044c316167
kernel: prevent cryptomgr from pulling in useless extra dependencies for tests that are not run
...
Reduces kernel size after LZMA by about 5k on MIPS
SVN-Revision: 35325
2013-01-27 16:21:08 +00:00
e083c7926b
brcm47xx: create image for Netgear WNDR3400 V1
...
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
05623aebef
brcm47xx: add initial board detection code
...
SVN-Revision: 35322
2013-01-26 20:34:00 +00:00
a83d7bb109
brcm47xx: add gpio to irq function again
...
SVN-Revision: 35321
2013-01-26 20:33:23 +00:00
8933b918cd
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
...
in combination with kernel symbol export stripping this significantly reduces
the kernel image size
SVN-Revision: 35320
2013-01-26 16:26:13 +00:00
15be1c9ee7
kernel: update linux 3.7 to 3.7.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
680f460861
kernel: refresh 3.8 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35317
2013-01-24 17:04:52 +00:00
9781461a3d
mvebu: update to 3.8-rc4
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35316
2013-01-24 17:04:46 +00:00
4a69e20a10
kernel: add missing config options for 3.8
...
SVN-Revision: 35315
2013-01-24 14:48:15 +00:00
76c12ff797
brcm47xx: change generic profiles
...
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.
SVN-Revision: 35314
2013-01-24 14:38:10 +00:00
b60fc82ce5
kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well
...
SVN-Revision: 35310
2013-01-23 16:31:38 +00:00
8ce8960959
ar71xx: sync kernel sizes where possible to fix images for some devices ( #12874 )
...
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
8411e5c06e
bcm63xx: switch to b53 and swconfig
...
Switch to using the B53 switch driver where appropriate.
Use a non-tagged default config where it isn't confirmed to be
working.
Remove the switch configuration in preinit as the switch will now
be configured by the driver to use port isolation to prevent leakage
between lan and wan.
While at it, also provide a switch config for Neufbox 6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
17d51121a6
bcm63xx: expose the internal switch to b53
...
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
bb0118c66f
generic: add b53 swconfig switch driver
...
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.
Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35305
2013-01-23 10:12:33 +00:00
3e998d9cf9
bcm63xx: move bcm63xx-spi into the kernel
...
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
46e4246d61
kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore
...
SVN-Revision: 35248
2013-01-19 19:14:37 +00:00
ed6d399f8d
ramips: add profile and build image for the Tenda 3G300M
...
Factory image should be used to flash from
original firmware.
[juhosg: use the GENERIC_4M template]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35246
2013-01-19 17:05:07 +00:00
9891603eb5
ramips: add user-space support for the Tenda 3G300M
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
7eff5d2df0
ramips: add kernel support for the Tenda 3G300M
...
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.
Factory image should be used to flash from original firmware.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35244
2013-01-19 17:05:03 +00:00
f7a943694f
ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0
...
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.
Compile-tested, the generated files inspected with "file" utility.
[juhosg:
- keep the factory.bin images to avoid users confusion,
- use GENERIC_4M template for the W306R V2.0
- update commit log]
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35243
2013-01-19 15:36:13 +00:00
6aebe6a65d
ramips: allow to override image name/suffix in GENERIC_{4,8}M macros
...
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35242
2013-01-19 15:36:11 +00:00
60dde219d4
ramips: do not stop the build if some targets fail
...
This becomes crucial when you are using a generic profile to build an image
larger than 4M, e.g. for w502u.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35238
2013-01-19 08:51:45 +00:00
c3eeff807f
generic: rtl8366_smi: only assign pvid if no pvid was set yet
...
Only assign a pvid if the current pvid is 0. Fixes using mixed tagged
and untagged traffic on a port and the untagged vlan isn't the last one
of which the port is a member.
Tested on RTL8366S and RTL8367R.
Fixes #8501 .
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35227
2013-01-18 15:19:11 +00:00
3a2cccda2e
all targets: use numerically prefixed uci-defaults file names to better control order of execution
...
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
0de21d9747
kernel: update linux 3.7 to 3.7.3
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35216
2013-01-18 11:44:42 +00:00
c8215775f3
mvebu: enable PCI in kernel configuration
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35214
2013-01-17 22:29:26 +00:00
5e45a4344c
mvebu: enable PCIe on Marvell Armada 370 Reference Design
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35213
2013-01-17 22:29:22 +00:00
cf9343ac86
mvebu: enable USB on Armada 370 Reference Design
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35212
2013-01-17 22:29:18 +00:00
7e1e7063c2
mvebu: add preliminary support for PCI express
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35211
2013-01-17 22:29:13 +00:00
29c21b973b
mvebu: refresh patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35210
2013-01-17 22:28:58 +00:00
28acc6588d
kernel: refresh 3.8 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35209
2013-01-17 22:28:53 +00:00
a286a55c6f
mvebu: add board detection scripts
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35208
2013-01-17 22:28:48 +00:00
f7858466e2
mvebu: enable /proc/devicetree usage
...
This is going to be used for proper user-space board identification (ala
mcs814x).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35207
2013-01-17 22:28:37 +00:00
15b4681e3e
mvebu: add default profile
...
Such that relevant kernel modules are selected (USB, I2C, SATA, RTC,
SDIO)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35206
2013-01-17 22:28:33 +00:00
7399df1d69
x86: explicitely pass staging directory to grub-mkimage instead of relying on build time defaults ( #12821 )
...
SVN-Revision: 35200
2013-01-17 15:46:26 +00:00
57f7408b8a
generic: add EHCI|OHCI platform driver fix to 3.[36]
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35194
2013-01-17 13:54:14 +00:00
576aa2af0c
ramips: enable BR6425N in kernel config
...
Though originally contained in the patch applied in r35020, the move to 3.7 in
r34845 lost the kernel .config option. Reintroduce it to config-3.7.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 35191
2013-01-17 09:39:44 +00:00
05466923b8
mvebu: add support for EHCI controller
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35181
2013-01-15 19:55:50 +00:00
c53a347034
mvebu: add support for the Marvell Armada 370 Reference Design board
...
Keep the patches in sync with the upstream developments.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35179
2013-01-15 19:55:40 +00:00
58f8c5d87a
mvebu: enable SMP with SMP on UP enabled
...
The same kernel works ok for both Armada 370 (UP) and Armada XP (SMP)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35178
2013-01-15 19:55:31 +00:00
fa1afc1fa9
mvebu: add support for RTC
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35176
2013-01-15 19:55:19 +00:00
b3b04e9fb1
kernel: port 203-kallsyms_uncompressed.patch and 305-mips_module_reloc.patch to 3.8
...
SVN-Revision: 35162
2013-01-14 18:55:36 +00:00
78dc69e1d4
generic: remove EHCI platform driver fix from 3.8
...
It is not needed on 3.8.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35160
2013-01-14 17:53:55 +00:00
b035c594ae
generic: add EHCI|OHCI platform driver fix from the cns21xx target
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35159
2013-01-14 17:47:23 +00:00
1e103b2ecc
target: enable XZ BCJ decompressor code after r35097
...
Required to actually be able to mount squashfs xz compressed
filesystems.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35156
2013-01-14 16:34:25 +00:00
e0e3509b5c
kernel: add a config option for keeping the kallsyms table uncompressed, saving ~9kb kernel size after lzma on ar71xx
...
SVN-Revision: 35154
2013-01-14 16:08:18 +00:00
1474359bd3
ar71xx: fix unaligned access in cls_u32
...
SVN-Revision: 35132
2013-01-13 16:48:23 +00:00
e67b6ee395
ar71xx: fix unaligned access in a few more places
...
SVN-Revision: 35130
2013-01-13 15:37:58 +00:00
b5bcbdfbb5
ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32
...
SVN-Revision: 35129
2013-01-13 14:54:39 +00:00
53e0ba49b9
ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed
...
SVN-Revision: 35127
2013-01-13 13:06:09 +00:00
5d55cece6e
kernel: add back the mips module relocation patch
...
SVN-Revision: 35126
2013-01-13 12:23:42 +00:00
764520975c
ar71xx: add more cpu feature overrides, slightly reduces kernel size
...
SVN-Revision: 35125
2013-01-13 11:33:48 +00:00
310724c14d
ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel
...
SVN-Revision: 35124
2013-01-13 11:33:44 +00:00
2bf03f971d
brcm47xx: BCMA - Update default IRQ assignment per upstream change
...
Update the default IRQ assignment for unrecognized devices per
the upstream change.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 35121
2013-01-12 15:00:01 +00:00
5d1ecfc26d
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35119
2013-01-12 12:29:55 +00:00
ef75e6c71a
malta: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35118
2013-01-12 12:29:53 +00:00
3d057de4db
malta: build lzma and gzip compressed uImages
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35117
2013-01-12 12:29:52 +00:00
df8a8f2515
adm5120: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35116
2013-01-12 12:25:42 +00:00
d472567997
adm5120: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35115
2013-01-12 12:25:40 +00:00
eb2188c0e2
ar71xx: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35114
2013-01-12 12:25:38 +00:00
fe86bc9370
ar71xx: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35113
2013-01-12 12:25:36 +00:00
ca882f230d
mpc83xx: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35112
2013-01-12 12:25:34 +00:00
eba037cd1f
mpc83xx: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35111
2013-01-12 12:25:32 +00:00
ff2ce330a5
ramips: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35110
2013-01-12 12:25:30 +00:00
d53f8c3ded
ramips: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35109
2013-01-12 12:25:28 +00:00
f8f009ca43
rb532: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35108
2013-01-12 12:25:26 +00:00
cd71dcdab7
rb532: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35107
2013-01-12 12:25:24 +00:00
7098354885
ppc44x: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35106
2013-01-12 12:25:21 +00:00
83fccacec2
ppc44x: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35105
2013-01-12 12:25:20 +00:00
9d3bae8f0e
ppc40x: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35104
2013-01-12 12:25:18 +00:00
06fea75afb
ppc40x: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35103
2013-01-12 12:25:16 +00:00
a51f602494
cns21xx: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35102
2013-01-12 12:25:14 +00:00
bdc6ec4974
cns21xx: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35101
2013-01-12 12:25:12 +00:00
c19c30cefd
kernel: update linux 3.7 to 3.7.2
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35100
2013-01-12 11:43:08 +00:00
ecf230710f
mvebu: update to 3.8-rc3
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35086
2013-01-10 17:20:25 +00:00
548cb59826
brcm47xx: update bgmac driver to the version in mainline kernel
...
