Commit Graph

10082 Commits (4f1ff28f086da25b122cc29c4c468a33eb7ec891)

Author SHA1 Message Date
Gabor Juhos f5d8d80ca9 generic: rtl8367b: fix rtl8367b_extif_init_of
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36229
2013-04-06 17:03:09 +00:00
Gabor Juhos 32d3b456f0 linux/3.8: add more missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36228
2013-04-06 16:56:47 +00:00
Gabor Juhos 89539462a8 linux/3.8: add missing symbol
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36226
2013-04-06 16:38:36 +00:00
Gabor Juhos 1ef39b43dd ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36223
2013-04-06 12:37:40 +00:00
Gabor Juhos d57e662cda ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36222
2013-04-06 12:37:38 +00:00
Gabor Juhos 4becd8590c ramips: rt3883: enable the RTL8367 driver
That is needed by the Asus RT-N56U board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36221
2013-04-06 12:37:37 +00:00
Gabor Juhos 38bd9b4337 generic: rtl8367: allow to load extif config from OF
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36220
2013-04-06 12:37:36 +00:00
Gabor Juhos 585d19d168 generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36219
2013-04-06 12:37:34 +00:00
Gabor Juhos 68c931c637 generic: rtl8367: add vendor prefix to the compatible string
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36218
2013-04-06 12:37:32 +00:00
Gabor Juhos 348640f4b3 ramips: rt3883: sync 3.8 config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36217
2013-04-06 12:37:31 +00:00
John Crispin d16de0b69f fix typo pinmmux -> pinmux
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36216
2013-04-06 11:46:34 +00:00
Gabor Juhos f78c902cfd kernel: update linux 3.8 to 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36215
2013-04-06 11:40:44 +00:00
Gabor Juhos 202fb45deb refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36214
2013-04-06 11:40:41 +00:00
John Crispin df7af06f1f fix dir-615 h1 network config
http://patchwork.openwrt.org/patch/3527/

Signed-off-by: Daniel Petre <dani@ip6.ro>

SVN-Revision: 36213
2013-04-05 23:37:45 +00:00
John Crispin e1a74d8ff7 fix typo that made gpiomuxing fail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36212
2013-04-05 23:10:42 +00:00
Florian Fainelli 495296bba9 malta: add le64 and be64 sub targets
These two subtargets are used to build a 64-bit malta kernel along with
64-bit userland support.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36211
2013-04-05 12:36:48 +00:00
Florian Fainelli 12b925dcbf malta: move 32-bits options to subtarget config
Preliminary change to add support for MIPS64-based malta subtargets.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36210
2013-04-05 12:36:45 +00:00
Florian Fainelli 5eb8ba7f19 malta: move endianness kernel configuration to subtarget
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36209
2013-04-05 12:36:41 +00:00
Florian Fainelli 46dfa04a08 malta: enable mips16 feature flag
The malta platform supports mips16 advertise this feature flag.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36203
2013-04-05 12:36:16 +00:00
John Crispin d9bb7ff7a5 Migrate lantiq platform to common led helper functions
http://patchwork.openwrt.org/patch/3316/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36187
2013-04-03 10:01:07 +00:00
John Crispin a4c745ee74 add a missing patch that makes board detection work again
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36186
2013-04-03 10:01:03 +00:00
John Crispin c838ec2391 Patch for invoking (pre)init
http://patchwork.openwrt.org/patch/3485/

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 36183
2013-04-03 10:00:50 +00:00
John Crispin 93899a1329 add profile for tenda w150m board
http://patchwork.openwrt.org/patch/3371/

Signed-off-by: Chi Zhang <zhangchi866@gmail.com>

SVN-Revision: 36176
2013-04-03 10:00:21 +00:00
John Crispin 7e54357bd5 fix ALL5002 default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36175
2013-04-03 10:00:16 +00:00
John Crispin 37401dca92 Build WW factory image for DAP-1350
http://patchwork.openwrt.org/patch/3466/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36174
2013-04-03 10:00:12 +00:00
John Crispin 910b705155 add Huawei D105
http://patchwork.openwrt.org/patch/3510/

