Commit Graph

22 Commits (5b0e7947e3f3d0deaa1ae6d79237515efcfad994)

Author SHA1 Message Date
Hauke Mehrtens 4a9acacf53 kernel: 3.14: update bcm47xxpart
It it used by brcm47xx and bcm53xx targets, so put patches in generic.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42212
2014-08-18 21:57:54 +00:00
Hauke Mehrtens 254b4df66f brcm47xx: fix brcm47xx.legacy build
we should check for ssb here.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42164
2014-08-14 21:21:27 +00:00
Hauke Mehrtens 47bab2b654 brcm47xx: fix reboot problem on BCM4705/BCM4785
This adds some code based on code from the Broadcom GPL tar to fix the
reboot problems on BCM4705/BCM4785. I tried rebooting my device for ~10
times and have never seen a problem. This reverts the changes in the
previous commit and adds the real fix as suggested by Rafał.

Setting bit 22 in Reg 22, sel 4 puts the BIU (Bus Interface Unit) into
async mode.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42088
2014-08-08 23:10:16 +00:00
Hauke Mehrtens 4ec288bfa4 brcm47xx: 3.14: backport MIPS patches for early HIGHMEM support
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42053
2014-08-07 20:21:11 +00:00
Hauke Mehrtens f7b3b7db7d brcm47xx: 3.14: update MIPS patches with versions sent upstream
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41911
2014-07-31 21:42:59 +00:00
Hauke Mehrtens 7435b628c6 brcm47xx: fix switch detection with kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41706
2014-07-17 20:34:18 +00:00
Hauke Mehrtens f5955c2e6b brcm47xx: fix LEDs on WRT54GL 1.1
Ticket: #17062
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41666
2014-07-15 21:54:38 +00:00
Hauke Mehrtens 7dbea92a9c brcm47xx: improve board detection for some devices
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41662
2014-07-14 22:03:59 +00:00
Hauke Mehrtens 0a5145e851 brcm47xx: make reboot a more reliable
A reboot is issued by setting the watchdog timer to a low value, when
the value is decreased from 1 to 0 by the hardware the system will
reboot. Setting this value to 1 does not work every time, it is a
little bit more reliable when setting it to 3. This timer runs with
some MHz or KHz so nobody will notice the increased waiting.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41548
2014-07-07 20:12:40 +00:00
Hauke Mehrtens f42c36ea60 brcm47xx: add buttons support for Netgear WNR3500L
Ticket: #14406

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41547
2014-07-07 19:14:22 +00:00
Hauke Mehrtens df8741f92b brcm47xx: fix bcm4705 rebooting when initializing the switch.
When the Ethernet controller is powered down and someone wants to
access the mdio bus like the witch driver (b53) the system crashed if
PCI_D3hot was set before. This patch deactivates this power sawing mode
when a switch driver is in use.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41527
2014-07-06 13:45:43 +00:00
Hauke Mehrtens 356663cdc8 brcm47xx: add LEDs for Netgear WNR3500L
https://dev.openwrt.org/ticket/14406

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41520
2014-07-05 23:25:26 +00:00
Hauke Mehrtens 8e4efd42d9 brcm47xx: make it possible to unregister the adm switch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41517
2014-07-05 21:35:15 +00:00
Hauke Mehrtens 03e2310a38 brcm47xx: fix LEDs on WRTSL54GS
https://dev.openwrt.org/ticket/16991

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41516
2014-07-05 19:40:15 +00:00
Hauke Mehrtens 77dee19ab4 brcm47xx: increase fallback mac addresses by one
Now the mac address is increased by two for the first fallback mac
address. It could be that the address increased should be used for the
wan port.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41515
2014-07-05 19:36:49 +00:00
Hauke Mehrtens 3fff38f93a brcm47xx: do not use mac addresses with 00:90:4C prefix, prevent mac address collisions.
The address prefix 00:90:4C is used by Broadcom in their initial
configuration. When a mac address with the prefix 00:90:4C is used
all devices from the same series are sharing the same mac address.
To prevent mac address collisions we replace them with a mac address
based on the base address.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41513
2014-07-05 15:04:50 +00:00
Hauke Mehrtens 3f64bb8f8f brcm47xx: add LEDs for Asus RT-N15U and update RT-N66U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41501
2014-07-03 21:41:33 +00:00
Hauke Mehrtens ba1b49dbab brcm47xx: backport BCM47XX Linksys WRT54G series patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41486
2014-07-02 21:54:59 +00:00
Hauke Mehrtens e99cfaaf95 brcm47xx: refresh patches
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40425
2014-04-08 19:51:36 +00:00
Hauke Mehrtens 499d1f1401 brcm47xx: Name LEDs colors for Linksys E1000 V2.1
Handle it by creating a new patch for simple database changes.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40345
2014-03-30 19:07:13 +00:00
Hauke Mehrtens a1f4a43cef brcm47xx: update workarounds patch to V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 40344
2014-03-30 19:06:24 +00:00
Hauke Mehrtens 00dc53dd2e brcm47xx: add initial support for kernel 3.14
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 39905
2014-03-12 23:28:41 +00:00