Commit Graph

8915 Commits (579e9cded8ecc63ae5e14cb2ee0dbd868d90b9a8)

Author SHA1 Message Date
Gabor Juhos 9375e83586 xburst: add missing config symbol
SVN-Revision: 32021
2012-06-02 12:06:15 +00:00
John Crispin 76e4cd2a24 add $(SUBTARGET) to the filename if available
SVN-Revision: 32007
2012-05-30 18:04:15 +00:00
John Crispin 47ef62d1b8 adds patch to make Tantos (psb6970) switch buildable again
SVN-Revision: 32006
2012-05-30 17:41:28 +00:00
Jonas Gorski 3fc76fb781 bcm63xx: build images for 6328 reference boards with various flash sizes
Build images for 96328avng and 963281TAN (untested) for three different
flash sizes: 4MB, 8MB, and 16MB.

Known issues:
 * Button setup unknown, thus no fail-safe available.
 * All other BCM6328 and BCM63XX issues

SVN-Revision: 32004
2012-05-30 10:27:46 +00:00
Jonas Gorski c454ba3657 bcm63xx: readd accidentially dropped network config for SPW303V
SVN-Revision: 32003
2012-05-30 10:27:42 +00:00
Gabor Juhos 9e02593b70 generic: ar8216: add revision specific PHY fixups for AR8327
SVN-Revision: 32000
2012-05-29 16:39:27 +00:00
Gabor Juhos 0d241e6670 generic: ar8216: replace chip_type field with chip_{ver,rev} in ar8216_priv
SVN-Revision: 31999
2012-05-29 16:39:26 +00:00
Gabor Juhos b2fce19a70 generic: ar8216: add chip_is_ar8{216,236,316,327} helpers
SVN-Revision: 31998
2012-05-29 16:39:24 +00:00
Gabor Juhos cd7ab1d30b ar71xx: add default LED setup for the DB120 board
SVN-Revision: 31997
2012-05-29 16:39:23 +00:00
Gabor Juhos 29a579e43a cns21xx: use the generic uci-default functions for initial LED setup
SVN-Revision: 31996
2012-05-29 16:39:22 +00:00
Gabor Juhos ff74305623 lantiq: use the generic uci-default functions for initial LED setup
SVN-Revision: 31995
2012-05-29 16:39:21 +00:00
Gabor Juhos c81c6516de kirkwood: use the generic uci-default functions for initial LED setup
SVN-Revision: 31994
2012-05-29 16:39:20 +00:00
Gabor Juhos ffbb4f88a9 ramips: use the generic uci-default functions for initial LED setup
SVN-Revision: 31993
2012-05-29 16:39:18 +00:00
Gabor Juhos 4e40bdc190 ar71xx: use the generic uci-default functions for initial LED setup
SVN-Revision: 31992
2012-05-29 16:39:17 +00:00
Gabor Juhos ba3ad24514 kirkwood: use uci-defaults to configure different boards
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31990
2012-05-29 16:39:15 +00:00
Gabor Juhos c71838faa1 ramips: WAN LED for D-Link DIR-300-B1
Add led devices for D-Link DIR-300-B1 WAN LED.

Note that the GPIO state is also ANDed with the esw switch port 4
LED state, which is why I've set the amber LED to default-on.

Closes: https://dev.openwrt.org/ticket/11326

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

[ juhosg:
- fix comment style in mach-dir-300-revb.c,
- remove the PPP specific LED setup, not everyone uses a PPP connection
  on the WAN interface]

SVN-Revision: 31989
2012-05-29 16:39:03 +00:00
Felix Fietkau a9cd8446f3 ar71xx: do not override the mdio clock for ar9330. the override value (obtained from an atheros driver) seems to break ethernet functionality
SVN-Revision: 31956
2012-05-28 20:39:50 +00:00
Felix Fietkau 367e4b3994 ar71xx: improve rx performance of the ethernet driver by using build_skb to deliver a cache-hot skb to the network stack
SVN-Revision: 31934
2012-05-28 02:55:59 +00:00
Felix Fietkau 8039a1bbb2 ar71xx: fix MII clock settings for various chips, improves ethernet stability on AR934x
SVN-Revision: 31925
2012-05-27 21:02:41 +00:00
Felix Fietkau f638414fdc kernel: fix suppressing -s for linking modules when profiling is enabled
SVN-Revision: 31924
2012-05-27 21:02:36 +00:00
Gabor Juhos 8865f0923e ar71xx: fix TL-WR1041 image size
SVN-Revision: 31923
2012-05-27 17:21:47 +00:00
Gabor Juhos 1c552ba8e5 ramips: rt3883: add device registration code for the SPI controller
SVN-Revision: 31922
2012-05-27 17:10:00 +00:00
Gabor Juhos 9c241983fc ramips: allow to use the SPI driver on RT3662/RT3883
SVN-Revision: 31921
2012-05-27 17:09:58 +00:00
Gabor Juhos 78a750dcce ramips: rt3883: fix GPIO reservation for the SPI pins
SVN-Revision: 31920
2012-05-27 17:09:56 +00:00
Gabor Juhos 0622fdd82c ramips: rt305x: remove superfluous controller_data assignment
SVN-Revision: 31919
2012-05-27 17:09:52 +00:00
Gabor Juhos 7f5bec0642 ramips: make rt2x00 firmware extraction quiet
SVN-Revision: 31918
2012-05-27 17:09:50 +00:00
Gabor Juhos 86dad96fd0 generic: rtl8367: rename a misnamed variable
SVN-Revision: 31917
2012-05-27 17:09:47 +00:00
Gabor Juhos 705d31203c generic: rtl8366_smi: remove duplicated spinlock initialization
SVN-Revision: 31916
2012-05-27 17:09:45 +00:00
Gabor Juhos 9217115687 generic: rtl8366_smi: rename debugfs Kconfig symbol
SVN-Revision: 31915
2012-05-27 17:09:43 +00:00
Gabor Juhos 466ef30173 generic: rtl8367: allow to use VLANs > 31
SVN-Revision: 31914
2012-05-27 17:09:41 +00:00
John Crispin f567980d38 move files-3.3 -> files
SVN-Revision: 31912
2012-05-27 16:13:02 +00:00
John Crispin 8002770520 3.2 R.I.P.
SVN-Revision: 31911
2012-05-27 16:12:59 +00:00
John Crispin 81ddc886e1 dgn3500 support with eeprom loading from sysfs
WIFI eeprom:
As discussed, it is impossible for nand and spi flash platforms to have the eeprom data available from mtd. I suggested to load the eeprom from user-space. I've looked into regular firmware loading but this is only possible when using modules.  I've created a sysfs entry that allows reading and writing the eeprom data to the platform data. After loading the eeprom data I rely on pci-hotplug support to disable the bogus pci device and rescan the bus (with fixups and all). Because hotplug is not available, an init script is created that performs the copy from mtd to platform data. I think it is best to eventually move the sysfs functions to dev_wifi_athxk.c file, this would get rid of the external to the ath9k platform data.

SPI flash:
It seems that the spi-xway driver is not really working. It causes my kernel to crash in all sorts of ways. I added to bitbang SPI to be able to the calibration data mention above.
I've kept the original mtd partitioning that Netgear uses.

Buttons/LED:
Both buttons are working properly. Two leds are not enabled: The red internet led is connected to the pci_gnt1 pin... I can't disable it because then DMA stops working.
The green wifi led is connected to an unknown atheros gpio.

Signed-off-by: Pieter Voorthuijsen <p.voorthuijsen at gmail.com>

SVN-Revision: 31910
2012-05-27 16:02:22 +00:00
John Crispin 6e8fe84472 fixes zyxel p2601hnfx
moves the linux partition, removes the config partition and the
buttons settings have small adjustments.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31909
2012-05-27 16:02:20 +00:00
John Crispin 3f2f50c681 Add basic configuration for new board ZTE H201L. Still missing are button and led gpio values.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31908
2012-05-27 16:02:16 +00:00
Felix Fietkau 51bc47ce7c kernel: properly pad the allocated headroom in skb_cow to NET_SKB_PAD
SVN-Revision: 31906
2012-05-27 15:16:37 +00:00
Gabor Juhos 0b8c1c8dfb linux/3.2: R.I.P.
SVN-Revision: 31905
2012-05-27 15:01:37 +00:00
Gabor Juhos 20ba6d90e3 xburst: remove support for old kernels
SVN-Revision: 31904
2012-05-27 15:01:35 +00:00
Gabor Juhos d043cb2c34 xburst: switch to 3.3 and add broken flag
SVN-Revision: 31903
2012-05-27 15:01:33 +00:00
Gabor Juhos 9a26e9f843 xburst: add support for 3.3
SVN-Revision: 31902
2012-05-27 15:01:32 +00:00
Gabor Juhos 9dd7a6d9e2 ppc44x: remove 3.2 support
SVN-Revision: 31901
2012-05-27 15:01:30 +00:00
Gabor Juhos 05d74942b1 ppx44x: switch to 3.3 and add broken flag
SVN-Revision: 31900
2012-05-27 15:01:28 +00:00
Gabor Juhos 9300e0496c ppc44x: add support for 3.3
Compile tested only.

SVN-Revision: 31899
2012-05-27 15:01:27 +00:00
Gabor Juhos c50f1f7536 cobalt: switch to 3.3 and add broken flag
Compile tested only.

SVN-Revision: 31898
2012-05-27 15:01:26 +00:00
Gabor Juhos 471cf87ff0 ep93xx: remove 3.2 support
SVN-Revision: 31897
2012-05-27 15:01:24 +00:00
Gabor Juhos 400b9b5b87 ep93xx: switch to 3.3 and add broken flag
SVN-Revision: 31896
2012-05-27 15:01:23 +00:00
Gabor Juhos 7501f2364f ep93xx: add support for 3.3
Compile tested only.

SVN-Revision: 31895
2012-05-27 15:01:21 +00:00
Gabor Juhos 907e88a37f au1000: remove 3.2 support
SVN-Revision: 31894
2012-05-27 15:01:18 +00:00
Gabor Juhos fbe10e73c6 au1000: switch to 3.3 and add broken flag
SVN-Revision: 31893
2012-05-27 15:01:17 +00:00
Gabor Juhos e065d5cfbe au1000: add support for 3.3
Compile tested only.