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 36173
2013-04-03 10:00:08 +00:00
John Crispin c1710901c5 add profile for the Edimax 3g-6200NL board
http://patchwork.openwrt.org/patch/3214/

Signed-off-by: Cédric Le Moing <cedric.le-moing@laposte.net>

SVN-Revision: 36172
2013-04-03 10:00:03 +00:00
John Crispin f3643374c4 there is no ttyS1 console
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36171
2013-04-03 09:59:59 +00:00
John Crispin 99e0ff1123 make v3.8 the default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36170
2013-04-03 09:59:55 +00:00
John Crispin c8d5f5e0ef add new image/Makefile
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36169
2013-04-03 09:59:51 +00:00
John Crispin 770b28f146 add the dts files that describe the boards in future
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36168
2013-04-03 09:59:46 +00:00
John Crispin 2328e8389e fix upvel profile names
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36167
2013-04-03 09:59:41 +00:00
John Crispin 94972a5268 fix rt3883 config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36166
2013-04-03 09:59:37 +00:00
John Crispin 0716ae8abe fix rt305x config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36165
2013-04-03 09:59:33 +00:00
John Crispin dce4945972 mark rt288x broken until the test hardware arrives in the mail
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36164
2013-04-03 09:59:16 +00:00
John Crispin 46f141637c add patches for v3.8
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36163
2013-04-03 09:59:10 +00:00
John Crispin 4f86ea43ca remove old ralink 3.8 patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36162
2013-04-03 09:58:48 +00:00
John Crispin d4db00205d move files to files-3.7
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36161
2013-04-03 09:58:44 +00:00
John Crispin 86a691144b add feature gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36160
2013-04-03 09:58:37 +00:00
John Crispin 1105bd2897 add OF support to rtl8367b driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36159
2013-04-03 09:58:33 +00:00
John Crispin cc34858d4a make firmware loading work on v3.9
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36158
2013-04-03 09:58:28 +00:00
Felix Fietkau 72f5901eb1 mpc85xx: enable ath9k and wpad-mini by default
SVN-Revision: 36142
2013-04-01 09:53:29 +00:00
Hauke Mehrtens 98ef9e5411 brcm47xx: generate images for Linksys E.... models
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36139
2013-03-27 15:51:28 +00:00
Hauke Mehrtens b4eabad019 gemini: remove usage of ehci_port_power() it was removed in kernel 3.8
SVN-Revision: 36138
2013-03-27 15:48:07 +00:00
Hauke Mehrtens 31c9452120 brcm47xx: activate image generation for some Netgear devices which are on the market and should be supported.
SVN-Revision: 36137
2013-03-27 15:35:52 +00:00
Hauke Mehrtens a9e5a178ef brcm47xx: generate images for more WRT...N models
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 36136
2013-03-27 15:34:55 +00:00
Imre Kaloz b92e750027 upgrade to 3.9-rc4, disable unsupported boards
SVN-Revision: 36128
2013-03-25 14:18:32 +00:00
Imre Kaloz c90078ce87 refresh patches against -rc4
SVN-Revision: 36127
2013-03-25 13:53:48 +00:00
Imre Kaloz f26378fd7c add missing symbols
SVN-Revision: 36126
2013-03-25 13:53:17 +00:00
Gabor Juhos f7da2127ab ar71xx: fix ethernet LEDs on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36122
2013-03-25 06:40:03 +00:00
Gabor Juhos 39c132d154 ar71xx: add GPIO output select values for AR934x
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36121
2013-03-25 06:40:00 +00:00
Gabor Juhos 849201b1d8 ar71xx: add default LED configuration for the WL-WRD3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36120
2013-03-24 21:07:21 +00:00
Gabor Juhos cd5cca4ba8 ar71xx: fix USB power GPIO on the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36119
2013-03-24 19:23:47 +00:00
Gabor Juhos 4daefc9480 ar71xx: remove numeric suffix of the TL-WDR3500 USB LED
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36118
2013-03-24 19:23:45 +00:00
Gabor Juhos a4a2a7189f ar71xx: add diag support for the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36117
2013-03-24 19:23:43 +00:00
Gabor Juhos 38c991311b ar71xx: add default switch configuration for the TL-WDR3500
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36116
2013-03-24 19:23:36 +00:00
Hauke Mehrtens bb81e695f9 kernel: add missing config options for au1000 target
SVN-Revision: 36115
2013-03-24 14:01:38 +00:00
Hauke Mehrtens 18c47be19a kernel: add missing CONFIG_BLK_DEV_IDE_AU1XXX config option.
SVN-Revision: 36102
2013-03-21 14:56:04 +00:00
Hauke Mehrtens 4995f23669 kernel: REGMAP_SPI should only be selectable when SPI_MASTER is selected
This was turned from a silent confg option without a text to a normal
config option which could be selected without any other option
depending on this. This could cause the situation where REGMAP_SPI was
selected without SPI_MASTER being selected.

