5d37f15006
busybox: support V=c toplevel verboseness flag ( #11799 )
...
Signed-off-by: Gregory M. Turner <gmt@malth.us>
SVN-Revision: 33035
2012-08-07 16:08:11 +00:00
105c0d3fa4
w1-gpio-custom: set enable_external_pullup to null ( #8952 )
...
SVN-Revision: 33034
2012-08-07 16:08:08 +00:00
143ef2c8ff
ath9k: completely disable the MIB interrupt from the interrupt mask register to prevent potential interrupt storms
...
SVN-Revision: 33032
2012-08-07 09:36:24 +00:00
a55de42c7d
ath9k: extend and enable PA predistortion
...
SVN-Revision: 33031
2012-08-06 22:11:30 +00:00
74c27a1a92
mac80211: do not delete linux/*_platform.h, they are touched by patches. instead make the build fail if they differ from the ones in the kernel tree to prevent subtle runtime issues (see #11981 )
...
SVN-Revision: 33030
2012-08-06 20:18:07 +00:00
54f30d4f46
fixes tapi dependencies
...
SVN-Revision: 33029
2012-08-06 18:56:38 +00:00
12c6df34cd
fixes package description
...
SVN-Revision: 33028
2012-08-06 18:54:36 +00:00
0796df61af
ath5k: add various pending tx power fixes, vastly improves stability and performance with various cards
...
SVN-Revision: 33014
2012-08-06 15:33:24 +00:00
19a8508046
mac80211: remove header files used to share struct with platform code.
...
The structs defined in these header files should be the same as the
structes used by the platform code otherwise it will cause strange
runtime errors. By removing them from compat-wireless we will get a
compile error instead of a runtime error if they are out of sync.
SVN-Revision: 33006
2012-08-05 23:43:36 +00:00
40f139b53b
switch: clean up robo switch driver
...
* remove use_et, all supported drivers are using mii ioctls
* remove robo.phy_addr, phy_addr was always set to ROBO_PHY_ADDR.
* remove support for old kernel versions
* do_ioctl is allways called with buff == NULL
* use if_mii
SVN-Revision: 33002
2012-08-05 13:10:43 +00:00
1ae8b7c433
fix xen pci module, partially fixes #11970
...
SVN-Revision: 32996
2012-08-05 08:16:50 +00:00
0758996824
brcm47xx: use libgpio instaed of implementing the gpio interface ourself.
...
SVN-Revision: 32992
2012-08-04 19:46:25 +00:00
3942aebedc
gspca-sn9c20x.ko was not insmod'ed due to typo
...
fixes #11973
SVN-Revision: 32991
2012-08-04 19:17:49 +00:00
23f6ec6ef6
wrt55agv2-spidevs needs <linux/modules.h>
...
SVN-Revision: 32956
2012-08-03 09:38:24 +00:00
83907c10ed
uclibc++: update to 0.2.4
...
SVN-Revision: 32929
2012-08-01 12:01:24 +00:00
5df254664f
uclibc++: stage g++-uc wrappers in $(TOOLCHAIN_DIR)
...
Since we are overriding TARGET_CXX with the g++-uc wrapper when
we use cmake it expects to find g++-uc in the TOOLCHAIN_DIR.
SVN-Revision: 32928
2012-08-01 12:01:18 +00:00
e29d26e56f
partially revert r32855
...
Too many modules were removed, while only the octeon module was meant to be
removed, fix that.
SVN-Revision: 32909
2012-07-29 13:20:47 +00:00
1f58c9b6c1
dont build on arm as kernel headers are missing/have a different layout
...
SVN-Revision: 32904
2012-07-29 09:07:47 +00:00
101766fb00
clean up pwm patches and drivers
...
SVN-Revision: 32901
2012-07-28 20:47:08 +00:00
6afd1725f1
base-files: fix detection of standalone ldd
...
When standalone ldd is selected in config the binary is installed in /usr/bin/ldd.
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 32891
2012-07-27 15:35:00 +00:00
9beec09f5f
mae brcmutil depend on PCI and USB. This broke ar7 fullbuilds
...
SVN-Revision: 32886
2012-07-27 08:30:05 +00:00
0c75abf527
bcma: update to version from wireless-testing tag master-2012-07-16
...
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.
This also contains 3 additional patches fixing some bugs in bcma.
SVN-Revision: 32880
2012-07-26 15:42:18 +00:00
4a3cbbf99d
make kmod-mvsas depend on x86 since it fails building on other targets (eg: brcm63xx)
...
SVN-Revision: 32878
2012-07-26 09:29:22 +00:00
d359d46182
make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly
...