SVN-Revision: 31892
2012-05-27 15:01:15 +00:00
Gabor Juhos de4c4d35e1 linux/3.1: R.I.P.
SVN-Revision: 31891
2012-05-27 15:01:09 +00:00
Gabor Juhos cead4b47ab omap24xx: remove 3.1 support
SVN-Revision: 31890
2012-05-27 15:01:07 +00:00
Gabor Juhos 7a4db11fbb omap24xx: switch to 3.3 and add broken flag
SVN-Revision: 31889
2012-05-27 15:01:05 +00:00
Gabor Juhos d004168445 cns3xxx: remove 3.1 support
SVN-Revision: 31888
2012-05-27 15:01:03 +00:00
Gabor Juhos 6f2ca5da39 cns3xxx: switch to 3.3 and add broken flag
SVN-Revision: 31887
2012-05-27 15:01:02 +00:00
Felix Fietkau 6f89cffc9a kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
SVN-Revision: 31886
2012-05-27 14:43:58 +00:00
Jonas Gorski ec7786c2ec bcm63xx: build images for DSL-274XB revision F1
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
Jonas Gorski 8aac009cc9 bcm63xx: add ath9k to atheros wifi profile
SVN-Revision: 31884
2012-05-27 13:22:48 +00:00
Jonas Gorski 4aa43122ab bcm63xx: enable bcm6328 support and required drivers
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
2012-05-27 13:22:46 +00:00
Jonas Gorski e5575fe335 bcm63xx: add support for DSL-274XB rev F1
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
Jonas Gorski a7a82db16f bcm63xx: fix port state after network down
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
2012-05-27 13:22:40 +00:00
Jonas Gorski e19ed52fd1 bcm63xx: add a fixup for ath9k devices
SVN-Revision: 31880
2012-05-27 13:22:37 +00:00
Jonas Gorski e34018cc9e bcm63xx: add support for the HSSPI controller
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
2012-05-27 13:22:33 +00:00
Jonas Gorski 099d5eec06 bcm63xx: add preliminary support for bcm6328
SVN-Revision: 31878
2012-05-27 13:22:29 +00:00
Jonas Gorski 7dbb132c88 bcm63xx: add flash type detection
SVN-Revision: 31877
2012-05-27 13:22:25 +00:00
Jonas Gorski b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
2012-05-27 13:22:22 +00:00
Jonas Gorski 226b030e44 bcm63xx: add a default switch configuration for DSL-274XB
SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
Jonas Gorski db1ff5c6fa bcm63xx: setup network config through uci-defaults
SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
Jonas Gorski 72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh
SVN-Revision: 31872
2012-05-27 13:22:11 +00:00
Jonas Gorski dd37687de0 bcm63xx: use the exact board id as board identification string
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
2012-05-27 13:22:08 +00:00
Felix Fietkau 230c0eb2cb kernel: fix a warning in the connmark module
SVN-Revision: 31856
2012-05-24 18:25:08 +00:00
Gabor Juhos 2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos c57409e79d ar71xx: fix an insignificant typo
Patch from #11485.

SVN-Revision: 31847
2012-05-23 21:05:30 +00:00
Gabor Juhos 013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
2012-05-23 21:05:25 +00:00
Gabor Juhos 758f670376 ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
2012-05-23 21:05:24 +00:00
Gabor Juhos e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
Gabor Juhos 1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
Gabor Juhos 1e1c0a5405 linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

SVN-Revision: 31841
2012-05-23 21:05:19 +00:00
Felix Fietkau 9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Felix Fietkau ce59af117c kernel: merge a net-next fq_codel backlog handling fix
SVN-Revision: 31813
2012-05-18 22:12:15 +00:00
Gabor Juhos 02c2f449d7 omap24xx: add support for 3.3
Compile tested only.

SVN-Revision: 31810
2012-05-18 20:22:32 +00:00
Gabor Juhos c2a2d59db5 cns3xxx: add support for 3.3
Compile tested only.

SVN-Revision: 31809
2012-05-18 20:10:53 +00:00
Gabor Juhos 1fd4bf270b linux/2.6.39: R.I.P.
SVN-Revision: 31808
2012-05-18 20:10:51 +00:00
Gabor Juhos 05c0d8b28e cns3xxx: sync kernel config
SVN-Revision: 31807
2012-05-18 20:10:48 +00:00
Gabor Juhos 9718f03e24 cns3xxx: remove 2.6.39 support
SVN-Revision: 31806
2012-05-18 20:10:46 +00:00
Gabor Juhos 9e78becbac cns3xxx: switch to 3.1
Compile tested only.

SVN-Revision: 31805
2012-05-18 20:10:44 +00:00
Gabor Juhos 07b5a3eea2 x86: remove support for old kernels
SVN-Revision: 31804
2012-05-18 20:10:42 +00:00
Gabor Juhos 604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides
SVN-Revision: 31803
2012-05-18 20:10:38 +00:00
Gabor Juhos d9dab97d38 x86/ep80579: switch to 3.3
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
2012-05-18 20:10:33 +00:00
Hauke Mehrtens c63ef04874 brcm47xx: fix nvram read out on devices with serial flash
detect nvram on Linksys E3200

SVN-Revision: 31790
2012-05-18 16:04:10 +00:00
Hauke Mehrtens 7ad663dda6 brcm47xx: bcma: fix null pointer
SVN-Revision: 31789
2012-05-18 15:46:30 +00:00
Hauke Mehrtens b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3
SVN-Revision: 31788
2012-05-18 15:45:51 +00:00
Hauke Mehrtens 7be88d2ad8 brcm47xx: some fixes for the USB driver
SVN-Revision: 31787
2012-05-18 15:44:25 +00:00
Gabor Juhos e3678eb33e cobalt: remove 2.6.39 specific patches
SVN-Revision: 31785
2012-05-18 09:59:22 +00:00
Gabor Juhos a5de52c244 x86/olpc: switch to 3.3
Compile tested only.

SVN-Revision: 31784
2012-05-18 09:57:32 +00:00
Gabor Juhos 9e54e012d6 x86: image: select bootscript images by default for OLPC
SVN-Revision: 31783
2012-05-18 09:57:29 +00:00
Felix Fietkau 3f62f5211a adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
SVN-Revision: 31781
2012-05-17 21:20:23 +00:00
Felix Fietkau 03babf3641 target: add a feature flag for RTC support
SVN-Revision: 31777
2012-05-17 15:28:09 +00:00
Hauke Mehrtens c30405070c kernel: add some missing config options added by r31756
SVN-Revision: 31774
2012-05-17 13:28:30 +00:00
Hauke Mehrtens 273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
SVN-Revision: 31772
2012-05-17 13:22:38 +00:00
Hauke Mehrtens 3491d8c017 brcm47xx: remove support for kernel 3.2
SVN-Revision: 31771
2012-05-17 13:20:10 +00:00
Gabor Juhos 562e468ae5 x86/thincan: switch to 3.3
Compile tested only.

SVN-Revision: 31765
2012-05-17 06:41:01 +00:00
Gabor Juhos 1f7f8376a6 x86/xen_domu: switch to 3.3
Compile tested only.

SVN-Revision: 31764
2012-05-17 06:41:00 +00:00
Gabor Juhos 8bb7ddecfd x86/kvm_guest: switch to 3.3
Compile tested only.

SVN-Revision: 31763
2012-05-17 06:40:58 +00:00
Gabor Juhos f14d1a588d x86/generic: switch to 3.3
Compile tested only.

SVN-Revision: 31762
2012-05-17 06:40:56 +00:00
Felix Fietkau 54edbfabac kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

SVN-Revision: 31756
2012-05-16 15:23:03 +00:00
Gabor Juhos eb2fe5e863 x86/alix2: switch to 3.3
Compile tested only.

SVN-Revision: 31753
2012-05-16 10:45:02 +00:00
Gabor Juhos fb7da5bbde x86/net5501: switch to 3.3
Compile tested only.

SVN-Revision: 31752
2012-05-16 10:44:59 +00:00
Gabor Juhos 9e049ce25c x86: sync 3.3 configs
SVN-Revision: 31751
2012-05-16 10:44:55 +00:00
Gabor Juhos 19f691f8e4 x86: sync 3.2 configs
SVN-Revision: 31750
2012-05-16 10:44:52 +00:00
Gabor Juhos 724fd5e657 x86: sync 2.6.39 configs
SVN-Revision: 31749
2012-05-16 10:44:49 +00:00
Gabor Juhos 637fd23428 linux/3.3: add missing symbol
SVN-Revision: 31748
2012-05-16 10:44:46 +00:00
Gabor Juhos 67675fd48d linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
It was missing in the previous commit.

SVN-Revision: 31738
2012-05-15 11:12:31 +00:00
Gabor Juhos 39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Felix Fietkau a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
SVN-Revision: 31736
2012-05-15 10:36:39 +00:00
John Crispin 364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin 07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin 9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos 2fceae7ec4 linux/3.0: R.I.P.
It is used by the broken omap35xx/gumstix target only.

SVN-Revision: 31717
2012-05-14 15:48:34 +00:00
Gabor Juhos a3d349a3b3 realview: remove 3.0 support
SVN-Revision: 31716
2012-05-14 15:48:32 +00:00
Gabor Juhos e2ecabd761 realview: switch to 3.3
SVN-Revision: 31715
2012-05-14 15:48:31 +00:00
Gabor Juhos 46c7d58726 realview: add 3.3 support
SVN-Revision: 31714
2012-05-14 15:48:29 +00:00
Gabor Juhos 8f629f2a22 linux/3.3: more missing config symbols
SVN-Revision: 31713
2012-05-14 15:48:23 +00:00
Felix Fietkau fab5ee9566 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450)
SVN-Revision: 31711
2012-05-14 14:00:01 +00:00
Hauke Mehrtens a798a81890 kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
SVN-Revision: 31710
2012-05-14 11:28:02 +00:00
Gabor Juhos b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Hauke Mehrtens 679b6a0722 amazon: fix section mismatch
SVN-Revision: 31707
2012-05-13 15:31:42 +00:00
Hauke Mehrtens abd74f86b4 amazon: update amazon target to kernel 3.3
This is just compile tested, my device is currently not working.

SVN-Revision: 31706
2012-05-13 15:10:40 +00:00
Gabor Juhos 60d3ffb49a gemini: remove 2.6.37 support
SVN-Revision: 31700
2012-05-13 12:04:04 +00:00
Gabor Juhos 672ff3de6e gemini: switch to 3.3
SVN-Revision: 31699
2012-05-13 12:04:02 +00:00
Gabor Juhos d0ac4c1f03 gemini: add support for 3.3
SVN-Revision: 31698
2012-05-13 12:03:59 +00:00
Hauke Mehrtens 482b99a660 brcm47xx: generate image for Linksys WRT610N V1
SVN-Revision: 31696
2012-05-13 00:16:57 +00:00
Hauke Mehrtens 31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.

SVN-Revision: 31695
2012-05-13 00:08:12 +00:00
Hauke Mehrtens 5acb0b72be brcm47xx: fix tg3 ssb patch
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
2012-05-12 23:59:12 +00:00
Gabor Juhos e710aeeab1 linux/2.6.38: R.I.P.
It is used only by the broken coldfire target.

