the BCM53011.

Signed-off-by: Ian Kent <raven@themaw.net>

SVN-Revision: 44680
2015-03-11 17:32:02 +00:00
Rafał Miłecki 4c67f1d464 bcm53xx: fix typo in bcm47xx sprom driver
Fix thinko' in the bcm47xx sprom driver.

Signed-off-by: Ian Kent <raven@themaw.net>

SVN-Revision: 44679
2015-03-11 17:10:19 +00:00
Rafał Miłecki c3b9b35155 bcm53xx: fix printing NAND controller revision
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44622
2015-03-07 12:31:42 +00:00
John Crispin d15ac306fa kernel: move KERNFS to generic config
KERNFS symbol is selected by SYSFS, so place it in generic config.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44615
2015-03-06 07:56:47 +00:00
John Crispin f04a268a04 kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since
only one platfrom (omap) needs them.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44614
2015-03-06 07:56:34 +00:00
John Crispin 6617845711 kernel: move MTD_SPLIT_SUPPORT to generic config
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform
specific configs explicitly enables it, while no one platform disables
this symbol. So place it in generic config and remove from platform
specific configs.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>

SVN-Revision: 44612
2015-03-06 07:56:08 +00:00
Rafał Miłecki c2cf1abf8f bcm53xx: switch to IRQ buttons (keys)
Now bcma provides IRQ domain we don't have to poll anymore.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44596
2015-03-03 23:15:55 +00:00
Rafał Miłecki a416029d4d bcm53xx: add one more NVRAM possible size (0x180000)
Size 0x160000 was added to support Buffalo WZR-600DHP2, however Netgear
devices (R6250, R8000) require 0x180000.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44497
2015-02-20 07:07:53 +00:00
Rafał Miłecki 08b45f73db bcm53xx: include kmod-brcmfmac in default profile
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44467
2015-02-16 19:51:21 +00:00
Rafał Miłecki 44253d311f bcm53xx: sprom: extract for PCI host
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44464
2015-02-16 16:13:23 +00:00
Rafał Miłecki 4c98253648 bcm53xx: sprom: prepare to support other hosttype-s
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44463
2015-02-16 16:10:05 +00:00
Rafał Miłecki b5310e180d bcm53xx: use bcm47xx_wdt for restarting device
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44408
2015-02-11 14:41:07 +00:00
Rafał Miłecki 6bafb2f810 bcm53xx: backport bcm47xx_wdt changes to 3.18 to use this driver in future
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44390
2015-02-11 10:11:00 +00:00
Rafał Miłecki ddcbef5766 kernel: backport bcma patches queued for 3.20
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44385
2015-02-11 10:04:51 +00:00
Rafał Miłecki 3ae30df7db bcm53xx: drop unused (and broken) GPIOLIB patch
First of all this patch was broken since adding 3.18 for bcm53xx. It was
modifying ARCH_BRCMSTB instead of ARCH_BCM_5301X.