SVN-Revision: 36101
2013-03-21 14:50:59 +00:00
Hauke Mehrtens d5cf67297a brcm47xx: generate images for some more devices
These devices should be supported by trunk now.

SVN-Revision: 36099
2013-03-20 22:01:18 +00:00
Hauke Mehrtens c9544f4af0 kernel: add some fixes for kernel 3.9
This patch fixes some compile problems with kernel 3.9 and adds some missing linux 3.9 handling into kernel packages.

SVN-Revision: 36098
2013-03-20 21:59:24 +00:00
Hauke Mehrtens 99638c5288 kernel: add some missing config options for kernel 3.9
SVN-Revision: 36097
2013-03-20 21:53:51 +00:00
Florian Fainelli b1cc7a90a4 kernel: make SND_COMPRESS_OFFLOAD symbol visible for selection (#13193)
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36091
2013-03-19 14:13:39 +00:00
Florian Fainelli fe157ea1ba uml: remove 3.6 kernel patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36080
2013-03-17 19:47:04 +00:00
Florian Fainelli 1898218119 uml: remove 3.3. kernel patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36079
2013-03-17 19:46:59 +00:00
Florian Fainelli c36db5f66a uml: switch to 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36078
2013-03-17 19:46:54 +00:00
Florian Fainelli a987d1aaa3 uml: add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36077
2013-03-17 19:46:49 +00:00
Florian Fainelli 499f92c3db uml: remove 3.2 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36076
2013-03-17 19:46:43 +00:00
Florian Fainelli ce33aaafcf ep93xx: switch to 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36075
2013-03-17 19:46:37 +00:00
Florian Fainelli a5551d366a kernel: refresh 3.9 patches
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36074
2013-03-17 19:46:32 +00:00
Florian Fainelli 472bb8d51a ep93xx: add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36073
2013-03-17 19:46:25 +00:00
Florian Fainelli 743e9e7009 ep93xx: account for sound soc directory rename in 3.7
sound/soc/ep93xx -> sound/soc/cirrus

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36071
2013-03-17 19:45:55 +00:00
Florian Fainelli 6a7100c760 kernel: set regmap-core module license
Fixes the following issues:
[    7.660000] regmap_core: module license 'unspecified' taints kernel
[    7.690000] Disabling lock debugging due to kernel
[    7.700000] regmap_core: Unknown symbol lzo1x_decompress_safe (err 0
[    7.710000] regmap_core: Unknown symbol lzo1x_1_compress (err 0
[    7.720000] regmap_core: Unknown symbol devres_add (err 0
[    7.730000] regmap_core: Unknown symbol debugfs_create_bool (err 0
[    7.750000] regmap_core: Unknown symbol devres_alloc (err 0
[    7.760000] regmap_core: Unknown symbol debugfs_remove_recursive (err 0
[    7.770000] regmap_core: Unknown symbol debugfs_create_file (err 0
[    7.780000] regmap_core: Unknown symbol devres_free (err 0
[    7.800000] regmap_core: Unknown symbol devres_find (err 0
[    7.810000] regmap_core: Unknown symbol debugfs_create_dir (err 0)