SVN-Revision: 31688
2012-05-12 12:05:21 +00:00
Gabor Juhos 08ed044595 linux/2.6.37: R.I.P.
SVN-Revision: 31687
2012-05-12 12:05:19 +00:00
Gabor Juhos c8cede6aa7 linux: add broken flag to remaining targets which are using 2.6.37
SVN-Revision: 31686
2012-05-12 12:05:18 +00:00
Gabor Juhos a2efef024e iop32x: remove 2.6.37 support
SVN-Revision: 31685
2012-05-12 10:49:36 +00:00
Gabor Juhos a5d4de7da2 iop32x: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31684
2012-05-12 10:49:34 +00:00
Gabor Juhos 598fe0e93b iop32x: add 3.3 support
SVN-Revision: 31683
2012-05-12 10:49:32 +00:00
Gabor Juhos bf8e96712e sibyte: remove 2.6.37 support
SVN-Revision: 31682
2012-05-12 10:49:30 +00:00
Gabor Juhos edb129bb24 sibyte: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31681
2012-05-12 10:49:28 +00:00
Gabor Juhos fd651daa4b sibyte: add 3.3 support
SVN-Revision: 31680
2012-05-12 10:49:26 +00:00
Gabor Juhos 4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error
SVN-Revision: 31679
2012-05-12 10:49:23 +00:00
Gabor Juhos cabfa5b364 orion: remove the broken broken flag
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

SVN-Revision: 31674
2012-05-10 20:20:43 +00:00
Gabor Juhos ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310
SVN-Revision: 31673
2012-05-09 16:16:52 +00:00
John Crispin dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin 75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin 7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos 200227e0b4 kirkwood: add support for the ZyXEL NSA-310
SVN-Revision: 31669
2012-05-09 11:38:43 +00:00
Gabor Juhos 213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
2012-05-09 11:38:41 +00:00
Gabor Juhos d4876692c1 kirkwood: enable GPIO sysfs interface
SVN-Revision: 31667
2012-05-09 11:38:40 +00:00
Gabor Juhos d1eed108bb kirkwood: nuke 2.6.37 support
SVN-Revision: 31666
2012-05-09 11:38:39 +00:00
Gabor Juhos 861b9b25e0 kirkwood: switch to 3.3
SVN-Revision: 31665
2012-05-09 11:38:37 +00:00
Gabor Juhos b272041998 kirkwood: add 3.3 support
Based on the 3.2.9 patches by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31664
2012-05-09 11:38:36 +00:00
Gabor Juhos 500ec36515 ixp4xx: nuke 2.6.37 support
SVN-Revision: 31663
2012-05-09 10:48:44 +00:00
Gabor Juhos d25a4e7ddc ixp4xx: switch to 3.3
SVN-Revision: 31662
2012-05-09 10:48:43 +00:00
Gabor Juhos d5093de0b1 mpc85xx: remove 2.6.38 support
SVN-Revision: 31661
2012-05-09 10:48:41 +00:00
Gabor Juhos ab71a428c5 mpc85xx: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31660
2012-05-09 10:48:39 +00:00
Gabor Juhos db376b45d9 orion: nuke 3.0 support
SVN-Revision: 31659
2012-05-09 10:48:38 +00:00
Gabor Juhos 24e2385a59 orion: switch to 3.3 and add broken flag
It is compile tested only.

SVN-Revision: 31658
2012-05-09 10:48:37 +00:00
Gabor Juhos d640a15b73 linux/3.3: add missing RTC symbol
SVN-Revision: 31654
2012-05-09 10:48:30 +00:00
Gabor Juhos 93c9980b94 ar71xx: fix build error if PCI is disabled
SVN-Revision: 31646
2012-05-07 21:16:22 +00:00
Gabor Juhos 34018a630f kernel: update linux 3.3 to 3.3.5
SVN-Revision: 31645
2012-05-07 20:11:43 +00:00
Gabor Juhos 6b5012ce1f pxa: remove 2.6.37 support
SVN-Revision: 31643
2012-05-07 17:40:15 +00:00
Gabor Juhos 1f1fd8616f pxa: switch to 3.3 and mark it as broken
It is working in qemu, but it has not been tested on real hardware.

SVN-Revision: 31642
2012-05-07 17:40:09 +00:00
Gabor Juhos b284c0e804 pxa: add support for 3.3
SVN-Revision: 31641
2012-05-07 17:40:06 +00:00
Jo-Philipp Wich 1a01559520 atheros: Fix compilation
With our recent switch to the 3.3 kernel target, some headers were
occidentally omitted.

Signed-off-by: Jonathan Bither <jonbither@gmail.com>

SVN-Revision: 31640
2012-05-07 17:06:39 +00:00
Jonas Gorski b218b15709 bcm63xx: fix a race between PCI bus scan and fallback sprom registration
The fallback sprom handler was installed too late, resulting in ssb
failing to get a valid sprom on some devices.

Fixes #11384.

SVN-Revision: 31638
2012-05-06 21:25:34 +00:00
Felix Fietkau 0ff3c396d3 kernel: rewrite the phy packet hook, put it in the network stack to avoid having to keep non-upstream ethernet driver changes
SVN-Revision: 31637
2012-05-06 21:19:14 +00:00
Hauke Mehrtens d30f8da466 brcm47xx: add gpio_request_one()
This fixes a compile error with kernel 3.3.

SVN-Revision: 31635
2012-05-06 20:44:37 +00:00
Felix Fietkau 7799c88aa4 atheros: clean up the patches some more
SVN-Revision: 31626
2012-05-06 17:15:00 +00:00
Felix Fietkau 9b20187ad5 atheros: update to 3.3.4 (based on work by acoul), fix mvswitch driver for newer kernels
SVN-Revision: 31625
2012-05-06 17:08:30 +00:00
Jonas Gorski 30362b90af AR7: don't mark as broken
Linux 3.3.4 boots fine on my AR7 device.

SVN-Revision: 31623
2012-05-06 14:04:19 +00:00
Gabor Juhos 28e897845f ar7: remove 2.6.37 support
SVN-Revision: 31617
2012-05-05 17:32:43 +00:00
Gabor Juhos 047a51c4fd ar7: switch to 3.3 and mark the target as broken
SVN-Revision: 31616
2012-05-05 17:32:41 +00:00
Gabor Juhos dd884a6b73 ar7: add 3.3 support
SVN-Revision: 31615
2012-05-05 17:32:39 +00:00
Gabor Juhos e85a44f11b ar7: fix kernel_entry extraction
SVN-Revision: 31614
2012-05-05 17:32:36 +00:00
Gabor Juhos 9486904079 ar71xx: add profile and build image for the TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31610
2012-05-05 17:02:41 +00:00
Gabor Juhos ab897ab04e ar71xx: add support for the TP-Link TL-WR1041N v2 board
Patch-by: Vince Huang <axishero@foxmail.com>

SVN-Revision: 31608
2012-05-05 17:02:35 +00:00
Gabor Juhos 56f2e08537 ar71xx: update 3.3 patches
SVN-Revision: 31602
2012-05-05 13:56:35 +00:00
Gabor Juhos 8fffc6d6df ar71xx: fix a typo in the db120 mach file
Reported-by: Sven Eckelmann <sven@narfation.org>

SVN-Revision: 31601
2012-05-05 13:56:30 +00:00
Hauke Mehrtens 8c352ff853 brcm47xx: update target to kernel 3.3
SVN-Revision: 31599
2012-05-05 12:53:37 +00:00
Gabor Juhos 2e3f8c480e linux/2.6.32: R.I.P.
SVN-Revision: 31597
2012-05-05 11:43:34 +00:00
Gabor Juhos e005aed223 rdc: remove 2.6.32 support
SVN-Revision: 31596
2012-05-05 11:43:32 +00:00
Gabor Juhos 0e086cfaf7 rdc: switch to 3.3 and mark the target as broken
SVN-Revision: 31595
2012-05-05 11:43:30 +00:00
Gabor Juhos 787b253859 rb532: remove 2.6.32 support
SVN-Revision: 31594
2012-05-05 11:43:29 +00:00
Gabor Juhos 63a532a472 rb532: switch to 3.3 and mark the target broken
SVN-Revision: 31593
2012-05-05 11:43:26 +00:00
Gabor Juhos b120e7f22a rb532: add 3.3 support
SVN-Revision: 31592
2012-05-05 11:43:23 +00:00
Gabor Juhos 6caa1aab10 mpc83xx: remove broken flag
SVN-Revision: 31591
2012-05-05 11:43:21 +00:00
Gabor Juhos 257a201b56 mpc83xx: populate network config from an uci-default script
SVN-Revision: 31590
2012-05-05 11:43:19 +00:00
Gabor Juhos 13ce8f8a77 mpc83xx: cleanup rb333.dts
SVN-Revision: 31589
2012-05-05 11:43:16 +00:00
Gabor Juhos a3d9877518 mpc83xx: fix MAC addresses on the RB333
SVN-Revision: 31588
2012-05-05 11:43:13 +00:00
Gabor Juhos 1a5a9c5dae mpc83xx: fix build warnings in RB333/600 dtb wrappers
SVN-Revision: 31587
2012-05-05 11:43:10 +00:00
Gabor Juhos 7ffa3fe02c linux/2.6.32: fix layer7 patch
SVN-Revision: 31586
2012-05-05 07:20:13 +00:00
Imre Kaloz 9a91dc9f71 upgrade to 3.3, enable framebuffer
SVN-Revision: 31576
2012-05-03 21:51:58 +00:00
Jonas Gorski b393464fb4 adm5120: add missing NULL terminator to partition parser list
Fixes #11372.

SVN-Revision: 31574
2012-05-03 21:03:50 +00:00
Hauke Mehrtens 22b2e3fbb9 brcm47xx: add support for kernel 3.3
SVN-Revision: 31573
2012-05-03 20:18:41 +00:00
Gabor Juhos 3349cf2691 Fix iptables abuse of kernel header files. Use exported headers instead.
[juhosg: export xt_layer7.h for all kernel versions]

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31566
2012-05-03 09:43:10 +00:00
Gabor Juhos b0449ccf04 ramips: W306R V2.0 - GPIO and Network fixes
Fixed: GPIO typos and confirmed GPIO_BUTTON_RESET
Fixed: Lan & Wan reversed: swaped "eth0.2" with "eth0.1" by
       removing a line(default is correct), and reversed the
       Lan/wan layout LLLLW to WLLLL.

Added: image/Makefile now builds -factory.bin files. I am
       unsure of the accepted way to change the makefile but
       the name of the image needs to be 'linkn Kernel Image'
       in order to be accepted by the OEM firmware.

Known issue: eth0 (internal switch i think has mac address:
       00:11:22:33:44:55  but i think it should be same as
       the lan).
Known issue: Pressing the reset button has no noticable effect,
       i would expect the router to boot failsafe if being
       pressed on boot, reboot if short press and reset all
       to default if long press.

[juhosg: remove mtdlayout_W306R and use mtdlayout_4M instead]

Signed-off-by: David Pearce <david_18051985@hotmail.com>

SVN-Revision: 31557
2012-05-02 19:17:59 +00:00
Gabor Juhos 90e99b9fe8 ramips: Make serial console for DIR-300-B1 work again
Make serial console for DIR-300-B1 work again.

With some recent change, "console=ttyS1,57600" was removed from the
default kernel command line, this adds the necessary mkcmdline
incantation to image/Makefile to add it there for this target.
This is quite likely broken for other targets as well.

Without this the console switches to ttyS0 instead of ttyS1 and
kernel output is missing, and the userspace comes up with 9600 baud
instead of 57600.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31556
2012-05-02 19:17:58 +00:00
Gabor Juhos fb28062182 mpc83xx: remove 2.6.36 support
SVN-Revision: 31555
2012-05-02 18:27:26 +00:00
Gabor Juhos 3269924fed mpc83xx: switch to 3.3
SVN-Revision: 31554
2012-05-02 18:27:25 +00:00
Gabor Juhos 8ee595315d mpc83xx: add support for 3.3
SVN-Revision: 31553
2012-05-02 18:27:22 +00:00
Gabor Juhos b4b5f2d018 linux/3.3: add more missing symbols
SVN-Revision: 31552
2012-05-02 18:27:19 +00:00
Florian Fainelli 5d9b44d110 use a define for the poll and debounce interval
SVN-Revision: 31550
2012-05-02 15:40:26 +00:00
Gabor Juhos 7a2b3d8a55 linux/3.3: add more missing symbols
SVN-Revision: 31548
2012-05-01 08:00:26 +00:00
Gabor Juhos 70322ba3d1 move CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT to the target configs
SVN-Revision: 31547
2012-05-01 08:00:25 +00:00
Imre Kaloz 880de62f91 switch to 2.6.38
SVN-Revision: 31546
2012-05-01 07:00:17 +00:00
Gabor Juhos cbfce53831 kernel: update linux 3.3 to 3.3.4
SVN-Revision: 31541
2012-04-30 08:38:11 +00:00
Gabor Juhos e931ffd678 linux: rtl836x: add a generic reset_switch function
SVN-Revision: 31536
2012-04-29 18:29:31 +00:00
Gabor Juhos 1d9400263f linux: rtl836x: rename rtl836*_hw_init to rtl836*_setup
SVN-Revision: 31535
2012-04-29 18:29:29 +00:00
Gabor Juhos badd7a3cf2 linux: rtl836x: add a reset_chip callback to rtl8366_smi_ops
SVN-Revision: 31534
2012-04-29 18:29:26 +00:00
Gabor Juhos 3e3a4d3d6b ar71xx: allow to disable link polling on unused PHYs
SVN-Revision: 31533
2012-04-29 18:29:24 +00:00
Gabor Juhos a8d3109208 rb532: remove 2.6.35 support
The generic 2.6.35 support has been remove long time ago.