Secondly we don't need it as ARCH_MULTIPLATFORM selects
ARCH_WANT_OPTIONAL_GPIOLIB for us.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44383
2015-02-11 08:42:34 +00:00
Rafał Miłecki 3dbaab6f67 bcm53xx: fix loading SPROM content by bcma init change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44367
2015-02-09 18:43:05 +00:00
Rafał Miłecki 539cd23892 bcm53xx: fix partitions on Netgear R8000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44219
2015-01-30 07:25:43 +00:00
Rafał Miłecki 1d1a1c19bf bcm53xx: fix booting BCM4709
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44218
2015-01-30 06:58:35 +00:00
Rafał Miłecki ee75859533 bcm53xx: fix Netgear R8000 serial console
Thanks raven-auand.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44217
2015-01-30 06:30:44 +00:00
Rafał Miłecki 251b42d491 bcm53xx: early support for Netgear R8000
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44186
2015-01-28 21:55:43 +00:00
Rafał Miłecki bba98a3c53 bcm53xx: backport official Buffalo WZR-900DHP patch
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44070
2015-01-21 07:23:31 +00:00
Rafał Miłecki 3b701e8023 bcm53xx: backport spi-nor changes to add gd25q128 support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44069
2015-01-21 06:53:15 +00:00
Rafał Miłecki f0d73a4381 bcm53xx: use final (backported) patch fixing serial console
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44059
2015-01-20 08:04:27 +00:00
Rafał Miłecki ea1fe45fae bcm53xx: backport 3 BCM5301X patches from Hauke repo
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44058
2015-01-20 07:21:30 +00:00
Rafał Miłecki 9758327d83 bcm53xx: rename patches modifying DTS files
Ths will allow us to use early 3xx numbers for patches designed for
sending mainline.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44057
2015-01-20 06:58:03 +00:00
Rafał Miłecki 78b0da393b bcm53xx: add support/firmware for Asus RT-AC87U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44051
2015-01-19 11:05:22 +00:00
Rafał Miłecki 71c8ec020d bcm53xx: drop hacky patch making bcma init later
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43981
2015-01-16 15:59:29 +00:00
Rafał Miłecki 4ae1e883e8 bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43972
2015-01-14 13:41:05 +00:00
Rafał Miłecki f59c84c431 bcm53xx: enable earlyprintk on more devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43965
2015-01-14 07:42:48 +00:00
Rafał Miłecki 8e95c2c5be bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43964
2015-01-14 07:03:42 +00:00
Rafał Miłecki 55e766d78d bcm53xx: refresh configs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43963
2015-01-14 07:03:17 +00:00
Rafał Miłecki d1a28cfbb2 bcm53xx: support flashing CHK and CyberTAN images
SVN-Revision: 43800
2014-12-30 17:45:53 +00:00
Rafał Miłecki e7d7f59171 bcm53xx: support WAN connected to switch port 0
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43754
2014-12-20 15:09:01 +00:00
Hauke Mehrtens 192e945479 bcm53xx: PCIe: add link check again
When there is no device connected to the controller we should not start
the controller. This also changes between PCIe 1.0 and PCIe 2.0 speed
based on the device. This code is based on code from the new Broadcom
PCIe controller driver.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43748
2014-12-18 16:23:42 +00:00
Rafał Miłecki e21e9c5548 bcm53xx: backport spi-nor changes and update bcm53xxspiflash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43738
2014-12-17 14:53:25 +00:00
Rafał Miłecki dd9ca05249 bcm53xx: sysupgrade support for devices with serial flash
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43719
2014-12-15 15:43:46 +00:00
John Crispin 019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Rafał Miłecki 3aaee1ba02 bcm53xx: failsafe support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43639
2014-12-11 20:31:07 +00:00
Rafał Miłecki b55199cf41 bcm53xx: support LEDs on Buffalo devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43616
2014-12-11 11:23:26 +00:00
Rafał Miłecki 40d94a3ef0 bcm53xx: backport NVRAM driver sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43612
2014-12-10 21:50:57 +00:00
Rafał Miłecki ba81966001 bcm53xx: use bcma callback in SPROM driver to fill the SPROM
This is required because it has to be called at very precise moment. See
comment in driver for details.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43611
2014-12-10 21:24:11 +00:00
Rafał Miłecki b0b43e1ef9 bcm53xx: use static NVRAM pointer for now
This will allow us to sync with code sent for upstream.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43608
2014-12-10 19:56:56 +00:00
Rafał Miłecki 960130e99c bcm53xx: clean up nvram header
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43606
2014-12-10 18:29:26 +00:00
Rafał Miłecki 7093580424 bcm53xx: move SPROM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43604
2014-12-10 18:07:01 +00:00
Rafał Miłecki 27a91a99d9 bcm53xx: move NVRAM driver to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43603
2014-12-10 18:01:24 +00:00
Rafał Miłecki 3fab0d818c bcm53xx: move NVRAM header to the target files
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43602
2014-12-10 17:37:24 +00:00
Rafał Miłecki 613bc3ef3f bcm53xx: bcm_nand: fix compilation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43584
2014-12-08 18:28:54 +00:00
Rafał Miłecki aed6b26431 bcm53xx: bcm_nand: switch from cmdlinepart to ofpart
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43580
2014-12-08 17:39:07 +00:00
Hauke Mehrtens 7a2f186d70 bcm53xx: update the NAND driver
This adds some updates to the NAND driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43546
2014-12-07 21:55:21 +00:00
Hauke Mehrtens 664ae86dde bcm53xx: update the PCIe driver
This adds some updates to the PCIe driver and refreshed the config.

