Commit Graph

35202 Commits (551c9c830027b7749895e3ba6b37004570b89e74)

Author SHA1 Message Date
Michael Lee 9a4935687d ramips: add support for DuZun DM06
DuZun DM06 is a develop board based on mt7628
64M RAM, 8M SPI Flash, 1 WAN, 1 LAN.
wm8960 codec with line out, line in and speaker output.

Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:43 +02:00
Michael Lee 49b7421836 ramips: enable wm8960 kernel menuconfig select option
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:43 +02:00
Michael Lee 6f61990d15 ramips: add i2s clocks
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:43 +02:00
Michael Lee 921d782eb7 ramips: update i2s dtsi files
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:42 +02:00
Michael Lee 9ff8928bb9 ramips: improve i2s drivers
* remove mt7620-wm8960.c use simple card and DTS to do it
* add old chips support
* add 12Mhz refclk setup. this is hard code. need use clock framework
  rewrite it
* add interrupt error status support for debug. default disable it.
  because it cause to many interrupts
* add setup bclk suport not hard code it
* add 24 bits support for mt7628. not verified
* use regmap api to control registers
* add txdma-req/rxdma-req DTS params for DMA use

Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:42 +02:00
Michael Lee 42bbe28cf1 ramips: add i2c clock
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:42 +02:00
Michael Lee 011ce1fad6 ramips: update i2c dtsi files
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:42 +02:00
Michael Lee d8202a8409 ramips: update i2c drivers
* add rt_i2c structure to store driver data
* rewrite read/write check function and add i2c error status check.
  so we don't need to wait until time out.
* add 10 bits address support. according to the data sheet i think
  it is possible. but i haven't verify it.
* the most important is start transfer only need once. otherwise
  it cause I2C_STARTERR status.
* add set i2c clock speed register by dts options "clock-frequency".
  not just hard code it.
* add mt7621 i2c driver. i just copy i2c-ralink.c and change register
  names. and the hardware don't support error status. so i remove it.
  but the logic is the same.

Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:42 +02:00
Michael Lee f36d624d88 ramips: add gdma hsdma dts info
Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:42 +02:00
Michael Lee f6fc591561 ramips: enhance dma engine support
* fix compiler error. device_control operation not support now.
* add old chips support 8 channels. new chips support 16 channels.
* add mt7621 hsdma driver. data sheet says it has two channels.
  but after test only one channel support.
* add memory to memory DMA support. i use dmatest kernel module to
  verify this function. on rt305x it will copy more data. on mt7621
  only two channels can works at the same time. these two chips
  maybe have hardware bugs. because on other chips don't have these bugs.
* use tasklet to handle remaining dma requests.

Signed-off-by: Michael Lee <igvtee@gmail.com>
2016-06-13 22:51:42 +02:00
John Crispin 3bb5f795d1 feeds.conf.default: disable management feed
looks like the upstream source packages were un-published.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00
John Crispin 9ba0dc602f ubox: update to latest git HEAD
this adds the new getrandom wrapper tool

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00
Alexey Brodkin c5bbb55bab toolchain/gdb: Use correct folder name for ARC patches
Even though ARC tools were released as arc-2016.03
we have a little bit different version name for GDB.
That's because both Binutils and GDB come from the same
git repo but from different branches (and so different tags).

Also removing an extra patch that made its way into release.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13 22:51:42 +02:00
Alexey Brodkin 1f0a9715d2 package/devel/gdb-arc: Add target GDB for ARC
ARC port of GDB is not yet upstream so we need to use
sources from Synopsys GitHub repo.

Given Synopys' commitment to upstream ARC support in GDB
in the nearest future it might be simpler to add a separate
package for ARC GDB instead of patching generic GDB package.
This way once ARC GDB stuff gets uptreamed we'll only need
to remove that new "gdb-arc" package.

Note 1 very minor change in generic gdb package was done -
it now depends on !arc (while "gdb-arc" depends on "arc").

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13 22:51:42 +02:00
John Crispin 8cc65914df ipq806x: move dts file to the files folder
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00
John Crispin 46cecfd6d7 ipg806x: set v4.4 as default
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00
Adrian Panella 53147c2237 ipq806x: add mangle bootargs options in config-4.4
Add config options to manage dual boot partitions, using MANGLE BOOTARGS

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
Adrian Panella 3d067c0132 ipq806x: base-files: add support for Linksys EA8500
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
John Crispin 2adc6468bf ipq806x: build Linksys EA8500 images
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
Adrian Panella bdaf558134 ipq806x: qcom rpm fix support for smb208
In commit "regulator: qcom: Rework to single platform device" the smb208
regulator used in IPQ8064 was left out.