SVN-Revision: 31532
2012-04-29 16:56:07 +00:00
Gabor Juhos 532b74ff7b linux/3.3: refresh patches
SVN-Revision: 31531
2012-04-29 16:56:03 +00:00
Gabor Juhos 27a1f6652a rdc: add 3.3 support
SVN-Revision: 31530
2012-04-29 15:59:49 +00:00
Gabor Juhos c59b60fa0b mpc85xx: add support for 3.3
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31529
2012-04-29 15:55:28 +00:00
Gabor Juhos f687ca2296 orion: add 3.3 support
SVN-Revision: 31528
2012-04-29 15:20:40 +00:00
Gabor Juhos 923ebbac81 linux/3.3: yet another missing symbol
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31527
2012-04-29 15:08:24 +00:00
Gabor Juhos 55fdc18beb linux/3.3: add support for the Pericom PT7C4338 I2C RTC chip
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31525
2012-04-29 15:08:22 +00:00
Gabor Juhos f6d5998d31 mpc85xx: add kmod-booke-wdt to the default packages
Based on a patch by Wojciech Dubowik <Wojciech.Dubowik@neratec.com>

SVN-Revision: 31523
2012-04-29 15:00:38 +00:00
Gabor Juhos 296086868a mpc85xx: don't override CONFIG_WATHCDOG
SVN-Revision: 31521
2012-04-29 15:00:36 +00:00
Gabor Juhos 77735b5930 linux: move CONFIG_BOOKE_WDT to the generic config
SVN-Revision: 31520
2012-04-29 15:00:34 +00:00
Gabor Juhos 4fa9cf6c33 linux/2.6.36: R.I.P.
SVN-Revision: 31519
2012-04-29 15:00:33 +00:00
Gabor Juhos 3bc2afc384 linux: add broken flag to targets which are using 2.6.36
SVN-Revision: 31518
2012-04-29 15:00:32 +00:00
Gabor Juhos 417185b33c adm5120: create a new subtarget for the RB1xx devices
SVN-Revision: 31513
2012-04-29 07:36:46 +00:00
Gabor Juhos 7925eea45f adm5120: share a common kernel config between the subtargets
SVN-Revision: 31512
2012-04-29 07:36:44 +00:00
Gabor Juhos e96d52d198 adm5120: merge 3.3 patches
SVN-Revision: 31511
2012-04-29 07:36:43 +00:00
Gabor Juhos 19be4923e0 adm5120: remove 2.6.32 support
SVN-Revision: 31510
2012-04-29 07:36:37 +00:00
Gabor Juhos aa48f1326b adm5120: switch to 3.3.3
SVN-Revision: 31509
2012-04-29 07:36:36 +00:00
Gabor Juhos a1a0f67748 adm5120: fix macronix bootloc patch
SVN-Revision: 31508
2012-04-29 07:36:35 +00:00
Gabor Juhos 8e06682fb7 ramips: rt305x: extract wifi eeprom and use the 8M template for the UR-336UN
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31507
2012-04-29 07:36:33 +00:00
Gabor Juhos 1a0ef04231 adm8668: merge 3.3 fixes
SVN-Revision: 31497
2012-04-28 10:41:43 +00:00
Gabor Juhos 87ae19eaa3 adm8668: nuke 2.6.36 support
SVN-Revision: 31496
2012-04-28 10:39:47 +00:00
Gabor Juhos 9a7e9e76a3 adm8668: switch to 3.3
SVN-Revision: 31495
2012-04-28 10:38:53 +00:00
Florian Fainelli e047cf1899 switch to gpio-keys-polled
SVN-Revision: 31491
2012-04-27 16:44:48 +00:00
Gabor Juhos af2b3518af linux/3.3: yet another missing symbol
SVN-Revision: 31488
2012-04-27 06:31:43 +00:00
Felix Fietkau 34ffb526a2 build: rework verbosity level selection
V=99 and V=1 are now deprecated in favor of a new verbosity class system,
though the old flags are still supported.
You can set the V variable on the command line (or OPENWRT_VERBOSE in the
environment) to one or more of the following characters:

- s: stdout+stderr (equal to the old V=99)
- c: commands (for build systems that suppress commands by default, e.g. kbuild)
- w: warnings/errors only (equal to the old V=1)

SVN-Revision: 31484
2012-04-26 17:53:56 +00:00
Hauke Mehrtens d7b7b99d6e brcm47xx: BCMA - Modified PCI CFG space access
The existing code (prior to the patch) does an "ioremap_nocache" on a
subset of a memory region that I think has already been mapped, and then
un-maps that smaller region when it is finished.

Thanks Nathan Hintz for the patch

SVN-Revision: 31481
2012-04-25 20:32:17 +00:00
Gabor Juhos d8c7ac8a8a adm8668: add support for 3.3
SVN-Revision: 31480
2012-04-25 18:53:49 +00:00
Gabor Juhos 7f09ba740a adm8668: build gzip compressed uImage for testing
SVN-Revision: 31479
2012-04-25 18:53:48 +00:00
Gabor Juhos 15d641eee1 adm8668: use a suffix for initramfs images
SVN-Revision: 31478
2012-04-25 18:53:46 +00:00
Gabor Juhos a447f1810c ar71xx: enable MIB counters in the built-in switch of the AR934x
SVN-Revision: 31476
2012-04-25 13:02:11 +00:00
Gabor Juhos cad1fa359d adm5120: remove 2.6.38 support
SVN-Revision: 31475
2012-04-25 12:57:35 +00:00
Gabor Juhos 671361c7ea adm5120: add 3.3 support
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>

SVN-Revision: 31474
2012-04-25 12:57:33 +00:00
Gabor Juhos 43d67fa995 linux/3.3: fix compiler warnings in the plat_nand driver
SVN-Revision: 31473
2012-04-25 12:57:29 +00:00
Gabor Juhos 4319d95842 adm5120: make 5GXi depends on CPU_LITTLE_ENDIAN
SVN-Revision: 31472
2012-04-25 12:57:26 +00:00
Hauke Mehrtens e90d3f1663 brcm47xx: A couple of other (inconsequential) BCMA patches
Noticed these while reviewing the code.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31471
2012-04-24 21:56:42 +00:00
Hauke Mehrtens b07998cf11 brcm47xx: b44 fix workaround detection on some brcm47xx boards
Because of api change of nvram_getenv, the workaround failed to detect the hardware.

Based on patch by b.sander

Fixes #11268.

SVN-Revision: 31470
2012-04-24 20:35:46 +00:00
Jonas Gorski 8a38c62c07 bcm63xx: drop linux 3.2 support
SVN-Revision: 31464
2012-04-24 11:49:27 +00:00
Jonas Gorski 77219290e1 bcm63xx: drop linux 3.0 support
SVN-Revision: 31463
2012-04-24 11:49:24 +00:00
Jonas Gorski 49de6c1714 bcm63xx: switch kernel to 3.3
SVN-Revision: 31462
2012-04-24 11:49:19 +00:00
Gabor Juhos 59b0c1b2b9 ar71xx: TL-WR741NDv4: add WLAN LED config
On TP-Link TL-WR741ND version 4, the WLAN LED must be configured to work.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 31461
2012-04-24 11:38:44 +00:00
Jonas Gorski 8fd383ae2e kernel: update linux 3.3 to 3.3.3
SVN-Revision: 31460
2012-04-24 09:25:38 +00:00
Jonas Gorski 22b4e6b882 kernel: update linux 3.2 to 3.2.16
SVN-Revision: 31459
2012-04-24 09:25:35 +00:00
Jonas Gorski 7ccf25f7da kernel: add some more missing kernel config symbols
SVN-Revision: 31458
2012-04-24 09:25:32 +00:00
Jo-Philipp Wich ed957f7c84 enable NF_CONNTRACK_PROCFS for Linux 3.3, required for /proc/net/nf_conntrack (#11339)
SVN-Revision: 31454
2012-04-24 00:55:57 +00:00
Gabor Juhos 4b6833b176 x86: restore config-default, it is needed for 2.6.39
Reported-by: Thomas Heil <heil@terminal-consulting.de>

SVN-Revision: 31452
2012-04-23 16:56:08 +00:00
Gabor Juhos 1ab80c7817 ramips: rt305x: add support for the UR-336UN board
Patch-by: Lebedev Dmitry <lebedev@trendnet.ru>

SVN-Revision: 31451
2012-04-23 16:56:06 +00:00
Gabor Juhos 3626444c6d ramips: rt305x: add support for the Asus WL-330N3G board
This patch adds support for the ASUS WL-330N3G

Comparing to the WL-330N, It have 32MB ram, usb support and a bicolor led.

The bi-color led is driven by 2 gpio.
I don't know how to handle this, so I simply made 2 leds : one red, one blue.
But the red light takes precedence over the blue one according to the chart below.

r = led is red
b = led is blue
0 = led is off

xy= x->r for red, b for blue led, y->value of brightness in /sys/class/leds/x/brughtness

initial state	action	 led	gpio state

r0	b0	r0->r1	 r  	r0	b0
r0	b0	b0->b1   b	r0	b1

r1	b0	r1->r0	 0	r0	b0
r1	b0	b0->b1	 r	r1	*b1*

r1	b1	r1->r0   b	r0	b1
r1	b1	b1->b0   r	r1	b0

r0	b1	r0->r1   r	r1	*b1*
r0	b1	b1->b0   0	r0	r0

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31450
2012-04-23 16:56:05 +00:00
Florian Fainelli 34f4f4a0c5 switch to 3.3
SVN-Revision: 31448
2012-04-23 12:33:30 +00:00
Florian Fainelli 9e054eb21a add support for 3.3
SVN-Revision: 31447
2012-04-23 12:33:27 +00:00
Florian Fainelli 460ef32930 switch to 3.3.2
SVN-Revision: 31446
2012-04-23 12:33:24 +00:00
Florian Fainelli 5eeee1f80e add 3.3 support
SVN-Revision: 31445
2012-04-23 12:33:19 +00:00
John Crispin d4f3677cba Adding wifi eeprom extract for ARV752DPW - Easybox 802
Signed-off-by: Christian Rustmeier <rustmeier a.t. gmail dotty com>