Most of these changes are done in preparation for mainling it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43545
2014-12-07 21:54:53 +00:00
Hauke Mehrtens d9bb8326fa kernel: update bcma and ssb to wireless-testing master-2014-12-05
This brings ssb and bcma to wireless-testing tag master-2014-12-05

In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43544
2014-12-07 21:53:20 +00:00
Hauke Mehrtens 563f963b1b kernel: refresh patches for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
Rafał Miłecki dc6171c734 bcm53xx: 3.18: add early support for Buffalo WZR-900DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43534
2014-12-07 11:02:52 +00:00
Rafał Miłecki a20fa1cb48 bcm53xx: add early support for Buffalo WZR-900DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43533
2014-12-07 10:55:44 +00:00
Rafał Miłecki 9bec9b86af bcm53xx: backport BCM5301X patches from arm-soc.git next/dt
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43530
2014-12-05 16:46:55 +00:00
Rafał Miłecki d1e0e39993 bcm53xx: squeeze (rename) BCM5301X patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43529
2014-12-05 16:15:16 +00:00
Rafał Miłecki 8ea3c20b23 bcm53xx: rename patches that were not upstreamed to 3xx
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43528
2014-12-05 16:13:27 +00:00
Rafał Miłecki 8033ccc975 kernel: update bcma up to 2014-10-27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43527
2014-12-05 16:11:03 +00:00
Hauke Mehrtens a69ebe234d kernel: update kernel 3.18 to rc4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43229
2014-11-10 22:51:30 +00:00
Rafał Miłecki 93b3924128 kernel: backport bcm47xxpart changes queued for 3.19
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43223
2014-11-08 21:41:21 +00:00
Hauke Mehrtens adbb5ad195 bcm53xx: bcma: get IRQs also from device tree
Add patches for getting the IRQ number for a device of the bcma bus
that were send for upstream inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43148
2014-11-01 15:57:30 +00:00
Hauke Mehrtens 6e6dffbe81 bcm53xx: set customized AUXCTL
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43146
2014-11-01 13:58:18 +00:00
Hauke Mehrtens 5e13e40591 bcm53xx: activate early printk
This makes it possible to activate early printk.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43145
2014-11-01 13:57:50 +00:00
Hauke Mehrtens 8e20cceeae bcm53xx: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43144
2014-11-01 13:55:02 +00:00
Hauke Mehrtens f12c4b0815 bcm53xx: remove support for fpu
This SoC does not have a vfpv3 FPU.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43098
2014-10-27 23:04:07 +00:00
Hauke Mehrtens 7fc9bb1aca bcm53xx: initial support for kernel 3.18
This adds initial support for kernel 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43097
2014-10-27 23:02:08 +00:00
Felix Fietkau c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Rafał Miłecki c14e0807bd bcm53xx: backport forgotten spi-nor change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43031
2014-10-22 14:34:43 +00:00
Rafał Miłecki 2466b04a5a bcm53xx: backport spi-nor patches from 3.18-rc1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43030
2014-10-22 14:16:18 +00:00
Rafał Miłecki bf0342f0ef bcm53xx: add support for Asus RT-N18U LEDs & buttons
Got GPIOs from #18152 thanks to Grrruk

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43010
2014-10-21 14:37:44 +00:00
Rafał Miłecki 4669d08e83 bcm53xx: switch RT-N18U firmware to the UBI
According to the ticket #18152 it also uses NAND with 0x20000 erase size
and 0x800 page size.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43008
2014-10-20 22:09:40 +00:00
Rafał Miłecki 4fce5d1951 bcm53xx: image: switch Netgear and Buffalo devices to UBI
We still don't have a smart sysupgrade method, but at least we can use
UBI which provides some protection for rootfs (SquashFS).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42941