SVN-Revision: 35083
2013-01-10 14:22:19 +00:00
885eea1842
kernel: update bcma and ssb to master-2013-01-09 from wireless-testing
...
SVN-Revision: 35080
2013-01-10 14:05:18 +00:00
a2950fabd4
clean up PCI bus topology
...
This makes the PCI bus topology more standard for devices behind a bridge
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 35079
2013-01-10 13:25:12 +00:00
b63b970866
clean up PCI bus topology
...
This makes the PCI bus topology more standard for devices behind a bridge
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 35078
2013-01-10 13:23:33 +00:00
64910f4490
fixes USB reset on ARV7518
...
SVN-Revision: 35077
2013-01-10 06:44:58 +00:00
4834d09a3f
fixes none-pci build
...
SVN-Revision: 35062
2013-01-09 09:04:09 +00:00
25475a095e
mvebu: add inital support for Marvell Armada XP/370 SoCs
...
This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:
- Ethernet
- SDIO
- GPIOs
- SATA
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35058
2013-01-08 22:20:16 +00:00
97acd10458
add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35057
2013-01-08 22:20:11 +00:00
9b601b79d0
add support for 3.8 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35056
2013-01-08 22:20:06 +00:00
8dbed04ec9
kernel: add support for 3.8-rc2
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35055
2013-01-08 22:19:31 +00:00
7b0af8193b
brcm47xx: BGMAC Driver corrections
...
1) Fix what appears to be a logic error in bgmac_phy_advertise.
2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly. I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 35052
2013-01-07 22:51:39 +00:00
4ec57bdc06
update to 3.7
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35045
2013-01-07 18:16:36 +00:00
ba4de984b9
ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
...
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.
Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.
Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35037
2013-01-07 14:30:37 +00:00
251e4608b0
ar71xx: add missing Makefile entry to the 74HC153 GPIO patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35035
2013-01-07 14:14:41 +00:00
5154270694
orion: debloat the kernel some more
...
SVN-Revision: 35023
2013-01-06 15:09:47 +00:00
75657ff8a9
kernel: add missing config symbol
...
SVN-Revision: 35021
2013-01-06 15:09:39 +00:00
f2f9332350
adds support for Edimax BR-6524N
...
fixes #12754
Signed-off-by: <rq@akl.lt>
SVN-Revision: 35020
2013-01-06 11:11:42 +00:00
d5d2e8b4db
missing underscore in 3.3 regmap patch
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35018
2013-01-06 10:01:53 +00:00
2e8409cce3
kernel: port the regmap fix to 3.6 ( #12749 ), refresh patches for other versions
...
SVN-Revision: 35016
2013-01-05 13:33:44 +00:00
e6aac19237
fix regmap debloat patch
...
SVN-Revision: 35015
2013-01-05 00:20:05 +00:00
e952eaa112
bcm63xx: Add Huawei HG556a support
...
Add Huawei EchoLife HG556a support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35011
2013-01-04 14:47:57 +00:00
0e58173fa5
bcm63xx: Fix caldata partition mtd patch
...
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 35010
2013-01-04 14:47:50 +00:00
10fc07daac
bcm63xx: remove 3.3 support
...
3.6 is tested enough to be considered stable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35009
2013-01-04 14:47:43 +00:00
96f3911981
kernel: move regmap bloat out of the kernel image if it is only being used in modules
...
SVN-Revision: 34999
2013-01-03 18:39:50 +00:00
a105eea1a1
brcm47xx: various fixes and code cleanups for irq code
...
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34997
2013-01-03 16:56:54 +00:00
4443997fd8
brcm47xx: add bgmac driver
...
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.
Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.
SVN-Revision: 34995
2013-01-03 02:05:22 +00:00
8f6bdcffa1
brcm47xx: build b44 as a module
...
SVN-Revision: 34994
2013-01-03 02:00:25 +00:00
22d62d311a
brcm47xx: run ifup before starting the switch
...
In addition check_module is not needed, nobody checks the return value.
SVN-Revision: 34993
2013-01-03 01:59:43 +00:00
97b2b601c7
brcm47xx: BCMA - IRQ Update - Fix IRQ Flag for I2S Core
...
Adjust the IRQ Flag value from 8 to 7 for I2S Core for BCM4716 and
BCM4748 (per the Broadcom SDK). IRQ Flag values greater than 7 are
ignored when setting the interrupt masks.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34990
2013-01-03 01:56:13 +00:00
f74e847301
brcm47xx: improve IRQ handling for bcma based devices
...
This was party inspirited by patches send by Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34989
2013-01-03 01:55:34 +00:00
25afeba608
brcm47xx: add a new version of the nvram rewrite patch
...
This is the version like it was send for mainline inclusion.
SVN-Revision: 34988
2013-01-03 01:53:30 +00:00
edc7ab525f
brcm47xx: move patches already in the mainline kernel to the front
...
SVN-Revision: 34987
2013-01-03 01:51:31 +00:00
76c767f122
brcm47xx: remove support for kernel version 3.3
...
SVN-Revision: 34986
2013-01-03 01:48:43 +00:00
7a73c2f91f
generic: add some missing kernel config symbols spotted on x86
...
SVN-Revision: 34981
2013-01-02 19:10:24 +00:00
741f6ba7ef
x86: fix typo in alix2/net5501 default packages
...
SVN-Revision: 34972
2013-01-02 16:09:23 +00:00
569bbe4970
rt5350 switch support fix
...
RT5350 frame engine need reset frame engine and embedded switch together.
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 34969
2013-01-02 11:28:21 +00:00
373b0b9ad1
generic: fix UBIFS build error if XZ compression is disabled
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34959
2013-01-02 08:53:07 +00:00
d91117459c
adm5120: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34954
2013-01-01 13:15:49 +00:00
f0520f1714
adm5120: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34953
2013-01-01 13:15:44 +00:00
b4315df8e1
adm5120: switch to 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34952
2013-01-01 13:15:41 +00:00
edd36342e5
adm5120: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34951
2013-01-01 13:15:36 +00:00
92cd48e9ea
adm5120: remove NAND_NO_AUTOINCR flag from rb1xx.c
...
Also add a compatibility patch for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34950
2013-01-01 13:15:30 +00:00
03e09078dc
adm5120: use mtd_read helper in trxsplit.c
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34949
2013-01-01 13:15:20 +00:00
e1b13e15b2
adm5120: don't include asm/system.h in adm5120-hcd.c
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34948
2013-01-01 13:15:16 +00:00
cbe5d664e1
generic: add missing symbol for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34947
2013-01-01 13:15:11 +00:00
e1965a1d1a
ar71xx: register the NAND flash controller device on the AP135/136 boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34946
2013-01-01 13:10:41 +00:00
66efec6783
ar71xx: allow to register the NAND flash controller on the QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34945
2013-01-01 13:10:36 +00:00
2c77e5d7b3
ar71xxx: allow to select ATH79_DEV_NFC for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34944
2013-01-01 13:10:34 +00:00
d8446d65fe
ar71xxx: allow to build the ar934x_nfc driver for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34943
2013-01-01 13:10:29 +00:00
93c322cacc
ar71xx: fix NAND controller base for QCA955x SoCs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34942
2013-01-01 13:10:26 +00:00
b57cc9a538
ar71xx: fold AP135 patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34941
2013-01-01 13:10:22 +00:00
624eb36fff
adds missing symbol
...
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
ce57efa3ea
fixes usb port on arv 4518
...
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
fb07876f25
ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
...
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34934
2012-12-30 08:23:48 +00:00
6708d68c24
ramips: build firmware image for the Planex MZK-W300NH2 Router
...
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34927
2012-12-29 17:50:40 +00:00
8b1ac2ae37
ramips: add user-space support for the Planex MZK-W300NH2 Router
...
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34926
2012-12-29 17:50:38 +00:00
d6d06aceb0
ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router
...
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/ . It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.
[juhosg: move user-space support and image generation changes into
separate patches]
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34925
2012-12-29 17:50:35 +00:00
76537041eb
ramips: build image for Airlive AIR3GII
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34924
2012-12-29 17:50:34 +00:00
3aad9b4c9b
ramips: add user-space support for Airlive AIR3GII
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34923
2012-12-29 17:50:32 +00:00
3fcb8bb0dd
ramips: rt305x: add kernel support for AirLive AIR3GII
...
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.
Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button
[ 13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[ 13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.
Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)
[juhosg: move user-space support and image generation changes into
separate patches]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34922
2012-12-29 17:50:28 +00:00
87271e9f28
ar71xx: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34920
2012-12-29 16:02:31 +00:00
a3a6e0f039
ar71xx: Build the AP135 images
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34919
2012-12-29 16:02:28 +00:00
dddf05bde2
ar71xx: Add userspace support for AP135
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34918
2012-12-29 16:02:27 +00:00
1a379c5112
ar71xx: Add support for AP135
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34917
2012-12-29 16:02:24 +00:00
c6580f64b8
ar71xx: use a backported patch to fix AR933x UART baud rate calculation
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34915
2012-12-29 13:52:38 +00:00
348dc70c8c
ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size
...