SVN-Revision: 31443
2012-04-23 09:40:37 +00:00
Felix Fietkau dcd185c2f8 ar8216: enable forwarding of multicast frames to the cpu port on ar8327 (thx, SeG)
SVN-Revision: 31441
2012-04-22 19:19:49 +00:00
Claudio Mignanti 858a50b41c flexibity: Cleanup the subtarget config
SVN-Revision: 31440
2012-04-22 16:56:10 +00:00
Claudio Mignanti 6cd35fe3d3 tqma9263: update board definition for 3.x series and fix config choose
SVN-Revision: 31436
2012-04-22 09:09:53 +00:00
Claudio Mignanti 2852345af0 Remove old netus board definition
SVN-Revision: 31435
2012-04-22 09:09:50 +00:00
Gabor Juhos 755b97303e ep93xx: remove 2.6.39 support
SVN-Revision: 31434
2012-04-22 07:20:55 +00:00
Gabor Juhos 631bf82241 amazon: remove 2.6.3{0,2} support
SVN-Revision: 31433
2012-04-22 07:20:53 +00:00
Gabor Juhos 96b5d437d6 omap24xx: remove 2.6.38 support
SVN-Revision: 31426
2012-04-21 17:16:40 +00:00
Gabor Juhos 76448ed5cf xburst: remove 2.6.36 support
SVN-Revision: 31422
2012-04-21 17:03:10 +00:00
Gabor Juhos 0cdd676554 malta: remove 2.6.39 and 3.0 support
SVN-Revision: 31421
2012-04-21 16:56:15 +00:00
Gabor Juhos 0d148cb63b mpc83xx: remove 2.6.32 support
SVN-Revision: 31420
2012-04-21 16:51:59 +00:00
Gabor Juhos 884a4d47f0 octeon: remove 2.6.30 support
SVN-Revision: 31419
2012-04-21 16:45:32 +00:00
Gabor Juhos 26b3cdad1c cns3xxx: remove 2.6.31 support
SVN-Revision: 31418
2012-04-21 16:42:05 +00:00
Gabor Juhos b2b965a696 au1000: remove 2.6.39 support
SVN-Revision: 31416
2012-04-21 16:30:40 +00:00
Gabor Juhos f63d216467 x86: remove 2.6.32 support
SVN-Revision: 31415
2012-04-21 16:17:48 +00:00
Gabor Juhos bc2a7bfa70 ixp4xx: remove 2.6.3{2,8} and 3.0 support
SVN-Revision: 31414
2012-04-21 16:17:46 +00:00
Gabor Juhos 50610aa869 linux/2.6.31: R.I.P.
SVN-Revision: 31412
2012-04-21 15:18:58 +00:00
Gabor Juhos 2e5d3d2795 linux/2.6.30: R.I.P.
SVN-Revision: 31411
2012-04-21 15:18:55 +00:00
Gabor Juhos c6379f6295 linux: add broken flag to targets which are using 2.6.30
SVN-Revision: 31410
2012-04-21 15:18:54 +00:00
Gabor Juhos c627479641 linux/3.3: nuke the gpio_buttons patch
It is superseded by the in-kernel gpio-keys-polled driver.

SVN-Revision: 31409
2012-04-21 14:26:35 +00:00
Gabor Juhos 2d91cb94ac mpc52xx: nuke 3.2 config
SVN-Revision: 31408
2012-04-21 12:36:47 +00:00
Gabor Juhos 0a83f90e21 mpc52xx: switch to 3.3.2
SVN-Revision: 31407
2012-04-21 12:36:45 +00:00
Gabor Juhos e904724726 mpc52xx: add kernel config for 3.3
SVN-Revision: 31406
2012-04-21 12:36:44 +00:00
Gabor Juhos 5024ffb976 ramips: nuke 3.2 suport
SVN-Revision: 31405
2012-04-21 12:30:53 +00:00
Gabor Juhos 6c8ca78067 ramips: switch to 3.3.2
SVN-Revision: 31404
2012-04-21 12:30:51 +00:00
Gabor Juhos 5c325b0057 ramips: add support for 3.3
SVN-Revision: 31403
2012-04-21 12:30:50 +00:00
Gabor Juhos 7f902c962b ramips: rt305x: add OHCI/EHCI registration code for RT3352
SVN-Revision: 31402
2012-04-21 12:30:48 +00:00
Gabor Juhos 1645928135 ramips: rt305x: fix CPU clock detection on RT3352
SVN-Revision: 31401
2012-04-21 12:30:47 +00:00
Gabor Juhos fb69e28eaf ramips: rt305x: use different memory size setup for RT3352
SVN-Revision: 31400
2012-04-21 12:30:45 +00:00
Gabor Juhos 818aeba960 ramips: rt3883: add profile and build sysupgrade image for the RT-N56U
SVN-Revision: 31399
2012-04-21 12:30:44 +00:00
Gabor Juhos 6b677e1d22 ramips: add swconfig to the default package list
SVN-Revision: 31398
2012-04-21 12:30:43 +00:00
Gabor Juhos ced031a0b2 ramips: build initramfs image for the Fonera 2.0N
SVN-Revision: 31397
2012-04-21 12:30:42 +00:00
Gabor Juhos fc88a363c0 ramips: rt305x: add initial support for Tenda W306R V2.0
More device info at: http://wiki.openwrt.org/toh/tenda/w306r

Signed-off-by: David Pearce <David_18051985@hotmail.com.au>
[juhosg: fix checkpatch errors, remove kmod-phy and luci-ssl packages
from the profile, change broken GPIO number]

SVN-Revision: 31396
2012-04-21 12:30:40 +00:00
Gabor Juhos 88b5827c52 ramips: remove hardcoded console parameter from kernel configs
SVN-Revision: 31395
2012-04-21 12:30:30 +00:00
Gabor Juhos 1ffcaae700 linux/3.3: fix crypto4xx build failure
SVN-Revision: 31394
2012-04-21 10:47:04 +00:00
Mirko Vogt 87cdc0dd5b change /etc/config/network according to actual VLAN config to enable LAN port 4 on the ARV4520PW board
The VLAN mapping on the ARV4520PW board is the following:

port on Router: | VLAN in software:
LAN 1           | 3
LAN 2           | 2
LAN 3           | 1
LAN 4           | 0
DSL             | 4

So LAN4 is not VLAN4 but VLAN0 (VLAN4 is DSL port) -> set "3 2 1 0 5t" as default switch config.

SVN-Revision: 31391
2012-04-21 08:07:21 +00:00
Gabor Juhos 2624d67c08 ppc40x: nuke 3.2 support
SVN-Revision: 31387
2012-04-20 21:03:15 +00:00
Gabor Juhos f4833aa075 ppc40x: switch to 3.3.2
SVN-Revision: 31386
2012-04-20 21:03:14 +00:00
Gabor Juhos cfe4a6cb93 ppc40x: sync 3.3 config
SVN-Revision: 31385
2012-04-20 21:03:12 +00:00
Gabor Juhos 9140d4ee44 ar71xx: remove duplicated AP121 Kconfig entry
SVN-Revision: 31382
2012-04-20 16:50:16 +00:00
Gabor Juhos ef54b5736d cns21xx: remove 3.2 support
SVN-Revision: 31381
2012-04-20 15:25:00 +00:00
Gabor Juhos e667eb752b cns21xx: switch to 3.3.2
SVN-Revision: 31380
2012-04-20 15:24:59 +00:00
Gabor Juhos d1af548557 cns21xx: add support for 3.3
SVN-Revision: 31379
2012-04-20 15:24:57 +00:00
Gabor Juhos 434655d460 linux/3.3: update ARM mach-types
SVN-Revision: 31378
2012-04-20 15:24:54 +00:00
Claudio Mignanti 5c33f4e305 Add a missing symbol for config-3.3
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31373
2012-04-20 13:33:04 +00:00
Claudio Mignanti 701309ec11 Reorganize the subtargets, group subtargets per cpu family
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31372
2012-04-20 13:33:01 +00:00
Claudio Mignanti 3ac08ca653 Update the kernel to 3.3.x series, remove patches that doesn't apply anymore
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31371
2012-04-20 13:32:55 +00:00
Claudio Mignanti f50231aeb3 Ensure that the bin directory exists before copy the files
Signed-off-by: Claudio Mignanti <c.mignanti@gmail.com>

SVN-Revision: 31370
2012-04-20 13:27:16 +00:00
Florian Fainelli 147646fc66 remove some annoying warnings and fix snd modules build
SVN-Revision: 31365
2012-04-20 13:25:26 +00:00
Florian Fainelli eadf592371 add missing config symbol
SVN-Revision: 31364
2012-04-20 13:25:23 +00:00
Gabor Juhos da2cc2c79a ar71xx: nuke 3.2 support
SVN-Revision: 31360
2012-04-19 21:32:05 +00:00
Gabor Juhos 9854d6fb7f ar71xx: switch to 3.3.2
SVN-Revision: 31359
2012-04-19 21:31:58 +00:00
Gabor Juhos a6b4b5fd6e ar71xx: sync 3.3 config
SVN-Revision: 31358
2012-04-19 21:31:53 +00:00
Gabor Juhos ef97415b92 ar71xx: merge/reorganize 3.3 patches
SVN-Revision: 31357
2012-04-19 21:31:50 +00:00
Gabor Juhos 408de85883 ar71xx: use ap91_pci_init for RB751{,G}
SVN-Revision: 31356
2012-04-19 21:31:48 +00:00
Gabor Juhos 0a9832b50d ar71xx: move USB device registration directly into rb751{,g}_setup
SVN-Revision: 31355
2012-04-19 21:31:43 +00:00
Gabor Juhos 78967e6640 ar71xx: add ap9x_pci_get_wmac_data helper
SVN-Revision: 31354
2012-04-19 21:31:42 +00:00
Gabor Juhos 5c9ca38e47 ar71xx: add sanity checks to decode_rle
Also use -EINVAL instead of -1.

SVN-Revision: 31353
2012-04-19 21:31:40 +00:00
Gabor Juhos 8f921175ba avr32: remove old kernel support
SVN-Revision: 31352
2012-04-19 21:23:07 +00:00
Gabor Juhos 80705b9fb1 avr32: switch to 3.3.2
uClibc-0.9.33 causes segfaults at least in iptables.
The segfaults are present with 2.6.39 as well, so it
makes no sense to stick to that version.

SVN-Revision: 31351
2012-04-19 21:23:02 +00:00
Gabor Juhos abb57ea96f avr32: sync kernel config
SVN-Revision: 31350
2012-04-19 21:22:50 +00:00
Gabor Juhos 3108a4bb4b avr32: fix atomic64_t related kernel build errors
SVN-Revision: 31349
2012-04-19 21:22:48 +00:00
Florian Fainelli 26b3c31634 switch to 3.2.15
SVN-Revision: 31345
2012-04-18 15:36:33 +00:00
Florian Fainelli 2e641b13c0 fix 335-mips-kexec patch for all 3+ kernels
SVN-Revision: 31344
2012-04-18 15:36:30 +00:00
Jonas Gorski d0bfc67e2e kernel: x86: also update subtarget kernel versions
SVN-Revision: 31338
2012-04-17 21:01:43 +00:00
Jonas Gorski a8f2bc682e kernel: also update the targets to use 3.2.15
Thanks Gabor for spotting it.