2014-10-16 21:33:34 +00:00
Rafał Miłecki 150c200e91 bcm53xx: hack UBI to erase all dirty blocks left by CFE
UBI requires PEBs to be formatted (with a valid UBI header) or empty
(0xFF), however CFE doesn't clear blocks after flashing the image. To
workaround this problem, teach UBI to recognize EOF mark in a similar
way JFFS2 handles that in OpenWrt.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42940
2014-10-16 20:52:22 +00:00
Rafał Miłecki 1ffe299eab bcm53xx: enable UBI and UBIFS
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42939
2014-10-16 20:50:36 +00:00
Rafał Miłecki aa5b5153f9 bcm53xx: image: build UBI partition image
This could be used on NAND devices once we get UBI working.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42938
2014-10-16 20:48:56 +00:00
Rafał Miłecki 241c098fa1 bcm53xx: image: specify flash type for all devices
This will allow us to add proper support for NAND one day.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42937
2014-10-16 20:44:44 +00:00
Rafał Miłecki 579b0d9c5b bcm53xx: add support for Buffalo WZR-600DHP2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42925
2014-10-15 07:14:13 +00:00
Rafał Miłecki 96a33c0dd7 bcm53xx: fix Asus RT-N18U support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42924
2014-10-15 07:12:46 +00:00
Rafał Miłecki 5a03d0c931 bcm53xx: fix hangs in PCIe2 host driver
Accessing CFG regs with no card present results in SoC hang.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42895
2014-10-14 08:06:15 +00:00
Rafał Miłecki 540a6a45e4 bcm53xx: add temp bcma workaround that allows debugging
This way we will get logs if case of hang/crash in bcma or related code.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42894
2014-10-14 05:31:54 +00:00
Rafał Miłecki 78be7225c3 bcm53xx: prepare to support Asus RT-N18U
DT file doesn't include any GPIOs yet, but let's add it as we got some
interest in this device on IRC.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42864
2014-10-09 16:36:51 +00:00
Rafał Miłecki 9473673ae3 bcm53xx: add support for Buffalo WZR-1750DHP
Let's generate a simple TRX file as we can't get encrypted one.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42863
2014-10-09 16:36:05 +00:00
Rafał Miłecki 2818493e82 bcm53xx: add Netgear R6300 V2 LEDs and buttons
Thanks tusc (our forum user) for checking GPIOs.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42827
2014-10-06 21:33:17 +00:00
Felix Fietkau f35da063bc targets: remove useless quotes around KERNELNAME
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42780
2014-10-05 20:17:19 +00:00
Rafał Miłecki 7436b17075 bcm53xx: build R6250 firmware with "Other Regions" region
This prevents vendor firmware from warning about incompatible region.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42754
2014-10-03 10:40:12 +00:00
Rafał Miłecki 66922082ed bcm53xx: early support for Netgear R6300 V2
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42743
2014-10-02 19:30:08 +00:00
Rafał Miłecki 28301ea0b1 bcm53xx: early buttons support (without interrupts)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42718
2014-10-02 12:05:58 +00:00
Rafał Miłecki bd12c49473 bcm53xx: backport bcma RFC patch that fixes LEDs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42717
2014-10-02 10:42:30 +00:00
Rafał Miłecki 01ab343779 bcm53xx: support devices with more (13+) partitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42716
2014-10-02 09:51:54 +00:00
Rafał Miłecki bbae0f7df0 bcm53xx: select LEDs support by default
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42715
2014-10-02 05:54:18 +00:00
Rafał Miłecki 1421516e65 bcm53xx: add BCM5301X patches sent upstream (bus and R6250 LEDs)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42711
2014-10-01 13:38:50 +00:00
