e083c7926b
brcm47xx: create image for Netgear WNDR3400 V1
...
SVN-Revision: 35323
2013-01-26 20:34:38 +00:00
05623aebef
brcm47xx: add initial board detection code
...
SVN-Revision: 35322
2013-01-26 20:34:00 +00:00
a83d7bb109
brcm47xx: add gpio to irq function again
...
SVN-Revision: 35321
2013-01-26 20:33:23 +00:00
8933b918cd
kernel: use -ffunction-sections, -fdata-sections and --gc-sections on mips
...
in combination with kernel symbol export stripping this significantly reduces
the kernel image size
SVN-Revision: 35320
2013-01-26 16:26:13 +00:00
7809d73fd2
kernel: fix module export stripping
...
SVN-Revision: 35319
2013-01-26 16:26:04 +00:00
15be1c9ee7
kernel: update linux 3.7 to 3.7.4
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35318
2013-01-24 17:08:37 +00:00
680f460861
kernel: refresh 3.8 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35317
2013-01-24 17:04:52 +00:00
9781461a3d
mvebu: update to 3.8-rc4
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35316
2013-01-24 17:04:46 +00:00
4a69e20a10
kernel: add missing config options for 3.8
...
SVN-Revision: 35315
2013-01-24 14:48:15 +00:00
76c12ff797
brcm47xx: change generic profiles
...
The default profile now contains Ethernet drivers for all the types
found on supported boards. There are other profiles for each Ethernet
driver.
SVN-Revision: 35314
2013-01-24 14:38:10 +00:00
b60fc82ce5
kernel: remove the cisco sip phone patch for 3.7 and 3.8 as well
...
SVN-Revision: 35310
2013-01-23 16:31:38 +00:00
8ce8960959
ar71xx: sync kernel sizes where possible to fix images for some devices ( #12874 )
...
SVN-Revision: 35309
2013-01-23 16:29:25 +00:00
8411e5c06e
bcm63xx: switch to b53 and swconfig
...
Switch to using the B53 switch driver where appropriate.
Use a non-tagged default config where it isn't confirmed to be
working.
Remove the switch configuration in preinit as the switch will now
be configured by the driver to use port isolation to prevent leakage
between lan and wan.
While at it, also provide a switch config for Neufbox 6.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
17d51121a6
bcm63xx: expose the internal switch to b53
...
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
bb0118c66f
generic: add b53 swconfig switch driver
...
Add swconfig switch driver for Broadcom BCM53XX switch chips. Supports
switches connected through MDIO, SPI or memory mapped registers, and
supports BCM5325, BCM539x, BCM531x5 and the BCM63XX internal switch
chips.
Tested are BCM5325 trough MDIO, BCM53115 through SPI, and BCM6328.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35305
2013-01-23 10:12:33 +00:00
3e998d9cf9
bcm63xx: move bcm63xx-spi into the kernel
...
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
a81c76617e
ipv6-support: don't overwrite existing setting across reflashs
...
SVN-Revision: 35302
2013-01-23 08:15:09 +00:00
231f8c2969
base-files: fix network_get_prefix6
...
SVN-Revision: 35300
2013-01-22 16:47:16 +00:00
e0a338c969
base-files: Set default value for IPv6 forwarding
...
SVN-Revision: 35299
2013-01-22 16:47:09 +00:00
55eab5ac44
netifd: update to latest version, adds another fix for interface aliases
...
SVN-Revision: 35297
2013-01-22 16:05:59 +00:00
5859fc7a39
netifd: Fix a segfault when globals.ula_prefix is empty
...
SVN-Revision: 35296
2013-01-22 15:49:42 +00:00
a4c7a953e5
uhttpd: always turn on TLS support, include ustream-ssl as a build dependency
...
SVN-Revision: 35295
2013-01-22 15:05:04 +00:00
7b845ca9c7
ustream-ssl: remove dependency conditional part to avoid build breakage when no variant is selected
...
SVN-Revision: 35294
2013-01-22 14:52:52 +00:00
aca0690ce5
ustream-ssl: update to latest version, fixes handling large chunks of data ( fixes #12866 )
...
SVN-Revision: 35293
2013-01-22 14:29:01 +00:00
2245726371
uboot-lantiq: upgrade to 2013.01
...
SVN-Revision: 35292
2013-01-22 12:55:01 +00:00
bab482b93f
uhttpd: fix another small hang issue with the same symptoms
...
SVN-Revision: 35291
2013-01-22 09:38:00 +00:00
166ea3832b
uhttpd: fix connection hangs
...
SVN-Revision: 35290
2013-01-22 09:28:55 +00:00
bc1d72c7bf
tcpdump: add SLL parsing support to tcpdump-mini, use -ffunction-sections, -fdata-sections and --gc-sections to reduce size
...