SVN-Revision: 34912
2012-12-28 21:30:24 +00:00
41a039f464
mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
...
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
9bb8b9fadb
kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes
...
SVN-Revision: 34901
2012-12-27 22:59:51 +00:00
981b7410f8
brcm47xx: bcma: correct M25P32 serial flash ID
...
Thank you Rafał Miłecki.
SVN-Revision: 34900
2012-12-27 19:18:40 +00:00
386c37b4c2
mpc83xx: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34892
2012-12-26 10:40:54 +00:00
f67a7a479e
mpc83xx: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34891
2012-12-26 10:40:51 +00:00
36af140fe4
mpc83xx: switch to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34890
2012-12-26 10:40:50 +00:00
c4c8307ca1
mpc83xx: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34889
2012-12-26 10:40:48 +00:00
e537b8a093
mpc83xx: create package for the rbppc_cf module
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34888
2012-12-26 10:40:47 +00:00
fff75fe5b6
generic: more missing symbols for 3.{6,7}
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34887
2012-12-26 10:40:41 +00:00
f5b1cba606
ar71xx: build image for the AP136-020
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34886
2012-12-26 09:50:37 +00:00
f3f05d86fe
ar71xx: add user-space support for AP136-020
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34885
2012-12-26 09:50:36 +00:00
ed1889db33
ar71xx: add kernel support for the AP136-020 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34884
2012-12-26 09:50:34 +00:00
c887a7fe4e
ar71xx: rename AP136 to AP136-010
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34883
2012-12-26 09:50:31 +00:00
f8b4dfd172
ar71xx: dynamically set AR8327's PAD configuration on AP136
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34882
2012-12-25 18:45:32 +00:00
d4b4c7d102
generic: ar8216: add sgmii_delay_en field to ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34881
2012-12-25 18:45:31 +00:00
1dc2b6e8fa
ar71xx: ag71xx: show PHY interface mode in dmesg
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34880
2012-12-25 18:45:29 +00:00
69da894432
ramips: fix ASUS WL-330N3G MAC address
...
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.
Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.
Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34877
2012-12-24 06:52:41 +00:00
c5a36f13f0
ramips: fix wifi EEPROM extraction on DIR-615-Dx models
...
Patch from #12636 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34876
2012-12-24 06:52:38 +00:00
2c05915b24
add nol2x0 cmdline to disable l2x0 cache
...
L2 cache via L2X0 cache controller available on some ARM boards can
provide a performance boost in some situations but decrease performance
in others. This adds a kernel cmdline to disable L2X0 for cns3xxx based
boards.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34874
2012-12-23 18:53:38 +00:00
c3cb63661f
generic: ar8216: don't use 0 as default VID on AR8327
...
VID0 is reserved for priority-tagged packets.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34862
2012-12-22 18:30:04 +00:00
fa9d06c7f4
generic: more missing symbols for 3.{6,7}
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34861
2012-12-22 17:22:41 +00:00
8105c6badd
ramips: unify eeprom file name for the built-in wireless MAC
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34860
2012-12-22 16:09:03 +00:00
c81b4475c9
ramips: rt3883: fix build error
...
The cpuport_cfg field has been renamed to port0_cfg.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34859
2012-12-22 13:50:47 +00:00
64d31e6c6b
ar71xx: register the second ethernet interface on the AP136
...
Also fix the default network configuration
according to the new setup.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34854
2012-12-22 12:12:50 +00:00
5dec87afef
ar71xx: fix ethernet device registration for QCA9558
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34853
2012-12-22 12:12:48 +00:00
84a7051cef
ar71xx: rename QCA9558 ETH_CFG bit defines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34852
2012-12-22 12:12:46 +00:00
4085a5773d
ar71xx: fixup allowed PHY interface types for QCA9558
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34851
2012-12-22 12:12:44 +00:00
f01a786825
ar71xx: don't assign any MII bus device on QCA9558 by default
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34850
2012-12-22 12:12:43 +00:00
9edcd9d3a3
ar71xx: ag71xx: fix mii_bus_dev sanity check
...
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34849
2012-12-22 12:12:41 +00:00
ad0f03d250
ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev
...
Trying to do that causes a NULL pointer dereference:
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1 ]:
Cpu 0
$ 0 : 00000000 00000000 00000000 00000001
$ 4 : 00000000 802e6390 ffff8f45 00000001
$ 8 : 804b5360 ffffff80 802f93bc 00000000
$12 : 802f93e8 00000000 00000000 00000000
$16 : 8381aba0 8381aba0 00000000 00000000
$20 : 8295eff0 00000032 80000000 004101b8
$24 : 00000000 777265b0
$28 : 82936000 82937cf0 00420000 801d18d4
Hi : 00000000
Lo : 00000001
epc : 801d170c ar7240sw_reset+0x1c/0x19c
Tainted: G O
ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03 KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34848
2012-12-22 12:12:40 +00:00
3931c9524c
generic: ar8316: allow to configure port 6 via platform data on AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34847
2012-12-22 12:12:37 +00:00
a0b31f97bb
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
b44cdcde8e
ramips: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34845
2012-12-22 12:11:13 +00:00
b81667cb23
ramips: convert to use {e,o}hci-platform driver
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34843
2012-12-22 12:11:08 +00:00
c0e1a6f342
generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers
...
Backport of upstream commits:
86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34842
2012-12-22 12:11:06 +00:00
efe3225e2b
ar9 did not load atm driver properly
...
SVN-Revision: 34840
2012-12-22 10:16:52 +00:00
379cd6e25e
dont use input layer for gpio buttons
...
SVN-Revision: 34839
2012-12-21 20:04:20 +00:00
90a3761b0b
default switch setup for WBMR
...
SVN-Revision: 34838
2012-12-21 20:04:12 +00:00
ae0b9ff1ce
Setting the MDC clock to 2.5MHz and changing the mii mode to rgmii seems to fix the communication issues with the ar8316 switch. (ticket #11143 )
...
Tested only on the wbmr-hp-g300h, could affect/break other devices.
Signed-off-by: Sebastian Mayr <sebastian.mayr@student.uibk.ac.at>
SVN-Revision: 34837
2012-12-21 20:04:04 +00:00
9818a1f00b
adds script to set wps info on boards with a wps button
...
SVN-Revision: 34836
2012-12-21 20:03:59 +00:00
3134205dfd
minor tweaks to WBMR image
...
SVN-Revision: 34835
2012-12-21 20:03:54 +00:00
f4b2439554
add missing PHY_BASIC_FEATURES to 100mbit phys
...
SVN-Revision: 34826
2012-12-21 14:41:35 +00:00
861bf6af49
fix typo inside fritz3370 devicetree file
...
SVN-Revision: 34825
2012-12-21 14:41:30 +00:00
54c096527a
more devicetree fixes
...
SVN-Revision: 34824
2012-12-21 13:47:55 +00:00
59cc6d9ddd
improve button handling
...
SVN-Revision: 34823
2012-12-21 13:47:50 +00:00
7ce4c81647
add phy-reset gpio handling to xrx200-net
...
SVN-Revision: 34822
2012-12-21 13:47:44 +00:00
42d668174e
add more lantiq phy ids based on daniels uboot code
...
SVN-Revision: 34821
2012-12-21 13:47:40 +00:00
16c5946f8b
refresh patch and install v1.1 gphy blobs
...
SVN-Revision: 34820
2012-12-21 13:47:35 +00:00
123343d424
make to rtl8366_smi of binding use gpio_is_valid
...
SVN-Revision: 34816
2012-12-21 13:47:14 +00:00
840d0d246c
kernel: add solos-pci update for 3.3
...
Same patches that I just merged for 3.6 and 3.7, except with one
additional fix that went into v3.4 that needed to be included.
Submitted more for the benefit of the AA branch than for trunk.
[juhosg: refresh the patch with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34813
2012-12-21 10:38:33 +00:00
04ce7e213f
rb532: add support for 3.7
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34812
2012-12-20 19:25:43 +00:00
e1b5eeeaa4
ramips: Add USB support for DAP-1350 platform.
...
It seems to work as intended, but only lightly tested.
Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>
SVN-Revision: 34811
2012-12-20 19:17:17 +00:00
311d921e12
rb532: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34810
2012-12-20 19:09:03 +00:00
befb29c7a3
rb532: switch to 3.6.11
...
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34809
2012-12-20 19:09:01 +00:00
dbcb4708fb
rb532: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34808
2012-12-20 19:09:00 +00:00
5399d00ae6
ppc44x: add support for 3.7
...
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34807
2012-12-20 18:11:22 +00:00
2d6a41cf5d
kernel: add solos-pci patches from 3.8 for new hardware
...
[juhosg: refresh patches with quilt, skip the patch for 3.3]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34806
2012-12-20 17:14:57 +00:00
d21275a36b
linux: add missing symbols for 3.{6,7}
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34805
2012-12-20 17:14:56 +00:00
a81fa11243
cns21xx: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34801
2012-12-20 14:51:17 +00:00
1d7ba088e6
ppc40x: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34800
2012-12-20 14:51:16 +00:00
708c8c3d0d
ppc40x: add missing NULL terminator to avoid boot panic on PPC40x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34799
2012-12-20 14:37:39 +00:00
e108cb91c0
ar71xx: rename fix-ar933x-reset patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34798
2012-12-20 14:13:16 +00:00
5da1d7daa5
ppc40x/44x: disable SWIOTLB
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34797
2012-12-20 14:09:39 +00:00
1b0aaff246
adds a fix for ar8216 mii detection on etop driver
...