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36070
2013-03-17 19:45:48 +00:00
Florian Fainelli 7987c8d0dc au1000: remove support for 3.3. kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36067
2013-03-17 14:33:47 +00:00
Florian Fainelli c56c18168e au1000: switch to 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36066
2013-03-17 14:33:41 +00:00
Florian Fainelli 5592a619d0 au1000: keep the MTX-1 watchdog pin low during boot
Do this until the watchdog driver is loaded and the user-space watchdog
daemon can start pinging the watchdog.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36065
2013-03-17 14:33:36 +00:00
Florian Fainelli d5c2e83fa5 ep93xx: remove 3.3 kernel support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36064
2013-03-17 14:33:23 +00:00
Florian Fainelli 9cef30a519 mcs814x: use devm_request_and_ioremap in mcs814x-rng driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36063
2013-03-17 14:33:18 +00:00
Florian Fainelli 8ed2299646 mcs814x: use devm_request_and_ioremap helper for nuport_mac driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36062
2013-03-17 14:33:13 +00:00
Florian Fainelli 8bc84bac31 mcs814x: remove PCI code
None of the boards we support are using it nor have it wired out of the
SoC, just remove it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36061
2013-03-17 14:33:07 +00:00
Florian Fainelli a9ef927cce mcs814x: implement MULTI_IRQ_HANDLER
Allows us to get rid of the IRQ entry point assembly

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36060
2013-03-16 22:25:47 +00:00
Florian Fainelli 18908139f3 mcs814x: use the standard device tree binding to represent a PHY node
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36059
2013-03-16 22:25:41 +00:00
Gabor Juhos 1996cfe9dd mpc85xx: add profile and build image for the TL-WDR4900 v1 board
Now that the ethernet switch is working, create firmware
images to make impatient users happy.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36051
2013-03-15 16:11:45 +00:00
Gabor Juhos 72253b9073 generic: ar8216: start AR8327 switch from the probe routine
The AR8327 switch gets its configuration from platform
data or from the device-tree. This allows to start it
from the probe routine. Doing so makes it usable with
ethernet drivers which only connects to the PHY device
when the ethernet interface is opened.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36050
2013-03-15 16:06:28 +00:00
Gabor Juhos 5503686f69 generic: ar8216: add ar8xxx_start helper
Move switch starting code into a separate function.
This makes it usable from other places.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36049
2013-03-15 16:06:25 +00:00
Gabor Juhos 44ce8dac88 mpc85xx: add AR8327 initvals to the TL-WDR4900 devicetree
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36048
2013-03-15 15:53:06 +00:00
Gabor Juhos 7ba6a8d8e8 generic: ar8216: add OF configuration support for AR8327
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36047
2013-03-15 15:50:08 +00:00
Gabor Juhos ee12b1b7d5 generic: ar8216: separate platform_data based AR8327 code
Move platform_data specific configuration code
into a separate routine. Do it in preparation
for the upcoming OF support.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36046
2013-03-15 15:50:05 +00:00
Gabor Juhos d88f66ae21 generic: ar8216: don't use platform_data in ar8327_init_port
Fetch the PORT_STATUS values in ar8327_hw_init and
store those in a private data stucture for later use.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36045
2013-03-15 15:50:02 +00:00
Gabor Juhos 9d3f70d503 generic: ar8216: move the ar8327_get_port_init_status function
It will be used in ar8327_probe routine.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36044
2013-03-15 15:50:00 +00:00
Gabor Juhos 17d735fc46 generic: ar8216: simplify and rename ar8327_config_port
Return with the PORT_STATUS register value instead of
writing that directly into the corresponding register.
Also rename the function to ar8327_get_port_init_status.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36043
2013-03-15 15:49:57 +00:00
Gabor Juhos 3fee1bddbe generic: ar8216: remove superfluous pdata checks
The presence of the platform data is already verified in
ar8327_hw_init, and the driver does not start without that
anyway.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36042
2013-03-15 15:49:55 +00:00
Gabor Juhos 07532dca7f kernel: update linux 3.8 to 3.8.3
Also refresh the related generic/platform patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36039
2013-03-15 14:39:51 +00:00
Gabor Juhos d614f8a880 ar71xx: build images for the TL-MR11U v2
[juhosg: use different profile name for v1 and v2, and add
multi profile to build for both versions]