Rafał Miłecki 59b965194d kernel: update bcma to the tag master-2014-09-30 (wireless-next)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42710
2014-10-01 13:37:36 +00:00
Rafał Miłecki 26e85084b5 bcm53xx: rename BCM5301X DTS patch to match upstream order
SVN-Revision: 42708
2014-10-01 07:59:03 +00:00
Hauke Mehrtens a6616a6e48 bcm53xx: activate some workarounds for errors in the Cortex-A9
BCM4708 uses a Cortex-A9 rev r3p0 and a L2C-310 rev r3p2.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42690
2014-09-28 18:03:33 +00:00
Rafał Miłecki 8e525a43b4 kernel: update bcma to the tag master-2014-09-26 (wireless-next)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42672
2014-09-27 07:49:48 +00:00
Rafał Miłecki 747fd7871c bcm53xx: add a patch that fixes booting problems
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42659
2014-09-24 21:08:17 +00:00
Rafał Miłecki f036f5801f bcm53xx: image: use IMG_PREFIX for chk images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42649
2014-09-22 18:11:09 +00:00
Rafał Miłecki 23a07c6d18 bcm53xx: image: make filesystem a suffix for TRX files
This makes TRX files more /compatible/ with firmware files (e.g. CHK).
This will allow us to put some TRX files in BIN_DIR if we need to.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42646
2014-09-22 09:16:20 +00:00
Rafał Miłecki fd515112db bcm53xx: image: document arguments of various functions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42645
2014-09-22 08:37:18 +00:00
Rafał Miłecki 5f7be0ebf4 bcm53xx: image: rework Makefile and merge some functions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42644
2014-09-22 08:04:26 +00:00
Hauke Mehrtens 182e1dbcd4 bcm53xx: activate vfpv3 support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42642
2014-09-21 21:58:29 +00:00
Hauke Mehrtens 47aefcc563 bcm53xx: add nand flash driver
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42641
2014-09-21 21:58:02 +00:00
Hauke Mehrtens 2c6e0e0ae0 bcm53xx: update patches adding bcma support
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42640
2014-09-21 21:57:17 +00:00
Hauke Mehrtens c977fad4fd bcm53xx: add fixtrx
Without running fixtrx the image will not boot at the second time,
because the CRC the boot loader check is invalid at that time.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42639
2014-09-21 21:56:31 +00:00
Rafał Miłecki 223a309c3c bcm53xx: add support for GPIOs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42638
2014-09-21 21:18:30 +00:00
Rafał Miłecki 2468f9201f bcm53xx: rename console fixing patch
This squeezes BCM5301X patches.

SVN-Revision: 42637
2014-09-21 21:02:38 +00:00
Hauke Mehrtens 9434dfee87 bcm53xx: fix early serial console
This device actually has a 8250 serial with a shift of 0.
Tested this on a BCM4708.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42538
2014-09-14 19:22:49 +00:00
Rafał Miłecki 7cd532623e kernel: update bcma to the tag master-2014-09-11 (wireless-next)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42537
2014-09-14 17:31:13 +00:00
Hauke Mehrtens 180ee041fa bcm53xx: select nvram package by default
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42522
2014-09-13 20:28:44 +00:00
Luka Perkov 02629d8f87 kernel: update 3.14 to 3.14.18
Targets were build tested and patches are refreshed.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42463
2014-09-10 21:40:19 +00:00
Hauke Mehrtens 8313b329c6 kernel: add bcma patches sent upstream but not pushed yet
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42448
2014-09-08 19:50:53 +00:00
Hauke Mehrtens e030c50502 kernel: update bcma to the version from wireless-testing master-2014-09-04 tag
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42447
2014-09-08 19:50:11 +00:00
Hauke Mehrtens 823659f458 bcm53xx: update bcma device tree intergeneration and fix nvram parsing
This fixes lots of sparse and checkpatch errors and extends the
documentation.