SVN-Revision: 34795
2012-12-19 16:20:24 +00:00
4d4b2d3ced
merge /lib/functions/boot.sh and /lib/functions.sh
...
SVN-Revision: 34794
2012-12-19 16:07:53 +00:00
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
439a869090
Do not overload mount-call - trying to reduce confusion
...
The behaviour of calling 'mount' differed depending on whether it called
the busybox-mount, the mount of util-linux, the mount defined in
/lib/functions.sh and /lib/functions/boot.sh
/etc/preinit even included /lib/functions.sh and /lib/functions/boot.sh,
both re-defining 'mount'.
SVN-Revision: 34792
2012-12-19 16:07:46 +00:00
687920ba3e
minor basefiles fixes
...
SVN-Revision: 34790
2012-12-19 15:17:42 +00:00
e472671bde
fix gptu clocks
...
SVN-Revision: 34789
2012-12-19 15:17:31 +00:00
5495ffbfdf
more board file fixes
...
SVN-Revision: 34788
2012-12-19 15:17:11 +00:00
c0515a5a8b
ppc44x: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34787
2012-12-19 09:45:43 +00:00
aedd9433fa
ppc44x: switch to 3.6.11
...
Compile tested only. The target is broken anyway,
so the kernel version does not matter too much.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34786
2012-12-19 09:45:42 +00:00
982d3e3f7a
ppc44x: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34785
2012-12-19 09:45:40 +00:00
5f82aa4d15
ar71xx: merge machine patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34783
2012-12-19 08:50:45 +00:00
cf99770800
ar71xx: build image for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: reorder MR3220 MultiProfile entry]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34782
2012-12-19 08:50:44 +00:00
b1b7aa674e
ar71xx: add user-space support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: add uci-defaults/network support]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34780
2012-12-19 08:50:41 +00:00
0767605d17
ar71xx: add kernel support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg:
- remove custom LED and button arrays
- use separate machine specific patch
- update Kconfig]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34779
2012-12-19 08:50:35 +00:00
4aa8272c8b
fix gptu patch - tapi should now load
...
SVN-Revision: 34777
2012-12-18 20:12:57 +00:00
c62586382a
ppc40x: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34776
2012-12-18 20:10:37 +00:00
7d0cf4f7a0
ppc40x: switch to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34775
2012-12-18 20:10:34 +00:00
565cdf58b5
ppc40x: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34774
2012-12-18 20:10:31 +00:00
2143de1a3d
generic: disable crashlog on ppc
...
It causes panic on boot:
[ 0.194287] __ioremap(): phys addr 0x1f00000 is RAM lr crashlog_init_fs
[ 0.200902] Unable to handle kernel paging request for data at address 0x00000000
[ 0.208347] Faulting instruction address: 0xc026cb10
[ 0.213282] Oops: Kernel access of bad area, sig: 11 [#1 ]
[ 0.218586] PowerPC 40x Platform
[ 0.221783] Modules linked in:
[ 0.224817] NIP: c026cb10 LR: c026cb10 CTR: c000c1b8
[ 0.229745] REGS: c1825ed0 TRAP: 0300 Not tainted (3.6.11)
[ 0.235435] MSR: 00029030 <EE,ME,IR,DR> CR: 42004082 XER: 00000000
[ 0.241745] DEAR: 00000000, ESR: 00000000
[ 0.245724] TASK = c181e000[1] 'swapper' THREAD: c1824000
GPR00: c026cb10 c1825f80 c181e000 00000000 0000004b 0000004b c029a4dd 6f675f69
GPR08: 6e69745f c0290440 00000000 00000000 22004084 00000000 01ffc400 004011f8
GPR16: 00000001 ffffffff 00000000 007fff00 01ff6120
2012-12-18 20:10:02 +00:00
1e8ab43834
generic: add missing symbols for 3.{6,7}
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34772
2012-12-18 20:09:58 +00:00
af48676b28
update to 3.7.1
...
SVN-Revision: 34771
2012-12-18 19:32:01 +00:00
1080f68b2b
etrax: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34768
2012-12-18 17:54:04 +00:00
b86e82e5cc
s3c2442: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34767
2012-12-18 17:54:02 +00:00
db831511d2
goldfish: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34766
2012-12-18 17:53:53 +00:00
979bc5536d
ps3: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34765
2012-12-18 17:53:51 +00:00
6f794eeedb
pxcab: R.I.P.
...
It is broken and it is not maintained by anyone since long time.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34764
2012-12-18 17:53:17 +00:00
029553b698
refresh kernel configs with kconfig.pl
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34763
2012-12-18 15:54:15 +00:00
7ff7340304
geos: add missing config-3.7 file
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34762
2012-12-18 15:51:45 +00:00
149534f3ed
ar71xx: image: add OpenMesh profile
...
It allows to build firmware images for all OpenMesh
products in one step.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34761
2012-12-18 15:16:05 +00:00
8903f8581b
kernel: update linux 3.7 to 3.7.1
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34760
2012-12-18 15:13:31 +00:00
b2caa5db24
cns21xx: remove broken flag
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34759
2012-12-18 14:51:58 +00:00
39796c434c
cns21xx: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34758
2012-12-18 14:51:58 +00:00
991ebc29d7
cns21xx: switch to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34757
2012-12-18 14:51:57 +00:00
9e1a54296a
cns21xx: fix build errors on 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34756
2012-12-18 14:51:55 +00:00
5a680f1cbf
geos: update to 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34755
2012-12-18 14:50:48 +00:00
9b15d3e22a
kernel: add 3.7 support for x86
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34754
2012-12-18 14:50:47 +00:00
d537f76ddd
kernel: Fix Cisco SIP NAT patch to build with 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34753
2012-12-18 14:50:45 +00:00
0c64d55b14
kernel: add missing config option BATTERY_DS2781 for 3.7
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34749
2012-12-18 14:50:41 +00:00
44b9898251
kernel: update linux 3.6 to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
fe8efb72ca
ramips: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34744
2012-12-17 22:28:11 +00:00
fc0da6852e
ar71xx: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34743
2012-12-17 22:28:09 +00:00
1bdea42662
kernel: fix a warning in the O_DIRECT debloat patch
...
SVN-Revision: 34740
2012-12-17 20:55:49 +00:00
2bda7a5b41
kernel: add some debloat patches, strip down procfs and make O_DIRECT support optional, saves ~15K after lzma on MIPS
...
SVN-Revision: 34737
2012-12-17 15:11:39 +00:00
d153bdbba9
generic: rtl836x: fix compiler warnings
...
CC drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366s.c:16:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366s.c: In function 'rtl8366s_probe':
drivers/net/phy/rtl8366s.c:1094:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366s.c:1055:32: warning: unused variable 'pdata'[-Wunused-variable]
CC drivers/net/phy/rtl8366rb.o
In file included from drivers/net/phy/rtl8366rb.c:17:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366rb.c: In function 'rtl8366rb_probe':
drivers/net/phy/rtl8366rb.c:1214:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8366rb.c:1175:32: warning: unused variable 'pdata'[-Wunused-variable]
CC drivers/net/phy/rtl8367.o
In file included from drivers/net/phy/rtl8367.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367.c: In function 'rtl8367_probe':
drivers/net/phy/rtl8367.c:1712:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367.c:1677:32: warning: unused variable 'pdata' [-Wunused-variable]
CC drivers/net/phy/rtl8367b.o
In file included from drivers/net/phy/rtl8367b.c:15:0:
include/linux/of_platform.h:106:13: warning: 'struct device' declared inside parameter list [enabled by default]
include/linux/of_platform.h:106:13: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8367b.c: In function 'rtl8367b_probe':
drivers/net/phy/rtl8367b.c:1494:2: warning: label 'err_out' defined but not used [-Wunused-label]
drivers/net/phy/rtl8367b.c:1459:32: warning: unused variable 'pdata' [-Wunused-variable]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34731
2012-12-17 13:02:18 +00:00
61d715505c
ar71xx: add profile and build image for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34730
2012-12-17 12:28:21 +00:00
abbd18776e
ar71xx: add user-space support for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34728
2012-12-17 12:28:11 +00:00
ff3f28265f
ar71xx: add kernel support for the UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34727
2012-12-17 12:28:02 +00:00
7bcb6b5479
make pinctrl-falcon honour status="disbaled";
...
SVN-Revision: 34714
2012-12-16 10:03:28 +00:00
573cf13419
fix falcon profile
...
SVN-Revision: 34713
2012-12-16 10:03:23 +00:00
33d3433d75
fix i2c-lantiq module
...
SVN-Revision: 34712
2012-12-16 10:03:18 +00:00
b637eb598d
add falcon devicetree files
...
SVN-Revision: 34711
2012-12-16 10:03:11 +00:00
8c3306b8b6
kernel: add a missing config symbol for 3.7
...