SVN-Revision: 35288
2013-01-22 07:51:15 +00:00
1941fb309d
base-files: network.sh: fix typo in previous commit
...
SVN-Revision: 35287
2013-01-21 19:02:38 +00:00
3b2db1838a
base-files: network.sh: simplify network_get_prefix6()
...
SVN-Revision: 35286
2013-01-21 18:54:58 +00:00
4e8eced06a
kernel: turn on kallsyms and debug info by default
...
SVN-Revision: 35285
2013-01-21 16:13:43 +00:00
c725669079
uhttpd: fix unencrypted passwords in httpd.conf
...
SVN-Revision: 35265
2013-01-21 12:46:41 +00:00
11e3592531
ath9k: add support for more antenna mask combinations on AR93xx
...
SVN-Revision: 35264
2013-01-21 12:46:37 +00:00
38080ae550
6relayd: fix shell library includes in init-script
...
Thanks to Daniel Golle
SVN-Revision: 35262
2013-01-21 11:27:03 +00:00
8a97d823a4
6relayd: avoid a race-condition with looping RAs
...
SVN-Revision: 35260
2013-01-21 10:42:31 +00:00
f129c6786e
netifd: Fix segfaults in IPv6 prefix handling
...
SVN-Revision: 35259
2013-01-21 09:21:30 +00:00
f1fd0f8278
odhcp6c: Fix address assignment with infinite validity
...
SVN-Revision: 35258
2013-01-21 07:58:58 +00:00
4a86973285
uhttpd: fix selecting the right ustream implementation when openssl is to be used ( #12857 )
...
SVN-Revision: 35257
2013-01-20 21:15:43 +00:00
e219c56a11
ath9k: merge another round of cleanups and stability fixes, refresh patches
...
SVN-Revision: 35255
2013-01-20 18:33:21 +00:00
5bc6555e08
netifd: update to latest version, fixes alias support
...
SVN-Revision: 35251
2013-01-20 15:47:09 +00:00
18a7d0e945
network/iproute2: Bump version to 3.7.0
...
Updated to latest stable version and added an upstream patch to handle
a link failure
Signed-off-by: Oliver Smith <olipro@8.c.9.b.0.7.4.0.1.0.0.2.ip6.arpa>
[dgolle@allnet.de: refreshed patches]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 35250
2013-01-20 11:25:18 +00:00
e55ee0817f
uhttpd: update to a newer version, fixes chunked transfer on some POST requests
...
SVN-Revision: 35249
2013-01-19 22:55:46 +00:00
46e4246d61
kernel: remove 340-module_alloc_size_check.patch from linux 3.8, it is not necessary anymore
...
SVN-Revision: 35248
2013-01-19 19:14:37 +00:00
6f0ecf0541
uhttpd: switch to uhttpd2, it is now feature complete
...
SVN-Revision: 35247
2013-01-19 18:47:09 +00:00
ed6d399f8d
ramips: add profile and build image for the Tenda 3G300M
...
Factory image should be used to flash from
original firmware.
[juhosg: use the GENERIC_4M template]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35246
2013-01-19 17:05:07 +00:00
9891603eb5
ramips: add user-space support for the Tenda 3G300M
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35245
2013-01-19 17:05:06 +00:00
7eff5d2df0
ramips: add kernel support for the Tenda 3G300M
...
Ralink RT3052F, 4MB flash, 32MB ram, one USB 2.0, two buttons
and seven leds.
Factory image should be used to flash from original firmware.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35244
2013-01-19 17:05:03 +00:00
f7a943694f
ramips: use MkImage for Hauppauge Broadway, Netcore NW718 and Tenda W306R V2.0
...
These targets need custom image names specified in the uImage header.
MkImage accepts an optional 4th argument to do exactly that. Reuse the
facility to generate factory images.
Compile-tested, the generated files inspected with "file" utility.
[juhosg:
- keep the factory.bin images to avoid users confusion,
- use GENERIC_4M template for the W306R V2.0
- update commit log]
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35243
2013-01-19 15:36:13 +00:00
6aebe6a65d
ramips: allow to override image name/suffix in GENERIC_{4,8}M macros
...
Sysupgrade/KRuImage and BuildFirmware/Generic macros
are changed as well.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35242
2013-01-19 15:36:11 +00:00
f2766239ea
netifd: add a band-aid fix for the wifi setup vs. netifd init race by increasing the wait time to five seconds
...
SVN-Revision: 35240
2013-01-19 10:13:14 +00:00
Hauke Mehrtens
Felix Fietkau
Gabor Juhos
Florian Fainelli
Jonas Gorski
Steven Barth
Luka Perkov
Jo-Philipp Wich