1b0318158d
Reinstate rdc bootability and force it to use init=/etc/preinit, thus the remove the hackish SetInitramfs actions
...
SVN-Revision: 12136
2008-08-05 13:42:36 +00:00
180526a910
Put the files created by the lzma decompressor patch in the files/ directory. Add some early_printk debugging to the lzma decompressor to help track down problems when upgrading from one kernel version to another
...
SVN-Revision: 11627
2008-07-03 11:09:37 +00:00
310c6108cd
Put back 2.6.24 files as well
...
SVN-Revision: 11593
2008-06-28 11:07:07 +00:00
9e151671a9
Put back 2.6.23 files for rdc, allowing to switch from one kernel version to another for testing
...
SVN-Revision: 11592
2008-06-28 11:06:32 +00:00
0d40a2f95b
his patch mainly fixes the huge delay when we ping from the RDC device to another host (160-230 ms). r6040_rx() was rewritten. Further changes: - fix a bug in hex2str(), which overwrote the source with a zero - removed rx_free_desc counter; allocate skb inside r6040_rx() on the fly - r6040_rx: don't take the error from the MLSR register (may be too late) but from the descriptor (we may have to allow these errors (via MCR0) there - r6040_alloc_rxbufs() may fail due to lack of skb, added a return value - changed some debugs - more defines - version: 0.18 -> 0.19
...
Signed-Off by Joerg Albert <jal2@gmx.de>
SVN-Revision: 11508
2008-06-16 13:25:14 +00:00
01e594e704
This patch applies to the RDC 32xx ethernet driver (svn r10754, first patch applied) and fixes the following issues: - re-added the parent parameter to specify a netdevice to steal the MAC address from (optional). - fixed null pointer access in r6040_rx() (lp->dev init. was missing) - fixed "scheduling while atomic" endless loop if tx_timeout() was called (caused by the re-allocs of the buffers) - fixed tx timeouts (tx irq weren't re-enabled on rx irq)
...
It adds some defines and cleans the code a bit (IMHO).
Signed-Off by Joerg Albert <jal2@gmx.de>
SVN-Revision: 11507
2008-06-16 13:24:41 +00:00
368f07fc97
Hi,
...
this is the first of three patches to fix the ethernet driver of RDC R32xx applied to svn r10754.
It adds debugs and make some procedures (r6040_*) global symbols in order to help with debugging kernel oops. Version is increased from 0.16 to 0.18 to avoid conflicts with the driver variant metioned in the X-WRT forum (call 0.17.3) Tested on a Sitecom WL-153.
Signed-Off-By: Joerg Albert <jal2@gmx.de>
SVN-Revision: 11506
2008-06-16 13:24:09 +00:00
23d1a5bd88
Use 2.6.25 for rdc321x
...
SVN-Revision: 11439
2008-06-11 16:38:37 +00:00
ef62f5f24d
Use an update r6040 driver
...
SVN-Revision: 10754
2008-04-07 07:50:45 +00:00
c592ef61b3
Upgrade rdc to 2.6.24
...
SVN-Revision: 10453
2008-02-13 14:35:18 +00:00
e22d12ddfc
Add support for the gpio connected reset button
...
SVN-Revision: 10173
2008-01-11 15:19:13 +00:00
e9d7dc5803
Resync kernel config, do not enable the setup file
...
SVN-Revision: 9329
2007-10-15 17:26:27 +00:00
f61a627092
Typo on PCI ids
...
SVN-Revision: 9328
2007-10-15 17:04:34 +00:00
9dc51096e6
Add the RDC PCI ids for a fancier PCI device table.Return the system name on boot.
...
SVN-Revision: 9327
2007-10-15 16:13:25 +00:00
4bc640743a
Upgrade rdc to 2.6.23, fix the r6040 driver printk's
...
SVN-Revision: 9267
2007-10-12 11:21:59 +00:00
e54eec19b7
Clean up the r6040 driver using checkpatch
...
SVN-Revision: 9184
2007-10-08 08:01:30 +00:00
9a6b4fa7da
Led is not active low by default, register the watchdog
...
SVN-Revision: 9138
2007-10-05 13:50:21 +00:00
db7bf6f616
Rewrite platform code to be smarter
...
SVN-Revision: 9094
2007-10-02 14:23:27 +00:00
8c612a1cdb
Add support for the D-Link DIR-450, thanks to Macpaul Lin !
...
SVN-Revision: 8790
2007-09-16 10:57:29 +00:00
56231056ea
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
SVN-Revision: 8653
2007-09-06 16:27:37 +00:00
Florian Fainelli
Felix Fietkau