SVN-Revision: 34710
2012-12-15 22:00:03 +00:00
eba8cccd88
linux: generic: rtl836*: fix compilation with !CONFIG_OF
...
fixes the following errors caused by r34682:
CC [M] drivers/net/phy/rtl8366_smi.o
In file included from drivers/net/phy/rtl8366_smi.c:26:0:
drivers/net/phy/rtl8366_smi.h:149:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.h:149:46: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:65: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe_plat':
drivers/net/phy/rtl8366_smi.c:1400:44: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1402:11: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1403:16: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1415:46: warning: 'struct platform_device' declared inside parameter list [enabled by default]
drivers/net/phy/rtl8366_smi.c:1415:21: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_smi_probe':
drivers/net/phy/rtl8366_smi.c:1420:31: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1424:10: error: dereferencing pointer to incomplete type
drivers/net/phy/rtl8366_smi.c:1425:3: warning: passing argument 1 of 'rtl8366_smi_probe_of' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1392:19: note: expected 'struct device_node *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c:1427:3: warning: passing argument 1 of 'rtl8366_smi_probe_plat' from incompatible pointer type [enabled by default]
drivers/net/phy/rtl8366_smi.c:1398:5: note: expected 'struct platform_device *' but argument is of type 'struct platform_device *'
drivers/net/phy/rtl8366_smi.c: At top level:
drivers/net/phy/rtl8366_smi.c:1438:1: error: conflicting types for 'rtl8366_smi_probe'
drivers/net/phy/rtl8366_smi.h:149:21: note: previous declaration of 'rtl8366_smi_probe' was here
make[7]: *** [drivers/net/phy/rtl8366_smi.o] Error 1
make[6]: *** [drivers/net/phy] Error 2
make[5]: *** [drivers/net] Error 2
make[4]: *** [drivers] Error 2
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34703
2012-12-15 13:32:02 +00:00
3ca51b5399
select hcd as a default package for the dgn3500
...
SVN-Revision: 34702
2012-12-15 11:01:16 +00:00
85e4da7e23
EASY80920 has 2 usb ports
...
SVN-Revision: 34701
2012-12-15 11:01:11 +00:00
3dac521a49
remove 3.3 and 3.6
...
SVN-Revision: 34699
2012-12-15 02:01:08 +00:00
1dece11487
cleanup basefiles
...
SVN-Revision: 34698
2012-12-15 02:01:00 +00:00
601bc28669
clean up modules.mk
...
SVN-Revision: 34697
2012-12-15 02:00:55 +00:00
2c33df0376
add devicetrees
...
SVN-Revision: 34691
2012-12-15 02:00:20 +00:00
3a948770cf
add linux-v3.7
...
SVN-Revision: 34687
2012-12-15 01:59:45 +00:00
d8678644f9
make rtl8366 driver OF capable
...
SVN-Revision: 34682
2012-12-15 01:59:08 +00:00
4901ac8225
brcm47xx: improve suppressing printing if a module was found in preinit function.
...
Thank you Bastian Bittorf
SVN-Revision: 34680
2012-12-14 22:45:12 +00:00
57d7df3a35
generic: export include/linux/switch.h on 3.3, 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34678
2012-12-14 12:11:48 +00:00
a860153cce
generic: disintegrate UAPI from include/linux/switch.h
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34677
2012-12-14 12:11:41 +00:00
8aed692309
generic: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34676
2012-12-14 08:47:39 +00:00
272ef8ac00
generic: update pci_disable_usb_common_quirks patch
...
Fixes the following compiler warning:
drivers/usb/host/pci-quirks.c:459:23: warning: 'quirk_usb_handoff_uhci' defined but not used [-Wunused-function]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34675
2012-12-14 08:32:56 +00:00
2e2c88b625
ar71xx: reorder some patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34674
2012-12-14 07:16:56 +00:00
34411a0cbd
ar71xx: merge unifi outdoor patch into the ubnt-xm one
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34673
2012-12-14 07:16:50 +00:00
6c8efbfdc0
brcm47xx: Additional BCM4716 support
...
Additional BCM4716 support. Still needs working ethernet driver.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34672
2012-12-13 18:57:38 +00:00
6672d869da
brcm47xx: BCMA - Broadcom 2011 SDK Updates
...
I noticed these changes when reviewing the 2011 Broadcom SDK. I haven't
noticed any obvious changes in behavior with them applied; but thought I
should at least pass them on.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34670
2012-12-13 18:54:04 +00:00
97d22306da
brcm47xx: return the real irq number in bcma_core_irq
...
The irq signal numbers that are send by the cpu are increased by 2 from
the number programmed into the mips core by bcma.
Return the irq number on which the irqs are send in bcma_core_irq() now.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34669
2012-12-13 18:51:10 +00:00
6e4082f170
kernel: fix solos-pci skb double-free in DMA mode
...
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34667
2012-12-13 18:39:31 +00:00
321852348f
kernel: fix perf build with uclibc toolchains on x86
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34666
2012-12-13 17:34:22 +00:00
5e7d69554e
kernel/3.6: backport an upstream build for perf with uClibc
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34662
2012-12-13 15:40:27 +00:00
2bb7f82d8a
kernel: fix porting mistakes on the 3.6+ SIP NAT patch causing crashes
...
SVN-Revision: 34657
2012-12-13 13:07:13 +00:00
71712ec522
brcm47xx: this usb patch is not needed, the Broadcom SDK does it the other way.
...
SVN-Revision: 34655
2012-12-13 00:12:42 +00:00
5be97468f6
brcm47xx: use kernel 3.6.10 by default now
...
SVN-Revision: 34654
2012-12-13 00:11:55 +00:00
235c065e12
brcm47xx: suppress printing if a module was found in preinit function.
...
SVN-Revision: 34653
2012-12-13 00:11:11 +00:00
3a4a6cfd64
kernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
...
SVN-Revision: 34652
2012-12-13 00:09:55 +00:00
1bd8db0bd6
kernel: update bcma and ssb to master-2012-12-11-2 from wireless-testing
...
SVN-Revision: 34651
2012-12-12 22:42:18 +00:00
d085aad288
ar71xx: add profile and build initramfs image for the WNDR4300
...
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
dcdfcb75f0
ar71xx: add user-space support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34649
2012-12-12 16:49:51 +00:00
bc82db7d78
ar71xx: add kernel support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
75b71f4a74
ar71xx: add ap91_pci_init_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
d7cebac243
ar71xx: add ath79_wmac_register_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34645
2012-12-12 16:49:47 +00:00
ec26814b0e
ar71xx: refresh 3.3 patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34644
2012-12-12 16:49:46 +00:00
cdfc300948
ar71xx: remove superfluous USB patches for 3.3
...
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
eece71be56
generic: fix 8139cp patch for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34640
2012-12-12 08:37:27 +00:00
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
ed15c452a1
kernel: update to 3.7 final
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34626
2012-12-11 11:31:17 +00:00
aa2dc106c6
switch to 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34623
2012-12-10 21:06:10 +00:00
ff6116cbdf
add 3.6 kernel support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34622
2012-12-10 21:06:05 +00:00
17c76e5ca8
add sound feature
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34621
2012-12-10 21:05:48 +00:00
cbfca35c76
generic: backport a fix for the input keymap-matrix module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34620
2012-12-10 21:05:42 +00:00
87c8808ca5
keyboard driver depends on input-matrixkmap for 3.6+
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34619
2012-12-10 21:05:36 +00:00
5c28c5255f
generic: backport an upstream fix for building snd-soc-pcm as a module
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34617
2012-12-10 21:05:27 +00:00
f016b935d3
also list kmod-sound-core in the default packages
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34615
2012-12-10 21:05:11 +00:00
dfd718d13d
mac80211: ath9k: allow to load EEPROM data via firmware API
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34606
2012-12-10 15:46:15 +00:00
374a72411a
generic/kernel: add a fix for a common MIPS build failure.
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34602
2012-12-10 15:04:10 +00:00
c1c6a23f13
kernel/generic: refresh 3.7 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34601
2012-12-10 15:03:55 +00:00
0f90806014
kernel/generic: port r34599 over 3.7 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34600
2012-12-10 15:03:51 +00:00
67e85c0018
kernel/generic: fix build failure on missing uhci symbol
...
linux-3.6.8/drivers/usb/host/pci-quirks.c:471: undefined reference to
`uhci_check_and_reset_hc'
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34599
2012-12-10 14:24:28 +00:00
c2ae0ec02a
add support for Hauppauge Broadway
...
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform. It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
SVN-Revision: 34595
2012-12-10 14:13:01 +00:00
3cbc1a49e2
ar71xx: load ar934x_nfc driver earlier
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34589
2012-12-10 10:38:11 +00:00
1f7ae58a2c
ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
47f9b2a110
ar71xx: TP-LINK also has a family TL-WDR
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34577
2012-12-07 19:10:57 +00:00
d7ba2b4840
ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
...
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
deeeb5f671
create Linksys WRTU54G-TM profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34572
2012-12-07 18:02:31 +00:00
33f6c5ddb9
kernel: add missing USB configuration symbols after r34501
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34568
2012-12-07 11:01:53 +00:00
8236584b13
rename interrupt number constants
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34566
2012-12-06 22:41:14 +00:00
f1e4da0389
remove the now deprecated /proc/adm8668 interface
...
Proper gpiolib support is hooked instead.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34565
2012-12-06 22:41:09 +00:00
849662a8ec
add a gpiolib driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34564
2012-12-06 22:41:04 +00:00
78b235cfc3
do not reset WAN and LAN blocks
...
This is taken care of by the tulip driver accordingly.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34563
2012-12-06 22:40:58 +00:00
b3f36553cc
enable and advertise USB support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34562
2012-12-06 22:40:54 +00:00
a5aed4ec3a
add support for on-board EHCI controller
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34561
2012-12-06 22:40:49 +00:00
88f6bf64cf
remove the "old" tulip forked driver
...
We can now use the mainline tulip driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34559
2012-12-06 22:40:40 +00:00
40ab1facd2
use the tulip platform driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34558
2012-12-06 22:40:36 +00:00
445e77fdb5
patch the tulip driver to accept a platform variant
...