SVN-Revision: 31337
2012-04-17 13:12:14 +00:00
Jonas Gorski 3a9b6dc313 kernel: update linux 3.3 to 3.3.2
SVN-Revision: 31336
2012-04-17 12:51:02 +00:00
Jonas Gorski ee4c47a134 kernel: update linux 3.2 to 3.2.15
SVN-Revision: 31335
2012-04-17 12:50:54 +00:00
Jo-Philipp Wich cfe30549a1 don't overwrite version.mk, substitute REVISION instead
SVN-Revision: 31327
2012-04-17 09:31:16 +00:00
Jo-Philipp Wich a0f0213462 bump to Linux v3.3.1
SVN-Revision: 31314
2012-04-16 15:04:47 +00:00
Jo-Philipp Wich 9d11e3395a Fix bufferbloat in PPPoATM TX queue
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31313
2012-04-16 15:04:45 +00:00
Jo-Philipp Wich 2036c23faa Update ppp TX restart patch to avoid race condition
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

SVN-Revision: 31312
2012-04-16 15:04:44 +00:00
John Crispin 83948d6385 adds 3.3 patches and files
SVN-Revision: 31307
2012-04-16 12:31:48 +00:00
Florian Fainelli fb2b2b958e backport missing platform data members for gpio-keys
SVN-Revision: 31306
2012-04-16 12:09:15 +00:00
Florian Fainelli e4f3867650 backport a missing eeprom 93cx6 define for building rt2x00
SVN-Revision: 31305
2012-04-16 12:09:13 +00:00
Florian Fainelli db728b6583 add missing debugging symbols
SVN-Revision: 31302
2012-04-16 11:38:35 +00:00
Florian Fainelli bb7cea7e65 add missing debugging symbols
SVN-Revision: 31301
2012-04-16 11:38:33 +00:00
Florian Fainelli c0ca7aed8e mark set but unused variables as such
SVN-Revision: 31296
2012-04-15 18:53:48 +00:00
Florian Fainelli a70ad13a79 refresh 2.6.32 patches
SVN-Revision: 31295
2012-04-15 18:53:45 +00:00
Florian Fainelli 47c8473475 refresh 2.6.32 patches
SVN-Revision: 31294
2012-04-15 18:53:42 +00:00
Florian Fainelli f2f5820d13 silence an annoying x86 warning
SVN-Revision: 31293
2012-04-15 18:53:39 +00:00
Hauke Mehrtens eb2191f5b0 at91: Missing kernel config symbols for AT91 target platform
I looked into buildbot snapshots and noticed that some platforms have
not successfully compiled for a long time. One example is at91, which
seems to be missing device-related kernel config symbols and the
snapshot build crashes already there.

Please find attached a patch that makes the at91 kernel config and
build to succeed again.

Signed off by: hannu.nyman@iki.fi

SVN-Revision: 31288
2012-04-15 09:50:51 +00:00
Hauke Mehrtens 7475bb3dc6 brcm47xx: fix a bug in the sprom handling of bcma, this broke all bcma based SoCs.
bcma: use fallback sprom if no on chip sprom is available

SVN-Revision: 31285
2012-04-14 12:12:22 +00:00
Hauke Mehrtens 62f0c3793b kernel: refresh patches
SVN-Revision: 31279
2012-04-13 19:37:15 +00:00
Hauke Mehrtens 6af575967c kernel: update bcma and ssb to version master-2012-04-12 from wireless-testing
SVN-Revision: 31278
2012-04-13 19:35:40 +00:00
Hauke Mehrtens c75e700d42 brcm47xx: remove support for kernel 3.0
SVN-Revision: 31276
2012-04-13 16:53:16 +00:00
Felix Fietkau 99768ccb7c ixp4xx: add support for linux 3.3.1
SVN-Revision: 31275
2012-04-13 13:38:49 +00:00
Felix Fietkau ec667208e6 kernel: fix arm compressed images build on mac os x
SVN-Revision: 31274
2012-04-13 13:38:45 +00:00
Jo-Philipp Wich 93b8648b15 don't overwrite version.mk, substitute REVISION instead
SVN-Revision: 31271
2012-04-13 10:47:45 +00:00
Jo-Philipp Wich 4b230e19fc PATCH: Disable console terminal in Grub for alix2 target
The alix2 target has the VGA console for grub enabled by default. This
prevents the grub menu from appearing on bootup. It is disabled by
default for the other embedded x86 platforms. This patch corrects that
behavior for the alix2 target.

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 31270
2012-04-12 23:30:27 +00:00
Jo-Philipp Wich 3cb72f38fd populate repositories.conf from version.mk
SVN-Revision: 31268
2012-04-12 23:08:13 +00:00
John Crispin e3889bcf7c update 3.2 patches
sync with lantiq kernel series

SVN-Revision: 31260
2012-04-12 12:33:56 +00:00
Jo-Philipp Wich 60a708edf1 remove preconfig variables
SVN-Revision: 31257
2012-04-12 09:43:43 +00:00
Jo-Philipp Wich d558632955 remove preconfig variables
SVN-Revision: 31256
2012-04-12 09:43:41 +00:00
Jo-Philipp Wich fcfdbd4961 add missing Kernel symbol spotted by buildbot
SVN-Revision: 31232
2012-04-10 10:09:27 +00:00
Imre Kaloz ed5abd5e4a add missing symbols
SVN-Revision: 31231
2012-04-09 17:03:02 +00:00
Jonas Gorski 50eba35cd3 kernel: update linux 3.3 to 3.3.1
SVN-Revision: 31223
2012-04-09 14:48:56 +00:00
Jonas Gorski 16b4cbcdd6 kernel: update linux 3.2 to 3.2.14
SVN-Revision: 31222
2012-04-09 14:48:51 +00:00
Jonas Gorski 1a57b05f47 kernel: add some more additional missing config symbols for 3.2 and 3.3
SVN-Revision: 31221
2012-04-09 14:48:46 +00:00
Mirko Vogt b0971e69f2 level up target xburst to linux kernel version 3.2.1
Thanks to the qi-hardware project - especially to Lars, Maarten and Xiangfu

SVN-Revision: 31218
2012-04-08 12:09:52 +00:00
Gabor Juhos f14fd53e3c ar71xx: image: build initramfs images for the WHR boards
SVN-Revision: 31209
2012-04-06 06:45:08 +00:00
Gabor Juhos e295a077ce ar71xx: initial support for Mikrotik RB751G-2HnD and RB751U-2HnD
Great collaboration on these two fantastic routers on the openwrt forum:
https://forum.openwrt.org/viewtopic.php?id=32320
Above all kudos to aryufan. Well done and thank you everyone else who
contributed.

To-Do: LED for wlan is not yet activated
To-Do: TxPower over 20dBm (RB751U) or 22dBm (RB751G) are not accepted by
the router

Signed-off-by: Hanno Schupp <hanno.schupp@gmail.com>
[juhosg: fix line wrapped patch, fix checkpatch errors, add missing
kernel patches]

SVN-Revision: 31208
2012-04-06 06:45:07 +00:00
Gabor Juhos fe6d66afe2 ar71xx: add rb750 to diag.sh
Support status led in diag.sh for RB750

Patch from: Evangelos Arkalis <arkalis.e@gmail.com>

SVN-Revision: 31207
2012-04-06 06:45:04 +00:00
John Crispin da3f3f8f9d add Easybox 802 - ARV752DPW
Implements the ARV752DPW architecture in mach-arv.c

Signed-off-by: Christian Rustmeier <rustmeier@gmail.com>

SVN-Revision: 31206
2012-04-05 20:03:21 +00:00
John Crispin 94af65db49 enable usb on dgn3500
A power-enable toggle gpio is not available, it is always on and protected with a resettable fuse.

Signed-off-by: Pieter Voorthuijsen<p.voorthuijsen at gmail.com>

SVN-Revision: 31205
2012-04-05 20:03:19 +00:00
Florian Fainelli b545c4b4fe generic: use magic_long in sysupgrade
Signed-off-by: Matthias Bücher <mail@maddes.net>

SVN-Revision: 31200
2012-04-04 16:06:29 +00:00
Florian Fainelli 930a820172 update wrt350nv2-builder to v2.4 and use new functionality for target orion_generic
Signed-off-by: Matthias Bücher <mail@maddes.net>

SVN-Revision: 31199
2012-04-04 16:06:25 +00:00
Florian Fainelli b47fc0f936 add support for D-Link DNS-323
this patch adds support for D-Link DNS323 storage device.
You can find more info here:

http://dns323.lukaperkov.net/

Currently you need serial cable to flash OpenWrt on DNS-323.

Signed-off-by: Luka Perkov < openwrt ->-to->- lukaperkov.net >

SVN-Revision: 31198
2012-04-04 15:53:55 +00:00
Florian Fainelli 90e89bf4a9 add missing DM/MD config symbols
SVN-Revision: 31197
2012-04-04 15:53:52 +00:00
Florian Fainelli 152f38a615 fix typos in adm5120 switch driver (#4241)
SVN-Revision: 31196
2012-04-04 15:53:15 +00:00
Florian Fainelli 09ade17a15 add Edimax specific MAGIC_MAC_BASE to read MAC from flash (#4241]
SVN-Revision: 31195
2012-04-04 15:53:12 +00:00
Florian Fainelli b180e0fb3b fix support for 2.6.38 kernel
This patch fixes the following issues I encountered while compiling kernel 2.6.38.8 for my Omnima Embedded Controller/Edimax BR6104KP:
    - kernel comes up with machine selection during build, even though everything was properly set in menuconfig
    - USB api changes
Successfully built and tested with r29755.

Signed-off-by: Hartmut Knaack <knaack.h [at] gmx.de>

SVN-Revision: 31194
2012-04-04 15:53:09 +00:00
Florian Fainelli f087e07b5c refresh 2.6.38 patches
SVN-Revision: 31193
2012-04-04 15:53:07 +00:00
Florian Fainelli db04bcb8e7 fix gcc-4.6 set but unused warnings
SVN-Revision: 31192
2012-04-04 15:53:04 +00:00
Florian Fainelli 30f0cb476f refresh patches
SVN-Revision: 31191
2012-04-04 15:53:01 +00:00
Jonas Gorski d87efd8c3c kernel: update linux 3.2 to 3.2.13 and refresh patches
Also remove a duplicate patch from lantiq (already in generic).

SVN-Revision: 31158
2012-04-01 07:56:55 +00:00
Jonas Gorski 1a395bd290 kernel: add some more missing kernel symbols for 3.2 and 3.3
SVN-Revision: 31157
2012-04-01 07:56:49 +00:00
Jonas Gorski 400ab1802f kernel: add some more missing serial 8250 config symbols
SVN-Revision: 31149
2012-03-30 08:11:01 +00:00
Jo-Philipp Wich e9c4d3d1f2 ramips: add support for the ARC FreeStation5 board, also fix WCR-150GN network setup while we're at it - thanks Pau Escrich <p4u@dabax.net> for the implementation
SVN-Revision: 31144
2012-03-29 16:03:04 +00:00
Hauke Mehrtens de0527a354 brcm47xx: fix memory leak, backport from the mainline kernel
SVN-Revision: 31143
2012-03-29 15:44:06 +00:00
Hauke Mehrtens 9992ce3a51 brcm47xx: add missing breaks into the nvram read code in the switch case statements
SVN-Revision: 31142
2012-03-29 15:43:16 +00:00
Felix Fietkau 5f87ce9150 kernel: restore ebtables functionality by running netfilter hooks when the ebtables module is loaded
SVN-Revision: 31141
2012-03-29 14:15:54 +00:00
Jonas Gorski f7df1eafc4 bcm63xx: enable bcm6368 for linux 3.3 and build images
Only build bcm6368 images when building for linux 3.3.