Signed-off-by: Guilhem Lettron <guilhem@lettron.fr>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36038
2013-03-15 14:35:52 +00:00
Gabor Juhos 35d41db979 ar71xx: rw2458n - Use eeprom (art) from wifi card
Use eeprom (art) from included wifi card, not hard coded in flash.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36037
2013-03-15 14:35:50 +00:00
Gabor Juhos 8deffcba7e ar71xx: Error fix in Kernel for MR3420v2 Ethernet Switch configuration
Error in using another MDIO (AP123 platform using only one GE1 device
for eth0 and eth1) for the router mr3420v2.
?onfirmed: https://forum.openwrt.org/viewtopic.php?pid=194779#p194779

Routers in this sense are the same and the only difference is: USB
port, USB led, instead of the GPIO-switch we have GPIO-button.

Signed-off-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36036
2013-03-15 14:35:48 +00:00
John Crispin 4d5860cdd6 ACMP252: fix USB-enable GPIO and use default PCI configuration for now
EEPROM is an actial serial EEPROM on the WiFi module, therefore we can remove
ralink_eep from the dts.
USB power-enable GPIO turned out to be GPIO #3 (found via probing/brute-force).
PCI works with default settings as long as the vendor bootloader is used.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 36030
2013-03-14 18:43:54 +00:00
John Crispin 0dbe4f502d fix buttons on vr9 eval kit
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36029
2013-03-14 18:43:49 +00:00
John Crispin 9b4a8c6d1e select vdsl packages on vr9 boards
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36028
2013-03-14 18:43:44 +00:00
John Crispin 0f7f1f3347 fix fritzbox 3370 partitions/memory/cmdline
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36027
2013-03-14 18:43:39 +00:00
John Crispin 5452dbad61 build jffs images for nand based fritzbox
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36026
2013-03-14 18:43:34 +00:00
John Crispin b98ae2b149 bump to v3.8
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36014
2013-03-14 18:42:29 +00:00
John Crispin 3ab75692f3 move GPHY FW blobs to non versioned folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36013
2013-03-14 18:42:21 +00:00
Florian Fainelli b2e63b8ea8 kernel: add support for 3.9-rc2
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36008
2013-03-14 14:45:56 +00:00
John Crispin 1360067c4a update the /init file to start /sbin/init
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36002
2013-03-13 18:11:13 +00:00
John Crispin 043d56b646 make sure the console works when using procd as our pid 1
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36000
2013-03-13 18:11:00 +00:00
Gabor Juhos f0f72ce262 gemini: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35995
2013-03-12 18:22:34 +00:00
Gabor Juhos 04f2ef9e66 gemini: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35994
2013-03-12 18:22:33 +00:00
Gabor Juhos 54b9b4d8a5 gemini: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35993
2013-03-12 18:22:22 +00:00
John Crispin 48a4b3a0cd fixes NO_XIP on CFI0001 flash
This patch disables the execute-in-place (XIP) support for flash on
lantiq. This has to be disabled since the bus which flash is connected
to does not support unaligned accesses. Resolves data bus errors on
Lantiq routers with Intel command set flash.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 35992
2013-03-12 13:53:08 +00:00
John Crispin e3a6ea65e1 add support for AudioCodes AC-252
user-space support for extracting the EEPROM for the RaLink WiFi is still
missing. Besides this, it's all working.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 35990
2013-03-12 13:52:54 +00:00
John Crispin 0b881eea72 unbreak dgn3500 spi-gpio
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35989
2013-03-12 13:52:47 +00:00
John Crispin b22cbac68f make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35988
2013-03-12 13:52:40 +00:00
John Crispin fad5f5700e make sure errors get sent to /dev/null
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 35987
2013-03-12 13:52:33 +00:00
Gabor Juhos 76934b6779 avr32: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35985
2013-03-12 13:28:33 +00:00
Gabor Juhos a71b9f5d04 avr32: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35984
2013-03-12 13:28:32 +00:00
Gabor Juhos 19b2c06b09 avr32: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35983
2013-03-12 13:28:31 +00:00
Gabor Juhos f04cccb842 avr32: add sysupgrade support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35982
2013-03-12 13:28:27 +00:00
Gabor Juhos 6c3dd84897 avr32: add firmware partition
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35981
2013-03-12 13:28:23 +00:00
Gabor Juhos cb9fad715c avr32: add diag support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35980
2013-03-12 13:28:21 +00:00
Gabor Juhos de0d19ac3d avr32: create network config dynamically
The default network configuration from base-files
is not correct for the NGW100 board.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35979
2013-03-12 13:28:19 +00:00
Gabor Juhos 73caeba522 avr32: built the firmware images from the lzma compressed uImage
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35978
2013-03-12 13:28:16 +00:00
Gabor Juhos 12a213227e mpc52xx: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35977
2013-03-12 07:18:37 +00:00
Gabor Juhos 1ed39da53d mpc52xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35976
2013-03-12 07:18:36 +00:00
Gabor Juhos ae0af74654 mpc52xx: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35975
2013-03-12 07:18:34 +00:00
Gabor Juhos fe3df4b593 ramips: add profile and build image for the Upvel UR-326N4G board
Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35972
2013-03-11 21:02:45 +00:00
Gabor Juhos d543f4b771 ramips: add user-space support for the Upvel UR-326N4G board
[juhosg: fix mac address setup]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35971
2013-03-11 21:02:43 +00:00
Gabor Juhos 3c2ef04a0e ramips: add kernel support for the Upvel UR-326N4G board
[juhosg: add missing symbols to config-3.{7,8}]

