Commit Graph

29215 Commits (5e111b0330e56b24f13e8b0fd7bf054609bd38f7)

Author SHA1 Message Date
Zoltan Herpai 7f707a5216 sunxi: update devtree name in network setup for pcduino3 as preparing for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43149
2014-11-02 10:11:36 +00:00
Hauke Mehrtens adbb5ad195 bcm53xx: bcma: get IRQs also from device tree
Add patches for getting the IRQ number for a device of the bcma bus
that were send for upstream inclusion.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43148
2014-11-01 15:57:30 +00:00
Steven Barth 16ef92770b procd: revert some changes breaking console on UML
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43147
2014-11-01 14:01:02 +00:00
Hauke Mehrtens 6e6dffbe81 bcm53xx: set customized AUXCTL
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43146
2014-11-01 13:58:18 +00:00
Hauke Mehrtens 5e13e40591 bcm53xx: activate early printk
This makes it possible to activate early printk.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43145
2014-11-01 13:57:50 +00:00
Hauke Mehrtens 8e20cceeae bcm53xx: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43144
2014-11-01 13:55:02 +00:00
Jo-Philipp Wich bc356cef82 ppp: support adaptive LCP echos
Port Debians adaptive LCP echo patch to pppd, make it configurable with UCI
and enable it by default.

When adaptive LCP echo is enabled, LCP echo requests are only sent if the
link is idle, this avoids the common situation where a congested PPP link
(e.g. during torrenting) is falsely detected as disconnected because the
LCP replies are not received in time.

Also bump the copyright year in the Makefile, remove a redundant maintainer
entry and fix the shell processing of the keepalive option when the two-
value syntax is used.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43143
2014-11-01 12:37:03 +00:00
Hauke Mehrtens e30531cd67 brcm47xx: add config for kernel 3.18
This adds a kernel config for kernel 3.18

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43140
2014-10-31 23:54:33 +00:00
Hauke Mehrtens 6deeb3513c kernel: add missing patch for AR8216_PHY_LEDS
The patch adding AR8216_PHY_LEDS was not ported to more recent kernel
versions.
Thank you swalker for spotting this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43139
2014-10-31 23:53:32 +00:00
Hauke Mehrtens 553ed34def kernel: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43138
2014-10-31 23:50:42 +00:00
Hauke Mehrtens e1078da32a kernel: 3.18: add some missing parts in 721-phy_packets.patch
Some changes from the header file were not ported from older kernel.
Thank you swalker for spotting this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43137
2014-10-31 23:48:43 +00:00
Hauke Mehrtens 071570426b kernel: add some missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43136
2014-10-31 23:43:10 +00:00
Hauke Mehrtens 622ea2a66c kernel: remove wrongly added SYS_HAS_DMA_OPS in r43134
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43135
2014-10-31 23:39:34 +00:00
Hauke Mehrtens 5e3d188e89 kernel: add patch header and missing part in 132-mips_inline_dma_ops.patch again
The select SYS_HAS_DMA_OPS in CPU_CAVIUM_OCTEON was from the kernel
patch in 3.13, but it is only included in kernel 3.14 and not in 3.13
and 3.18, add it again.

Thank you swalker for spotting this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43134
2014-10-31 23:32:22 +00:00
Hauke Mehrtens b63cfc9530 mac80211: configuration: Better handling of LIB80211 configuration
Apply patch for kernel 3.10 from r43112 also in 3.12, 3.14 and 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43133
2014-10-31 23:27:27 +00:00
Hauke Mehrtens 7996f0b313 packages: kernel: negate kernel version checks
Only list the kernel versions that do not match so that new kernel
versions will automatically match. This improves support for kernel
3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43132
2014-10-31 22:02:07 +00:00
Hauke Mehrtens 26e68b353f mac80211: remove unused patch
This patch added stuff that is already there and if it would be needed
this would result in a compile error.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43131
2014-10-31 21:55:21 +00:00
Hauke Mehrtens e770d60e47 kernel: kernel 3.18 fix compilation on mips
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43130
2014-10-31 21:54:16 +00:00
Felix Fietkau 0b1c89f6fe target/imagebuilder: remove obsolete !TARGET_ROOTFS_INITRAMFS dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43128
2014-10-31 12:59:23 +00:00
John Crispin 9d11a9e832 uqmi: update to latest git HEAD
this adds support for pin set/unlock/... and iccid.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43127
2014-10-31 11:02:06 +00:00
John Crispin 7589f4baef kernel/modules: add native vxlan package
More recent kernel versions (>= 3.12) support native VXLAN
support.