SVN-Revision: 31133
2012-03-28 20:42:37 +00:00
Jonas Gorski c7ae2fccb6 bcm63xx: add initial support for bcm6368 boards
SVN-Revision: 31132
2012-03-28 20:42:34 +00:00
Jonas Gorski 68f268a5eb bcm63xx: add driver for the internal hw trng on bcm6368
SVN-Revision: 31131
2012-03-28 20:42:30 +00:00
Jonas Gorski 78fb818f7c bcm63xx: replace SPI driver with latest upstream version
SVN-Revision: 31130
2012-03-28 20:42:25 +00:00
Jonas Gorski a2adca6ee9 bcm63xx: add ethernet support for bcm6368
Add basic support for the internal ethernet switch on bcm6368. It behaves
as a dumb switch for now, but allows basic connectivity.

Also drop the ethernet patch for bcm6345 for now, it needs rework.

SVN-Revision: 31129
2012-03-28 20:42:20 +00:00
Jonas Gorski 0876972850 bcm63xx: add missing bits from extirq support
Add missing external IRQ code parts for older chips in the new code.

SVN-Revision: 31128
2012-03-28 20:42:15 +00:00
Jonas Gorski 44d546290a bcm63xx: reorder patches
Reorder patches for a clearer distinction between the purposes of
the different patches.

SVN-Revision: 31127
2012-03-28 20:42:09 +00:00
Hauke Mehrtens 13b6ec1d05 brcm47xx: update flash drivers
SVN-Revision: 31126
2012-03-28 17:03:18 +00:00
Mirko Vogt 0ad9a02b9b Revert commit 31091 - "[target/xburst] remove set but unused variable which leads into compiling errors with GCC >= 4.6.0"
'set-but-unused-variable'-issues are dealt with in a generic way now

SVN-Revision: 31124
2012-03-28 15:28:21 +00:00
Mirko Vogt b4508ce183 deal with 'set-but-unused-variables' in a more generic way
SVN-Revision: 31123
2012-03-28 15:28:13 +00:00
Hauke Mehrtens 2f6e19e203 brcm47xx: BCMA - Consolidate/reduce code in bcma_device_name
Eliminate unneeded procedure by incorporating code into bcma_device_name

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31120
2012-03-28 09:36:50 +00:00
Hauke Mehrtens a31a9b8650 brcm47xx: BCMA - Always map 4 bytes
This probably doesn't matter, but reads/writes are always 4 bytes, so always map 4 bytes.

Changes since v1: Moved changes to new patch file (234-bcma-always-map-4-bytes.patch).

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 31119
2012-03-28 09:35:01 +00:00
Gabor Juhos b77217d963 ar71xx: boost SPI flash read performance
mtd_speedtest results:
                           page read speed
                    old         new        delta
DB120            929 KiB/s   2597 KiB/s   +179.55%
TL-WR1043ND v1   754 KiB/s   2166 KiB/s   +187.27%
TL-WR703N v1     745 KiB/s   2176 KiB/s   +192.08%
TL-MR3220 v1     752 KiB/s   2154 KiB/s   +186.44%
TL-WR2543ND v1   564 KiB/s   2130 KiB/s   +277.66%
TL-WR741ND v2    525 KiB/s   1767 KiB/s   +236.57%
ALFA-AP96        702 KiB/s   1977 KiB/s   +181.62%
WNDR3700         697 KiB/s   1965 KiB/s   +181.92%

SVN-Revision: 31118
2012-03-27 19:38:17 +00:00
Gabor Juhos 102c6df148 ar71xx: improve SPI flash read/write performance
mtd_speedtest results:

                        page write speed
                    old         new       delta
DB120            209 KiB/s   226 KiB/s     +8.13%
TL-WR1043ND v1   122 KiB/s   148 KiB/s    +21.31%
TL-WR703N v1     153 KiB/s   194 KiB/s    +26.80%
TL-MR3220 v1     130 KiB/s   156 KiB/s    +20.00%
TL-WR2543ND v1   158 KiB/s   202 KiB/s    +27.85%
TL-WR741ND v2    122 KiB/s   152 KiB/s    +24.59%
ALFA AP96        229 KiB/s   260 KiB/s    +13.54%
WNDR3700         202 KiB/s   223 KiB/s    +10.40%

                         page read speed
                    old        new       delta
DB120            691 KiB/s   929 KiB/s    +34.44%
TL-WR1043ND v1   372 KiB/s   754 KiB/s   +102.69%
TL-WR703N v1     375 KiB/s   745 KiB/s    +98.67%
TL-MR3220 v1     372 KiB/s   752 KiB/s   +102.15%
TL-WR2543ND v1   307 KiB/s   564 KiB/s    +83.71%
TL-WR741ND v2    315 KiB/s   525 KiB/s    +66.67%
ALFA AP96        515 KiB/s   702 KiB/s    +36.31%
WNDR3700         515 KiB/s   697 KiB/s    +35.34%

SVN-Revision: 31117
2012-03-27 19:38:15 +00:00
Gabor Juhos 6455178a6a ar71xx: image: build initramfs images for more boards
SVN-Revision: 31116
2012-03-27 19:38:13 +00:00
Gabor Juhos e2bd975a2a ar71xx: image: add MkuImage{Gzip,Lzma}/initramfs helpers
SVN-Revision: 31115
2012-03-27 19:38:11 +00:00
Gabor Juhos c7966a12b5 ar71xx: image: pass mtdlayout variables by value
SVN-Revision: 31114
2012-03-27 19:38:10 +00:00
Gabor Juhos 692e47f49f ar71xx: image: use MkuImageGzip in Image/Build/AthGzip/initramfs
SVN-Revision: 31113
2012-03-27 19:38:08 +00:00
Gabor Juhos 6cd5fb7001 ar71xx: remove the built-in MTD map of the AP96 board
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31112
2012-03-27 19:38:07 +00:00
Gabor Juhos 61ee283899 ar71xx: remove the built-in MTD map of the PB92 board
Pass the mtd_layout via the kernel command line instead

SVN-Revision: 31111
2012-03-27 19:38:05 +00:00
Gabor Juhos 1094dc1996 ar71xx: remove the built-in MTD map of the Zcomax devices
Pass the mtd_layout via the kernel command line instead.

SVN-Revision: 31110
2012-03-27 19:38:04 +00:00
Gabor Juhos 24554ef187 ar71xx: reclaim the 'user_property' partition on WHR-* boards
SVN-Revision: 31109
2012-03-27 19:38:02 +00:00
Gabor Juhos 87e4ec687b ar71xx: remove the built-in MTD maps of several boards
We are passing the MTD layout via the kernel command line, so
it makes no sense to duplicate it in mach-* files. The patch
removes the built-in MTD maps of the following boards:

 * AP113
 * ALFA N2/N5
 * DIR-600
 * DIR-615
 * DIR-825
 * TEW-6{3,5}2BRP
 * TEW-673GRU
 * WHR-G301N
 * WHR-HP-GN
 * WHR-HP-G300N

SVN-Revision: 31108
2012-03-27 19:38:01 +00:00
Gabor Juhos e6b685650b ar71xx: use modules for LED triggers
SVN-Revision: 31107
2012-03-27 19:37:59 +00:00
Gabor Juhos e28cd648b7 ar71xx: disable CONFIG_{I2C,SPI}_GPIO
SVN-Revision: 31104
2012-03-27 19:37:53 +00:00
Gabor Juhos 6627f45a87 ar71xx: sync 3.3 config
SVN-Revision: 31103
2012-03-27 19:37:52 +00:00
Gabor Juhos f4d1e3d147 ar71xx: fix button polarity on TL-WR703N and TL-WR741N v4
SVN-Revision: 31102
2012-03-27 19:37:51 +00:00
Gabor Juhos d495277d9f ramips: rt305x: build image for the DIR-615 rev D boards
Patch from #10105.

SVN-Revision: 31101
2012-03-27 19:29:59 +00:00
Gabor Juhos e4e24c5512 ramips: rt305x: add add support for the Asus WL-330N board
[juhosg: reorder several lines in order to keep things sorted
alphabetically]

Signed-off-by: Frédéric Leroy <fredo@starox.org>

SVN-Revision: 31100
2012-03-27 19:29:57 +00:00
Florian Fainelli af2c5df66a ppp: Fix high softirq utilization with pppoa
Users of the Geos platform are reporting high CPU utilization.
This seems to be rooted in a problem with the TX queue restart in PPP.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 31096
2012-03-27 17:47:44 +00:00
Florian Fainelli 8de1475a27 add missing INET_UDP_DIAG symbol
SVN-Revision: 31095
2012-03-27 17:47:41 +00:00
Florian Fainelli 60e195d399 geos: add 'tc' and kmod-sched for bonding
The Geos2 includes 2 ADSL+ interfaces, and as such it needs to have the TEQL scheduler for bonding.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 31094
2012-03-27 17:47:37 +00:00
Hauke Mehrtens a5abb08100 brcm47xx: update sprom patches like they are in the mainline kernel
SVN-Revision: 31093
2012-03-27 17:07:28 +00:00
Mirko Vogt ed8902d686 remove set but unused variable which leads into compiling errors with GCC >= 4.6.0
SVN-Revision: 31091
2012-03-27 16:29:19 +00:00
Hauke Mehrtens 6fd915ba37 brcm47xx: update usb driver to the version send for mainline kernel integartion
SVN-Revision: 31089
2012-03-27 15:38:56 +00:00
Felix Fietkau 5f799a0e97 ath9k: make endian check optional
Turns out it triggers on some AR71xx devices where no swapping should be done.
Enable endian check for the lantiq target.

SVN-Revision: 31084
2012-03-27 13:21:53 +00:00
John Crispin b982e8166b cleanup atheros wifi handling
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31064
2012-03-25 08:50:38 +00:00
John Crispin 5ea100c39b cleanup image makefile
SVN-Revision: 31063
2012-03-25 08:50:32 +00:00
John Crispin f27c030141 update /etc/uci-defaults/*
SVN-Revision: 31062
2012-03-25 08:50:30 +00:00
John Crispin ba4a7fca7b update profiles
SVN-Revision: 31061
2012-03-25 08:50:27 +00:00
John Crispin 0f6a9d5c7c bump kernel to 3.2.12
SVN-Revision: 31060
2012-03-25 08:50:09 +00:00
John Crispin f35b9a9a4c fixes breakage introduced in 776722ce36ac95877efb7fd771dde2f6ffc96433
SVN-Revision: 31054
2012-03-22 13:07:34 +00:00
Jens Muecke 1d2b19c4bf Disable keyboard for x86 default config - revoke patch 30966
This was already fixed by commit 30309 and is part of generic x86 target.