Patch from: Дмитрий Лебедев <lebedev@trendnet.ru>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35970
2013-03-11 21:02:40 +00:00
Gabor Juhos 14ca5fc98b ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35966
2013-03-11 19:52:54 +00:00
Gabor Juhos 72fc0c1906 ar71xx: add AR934X_GPIO_FUNC_* defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35965
2013-03-11 19:52:51 +00:00
Gabor Juhos 44cc1507e9 ar71xx: makefile changes to build image for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35964
2013-03-11 15:55:25 +00:00
Gabor Juhos 2998abab7c ar71xx: add user-space support for MR3420v2
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35962
2013-03-11 15:55:22 +00:00
Gabor Juhos 902dd27383 ar71xx: add kernel support for MR3420v2
[juhosg: use gpio_request_one to enable the USB power]

Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>

SVN-Revision: 35961
2013-03-11 15:55:20 +00:00
Gabor Juhos 5c5e1c0a9d ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.

Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35960
2013-03-11 15:55:19 +00:00
Gabor Juhos 257bfc21af ar71xx: add profile support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35959
2013-03-11 15:55:17 +00:00
Gabor Juhos 3fa3cbae7c ar71xx: add user space support for dir-835-a1
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35958
2013-03-11 15:55:15 +00:00
Gabor Juhos a7525f5f5d ar71xx: add kernel support for dir-835-a1
[juhosg:
  - remove custom mdio bus info and platform data for ar8327, clear the
    .led_cfg field from dir835a1_setup instead,
  - remove arguments of dir835c1_generic_setup function, register the
    LEDs directly from the board specific setup instead]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35957
2013-03-11 15:55:13 +00:00
Felix Fietkau bd6c9d6252 cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure
SVN-Revision: 35953
2013-03-11 02:29:53 +00:00
Felix Fietkau d7a529709a cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler
SVN-Revision: 35952
2013-03-11 02:29:47 +00:00
Felix Fietkau 0d13baff1e cns3xxx: increase number of ethernet driver rx buffers
SVN-Revision: 35951
2013-03-10 21:59:32 +00:00
Felix Fietkau ee2b511e1f cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries
SVN-Revision: 35950
2013-03-10 21:59:28 +00:00
Felix Fietkau d22ac8d8fb cns3xxx: minor ethernet driver cleanup
SVN-Revision: 35949
2013-03-10 21:59:21 +00:00
Hauke Mehrtens e1f24d99e1 brcm47xx: refresh config
SVN-Revision: 35948
2013-03-10 20:42:26 +00:00
Hauke Mehrtens 89d4fceee2 xburst: fix compilation: remove the __dev attributes
SVN-Revision: 35946
2013-03-10 20:26:28 +00:00
Hauke Mehrtens 45b24fa771 kernel: add some missing config options found by the buildbot.
SVN-Revision: 35945
2013-03-10 20:25:19 +00:00
Felix Fietkau 9facda9570 cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers
SVN-Revision: 35943
2013-03-10 18:25:20 +00:00
Felix Fietkau c44506fcbd cns3xxx: fix an rx irq handling corner case
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.

