10972d9f02
mac80211: add missing set_default to fix stray "radio0: sh: bad number" messages
...
SVN-Revision: 39028
2013-12-10 16:24:52 +00:00
32223b3c4d
hostapd: fix short_preamble option
...
SVN-Revision: 39027
2013-12-10 16:24:48 +00:00
d24434db0a
libevent2: Configure with --disable-debug-mode
...
Saves around 10K.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 39025
2013-12-09 18:26:58 +00:00
67e71176cb
ubox: fix logging support. the initial connect failed
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39024
2013-12-09 18:24:30 +00:00
dda5dfb765
procd: update procd, add ulimit support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39023
2013-12-09 17:38:19 +00:00
e231f82cc0
ubox: fix up pidcount handling inside log.init
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39022
2013-12-09 17:29:44 +00:00
bc76dec31f
gpio-button-hotplug: add irq mode to driver
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39021
2013-12-09 17:29:39 +00:00
31a2912cd9
netifd: enable coredumps again
...
got broken due procd startup. Requires procd resource limit patch.
Signed-off-by: Ulrich Weber <uw@xyne.com>
SVN-Revision: 39020
2013-12-09 17:29:34 +00:00
0ef939c93b
ralink: add TSO
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39019
2013-12-09 17:29:29 +00:00
09a933ed73
ralink: fix typo in gpio irq handling
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39018
2013-12-09 17:29:24 +00:00
a65c9e5b20
ralink: add mt7620a gdma info to dtsi
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39017
2013-12-09 17:29:19 +00:00
d203784841
ralink: add asoc modules
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39016
2013-12-09 17:29:14 +00:00
be10895651
ralink: add partially working asoc driver. codec is not fully functional yet
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39015
2013-12-09 17:29:08 +00:00
231eca9375
ralink: add helper that identifies the mt7620 ECO
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39014
2013-12-09 17:29:03 +00:00
833943b410
ralink: add dma engine support
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39013
2013-12-09 17:28:43 +00:00
c8753ca97c
imx6: add support for GW53xx
...
The Gateworks GW53xx family of products is based on the Freescale
i.MX6DL SoC and offers a small form-factor with peripherals such as:
* i.MX6DL
* NAND FLASH
* 4x PCIe
* 4x USB EHCI (1x front-panel; 3x PCIe sockets)
* 1x USB OTG
* 1x uSD
* LVDS connector (VLDS for display, PWM/GPIO for backlight, i2c for touch)
* HDMI Audio/Video out
* Analog Video in
* Digital IO
* Gateworks System Controller
* Accelerometer
* Canbus
* Optional GPS
* Industrial temp (-40C to +85C)
* DC input voltage 8 to 42V (Passive PoE and 802.3af)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39012
2013-12-09 11:30:23 +00:00
7523aa05c1
imx6: add DMA/SDMA support for 3.12
...
DMA and SDMA support are needed for ssi based audio. Note that the sdma
firmware is no longer required for ssi audio.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39011
2013-12-09 11:30:22 +00:00
c9ee51ad38
imx6: drop upstreamed patch
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39010
2013-12-09 11:30:20 +00:00
47d1215dc7
kernel: added defines for 3.12
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39009
2013-12-09 11:30:19 +00:00
98009790c6
kernel: module updates for 3.12
...
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 39008
2013-12-09 11:30:18 +00:00
ef5e13325e
config: add KERNEL_DYNAMIC_DEBUG option
...
Useful when debugging kernel which uses this infrastructure, for
example ubi/ubifs.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39007
2013-12-09 11:30:16 +00:00
3ceb6b3274
base-files: fix whitespaces
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39006
2013-12-09 11:30:14 +00:00
18dd101903
hostapd: properly parse wmm and hidden uci options ( #14589 )
...
SVN-Revision: 39005
2013-12-08 20:51:21 +00:00
6242255df2
netifd: update to the latest version, adds tunnel fixes by Hans Dedecker and adds back support for multiple networks per wifi-iface
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39004
2013-12-08 18:00:05 +00:00
be0395261b
mac80211: fix using custom wifi-iface ifname option with netifd
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39003
2013-12-08 18:00:01 +00:00
f56030265d
mac80211: merge an ibss dfs locking fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39002
2013-12-08 14:48:34 +00:00
7a260c3620
ath9k: merge initval and tx gain table updates, calibration fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39001
2013-12-08 14:48:30 +00:00
1c1d5fac2e
mac80211: refresh patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39000
2013-12-08 14:48:25 +00:00
7d725aab9a
generic: workaround arptables arpt_arp structure padding issue ( #14577 )
...