The Open VSwitch kernel module tries to build using native VXLAN
support if it detects a kernel version >=3.12.

The build works fine, but during startup the OVS kernel module
does not load.
dmesg output is something like this:
    [ 1201.262842] openvswitch: Unknown symbol vxlan_sock_release
    [ 1201.262949] openvswitch: Unknown symbol vxlan_xmit_skb
    [ 1201.263161] openvswitch: Unknown symbol vxlan_sock_add

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 43126
2014-10-31 11:01:28 +00:00
John Crispin 1183af0c48 lantiq: vr9-vdsl-fw: properly write firmware to flash
Using a redirect to a non-empty mtd partition will not erase the
blocks prior to writing to them resulting in broken dsl_fw.
Fix this by piping to mtd write - /dev/mtdX instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43125
2014-10-31 11:00:42 +00:00
Steven Barth 8f877ff42b 6in4: https support for he.net tunnel api
HE.net tunnel update API requests are now made via https if an
SSL-capable wget is installed.  Certificate validation is
conditionally enabled if the CA certs are available.

Signed-off-by: Andrew Skalski <askalski@gmail.com>

SVN-Revision: 43124
2014-10-30 13:15:18 +00:00
Steven Barth 6a4a437e04 openssl: optimize build options, disable old SSL versions
Based on a patchset by Etienne CHAMPETIER <champetier.etienne@gmail.com>
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43123
2014-10-30 13:11:04 +00:00
Zoltan Herpai d7e981ca4c kernel: add missing symbols for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43121
2014-10-30 10:15:20 +00:00
John Crispin 2f30ba5328 ralink: make sure a mii_bus is loaded before accesing its state
this caused a crash on boot

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43120
2014-10-30 10:10:57 +00:00
John Crispin 0b64dca49d ralink: load mt7530 driver on the 3 buffalo units
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43119
2014-10-30 10:10:51 +00:00
John Crispin 4654319964 procd: Allow boot messages to be sent to console
update to latest git HEAD, adds "log to console"

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43118
2014-10-30 10:10:45 +00:00
John Crispin 0b19244498 ralink: mt7530 - force wan port up
some bootloaders (linksys e1700) set wonky hw trap values. reset this upon boot to make all ports work.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43117
2014-10-30 08:44:00 +00:00
John Crispin c466262d53 vgv7519: fix profile, this board have a rt2800-pci board
SVN-Revision: 43115
2014-10-30 08:08:09 +00:00
John Crispin 26e308019d ltq-vdsl-app: use VDSL tone-setup if annex is unset
I had to use a VDSL-only tone-setup to get show-time.
Handle this in uci by checking if annex is unset.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43114
2014-10-30 08:08:01 +00:00
John Crispin 38692d14f2 ralink: fix mt7530 for newer silicon revisions
latest mt7530 silicon seems to have a different phy id.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43113
2014-10-30 08:07:49 +00:00
John Crispin ca28f9c515 mac80211: configuration: Better handling of LIB80211 configuration
OpenWRT patch 255-lib80211_kconfig_hacks gives user possiblity to select
LIB80211 dependant settings (LIB80211_CRYPT_*) without having LIB80211
selected which is wrong.
My patch changes OpenWRT patch so LIB80211 is vissible and all
LIB80211_CRYPT_* options selects LIB80211 automatically.

Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com>

SVN-Revision: 43112
2014-10-29 21:04:30 +00:00
John Crispin 9205c6da4b ca-certificates: Update to Version 20141019
Update to Version 20141019

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 43111
2014-10-29 21:01:26 +00:00
John Crispin 36e862da17 lantiq: vgv7519: fix board_config on dts, read mac address and set
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43109
2014-10-29 20:50:40 +00:00
John Crispin 152d692a1f ramips: improve ralink ethernet driver
Change list:
* add tx scatter gather function.
* add software rx vlan offload to let GRO work.
* add jumbo frame support. because use build_skb so max MTU is 3812.
* enable hardware tx vlan.
* enable GRO and remove LRO. because it can improve performance and can work on forwarding.
* enable/fix tx padding function.
* let napi handle tx clean up.
* support ethtool operation. now support message level, hardware status and coalesce.
* ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it.

Notes:
* build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a.
* TCP NAT performance improve. test with netperf.
  - rt2880(gigabit) from 5x to 12x Mbps.
  - rt3x5x from 6x to 94 Mbps.
  - rt5250 from 5x to 8x Mbps.
  - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame.
  - mt7620 still 94Mbps.
* TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43108
2014-10-29 19:43:59 +00:00
John Crispin 62107ff367 swconfig: last vs tail
sorry .....

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43107
2014-10-29 19:24:16 +00:00
John Crispin ab5d70e046 swconfig: "swconfig list" shows devices in reverse order
Boards that have more than one swconfig enabled switch will show the devices in
reverse order when call swconfig list. Fix this by using list_add_tail().

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43106
2014-10-29 18:51:06 +00:00
John Crispin c0bf47232a ralink: fix switch config on mt7530 evb
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43105
2014-10-29 18:51:02 +00:00
John Crispin 8223e78121 ralink: fix a off by 4 bug in mt7530
0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43104
2014-10-29 18:49:46 +00:00
John Crispin fd5873eb33 Add support for DHT11 driver
The DHT11 is a temperature and humidity sensor supported by linux
since 3.14.

This patch is tested on recent mxs with kernel 3.14.18.

Signed-off-by: Harald Geyer <harald@ccbib.org>

SVN-Revision: 43103
2014-10-29 15:02:38 +00:00
John Crispin d0bf15f235 ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

SVN-Revision: 43102
2014-10-29 11:01:17 +00:00
John Crispin 9762c54914 lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotes
lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by
detecting whether vdsl_cpe_control or dsl_cpe_control should be used.
Also add missing quotes around shell string comparision.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43101
2014-10-29 08:23:47 +00:00
Rafał Miłecki 0100a8a68e brcm47xx: initial support for kernel 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43100
2014-10-28 10:26:00 +00:00
Hauke Mehrtens fb543b63a9 kernel: add closing " to REGMAP_I2C's tristate
Thanks swalker for reporting.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43099
2014-10-27 23:14:21 +00:00
Hauke Mehrtens f12c4b0815 bcm53xx: remove support for fpu
This SoC does not have a vfpv3 FPU.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43098
2014-10-27 23:04:07 +00:00
Hauke Mehrtens 7fc9bb1aca bcm53xx: initial support for kernel 3.18
This adds initial support for kernel 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43097
2014-10-27 23:02:08 +00:00
Hauke Mehrtens d8d692342f kernel: add generic config for kernel 3.18
There are still many options missing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43096
2014-10-27 22:58:12 +00:00
Hauke Mehrtens a76ee3b1d5 kernel: make the kernel 3.18 patches apply and boot on arm.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43095
2014-10-27 22:55:39 +00:00
Rafał Miłecki cea2b5299b kernel: make it possible to select experimental 3.18 (3.18-rc2)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43094
2014-10-27 18:16:45 +00:00