SVN-Revision: 35942
2013-03-10 18:25:16 +00:00
Felix Fietkau c1adc79328 cns3xxx: fix ethernet driver memory barrier usage
SVN-Revision: 35941
2013-03-10 18:25:11 +00:00
Gabor Juhos 9a71711d39 realview: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35940
2013-03-10 18:06:31 +00:00
Gabor Juhos 35dd42f976 realview: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35939
2013-03-10 18:06:29 +00:00
Felix Fietkau 53e0f10246 kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm
SVN-Revision: 35938
2013-03-10 17:04:36 +00:00
Felix Fietkau 2b83c9bd8a kernel: ensure that the arm exception handlers get preserved
SVN-Revision: 35937
2013-03-10 17:04:31 +00:00
Felix Fietkau f0d7ba33ef kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors
SVN-Revision: 35936
2013-03-10 14:51:42 +00:00
Gabor Juhos 5b3ab0e21e xburst: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35934
2013-03-10 13:24:54 +00:00
Gabor Juhos 00caedf86e xburst: switch to 3.8
Compile tested only, so add broken flag.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35933
2013-03-10 13:24:52 +00:00
Gabor Juhos 8942d4dc04 xburst: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35932
2013-03-10 13:24:50 +00:00
Gabor Juhos 15718f5387 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35931
2013-03-10 13:24:47 +00:00
Gabor Juhos f25c050aa9 adm5120: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35930
2013-03-10 13:24:46 +00:00
Gabor Juhos 5502bbe2ca adm5120: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35929
2013-03-10 13:24:45 +00:00
Gabor Juhos c42da71d8b malta: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35928
2013-03-10 13:24:44 +00:00
Gabor Juhos 6720fc6952 malta: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35927
2013-03-10 13:24:43 +00:00
Gabor Juhos 82dc64b19b atheros: remove 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35926
2013-03-10 13:24:42 +00:00
Gabor Juhos 5b8e106ae6 atheros: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35925
2013-03-10 13:24:40 +00:00
Gabor Juhos ce5806378e mpc83xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35924
2013-03-10 13:24:39 +00:00
Gabor Juhos c79c132229 mpc83xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35923
2013-03-10 13:24:38 +00:00
Gabor Juhos 27ba973c06 rb532: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35922
2013-03-10 13:21:40 +00:00
Gabor Juhos 501e4d331d rb532: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35921
2013-03-10 13:21:33 +00:00
Gabor Juhos 8223205a29 rb532: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35920
2013-03-10 13:21:29 +00:00
Gabor Juhos e8a5312bef ar71xx: correct board name to make LEDs work on RB750
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35919
2013-03-10 07:20:57 +00:00
Gabor Juhos d85ffaabe9 ppc40x: remove __dev_{in,ex}it annotations
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35918
2013-03-10 07:20:54 +00:00
Felix Fietkau 446409f43e cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance
SVN-Revision: 35917
2013-03-10 01:27:04 +00:00
Felix Fietkau 95431b7843 cns3xxx: remove linux 3.3 support
SVN-Revision: 35916
2013-03-10 01:01:55 +00:00
Felix Fietkau 3d919b7c08 cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance)
SVN-Revision: 35915
2013-03-10 01:01:51 +00:00
Hauke Mehrtens 44ed7d664a brcm47xx: add some more partition parser fixes by Rafał Miłecki
SVN-Revision: 35912
2013-03-09 19:48:03 +00:00
Hauke Mehrtens 694050a4cf brcm47xx: netconfig: add bacis support for swconfig
Parse the cpu port from swconfig and explicitly mark the cpu port as tagged.