Isolate the PCI specific parts and group them under CONFIG_TULIP_PCI
CONFIG_TULIP_PLATFORM can be enabled for a platform style Tulip driver.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34557
2012-12-06 22:40:31 +00:00
b1f1381c27
move clock frequencies into clock driver
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34556
2012-12-06 22:40:26 +00:00
60663b12b2
add CONFIG_GPIO_PL061 config symbol
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34555
2012-12-06 22:40:21 +00:00
1232f91efb
replace the custom mtd driver with a partition parser
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34554
2012-12-06 22:40:17 +00:00
b516c8d89d
cleanup PCI controller code
...
At some point we should make the ADM5120 PCI controller driver a real
platform driver and share that one between the two targets.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34553
2012-12-06 22:40:12 +00:00
1ed763b888
cleanup and make interrupt code more robust
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34552
2012-12-06 22:40:02 +00:00
47ccbaaa91
remove frequency from /proc/cpuinfo
...
This is not the place to expose it and duplicates code reading the
system frequency.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34551
2012-12-06 22:39:57 +00:00
e37f6fb458
provide a system clock to be used by the MIPS timer
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34550
2012-12-06 22:39:52 +00:00
79c2ce01b7
get rid of the UART defines
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34549
2012-12-06 22:39:47 +00:00
afc2b07be1
get rid of the specific UART driver and use AMBA PL010
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34548
2012-12-06 22:39:43 +00:00
2dee2133c5
implement early_printk without an early_console
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34547
2012-12-06 22:39:33 +00:00
f85115efd8
simplify IRQ controller code
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34546
2012-12-06 22:39:27 +00:00
50303d52e2
use platform_add_devices
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34545
2012-12-06 22:39:22 +00:00
192c1e90bc
move time related functions to their own file
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34544
2012-12-06 22:39:18 +00:00
1f939889ca
move setup-related functions to their own file
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34543
2012-12-06 22:39:08 +00:00
abc03de599
kernel: add missing config symbols
...
SVN-Revision: 34532
2012-12-06 14:11:16 +00:00
a3843e7ec7
kernel 3.6+: nuke obsolete patches that are messing up oprofile builds
...
SVN-Revision: 34506
2012-12-05 16:49:48 +00:00
512baafc6b
kernel/3.3: move OHCI and EHCI platform drivers to generic
...
These patches are not specific to bcm47xx and will be used on other
platforms as well.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34501
2012-12-05 14:18:05 +00:00
822ee5053e
cns3xxx: fix dwc_otg driver compat with udc-core
...
function. This removes those from the dwc_otg driver and removes the patch
that comments out the linkage of udc-core so that the dwc_otg driver can
co-exist happily with other USB Device Controllers.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34475
2012-12-04 16:19:18 +00:00
fd0729f35c
cns3xxx: advertise pcie usb usbgadget features
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34474
2012-12-04 16:19:12 +00:00
d9d0814fc2
Fix Comtrend AR-5381u Power LED
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
d3cda51994
do no longer rename amba-pl010 serial devices names
...
Back in the days when we could not override /etc/inittab, it made a lot
of sense to rename ttyAM to ttyS since this was the only supported
serial device(s), we can now just put in an appropriate /etc/inittab file
now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34469
2012-12-03 16:18:40 +00:00
a7220cd9f8
kernel: disable more pci quirks to save space on platforms that don't need them
...
SVN-Revision: 34467
2012-12-03 10:33:47 +00:00
ec885796c0
kernel 3.6+: switch to a crc32 implementation that is more suitable for small caches. reduces kernel image size by ~22 KiB on mips
...
SVN-Revision: 34461
2012-12-02 18:37:41 +00:00
24b31c9428
kernel: fix stripping symbol exports
...
SVN-Revision: 34458
2012-12-02 17:42:17 +00:00
2ac9ac5163
brcm47xx: read sprom vars without prefix for boardrev and boardtype if the prefixed one is not available.
...
SVN-Revision: 34454
2012-12-02 16:11:39 +00:00
38d3b8d0ea
kernel: patch in a working copy of elf.h instead of using relative path based hackery in #include statements
...
SVN-Revision: 34449
2012-12-02 15:26:19 +00:00
e0e43655ce
ramips: fix serial console for Belkin F5D8235 v1/v2
...
Based on a patch from #12533 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34445
2012-12-02 14:16:12 +00:00
890f83dfb3
Update linux-atm fixes to reflect the final upstream pull request
...
[juhosg: refresh the patches with quilt]
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34443
2012-12-02 13:04:04 +00:00
476ea2bcb4
imagebuilder: use file_copy to deploy files/ in the image generation phase
...
SVN-Revision: 34439
2012-12-02 12:20:43 +00:00
4a1e2123eb
kernel: remove references to TARGET_ubicom32
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34431
2012-11-30 10:53:51 +00:00
527afd0e9a
remove target
...
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34430
2012-11-30 10:53:47 +00:00
c830644d97
remove Linux 3.3 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34426
2012-11-29 21:43:02 +00:00
763f780553
use a default kernel command-line to mount squashfs and jffs2
...
This fixes bug #9055 .
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34424
2012-11-29 21:42:53 +00:00
7cde0281f4
kernel: Fix 8139cp ring buffer initialisation, tx timeout recovery, add BQL
...
Patches queued upstream in net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34415
2012-11-29 17:58:28 +00:00
4f5defdc3b
ar71xx: switch to 3.6.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
ea17e36482
kernel: Update Geos to 3.6.8
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34411
2012-11-29 17:37:19 +00:00
543c2c27d1
kernel: Add ATM fixes pending upstream merge (queue reduction, race fixes)
...
Patches about to go into net-next.git
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34410
2012-11-29 17:37:18 +00:00
df6727639a
kernel: Add missing CONFIG_BATTERY_DS2781 option to generic 3.6 config
...
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34409
2012-11-29 17:37:16 +00:00
44131bd785
ramips: rt305x: add profile and build image for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34407
2012-11-29 17:37:14 +00:00
d3994b7408
ramips: rt305x: add user-space support for the Asus RT-N13U
...
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34406
2012-11-29 17:37:13 +00:00
0ec59e6235
ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router
...
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.
* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c
[juhosg: move user-space support and image generation into separate
patches]
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34405
2012-11-29 17:37:11 +00:00
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
ee16e144bb
use physmap-flash part_probe_types
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34398
2012-11-27 18:42:49 +00:00
0588d13a3e
Fix typo in 96338GW power LED.
...
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
dd852e242d
add AudioCodes AC495 SoC
...
Found in the AudioCodes Tulip AC494 ATA.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34395
2012-11-27 18:42:39 +00:00
d59ba20030
do not call clk_put() on the timer clock
...
We don't support disabling the clock, but this is actually what it would do.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34394
2012-11-27 18:42:36 +00:00
5d6208f34d
do not list specific board compatible strings
...
The general practice is to use the general SoC compatible string in both the
DTS and the board specific .c file.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34393
2012-11-27 18:42:32 +00:00
94b7be6dd7
remove unused variables from Makefile.boot
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34392
2012-11-27 18:42:28 +00:00
efd00e6240
brcm47xx: fix title of Bcm4705-wl profile
...
SVN-Revision: 34378
2012-11-25 16:41:00 +00:00
a3d976aff5
brcm47xx: add profile for bcm4705 with wl driver
...
SVN-Revision: 34336
2012-11-25 16:15:27 +00:00
57b7879a4e
ramips: ramips_eth: use Kconfig definition to enable debug
...
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34332
2012-11-25 14:25:54 +00:00
21d5df8700
ramips: add DIR-615 D userspace support
...
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.
An IRC user reported these changes allowed him to use wifi on his hardware.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34331
2012-11-25 14:25:27 +00:00
608efcdbd0
kernel: add CONFIG_BCMA_POSSIBLE=y to generic config as it is set in most of the target configs.
...
SVN-Revision: 34330
2012-11-25 14:14:17 +00:00
aa8e887a46
brcm47xx: whitespace cleanups
...
SVN-Revision: 34329
2012-11-25 14:03:51 +00:00
be77f9951c
brcm47xx: fix cpu clock detection on ASUS WL-520gU
...
The ASUS WL-520gU and some other similar Asus devices have a BCM5354
running at 200MHZ and not at 240 which is the default for this SoC.
This fixes #4083 .
SVN-Revision: 34325
2012-11-24 20:28:06 +00:00
264873b3c5
brcm47xx: watchdog: deactivate NOWAYOUT.
...
In the old configuration the SoC issued a reboot if the watchdog was
killed also if it was kill with TERM and not KILL.
This will fix #11724 .
SVN-Revision: 34324
2012-11-24 20:24:27 +00:00
c62d86ecb8
brcm47xx: update watchdog driver
...
This watchdog driver should work with SoC having a PMU.
This fixes #11720 .
SVN-Revision: 34323
2012-11-24 20:07:25 +00:00
60e0e0d6e6
bcm63xx: Add a fixup for rt2x00 devices.
...
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
746b4cec06
bcm63xx: Enable LED pin support for ath9k pci fixup.
...
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
1baeede939
bcm63xx: fix spi transfer handling
...
* Accept transfers without bits_per_word set.
* Work around the inability of the hardware of keeping CS asserted.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
b0b994cf76
ar71xx: set pad6 cfg for AR8327 on the AP136 board
...
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
49d4b5581d
generic: ar8216: set delay values for SGMII mode on AR8327
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34315
2012-11-23 20:55:26 +00:00
6b63716262
add preliminary support for musl
...