Linaro GCC 4.6-2013.05 incorrectly pads the arpt_arp structure on
at least the ar71xx target, resulting in a two bytes shorter struct
in the kernel compared to what arptables userspace expects.
When comparing sizeof(struct arpt_arp) in kernel and userspace, the
former yields 162 byte, while the latter is 164 byte.
As a consequence, the subsequent target_offset and next_offset
members of the parent arpt_entry structure contain invalid values
when processed by the arptables binary, leading to bad memory
accesses in the populate_cache() procedure, subsequently causing a
segfault.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38999
2013-12-06 15:42:35 +00:00
21ee73c920
generic: fix occasional "execvp: /bin/sh: Argument list too long" is kernel header install phase ( #12907 )
...
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38998
2013-12-06 15:37:55 +00:00
48b4988e55
add support for the wl18xx, split wlcore from wl12xx
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38997
2013-12-06 14:07:13 +00:00
4bdd40c08b
odhcpd/6c: Add config menu for prefix class ext.
...
SVN-Revision: 38996
2013-12-05 12:17:09 +00:00
95065c08b0
ath9k: fix length handling of unaggregated frames (might resolve some rts/cts issues)
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38995
2013-12-04 22:59:36 +00:00
fb6ebac74a
odhcpd: Fix ubus integration
...
SVN-Revision: 38994
2013-12-04 13:14:27 +00:00
ee2cd0354c
mac80211: fix ad-hoc network setup with netifd ( #14564 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38993
2013-12-03 16:22:56 +00:00
4155016637
netifd: update to the latest version, improves wireless status output and fixes some bridge handling issues
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38992
2013-12-03 14:17:44 +00:00
603c532eed
hostapd: fix maclist processing with netifd
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38991
2013-12-03 09:02:58 +00:00
6e0fafd816
wifi: restart netifd wifi interfaces on the "up" command like the old variant
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38990
2013-12-02 16:53:27 +00:00
3c50feca19
wifi: rename the "reload" (restarting non-netifd wifi) command to "reload_legacy"
...
Add a new "reload" command that reloads the netifd config as well
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38989
2013-12-02 16:53:24 +00:00
498d84fc4e
netifd: add wireless configuration support and port mac80211 to the new framework
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38988
2013-12-02 16:41:03 +00:00
c9902e141e
uci: update to the latest version, adds a small uci_to_blob fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38987
2013-12-02 13:08:17 +00:00
a26242cb63
hostapd: change the wildcard for the hostapd control socket directory
...
prepare for using /var/run/hostapd instead of /var/run/hostapd-phy*
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38986
2013-12-02 13:08:14 +00:00
9381eaccb3
wpa_supplicant: clean up hostapd control socket on exit to fix socket leak in ap+sta mode on wifi restarts
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38985
2013-12-02 13:08:11 +00:00
6960ae4e65
hostapd: fix os_daemonize vs starting process race by creating the pid file in the parent
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38984
2013-12-02 13:08:08 +00:00
0d557b5fc4
libubox: update to latest version, adds some more jshn performance improvements and fixes
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38983
2013-12-02 13:08:03 +00:00
107bcb5de3
netifd: remove redundant calls to /sbin/wifi down
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38982
2013-12-02 13:08:00 +00:00
5022b3949a
hostapd: always include p2p options in wpa_cli
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38981
2013-12-02 13:07:46 +00:00
94f7ae90f8
brcm47xx: misc cleanups
...
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38980
2013-12-01 18:12:57 +00:00
c48f285147
brcm47xx: deactivate mips wait instruction only for BCM4706
...
The wait instruction is only broken on the BCM4706 and not on the other
similar SoCs.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38979
2013-12-01 18:05:08 +00:00
cbbfc5f1e6
brcm47xx: config: set CONFIG_HZ=100 and CONFIG_IP_ROUTE_VERBOSE
...
This sets both values to the OpenWrt default values. There is no reason
to use some brcm47xx specific values here.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38978
2013-12-01 17:34:27 +00:00
Jo-Philipp Wich
John Crispin
Luka Perkov
Felix Fietkau
Imre Kaloz
Steven Barth
Hauke Mehrtens