eb90f30ce7
package/kernel: move kmod-fs-mbcache into fs-ext4
...
mbcache is only needed if xattr support is enabled, but this is only true
for ext4 on 2.6.37+, so just bundle it with ext4 when needed.
SVN-Revision: 27849
2011-07-31 17:58:46 +00:00
8fc2981bcd
dropbear: - split port argument at the rightmost colon, allows binding to specific IPv6 addresses - don't use uci ipaddr var but resolve ifname and get addresses from it ( #9853 )
...
SVN-Revision: 27843
2011-07-31 12:05:54 +00:00
19eaf1c5f7
kernel: add a new version of my netfilter speedup patches for linux 2.6.39 and 3.0
...
SVN-Revision: 27840
2011-07-30 15:39:52 +00:00
26fed98ce6
qos-scripts: disable by default
...
SVN-Revision: 27832
2011-07-29 16:32:55 +00:00
35463493e8
hostapd: fix a compile issue when compiling wpa_supplicant ( fixes #9837 )
...
SVN-Revision: 27830
2011-07-29 14:14:32 +00:00
a5edb705b4
ath9k: fix switching channel bandwidth from 5/10 back to 20mhz
...
SVN-Revision: 27827
2011-07-29 12:25:46 +00:00
e4b6839fd3
upgrade to 3.0 (magicbox ata and openrb usb is broken, but the current kernel didn't compile at all, so...)
...
SVN-Revision: 27826
2011-07-29 10:16:48 +00:00
32868c1a00
hostapd: fix wds interface address handling for multi-bssid
...
SVN-Revision: 27823
2011-07-29 09:40:24 +00:00
3712ca3f9b
hostapd: use a timeout of 1000ms instead of 100ms for the first gtk rekey eapol frame
...
SVN-Revision: 27822
2011-07-29 09:40:19 +00:00
2e339a6466
swconfig: fix backward compatibility
...
swconfig fails to load uci configuration after the generic switch
identifier changes.
root@OpenWrt:/# uci show network | grep switch
network.@switch[0]=switch
network.@switch[0].name=eth0
network.@switch[0].reset=1
network.@switch[0].enable_vlan=1
network.@switch_vlan[0]=switch_vlan
network.@switch_vlan[0].device=eth0
network.@switch_vlan[0].vlan=1
network.@switch_vlan[0].ports=0t 2 3 4 5
network.@switch_vlan[1]=switch_vlan
network.@switch_vlan[1].device=eth0
network.@switch_vlan[1].vlan=2
network.@switch_vlan[1].ports=0t 1
root@OpenWrt:/# swconfig dev eth0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
root@OpenWrt:/# swconfig dev switch0 load /etc/config/network
Failed to apply configuration for switch 'switch0'
SVN-Revision: 27820
2011-07-28 19:54:11 +00:00
4dd9373b3e
ppp: remove zero-length patches
...
SVN-Revision: 27819
2011-07-28 17:34:44 +00:00
4c4da37c09
ppp: version bump to 2.4.5
...
Bump to the current version of PPP.
A few of the patches are either in 2.4.5 or something functionally equivalent is, so those patches were removed.
1 patch was added to accommodate pppol2pv3_addr which is referenced in a linux kernel header file, but isn't defined in the kernel header files packaged with PPP.
Redux: re-instate the commenting out of the exponential back-off as requested by Felix.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27818
2011-07-28 16:51:12 +00:00
e18ceb1dac
ar71xx: merge WZR-HP-G301NH support into WZR-HP-G300NH
...
Now that we can use a generic name for the switch there is no need for a
separate image for the WZR-HP-G301NH.
Update the default network config and remove the extra image.
SVN-Revision: 27814
2011-07-28 11:57:51 +00:00
ea211c4d90
ramips: rt305x: add support for the Netcore NW718 board
...
SVN-Revision: 27813
2011-07-28 10:56:32 +00:00
437e184484
ramips: rt305x: add support for the Asus RT-G32 B1 board
...
Based on a patch by: Sergiy <piratfm@gmail.com>
SVN-Revision: 27812
2011-07-28 10:56:30 +00:00
7193f29d96
ramips: rt305x: enable M25P80 driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27811
2011-07-28 10:56:28 +00:00
c6db514de8
ramips: rt305x: introduce rt305x_register_spi helper
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27810
2011-07-28 10:56:27 +00:00
57122e7ccc
ramips: add SPI controller driver
...
Based on a patch by Sergiy <piratfm@gmail.com>
SVN-Revision: 27809
2011-07-28 10:56:25 +00:00
3f986df05f
ramips: rt305x: add support for the DIR-600 B1,B2 boards
...
SVN-Revision: 27808
2011-07-28 10:56:24 +00:00
857c1028ac
ramips: rt305x: change machine id for DIR-300
...
SVN-Revision: 27807
2011-07-28 10:56:22 +00:00
42d3a55347
ramips: rt305x: rename LEDs on the DIR-300-B1
...
SVN-Revision: 27806
2011-07-28 10:56:21 +00:00
39689b648f
ramips: rt305x: sort Kconfig/Makefile entries
...
SVN-Revision: 27805
2011-07-28 10:56:19 +00:00
32c0534516
ramips: rt305x: fix uci-defaults/network script for the RT3350 based boards
...
This change corrects expected CPU name of Ralink RT3050, which
describes itself as RT3350 (this name is ripped off chip and elevated
to user space via /proc/cpuinfo.)
This patch fixes wired network on DIR-300 rev B and DIR-600 rev B
Signed-off-by: Slawomir Cygan <wiewior@wiewior.eu.org>
SVN-Revision: 27804
2011-07-28 10:56:18 +00:00
57663ce25b
ramips: fix PWH2004 image generation
...