Musl is an alternative C-library, see http://www.musl-libc.org for more infos.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34314
2012-11-23 20:02:29 +00:00
b73f22de1e
imagebuilder: merge r25078 to align files/ handling with current buildroot
...
SVN-Revision: 34301
2012-11-22 19:46:54 +00:00
3205b52d1c
generic: ar8216: introduce ar8216_mib_op helper
...
The ar8216_mib_{capture,flush} functions are similar.
Move the common code into a helper and use that from
the original functions.
This change also fixes a lockdep warning in
ar8216_mib_flush.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34297
2012-11-22 10:33:03 +00:00
10d30f2d2d
swconfig: make it compatible with 3.7
...
swconfig does not compile with 3.7 because
struct netlink_notify->pid has been renamed to
struct netlink_notify->portid
and
struct genl_info->snd_pid has been renamed to
struct genl_info->snd_portid
Use the new names and add compatibility patches
to 3.3 and 3.6.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34288
2012-11-21 17:38:11 +00:00
f7ead0a2d5
adds proper package selection for dgn3500
...
SVN-Revision: 34286
2012-11-21 06:06:48 +00:00
e20a0baa04
cns21xx: add support for 3.6
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34285
2012-11-20 21:37:53 +00:00
5c740aa23c
generic: add some missing symbols for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34284
2012-11-20 21:34:43 +00:00
2a792f32b5
generic: ar8216: fix port number check in 'ar8xxx_mib_work_func'
...
Also add a WARN_ON to 'ar8216_mib_fetch_port_stat'
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34283
2012-11-20 20:40:04 +00:00
258b2f2dc2
generic: ar8216: remove an unblanced mutex_unlock call
...
Fixes the following warning:
[ 94.080000]
[ 94.080000] =====================================
[ 94.080000] [ BUG: bad unlock balance detected! ]
[ 94.080000] 3.3.8 #2 Tainted: G O
[ 94.080000] -------------------------------------
[ 94.080000] swconfig/1220 is trying to release lock (&priv->mib_lock) at:
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] but there are no more locks to release!
[ 94.080000]
[ 94.080000] other info that might help us debug this:
[ 94.080000] 2 locks held by swconfig/1220:
[ 94.080000] #0 : (genl_mutex){+.+...}, at: [<80222430>] genl_rcv+0x14/0x34
[ 94.080000] #1 : (&dev->sw_mutex){+.+...}, at: [<801da018>] swconfig_get_dev+0x88/0xb4
[ 94.080000]
[ 94.080000] stack backtrace:
[ 94.080000] Call Trace:
[ 94.080000] [<8028dc58>] dump_stack+0x8/0x34
[ 94.080000] [<800a5128>] print_unlock_inbalance_bug+0xe0/0xfc
[ 94.080000] [<800a82c0>] lock_release+0x18c/0x1c8
[ 94.080000] [<80292074>] __mutex_unlock_slowpath+0xd8/0x17c
[ 94.080000] [<801df8f4>] ar8216_sw_get_port_mib+0x138/0x16c
[ 94.080000] [<801db688>] swconfig_get_attr+0xbc/0x394
[ 94.080000] [<8022261c>] genl_rcv_msg+0x1cc/0x214
[ 94.080000] [<80221a18>] netlink_rcv_skb+0x6c/0xe8
[ 94.080000] [<80222440>] genl_rcv+0x24/0x34
[ 94.080000] [<80221370>] netlink_unicast+0x15c/0x22c
[ 94.080000] [<8022175c>] netlink_sendmsg+0x240/0x2d0
[ 94.080000] [<801ef544>] sock_sendmsg+0x84/0x9c
[ 94.080000] [<801f0648>] __sys_sendmsg+0x1cc/0x270
[ 94.080000] [<801f207c>] sys_sendmsg+0x48/0x7c
[ 94.080000] [<8006ad78>] stack_done+0x20/0x40
[ 94.080000]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34282
2012-11-20 20:40:03 +00:00
82b57b0c28
generic: ar8216: add missing locking calls
...
Fixes the following lockdep warning:
[ 19.160000] ------------[ cut here ]------------
[ 19.160000] WARNING: at drivers/net/phy/ar8216.c:322 ar8216_rmw+0x54/0xa4()
[ 19.170000] Modules linked in: nf_defrag_ipv4 nf_conntrack ehci_hcd
sd_mod pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment xt_multip
ort xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp
x_tables ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) at
h9k_hw(O) ath(O) mac80211(O) usbcore usb_common scsi_mod nls_base crc7
crc_itu_t crc_ccitt cfg80211(O) compat(O) arc4 aes_generic cry
pto_blkcipher cryptomgr aead crypto_hash crypto_algapi ledtrig_timer
ledtrig_default_on leds_gpio gpio_button_hotplug(O)
[ 19.210000] Call Trace:
[ 19.220000] [<8028dc38>] dump_stack+0x8/0x34
[ 19.220000] [<80072da0>] warn_slowpath_common+0x78/0xa4
[ 19.230000] [<80072de4>] warn_slowpath_null+0x18/0x24
[ 19.230000] [<801de820>] ar8216_rmw+0x54/0xa4
[ 19.240000] [<801df460>] ar8216_mib_capture+0x70/0xd0
[ 19.240000] [<801df944>] ar8xxx_mib_work_func+0x34/0x98
[ 19.250000] [<80089a7c>] process_one_work+0x28c/0x460
[ 19.250000] [<8008a630>] worker_thread+0x22c/0x334
[ 19.260000] [<8008e544>] kthread+0x88/0x90
[ 19.260000] [<80065020>] kernel_thread_helper+0x10/0x18
[ 19.270000]
[ 19.270000] ---[ end trace 22e9d696adfa6a08 ]---
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34281
2012-11-20 20:40:00 +00:00
c0f73ac607
generic: convert yaffs to use kuid_t and kgid_t on 3.6+
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34280
2012-11-20 17:45:24 +00:00
188908e885
ar71xx: make rb750_nand driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
8194237789
ar71xx: make ar934x_nfc driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
4468fd7ae4
ar71xx: refresh rb4xx_nand patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
46a3b818b9
ar71xx: remove buffer verification reference from rb4xx_nand.c
...
It is a dead code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34276
2012-11-20 14:40:22 +00:00
674b91ce0e
ar71xx: fix GPIO function selection for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
d833ca527d
ar71xx: restore rb4xx kernel partition size to the original value
...
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
33a99ce46b
ar71xx: install lzma compressed elf kernel image from wget2nand
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
68b5aa2fdf
ar71xx/image: provide lzma compressed elf kernel image
...
This will be used on the RB4xx/RB7xx/RB2011 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
97867f8717
ar71xx/image: relink loader.elf image to LOADADDR
...
This allows to load the resulting image directly
from RouterBOOT.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
dd092fd10c
ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34270
2012-11-20 07:19:10 +00:00
6c1fbb2d5c
mac80211/rt2x00: add rf_vals for Rt3352 with Xtal=20MHz
...
[juhosg: move ramips specific stuff into a followup patch]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34269
2012-11-20 07:19:09 +00:00
8e4cefc7f8
refresh all kernel configurations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
8dc72c5c4d
Revert "target specific patches have nothing to do in generic.."
...
This reverts commit r34230, as it is causing build failures:
make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1
Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.
SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
4c043300fc
fix 820-usb_add_usb_find_device_by_name.patch
...
SVN-Revision: 34254
2012-11-19 10:56:09 +00:00
4fa5781a95
kernel: refresh patches
...
SVN-Revision: 34253
2012-11-18 21:40:30 +00:00
86cc79ac98
brcm47xx: add support for kernel 3.6
...
This is based on the patch by Peter Wagner.
SVN-Revision: 34252
2012-11-18 21:27:00 +00:00
db763080f4
kernel: add missing generic config options for 3.6+
...
SVN-Revision: 34250
2012-11-18 20:54:53 +00:00
c159c7a462
kernel: add CONFIG_XZ_DEC=y to generic
...
CONFIG_SQUASHFS_XZ selects CONFIG_XZ_DEC so this could also be moved.
SVN-Revision: 34249
2012-11-18 20:48:53 +00:00
d577d69838
ar71xx: use custom LZMA dictionary size for WNDR3700 images
...
Based on a patch by Hannu Nyman.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
935ca3f3eb
add 3.7-rc6 support (patch 820 still has to be fixed)
...
SVN-Revision: 34247
2012-11-18 18:52:38 +00:00
863657d040
generic: ar8216: add MIB counter support for the AR8216 switch as well
...
Thanks to Jonas Gorski for the reference URL.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34245
2012-11-18 16:21:00 +00:00
98f30aac8e
generic: ar8216: rename AR8216_*_STATS_* defines
...
The names are misleading, those are only valid from
AR8236. The AR8216 chip uses different offsets.
Thanks to Jonas Gorski for the report.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34244
2012-11-18 16:20:56 +00:00
9abd8cd004
generic ar8216: allow to read/reset MIB counters via swconfig
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34243
2012-11-18 12:26:35 +00:00
4b17323b51
generic: ar8216: use dynamically allocated private data in ar8216_probe
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34242
2012-11-18 12:26:34 +00:00
169e596268
ar71xx: add user-space support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
d44d954dec
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
d62bddc620
ar71xx: update PCI IRQ map for RB4xx devices
...
Should fix #12269 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
31881357af
ar71xx: create profile and build image for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
9da2c85b67
ar71xx: enable sysupgrade for the OpenMesh MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
6380301d01
ar71xx: rename om2p.sh upgrade script to openmesh.sh
...