This also fixes a problem in the nvram parser, it now detects the
correct nvram on my Netgear R6250.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42272
2014-08-24 15:57:49 +00:00
Hauke Mehrtens cc3545d165 bcm53xx: add bcm53xxspiflash driver for SPI flashes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42260
2014-08-21 21:11:04 +00:00
Hauke Mehrtens b118879cc3 bcm53xx: backport more spi-nor patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42259
2014-08-21 21:10:29 +00:00
Hauke Mehrtens f66a0912f7 bcm53xx: add SPI controller driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42223
2014-08-19 20:14:06 +00:00
Hauke Mehrtens bcb36cd494 bcm53xx: backport spi nor code form kernel v3.17-rc1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42222
2014-08-19 20:12:36 +00:00
Hauke Mehrtens a8bdf2f1e0 kernel: update bcma to code from v3.17-rc1
This is needed for some new patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42221
2014-08-19 20:06:24 +00:00
Hauke Mehrtens 4a9acacf53 kernel: 3.14: update bcm47xxpart
It it used by brcm47xx and bcm53xx targets, so put patches in generic.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42212
2014-08-18 21:57:54 +00:00
Hauke Mehrtens 32b3f9cdc6 brcm47xx/bcm53xx: improve description
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42204
2014-08-18 20:29:26 +00:00
Hauke Mehrtens 76866d42ac bcm53xx: remove kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42203
2014-08-18 20:28:53 +00:00
Hauke Mehrtens 3c3b3dd41d bcm53xx: add b43 wifi support
Now it is possible to use b43 wifi.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42143
2014-08-11 20:25:26 +00:00
Hauke Mehrtens 1d14e7ef1b bcm53xx: remove BCM4360 from PCI ids
bcma does not support this card and b43 hangs when probing this card.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42142
2014-08-11 20:24:45 +00:00
Luka Perkov dd8d729096 kernel: update 3.14 to 3.14.16
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 42070
2014-08-08 13:38:22 +00:00
Hauke Mehrtens 69c403c234 bcm53xx: update to kernel 3.14
Use kernel 3.14 by default and refresh the patches

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41913
2014-07-31 21:44:41 +00:00
Hauke Mehrtens 350765676e bcm53xx: add restart support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41912
2014-07-31 21:43:40 +00:00
Hauke Mehrtens 0d3690a202 kernel: update bcma and ssb to version master-2014-07-22
This is a backport of bcma and ssb from wireless-tesing/master tag
master-2014-07-22.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41804
2014-07-22 21:40:41 +00:00
John Crispin 7d8f187201 target/linux/*/image/Makefile: use new dts path variable
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41791
2014-07-21 18:42:06 +00:00
John Crispin ba63338d3f kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 41776
2014-07-20 17:31:11 +00:00
John Crispin 994e5ce2f9 kernel: update 3.10.36->3.10.44
205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41351
2014-06-26 13:47:42 +00:00
Hauke Mehrtens cdc7ea3337 bcm53xx: add support for the PCIe controller
This patch adds support for the PCIe controller
In addition to the PCIe controller a sprom is now provided by a device
tree driver to bcma from some nvram.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40880
2014-05-29 19:25:40 +00:00
Hauke Mehrtens 1c2dbe4e94 bcm53xx: add default config for switch
This scripts adds a default config for the switch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40565
2014-04-23 22:02:18 +00:00
Hauke Mehrtens d89aa2c3d6 bcm53xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40564
2014-04-23 21:53:50 +00:00
Gabor Juhos d2812cb036 kernel: update 3.10 to 3.10.36
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40467
2014-04-12 11:59:07 +00:00
Gabor Juhos 627baa28d3 kernel: update 3.10 to 3.10.34
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 40291
2014-03-27 09:28:33 +00:00
Gabor Juhos f677b1bc7e kernel: update 3.10 to 3.10.32
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39707
2014-02-23 10:59:40 +00:00
Hauke Mehrtens b75a9b04df bcm53xx: update the bcm53xx patches
This does not add any new features, just some changes to the patches
and a first try to use dt to set the irqs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39466
2014-02-04 23:00:55 +00:00
Hauke Mehrtens f491623c37 kernel: bgmac: update bgmac to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39465
2014-02-04 22:55:23 +00:00
Hauke Mehrtens e0d4a548fb kernel: bcma: update bcma to a version from kernel 3.14-rc1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39463
2014-02-04 22:53:52 +00:00
Gabor Juhos a2543d72d8 kernel: update 3.10 to 3.10.28
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39399
2014-01-26 11:30:34 +00:00
Gabor Juhos 0e2586a774 kernel: update 3.10 to 3.10.26
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 39220
2014-01-11 16:06:37 +00:00
Hauke Mehrtens e0027ed4ab bcm53xx: make the l2x0 L2 cache controller work
This fixes the DMA problems with the Ethernet driver.