SVN-Revision: 27803
2011-07-28 10:56:15 +00:00
eaa935658b
swconfig: Add generic switch identifiers
...
Also make switches available under a generic name "switch<num>" for device
name agnostic access. The old device name is used as an alias for backward
compatibility.
SVN-Revision: 27800
2011-07-27 18:00:18 +00:00
8ff7756e82
base-files: warn when calling /etc/init.d/<script> enable and neither START nor STOP is defined
...
SVN-Revision: 27797
2011-07-27 09:02:10 +00:00
7a206885df
firewall: prevent redundant rules if multiple ports and multiple icmp types are given in a rule block for both icmp and other protocols
...
SVN-Revision: 27792
2011-07-26 22:21:39 +00:00
d6431df9c1
ath9k: rework tx power handling - display the correct *current* tx power, and also fix tx power limits with ATH_USER_REGD set
...
SVN-Revision: 27788
2011-07-26 20:53:40 +00:00
4da138d899
x86/alix2: include WAN interface by default
...
Include WAN interface by default, instead of putting both ports in the LAN bridge.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27787
2011-07-26 16:37:48 +00:00
41db64f8e0
x86/alix2: fix typo in target makefile
...
Cut and paste cruft from borrowing from Geos platform.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
SVN-Revision: 27786
2011-07-26 16:37:44 +00:00
d0cea742bb
mac80211: merge a few pending fixes for channel switch handling
...
SVN-Revision: 27783
2011-07-26 15:11:27 +00:00
20d62f8e5f
linux-atm: don't fail if an PREFIX env var is set
...
SVN-Revision: 27779
2011-07-26 10:47:59 +00:00
94c728dc39
base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
...
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
80956276a7
x86: add missing config symbols
...
This adds some config symbols for kernel 3.0.
Thank you realopty for the patch.
This is from #9719 .
SVN-Revision: 27775
2011-07-25 21:21:01 +00:00
4e6c93bef1
bcm63xx: Fix SPI commands and register offsets for BCM6348
...
In 240-spi.patch, spi registers for bcm6348 were all messed up. This patch fixes that.
It also fixes some spi commands for all bcm63xx.
Signed-off-by: Anthony Blakemore <stokie-ant@raverbaby.co.uk>
SVN-Revision: 27774
2011-07-25 19:52:47 +00:00
b857433bcb
uClibc: backport an x86 compile fix from mainline (thx, swalker)
...
SVN-Revision: 27773
2011-07-25 18:26:02 +00:00
816f76457c
uClibc: update to latest 0.9.32.1 git
...
SVN-Revision: 27772
2011-07-25 13:38:58 +00:00
5820306407
only export GCC_HONOUR_COPTS for the built-in toolchain, fixes missing-fhonour-copts warnings with external toolchains
...
SVN-Revision: 27771
2011-07-25 10:32:38 +00:00
1266eb49ee
mac80211: rename a misnamed patch
...
SVN-Revision: 27769
2011-07-25 09:56:23 +00:00
b87d25ea75
mac80211: remove the ccmp rx pn workaround, it should no longer be necessary and it was reported to cause connection stability issues (see #9646 )
...
SVN-Revision: 27764
2011-07-25 06:29:00 +00:00
f0f10fa599
add missing symbols for generic and x86 on 3.0, based on Philip Prindeville's patch
...
SVN-Revision: 27762
2011-07-24 22:04:08 +00:00
b197196bc8
kernel.mk: Fix kernel module path for 3.0
...
Linux 3.0 calls itself 3.0.0, so insmod expects the modules in
/lib/modules/3.0.0.
SVN-Revision: 27761
2011-07-24 21:42:33 +00:00
f66871e836
From: George Kashperko <george@znau.edu.ua> Issue map read after Write Buffer Load command to ensure chip is ready to receive data. Signed-off-by: George Kashperko <george@znau.edu.ua>
...
SVN-Revision: 27760
2011-07-24 15:37:00 +00:00
6eb9e39bc4
refresh 501-yaffs_cvs_2009_04_24.patch for Linux 3.0 final
...
SVN-Revision: 27759
2011-07-24 15:36:33 +00:00
4815eaa4c3
brcm47xx: run ssb_pcicore_fix_sprom_core_index just for ssb bus on pci
...
ssb_pcicore_fix_sprom_core_index accesses the sprom on the pci bus but
this causes a data bus error (oops) on a SoC.
SVN-Revision: 27758
2011-07-24 15:18:29 +00:00
866a22dc67
kernel: crypto: fix spelling
...
SVN-Revision: 27757
2011-07-24 15:08:17 +00:00
9e4113b493
ar71xx: autodetect rtl8366s/rtl8366rb on wzr-hp-g300nh
...
SVN-Revision: 27756
2011-07-24 14:40:35 +00:00
5b32d62fcf
rtl8366_smi: implement a function for detecting whether the attached switch is RTL8366S or RTL8366RB
...
SVN-Revision: 27755
2011-07-24 14:40:31 +00:00
1afe8a0726
rtl8366: unify rtl8366s and rtl8366rb platform data
...
SVN-Revision: 27754
2011-07-24 14:40:23 +00:00
00dd85d8f6
ocf-linux: version bump to 20110720
...
Fixes problem with TFM allocation in cryptosoft.c
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Hauke:
* remove ubsec_ssb package and take it from ocf-linux
* use patches from ocf-linux package
* refresh all patches
* readd some build fixes for OpenWrt.
* readd CRYPTO_MANAGER dependency
SVN-Revision: 27753
2011-07-24 14:17:58 +00:00
Jonas Gorski
Jo-Philipp Wich
Felix Fietkau
Imre Kaloz
Gabor Juhos
Hauke Mehrtens