It will be used on other boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
d325e622d2
scripts/om-fwupgradecfg-gen.sh: add support for the MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
c3174179b7
ar71xx: add user-space support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
8d4857d677
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
b220071cd2
target specific patches have nothing to do in generic..
...
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
c90128ce31
generic: remove temporary config file introduced in r34227
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34229
2012-11-18 08:51:56 +00:00
ff1e854511
kernel: update linux 3.6 to 3.6.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
a4c205011b
move patches to patches-2.6.36
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34220
2012-11-16 16:32:55 +00:00
974b9f5c9a
remove broken flag
...
The SPARC qemu target works like a charm with the following qemu command-line:
qemu-system-sparc64 -M sun4u -L /home/florian/dev/qemu/pc-bios -kernel build_dir/linux-sparc/linux-3.6.6/vmlinux -nographic
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34219
2012-11-16 16:32:52 +00:00
5261a171e9
update to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34218
2012-11-16 16:32:49 +00:00
7e199fcc06
add missing framebuffer config symbol
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34217
2012-11-16 16:32:45 +00:00
b7f2f14801
advertise jffs2, squashfs and ext4 features
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34216
2012-11-16 16:32:42 +00:00
c6d9304d17
resync kernel configuration with 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34215
2012-11-16 16:32:39 +00:00
dd70319e6d
build root filesystems and install them in $(BIN_DIR)
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34214
2012-11-16 16:32:36 +00:00
8ad0b56ba5
do not build crashlog on sparc too
...
This is crashing the kernel in crashlog_init_fs(), until fixed, disable it
for SPARC too.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34213
2012-11-16 16:32:33 +00:00
19811eddb4
switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34212
2012-11-16 16:32:29 +00:00
f98ac68e0e
add support for 3.6 kernel
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34211
2012-11-16 16:32:26 +00:00
c555479127
move acx-mac80211 to the ar7 generic target
...
None of the AC49x boards that we support actually have Wi-Fi.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34208
2012-11-16 13:00:55 +00:00
b763d47bfe
3.6: add some framebuffer related config symbols
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34207
2012-11-16 13:00:51 +00:00
bc73cf5345
push atm, br2684ctl and kmod-pppoa down the DSL Profile
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34206
2012-11-16 13:00:48 +00:00
485f9573f8
brcm47xx: revert r33935: check for .ELF header in partition parser
...
For sysupgrade the generic image should be used and the special image for the wgt634u is just needed for initial flashing over CFE.
russell reported that with this patch sysupgrdae did not worked for him any more and he could not reproduce the error described in #11420 .
With the patch the linux partition also contained the loader which is in the first 128KB.
SVN-Revision: 34201
2012-11-15 16:39:45 +00:00
7da001d068
scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
...
It will be used for non OM2P boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
ee94ed4597
ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
9c5c079329
ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34197
2012-11-13 20:57:18 +00:00
75c1d3ccc2
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
7ab0e1566f
ar71xx: add profiles and build images for old PowerCloud System devices
...
[juhosg:
- use 'PowerCloud Systems' instead of 'PCS' in the profiles
- sort SingleProfile instances in image/Makefile]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34195
2012-11-13 20:57:15 +00:00
f6c3a8ddd6
generic: refresh 3.6 patches
...
SVN-Revision: 34194
2012-11-13 20:57:13 +00:00
e7f77f2742
fix badly named patch file
...
SVN-Revision: 34193
2012-11-13 17:39:44 +00:00
857456aef8
switch to kernel 3.6.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34192
2012-11-13 17:20:19 +00:00
390b8eb864
fix CBUS UART registration
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34191
2012-11-13 17:20:14 +00:00
62c8ff19ad
ar71xx: add profile and build image for the TL-WA7510N board
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34190
2012-11-13 14:48:03 +00:00
165b7d2173
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34188
2012-11-13 14:48:01 +00:00
91bab828aa
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
ce9d4fadfa
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
3b419e506c
fixes ar9 / dgn3500 support
...
SVN-Revision: 34180
2012-11-13 08:54:14 +00:00
dd8c625424
previous commit pushed 1 file too many ;)
...
SVN-Revision: 34179
2012-11-12 21:36:23 +00:00
ced0cf3a94
move ethernet hw init to init/uninit functions
...
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.
SVN-Revision: 34177
2012-11-12 21:35:01 +00:00
31541f81c3
brcm47xx: remove double definition of kmod-tg3 added in r34150
...
SVN-Revision: 34176
2012-11-12 21:34:00 +00:00
bac93bdd8e
brcm47xx: fix cfe config detection on WGT634U broken in r33920
...
Thanks Russell Senior for reporting this.
SVN-Revision: 34175
2012-11-12 21:32:33 +00:00
00243027dd
cns3xxx: merge gpio patches
...
SVN-Revision: 34174
2012-11-12 19:27:30 +00:00
fb9b572f0a
cns3xxx: fix build failure after r34168
...
SVN-Revision: 34173
2012-11-12 19:27:29 +00:00
a8c492dbb3
MIPS: add a build fix for arch/mips/boot/compressed/decompress.c
...
And get rid of the AR7 patch because at least the Alchemy SoC also needs it
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34170
2012-11-12 12:49:47 +00:00
5cddb170cd
reorder, rename and refresh patches
...
SVN-Revision: 34169
2012-11-12 09:18:00 +00:00
77504ac06f
split spi patch, follow mainline file naming
...
SVN-Revision: 34168
2012-11-12 08:22:14 +00:00
9a780e0328
split the i2c patch, merge the retry fixup
...
SVN-Revision: 34167
2012-11-12 08:21:38 +00:00
5f30fe31b6
move redboot boardconfig patch into target folder
...
SVN-Revision: 34166
2012-11-12 07:56:37 +00:00
527c473674
add support for the Tonze AP-422/425
...
SVN-Revision: 34165
2012-11-11 21:04:30 +00:00
ee9e3bf82e
refresh patch
...
SVN-Revision: 34164
2012-11-11 21:03:52 +00:00
dcfd6cd5a4
generate single images for tftp flashing as well as sysupgrade images for boards with old u-boot
...
SVN-Revision: 34163
2012-11-11 20:57:04 +00:00
16275bdd15
cns3xxx: convert dwc_otg patches to files
...
SVN-Revision: 34162
2012-11-11 20:03:58 +00:00
e38adfc912
cns3xxx: convert ethernet patches to files
...
SVN-Revision: 34161
2012-11-11 20:03:56 +00:00
306894b88f
bcm63xx: switch to 3.6.6
...
SVN-Revision: 34160
2012-11-11 19:57:17 +00:00
4658e463d9
move fixed mapping of internal devices into vmalloc region
...
SVN-Revision: 34158
2012-11-11 19:29:27 +00:00
9760644af4
advertise squashfs feature
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34157
2012-11-11 19:26:54 +00:00
dd541cbefa
add support for Linux 3.6
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34156
2012-11-11 19:26:50 +00:00
f7fcb3c845
split kernel config between generic, au1500 and au1550
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34155
2012-11-11 19:26:44 +00:00
b363a7e491
add support for Linux 3.6
...
SVN-Revision: 34154
2012-11-11 18:41:09 +00:00
854c504781
move files directory to files-3.3
...
SVN-Revision: 34153
2012-11-11 18:40:48 +00:00
cadd36a303
brcm47xx: remove ssb-gige package
...
CONFIG_SSB_DRIVER_GIGE is set in the target config of the brcm47xx target, so it will always be activated and the kmod-ssb-gige is not needed any more.
The kmod-ssb-gige package is not generated in an build as it does not contain any files and the makes the image builder fail when generating a image integrating this package.
SVN-Revision: 34150
2012-11-11 17:30:33 +00:00
62c9156af6
generate image for AC49x
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34149
2012-11-11 16:11:39 +00:00
9c7d221d47
create AC49x subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34148
2012-11-11 16:11:34 +00:00
668234c109
create generic subtarget
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34147
2012-11-11 16:11:29 +00:00
4891549bcd
detect AC49x flash partitions
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34146
2012-11-11 16:11:22 +00:00
feb968d964
support AC49x bootloader environment
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34145
2012-11-11 16:11:14 +00:00
7d09c61d65
add AudioCodes AC49x platform support to kernel
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34144
2012-11-11 16:11:09 +00:00
d9b89db380
free memory below kernel offset
...
Some bootloaders (e.g. PSPBoot on AC49x) have a load-offset, this frees that
memory region so it is usable for Linux.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 34143
2012-11-11 16:11:00 +00:00
298a8e2300
x86/generic: don't disable usbfs ( #12452 )
...
SVN-Revision: 34139
2012-11-10 23:28:58 +00:00
c54fa281b1
bcm63xx: fix compilation with kmod-ohci enabled with 3.6
...
Fixes the following error:
drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]
Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 34138
2012-11-10 22:10:47 +00:00
15519bec9c
bcm63xx: add two missing usb patches to 3.6
...
SVN-Revision: 34137
2012-11-10 19:59:16 +00:00
06ad6ffe16
bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
...
SVN-Revision: 34136
2012-11-10 19:59:07 +00:00
f3f3f52259
cns3xxx: clean up pcie patches
...
Combine two pcie patches (2nd patch undid the 1st patch) together
and refresh the other affected patches
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 34132
2012-11-09 21:37:54 +00:00
71ddec8091
add more profiles
...
SVN-Revision: 34131
2012-11-09 19:26:58 +00:00
Felix Fietkau
Hauke Mehrtens
Gabor Juhos
Florian Fainelli
Jonas Gorski
Jo-Philipp Wich
Imre Kaloz
John Crispin
Mirko Vogt
Luka Perkov