This also updates some other parts of the patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39203
2014-01-04 23:46:44 +00:00
Hauke Mehrtens 2bc9700c0d bcm53xx: update the ethernet core hacks
The PHY always says there is no link
Instead of doing this dma sync a mdelay does the same trick and it is as unreliable.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39202
2014-01-04 18:27:09 +00:00
Hauke Mehrtens 5a55ace3b8 kernel: bgmac: update the driver patches to a version submitted for mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39201
2014-01-04 18:25:05 +00:00
Hauke Mehrtens bc3d934148 kernel: bgmac: update patches
This updates the bgmac backport patch to the current upstream version
and adds some more patches mostly for BCM4707.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39165
2013-12-26 23:22:31 +00:00
Hauke Mehrtens 952db22551 kernel: update kernel 3.10 to 3.10.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39059
2013-12-15 19:16:30 +00:00
Gabor Juhos f1ef0b92be kernel: update 3.10 to 3.10.21
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38972
2013-12-01 09:59:53 +00:00
Imre Kaloz 5de876bc78 there's no such thing as a soft fpu, this target should be fine without these
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38940
2013-11-29 10:25:43 +00:00
Hauke Mehrtens a3752801df bcm53xx: this ARM SoC does not have a FPU, use soft float.
model name      : ARMv7 Processor rev 0 (v7l)
Features        : swp half thumb fastmult edsp tls

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38796
2013-11-13 22:26:08 +00:00
Hauke Mehrtens aa790ea61f bcm53xx: make bgmac work
This makes bgmac work without sprom and refreshed the patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38715
2013-11-11 00:15:00 +00:00
Gabor Juhos 35656042f1 kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38652
2013-11-05 08:25:45 +00:00
Gabor Juhos b6b06000eb kernel: update 3.10 to 3.10.17
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38506
2013-10-23 12:51:05 +00:00
Hauke Mehrtens 81e2f00367 kernel: update kernel to 3.10.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38384
2013-10-13 19:28:29 +00:00
Hauke Mehrtens 125fc703bb kernel: bgmac: move other bgmac patches to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38289
2013-10-02 22:25:26 +00:00
Hauke Mehrtens 06c8b90ebf kernel: bgmac: move bgmac patches already applied in mainline kernel to generic
The bgmac driver will be used on the brcm47xx and the bcm53xx target.
These are only the patches already applied in current net-next/master
branch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38288
2013-10-02 22:24:01 +00:00
Gabor Juhos 9c8a5ef115 kernel: update 3.10 to 3.10.13
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 38228
2013-09-27 07:19:21 +00:00
Felix Fietkau c8609ab4f8 build: unify arm target cflags
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38211
2013-09-26 17:53:20 +00:00
Hauke Mehrtens 6910cb4d6f bcm53xx: bgmac: use srab switch driver
use the srab switch driver on these SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38200
2013-09-25 21:49:12 +00:00
Hauke Mehrtens 0bdc137636 bcm53xx: update bgmac driver
Update the bgmac driver with the patches already used for bcm47xx target.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38199
2013-09-25 21:47:25 +00:00
Hauke Mehrtens c75a970337 kernel: b53: add Register Access Bridge Registers (SRAB) interface
The SRAB interface is used on BCM4707 and BCM5301X SoCs.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38198
2013-09-25 21:44:28 +00:00