openwrt

Commit Graph

Author	SHA1	Message	Date
Mathias Kresin	53624c1702	ramips: fix dtc warnings Fix individual boards dtc warnings or obvious mistakes. Signed-off-by: Mathias Kresin <dev@kresin.me>	2018-08-04 08:39:35 +02:00
Chuanhong Guo	c9c4b2116c	ramips: Use dts alias based status led Also fix several typos in led node name. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>	2018-07-16 15:12:18 +02:00
INAGAKI Hiroshi	189815462c	ramips: add support for ELECOM WRC-1167GHBK2-S ELECOM WRC-1167GHBK2-S is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - MT7621A (2-Cores, 4-Threads) - 128 MB of RAM (DDR3) - 16 MB of Flash (SPI) - 2T2R 2.4/5 GHz - MediaTek MT7615D - 5x 10/100/1000 Mbps Ethernet - 6x LEDs, 2x keys - UART header on PCB - Vcc, GND, TX, RX from ethernet port side - baudrate: 57600 bps Flash instruction using factory image: 1. Rename the factory image to "wrc-1167ghbk2-s_v0.00.bin" 2. Connect the computer to the LAN port of WRC-1167GHBK2-S 3. Connect power cable to WRC-1167GHBK2-S and turn on it 4. Access to "http://192.168.2.1/details.html" and open firmware update page ("手動更新（アップデート）") 5. Select the factory image and click apply ("適用") button 6. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>	2018-06-19 20:46:21 +02:00

Author

SHA1

Message

Date

Mathias Kresin

53624c1702

ramips: fix dtc warnings

Fix individual boards dtc warnings or obvious mistakes.

Signed-off-by: Mathias Kresin <dev@kresin.me>

2018-08-04 08:39:35 +02:00

Chuanhong Guo

c9c4b2116c

ramips: Use dts alias based status led

Also fix several typos in led node name.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

2018-07-16 15:12:18 +02:00

INAGAKI Hiroshi

189815462c

ramips: add support for ELECOM WRC-1167GHBK2-S

ELECOM WRC-1167GHBK2-S is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7621A.

Specification:

- MT7621A (2-Cores, 4-Threads)
- 128 MB of RAM (DDR3)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz
  - MediaTek MT7615D
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 2x keys
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - baudrate: 57600 bps

Flash instruction using factory image:

1. Rename the factory image to "wrc-1167ghbk2-s_v0.00.bin"
2. Connect the computer to the LAN port of WRC-1167GHBK2-S
3. Connect power cable to WRC-1167GHBK2-S and turn on it
4. Access to "http://192.168.2.1/details.html" and open firmware
update page ("手動更新（アップデート）")
5. Select the factory image and click apply ("適用") button
6. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>

2018-06-19 20:46:21 +02:00

3 Commits (53624c1702e6aad5b3e5e442c064dd30f81db2e4)