SVN-Revision: 31052
2012-03-21 19:10:02 +00:00
Gabor Juhos ff5b7ef713 linux: refresh patches against 3.3
SVN-Revision: 31047
2012-03-20 15:55:07 +00:00
Gabor Juhos 32e4801fb0 linux/3.{2,3}: yet another missing NET_VENDOR symbol
SVN-Revision: 31045
2012-03-20 15:55:04 +00:00
Gabor Juhos c8bf90d414 ar71xx: fix IRQ number for the AR7240 OHCI controller
SVN-Revision: 31044
2012-03-20 15:02:48 +00:00
Jo-Philipp Wich bf96743548 base-files: gracefully handle empty variables in preinit (#11155)
SVN-Revision: 31030
2012-03-19 20:37:12 +00:00
Gabor Juhos c1dc6df8bd kernel: update linux 3.2 to 3.2.12
SVN-Revision: 31028
2012-03-19 18:23:31 +00:00
Gabor Juhos f86e412389 ar71xx: disable unused file system drivers in the nand subtarget
SVN-Revision: 31027
2012-03-19 15:57:07 +00:00
Gabor Juhos b50cfe077c ar71xx: sync kernel configs
SVN-Revision: 31026
2012-03-19 15:57:06 +00:00
Gabor Juhos 8a2e4b49de ar71xx: add initial support for RB750GL
SVN-Revision: 31025
2012-03-19 15:57:04 +00:00
Gabor Juhos d19f3dd512 ar71xx: make rb750_latch_change 'static void'
SVN-Revision: 31024
2012-03-19 15:57:03 +00:00
Gabor Juhos 5348f46c80 ar71xx: add latch_change field to rb750_led_platform_data
SVN-Revision: 31023
2012-03-19 15:57:01 +00:00
Gabor Juhos 8a471efe01 ar71xx: add platform data for the RB750 NAND driver
SVN-Revision: 31022
2012-03-19 15:56:59 +00:00
Imre Kaloz cb41fa7655 upgrade to 3.2, disable ppp by default until we figure out why ppp_generic breaks bootup
SVN-Revision: 31020
2012-03-19 11:27:34 +00:00
Imre Kaloz 3fd38d99f2 add missing Kconfig symbols
SVN-Revision: 31019
2012-03-19 11:26:15 +00:00
Gabor Juhos e89df99083 ar71xx: use a different pll value on DB120
SVN-Revision: 31018
2012-03-19 11:11:22 +00:00
Gabor Juhos e9b45ebaba ar71xx: add AR934x specific interface speed setup for ge0
SVN-Revision: 31017
2012-03-19 11:11:20 +00:00
Gabor Juhos 6028889727 ar71xx: remove static MTD maps from AP121/DB120 boards
SVN-Revision: 31016
2012-03-19 11:11:19 +00:00
Felix Fietkau db6e326c56 targets: replace madwifi in profiles with ath5k, madwifi is unmaintained
SVN-Revision: 31015
2012-03-19 09:58:13 +00:00
Gabor Juhos 6ac12fbb3c ar71xx: use AR8327 on the DB120 board
SVN-Revision: 31012
2012-03-18 22:06:58 +00:00
Gabor Juhos faf82f3e10 generic: ar8216: add support for the AR8327 chip
SVN-Revision: 31011
2012-03-18 22:06:55 +00:00
Gabor Juhos fa7a83df4b generic: ar8216: allow to use more ports
SVN-Revision: 31010
2012-03-18 22:06:51 +00:00
Gabor Juhos 2ddbcb98ee generic: ar8216: reorder chip specific functions
SVN-Revision: 31009
2012-03-18 22:06:48 +00:00
Gabor Juhos 552cffd97a generic: ar8216: reorder switch_dev specific functions
SVN-Revision: 31008
2012-03-18 22:06:45 +00:00
Gabor Juhos 71e356029e generic: ar8216: use ar8216_sw_ prefix for switchdev related functions
SVN-Revision: 31007
2012-03-18 22:06:42 +00:00
Gabor Juhos 9a01936724 generic: ar8216: use switch_dev->ports in for loops
SVN-Revision: 31006
2012-03-18 22:06:40 +00:00
Gabor Juhos 2ce9e4753c generic: ar8216: add read_port_status field to ar8xxx_chip
SVN-Revision: 31005
2012-03-18 22:06:39 +00:00
Gabor Juhos 01cad79e03 generic: ar8216: add init_globals field to ar8xxx_chip
SVN-Revision: 31004
2012-03-18 22:06:36 +00:00
Gabor Juhos 56cacb3b21 generic: ar8216: add caps field to ar8xxx_chip
SVN-Revision: 31003
2012-03-18 22:06:33 +00:00
Gabor Juhos d1c585d4b1 generic: ar8216: add vtu_load_vlan field to ar8xxx_chip
SVN-Revision: 31002
2012-03-18 22:06:30 +00:00
Gabor Juhos 332310fba2 generic: ar8216: add vtu_flush field to ar8xxx_chip
SVN-Revision: 31001
2012-03-18 22:06:26 +00:00
Gabor Juhos d964410cbc generic: ar8216: add init_port field to ar8xxx_chip
SVN-Revision: 31000
2012-03-18 22:06:23 +00:00
Gabor Juhos 006b3b846e generic: ar8216: add setup_port field to ar8xxx_chip
SVN-Revision: 30999
2012-03-18 22:06:19 +00:00
Gabor Juhos eb5f0067b6 generic: ar8216: add hw_init field to ar8xxx_chip
SVN-Revision: 30998
2012-03-18 22:06:15 +00:00
Gabor Juhos a8371ad566 generic: ar8216: add a separate structure for chip specific stuff
Also add a hw_init function into that.

SVN-Revision: 30997
2012-03-18 22:06:12 +00:00
Gabor Juhos d18133b32d generic: ar8216: rename chip field of struct ar8216
SVN-Revision: 30996
2012-03-18 22:06:08 +00:00
Gabor Juhos 6e143e467f generic: ar8216: move ar8216_id_chip function
Also remove the inline annotation.

SVN-Revision: 30995
2012-03-18 22:06:05 +00:00
Gabor Juhos 1c99979b2c generic: ar8216: rename ar8216_ops to ar8216_sw_ops
SVN-Revision: 30994
2012-03-18 22:06:03 +00:00
Jo-Philipp Wich 884f964e62 alix2: add require crypto kmods (#10410)
SVN-Revision: 30980
2012-03-18 18:56:02 +00:00
Gabor Juhos 36e9a33df7 cns21xx: build uImage for the NS-K330
SVN-Revision: 30974
2012-03-18 12:07:56 +00:00
Gabor Juhos 89babcf633 cns21xx: remove 2.6.3x support
SVN-Revision: 30973
2012-03-18 12:07:51 +00:00
Gabor Juhos 776172531f cns21xx: switch to 3.2.9
SVN-Revision: 30972
2012-03-18 12:07:50 +00:00
Gabor Juhos 6dbe40f7d4 cns21xx: add support for 3.2
SVN-Revision: 30971
2012-03-18 12:07:48 +00:00
Jens Muecke deac1c16a1 Enable keyboard for x86
This is required for qemu like descripted in
here http://wiki.openwrt.org/doc/howto/qemu

SVN-Revision: 30966
2012-03-17 21:32:08 +00:00
Felix Fietkau 7b609a31be kernel: improve profiling support, keep static symbols when profiling is enabled
SVN-Revision: 30964
2012-03-17 13:03:14 +00:00
Florian Fainelli 9b60eb478a remove support for old kernels
SVN-Revision: 30963
2012-03-17 11:55:59 +00:00
Florian Fainelli a2a18fe1ea switch to 3.2
SVN-Revision: 30962
2012-03-17 11:55:56 +00:00
Florian Fainelli 6e2c0fbe9f add support for 3.2
SVN-Revision: 30961
2012-03-17 11:55:53 +00:00
Florian Fainelli 9ef8de0e0a add some more missing symbols
SVN-Revision: 30960
2012-03-17 11:55:49 +00:00
Gabor Juhos f601339e79 ar71xx: add profile and generate image for the JA76PF2 board
SVN-Revision: 30958
2012-03-16 18:00:40 +00:00
Gabor Juhos 6036151187 ar71xx: add support for the jjPlus JA76PF2 board
SVN-Revision: 30957
2012-03-16 18:00:34 +00:00
Gabor Juhos a680662391 ar71xx: change LED name prefix on the jjplus boards
SVN-Revision: 30956
2012-03-16 18:00:26 +00:00
Gabor Juhos 90279757bb mpc52xx: switch to 3.2.9
SVN-Revision: 30955
2012-03-16 15:35:00 +00:00
Felix Fietkau dd0f928b14 kernel: optimize out remaining netfilter hooks in the bridging code if bridge filtering is disabled
SVN-Revision: 30954
2012-03-16 09:21:59 +00:00
Felix Fietkau b957208807 swconfig: use a mutex instead of a spinlock, many swconfig calls sleep
SVN-Revision: 30952
2012-03-15 19:32:31 +00:00
Felix Fietkau 404a4c1fcd ar8216: fix a MTU related regression
Switch reset on AR8316 appears to clobber the MTU configuration register
and possibly other global config registers. Move global configuration
register init writes back to the reset callback.

SVN-Revision: 30951
2012-03-15 16:57:27 +00:00
Gabor Juhos c00b53f3d0 ar71xx: move micrel PHY driver to the generic linux target
SVN-Revision: 30946
2012-03-15 09:25:53 +00:00
Gabor Juhos 0011804302 linux/3.3: build mdio_register_board_info into the kernel if PHYLIB is selected
SVN-Revision: 30945
2012-03-15 09:25:49 +00:00
Gabor Juhos eb096bca59 linux/3.2: build mdio_register_board_info into the kernel if PHYLIB is selected
SVN-Revision: 30944
2012-03-15 09:25:47 +00:00
Hauke Mehrtens cee31ca238 brcm47xx: add support for NAND flash on devices using bcma
This patch add support for the NAND flash on BCM5357 based devices like the WNR3500Lv2.

Thank you Tathagata Das <tathagata@alumnux.com> for the patch

SVN-Revision: 30943
2012-03-14 22:59:39 +00:00
Hauke Mehrtens 7fee567dc0 brcm47xx: move and rename the patches
The patches are now grouped by the part what they are doing and are using three digest numbers.

This does not remove or adds anything

SVN-Revision: 30942
2012-03-14 21:48:23 +00:00
Jonas Gorski fab5be9b4f lantiq: load dwc_otg early
Needed for using external rootfs on usb sticks.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 30940
2012-03-14 10:59:52 +00:00
Gabor Juhos e3af7c82f8 generic: ar8216: merge multiple if statements in ar8216_hw_apply
SVN-Revision: 30928
2012-03-13 17:33:12 +00:00
Gabor Juhos 6a57a1fbdb imagebuilder: fix parallel building (closes #11117)
SVN-Revision: 30927
2012-03-13 17:29:40 +00:00
Gabor Juhos ff909edf94 ar71xx: ag71xx: fix ARP frame reception on AR934x switch ports
SVN-Revision: 30926
2012-03-13 17:29:38 +00:00
Gabor Juhos cd6a4cde13 ar71xx: ag71xx: start aneg on switch PHYs after reset
SVN-Revision: 30925
2012-03-13 17:29:37 +00:00
Gabor Juhos 7c9534cfd7 ar71xx: ag71xx: poll PHY status of all available switch ports
SVN-Revision: 30924
2012-03-13 17:29:36 +00:00
Gabor Juhos 8449eecf5f ar71xx: ag71xx: allow to use port 5 of the AR934x built-in switch
SVN-Revision: 30923
2012-03-13 17:29:34 +00:00
Gabor Juhos 1c5ac02a29 ar71xx: reset the switch on AR934x before ethernet device registration
SVN-Revision: 30922
2012-03-13 17:29:33 +00:00
Gabor Juhos 17d3131d3c ar71xx: fix a typo in ar71xx_regs.h
SVN-Revision: 30921
2012-03-13 17:29:31 +00:00
Florian Fainelli 07486c4d96 remove udc patch since it is unused
SVN-Revision: 30920
2012-03-13 14:06:44 +00:00