Add it to that new framework and update Docs and DT accordingly.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
John Crispin 928163bad2 uboot-envtools: add ipq806x support
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Adrian Panella 2177a2a8cb mtd: add linksys_bootcount for ipq806x
Reset bc is needed for Linksys EA8500's dual boot.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Adrian Panella c354591d1b mac80211: ath10k fix otp check patch
Fix patch to match new updated package version

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
John Crispin b50b0cff2d lantiq: use new property name for eiu irqs
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
John Crispin d61af50cf3 lantiq: fix a regression in the eiu irq loading code
this worked in 3.18 but broke at some point. the old code that loaded a
irq table was incorrewct anyhow as it mapped the irqs int he domain which
should really be done when the driver using them loads them and not the
irq driver itself.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
John Crispin 027da34957 lantiq: add default lan setup to board.d script
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
John Crispin 62dc9831d3 package/*: update git urls for project repos
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
Rafał Miłecki 399d214d05 oseama: support extracting entity
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-13 22:53:07 +02:00
Rafał Miłecki cb0de9a68e bcm53xx: sysupgrade: move TRX specific code to separated function
This will allow adding support for other formats (e.g. Seama) in a clean
way.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-13 22:52:04 +02:00
Felix Fietkau 1beb5bec64 ar71xx: enable flow control for ethernet MACs with built-in switch
Should fix LAN speed issues on some devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-13 17:58:07 +02:00
Felix Fietkau c536da365b lantiq: add VLAN handling fixes to xrx200 ethernet driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-13 17:58:07 +02:00
Felix Fietkau 172eebbd28 lantiq: fold 0400-xrx200-net-multi-phy.patch into 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-13 17:58:07 +02:00
Pavel Kubelun 233ec51217 ath10k-firmware: add QCA9984 firmware
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-13 12:49:34 +02:00
Stefan Sydow 5610afe203 sparse: update to support llvm 3.5.0
sparse-0.5.0 won't link against lvm 3.5.0 as "llvm-config --libs" does not
include system libs like pthreads. This problem got fixed but not released
yet, so we need to fetch from their git repo.

Signed-off-by: Stefan Sydow <stefan.sydow@tu-berlin.de>
2016-06-13 12:49:34 +02:00
Álvaro Fernández Rojas 0aa6c7df60 kernel: update kernel 4.4 to version 4.4.13
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-12 15:51:54 +02:00
Felix Fietkau 1da87516e5 lantiq: change xrx200 ethernet driver WRED signal to global to fix spurious packet loss issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau 704965d93f uboot-envtools: add config for WBMR300 (lantiq)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau 37cfc23cb7 kernel: require admin permissions for swconfig set operations
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 12:03:20 +02:00
Felix Fietkau fecd715ef8 kernel: merge pending fq_codel backlog accounting fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:51:23 +02:00
Felix Fietkau df7af9317b ath10k: merge some pending stability fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:51:23 +02:00
Felix Fietkau 69c99a423a lantiq: enable swconfig LED support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau cc3bfdb62f lantiq: enable SMP for XRX200
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau 2d48f93ff4 lantiq: add Buffalo WBMR-300HPD support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau cc87d144e1 lantiq: refresh xrx200 kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau 2cf67832ec lantiq: remove dummy ltq_machine_power_off to fix gpio-poweroff drivers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Felix Fietkau eed2f24c0d kernel: fix mips MT_SMP kernel crash on cache flush
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:49:13 +02:00
Jo-Philipp Wich 9e45f9d63c polarssl: enable AES-GCM and CAMELLIA-GCM ciphersuites
Recent versions of Chrome require this ciphers to successfully handshake with
a TLS enabled uhttpd server using the ustream-polarssl backend.

If `CONFIG_GCM` is disabled, `ssl_ciphersuite_from_id()` will return `NULL`
when cipher `0x9d` is looked up, causing the calling `ssl_ciphersuite_match()`
to fail with `POLARSSL_ERR_SSL_INTERNAL_ERROR`.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-11 03:24:57 +02:00
Rafał Miłecki 1f86257c2f bcm53xx: pass datasize to mtd in hexadecimal format
This avoids extra calculation in bash script.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:38:00 +02:00
Rafał Miłecki 4b03e4ac3b mtd: fix typo in error message for 'c' option
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:37:49 +02:00
Rafał Miłecki c40e96d133 bcm53xx: fix partition typos in 09_fix_crc
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:37:41 +02:00