SVN-Revision: 32869
2012-07-25 19:36:19 +00:00
5832e754fb
mtd: fix trx_fixup
...
With the BRCM47xx image I have built (Linksys E3000), there are additional
writes following the completion of "mtd_replace_jffs2" which invalidate the
'trx_fixup' performed by 'mtd_replace_jffs2'. Moving the 'trx_fixup' to somewhere
after all writes have completed fixes the problem. I also noticed that 'erasesize'
used to compute 'block_offset' in 'mtd_fixtrx' is used before it is computed by
'mtd_check_open'; moving the call to 'mtd_check_open' up a few lines fixes this.
Unlike 'mtd_fixtrx', 'trx_fixup' appears to assume that the TRX header is always at
offset 0; which may be the cause of the problem described in Ticket #8960 .
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 32866
2012-07-25 17:28:32 +00:00
adc2b21be8
move isp116x driver to target specific modules.mk
...
SVN-Revision: 32865
2012-07-25 15:50:45 +00:00
1627b2bb4b
move rt305x-dwc driver to target specific modules.mk
...
SVN-Revision: 32864
2012-07-25 15:50:42 +00:00
c7a69869f7
move ubsec-ssb driver to target specific modules.mk
...
SVN-Revision: 32863
2012-07-25 15:50:38 +00:00
d1b2087a35
move ssb-gige to target specific modules.mk
...
SVN-Revision: 32862
2012-07-25 15:50:36 +00:00
c14d907b8b
move usb driver to target specific modules.mk
...
SVN-Revision: 32861
2012-07-25 15:50:33 +00:00
5b2450ef4f
kmod-r6040 depends on PCI_SUPPORT
...
SVN-Revision: 32860
2012-07-25 15:50:29 +00:00
3b5a8548f4
move mmc driver to target specific modules.mk
...
SVN-Revision: 32859
2012-07-25 15:50:26 +00:00
18038c803c
move ixp4xx-eth to target specific modules.mk
...
SVN-Revision: 32858
2012-07-25 15:50:23 +00:00
53402a64b3
kmod-gpio-nxp74hc164 is not brcm63xx specific
...
SVN-Revision: 32857
2012-07-25 15:50:20 +00:00
4000de357e
move crypto module to target specific modules.mk
...
SVN-Revision: 32856
2012-07-25 15:50:16 +00:00
a282e37c09
move i2c driver to target modules.mk
...
SVN-Revision: 32855
2012-07-25 15:50:13 +00:00
accbc20045
move watchdog driver to target specific modules.mk
...
SVN-Revision: 32854
2012-07-25 15:50:10 +00:00
23ffbad602
move target specific spi modules
...
SVN-Revision: 32853
2012-07-25 15:50:04 +00:00
1859500829
move target specific leds modules to ar71xx modules.mk
...
SVN-Revision: 32852
2012-07-25 15:50:02 +00:00
c3b9a987b7
move leds modules back to target modules.mk
...
SVN-Revision: 32851
2012-07-25 15:49:57 +00:00
bca45d6d8a
move i2c modules back to target modules.mk
...
SVN-Revision: 32850
2012-07-25 15:49:54 +00:00
29ccabae44
fix network devices modules to depend on PCI instead of x86
...
SVN-Revision: 32849
2012-07-25 15:49:52 +00:00
2bfb2a797c
move more x86-specific modules back to target modules.mk
...
SVN-Revision: 32848
2012-07-25 15:49:49 +00:00
276bc6b9e8
fix libsas and mvsas dependencies against PCI and not x86
...
SVN-Revision: 32847
2012-07-25 15:49:46 +00:00
d973768580
move x86 specific ide/pata modules to x86' modules.mk
...
SVN-Revision: 32846
2012-07-25 15:49:42 +00:00
89a312bf48
split framebuffer helper modules to their own packages
...
SVN-Revision: 32843
2012-07-25 14:01:54 +00:00
2113c65f95
fixes build for 3.x kernel and remove old 2.6.x references
...
Signed-off-by: christoph.thielecke@gmx.de
SVN-Revision: 32832
2012-07-24 23:07:35 +00:00
7639c9b580
mac80211/hostapd: add support for HT capa in case of IBSS/RSN
...
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32830
2012-07-24 23:07:25 +00:00
8b3882224a
wpa_supplicant: add more parameters
...
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32829
2012-07-24 23:07:15 +00:00
3f3268c0c2
hostapd: add pending patches
...
add patched needed to pass more parameters to the IBSS JOIN command
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
SVN-Revision: 32828
2012-07-24 23:07:10 +00:00
Florian Fainelli
Felix Fietkau
John Crispin
Hauke Mehrtens