SVN-Revision: 35911
2013-03-09 19:24:43 +00:00
Felix Fietkau 72af5b4b35 kernel: add a missing config symbol for 3.8
SVN-Revision: 35910
2013-03-09 19:04:37 +00:00
Felix Fietkau 95f14d052a cns3xxx: add linux 3.8 support and use it by default
SVN-Revision: 35908
2013-03-09 18:51:46 +00:00
Felix Fietkau 85348d602e kernel: fix mpcore watchdog symbol export
SVN-Revision: 35907
2013-03-09 18:51:39 +00:00
Gabor Juhos 938361b055 cns21xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35886
2013-03-04 16:08:41 +00:00
Gabor Juhos a61431b154 cns21xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35885
2013-03-04 16:08:39 +00:00
Gabor Juhos 3e3fc552bc ppc44x: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35884
2013-03-04 15:16:37 +00:00
Gabor Juhos d24041665c ppc44x: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35883
2013-03-04 15:16:35 +00:00
Gabor Juhos c67127ad23 ppc40x: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35882
2013-03-04 15:16:33 +00:00
Gabor Juhos 341b5ba939 ppc40x: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35881
2013-03-04 15:16:32 +00:00
Florian Fainelli b412a81524 brcm63xx: fix LED names for various boards
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35880
2013-03-04 13:42:35 +00:00
Gabor Juhos 947bc9d36f ar71xx: add backported watchdog patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35879
2013-03-04 12:08:28 +00:00
Gabor Juhos 1d55249d7c ar71xx: use backported QCA955x patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35878
2013-03-04 11:48:15 +00:00
Gabor Juhos 64a9fe2894 ar71xx: use backported PCI patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35877
2013-03-04 11:48:08 +00:00
Gabor Juhos 12d49b5195 ar71xx: use backported MISC IRQ patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35876
2013-03-04 11:48:06 +00:00
Gabor Juhos 4c31b9f43e ar71xx: use backported GPIO patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35875
2013-03-04 11:48:04 +00:00
Luka Perkov 120028af99 ar71xx: enable building ramdisk images for WZRHPG30XNH board types
Signed-off-by: Luka Perkov <luka@openwrt.org>
Acked-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35874
2013-03-04 11:37:28 +00:00
Gabor Juhos 0ad50b0bec ar71xx: use backported SPI patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35873
2013-03-04 09:40:44 +00:00
Gabor Juhos c28cdfab31 mpc85xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35872
2013-03-04 09:37:25 +00:00
Gabor Juhos 84e960f7aa mpc85xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35871
2013-03-04 09:37:24 +00:00
Gabor Juhos 3ee484d54c ar71xx: remove 3.7 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35870
2013-03-04 09:03:50 +00:00
Gabor Juhos d5adb0dbdd ar71xx: switch to 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35869
2013-03-04 08:47:38 +00:00
Gabor Juhos a87a96da67 kernel: update linux 3.8 to 3.8.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35868
2013-03-04 08:43:55 +00:00
Luka Perkov a5ebfc79ba ar71xx: rework changes from r35840
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35865
2013-03-03 21:59:34 +00:00
Gabor Juhos 26fbc15a86 kernel: update linux 3.8 to 3.8.1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35862
2013-03-03 13:58:52 +00:00
Gabor Juhos da79a4c698 linux/3.8: add missing config symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35861
2013-03-03 13:58:10 +00:00