cfdfc8c05b
mac80211: Add mac address filter configuration for hostapd
...
Add support of mac address filter. Now 'macfilter' and 'maclist' options
can be used with mac80211.
Patch from: kentarou matsuyama <matsuyama@thinktube.com>
SVN-Revision: 25105
2011-01-26 11:33:54 +00:00
253f4d82f2
mac80211: support per-vif wmm option, defaults to 1 if unset
...
SVN-Revision: 24966
2011-01-11 13:19:53 +00:00
7526fd8627
mac80211: rename max_clients option to maxassoc, this brings it in line with broadcom
...
SVN-Revision: 24726
2010-12-19 13:33:55 +00:00
3347f8e360
hostapd: add support for specifying the maximum number of clients
...
Signed-off-by: Alexander Couzens <lynxis@c-base.org>
SVN-Revision: 24725
2010-12-19 11:56:56 +00:00
4dcba42342
mac80211: use iw for txpower control ( #8416 )
...
SVN-Revision: 24441
2010-12-10 18:43:47 +00:00
3e7589ce1a
mac80211: set GF flag in hostapd config if supported
...
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 23673
2010-10-27 15:04:29 +00:00
c173d41012
mac80211: add uci support for the ad-hoc multicast rate setting
...
SVN-Revision: 23637
2010-10-25 23:51:12 +00:00
35cdc5d722
hostapd/mac80211: implement support for AP+STA
...
SVN-Revision: 23602
2010-10-23 23:39:54 +00:00
b7204be37b
wifi: change the default channel from 5 to 11, 5 was a really bad choice
...
SVN-Revision: 23423
2010-10-13 12:22:48 +00:00
8344c770fc
mac80211: fix handling of frag and rts options, thanks stintel!
...
SVN-Revision: 22355
2010-07-22 16:01:17 +00:00
e0751eb57e
mac80211: fix interface teardown for kernels >= 2.6.33
...
SVN-Revision: 22078
2010-07-06 18:53:48 +00:00
99757d3336
mac80211: use the nl80211 driver for wpa_supplicant
...
SVN-Revision: 21321
2010-05-02 22:03:54 +00:00
ef710f7cf3
mac80211: enable rx/tx stbc by default if supported
...
SVN-Revision: 21319
2010-05-02 22:03:44 +00:00
8b9afa6f75
mac80211: fix interface setup for wds client sometimes an interface does not get added to the bridge properly this seems to be a race of interface setup vs wpa_supplicant fix this by configuring the interface only after wpa_supplicant has been started
...
SVN-Revision: 20106
2010-03-09 21:23:14 +00:00
ddb6eb9d51
mac80211: add support for the noscan option for skipping the initial scan on hostapd startup
...
SVN-Revision: 20089
2010-03-09 17:36:04 +00:00
ee2c54569f
mac80211: fix essid setting for ad-hoc (thx, stintel)
...
SVN-Revision: 19916
2010-02-28 19:05:32 +00:00
13cfa88855
mac80211: fix client mode
...
SVN-Revision: 19915
2010-02-28 19:02:05 +00:00
1c8fbfbaa6
mac80211: fix interface startup order for AP+STA (patch by yann lopez)
...
SVN-Revision: 19912
2010-02-28 17:06:53 +00:00
d692a2340c
mac80211: always use wpa_supplicant for client connections (patch by Stijn Tintel)
...
Since client mode in mac80211is unreliable without using wpa_supplicant,
it would be better to enable wpa_supplicant by default.
With this patch, wpa_supplicant will always be used for mac80211-based
drivers in client mode. This will break client mode for images that
don't include wpa_supplicant or wpad, so maybe I need to add a check
somewhere to see if wpa_supplicant is available, and show the user a
warning if he tries client mode without wpa_supplicant. Suggestions on
where to add this check are welcome.
Tested with ath5k in client mode on open and wpa2-psk network, and
tested on my ath9k based AP as well to make sure it doesn't break AP mode.
SVN-Revision: 19718
2010-02-19 01:07:21 +00:00
e1efddf19b
mac80211: use wpa_supplicant for unencrypted connections to improve client mode reliability (patch by Stijn Tintel from #6653 )
...
SVN-Revision: 19550
2010-02-08 13:42:14 +00:00
52c2e565dd
mac80211: fix setup with more than 2 ap mode interfaces
...
SVN-Revision: 19494
2010-02-02 02:19:01 +00:00
8d689fedac
mac80211: restrict the killing of wpa_supplicant processes to the right interface ( #5991 )
...
SVN-Revision: 19334
2010-01-25 22:11:21 +00:00
789ec837e9
mac80211: make b43-fwsquash.py work with python 3.x
...
SVN-Revision: 19307
2010-01-24 02:26:57 +00:00
26c953db20
mac80211: improve wifi interface cleanup
...
SVN-Revision: 19285
2010-01-23 08:28:20 +00:00
946291c8d5
mac80211: fix spurious error return codes in enable_mac80211()
...
SVN-Revision: 19265
2010-01-22 00:58:52 +00:00
eb1190bb29
mac80211: fix hostapd wmm setting for multiple bss interfaces
...
SVN-Revision: 19264
2010-01-22 00:55:10 +00:00
ba7bfddaae
mac80211: restructure /lib/wifi/mac80211.sh use the new multi-bss single instance hostapd mode move mac80211 specific bits out of /lib/wifi/hostapd.sh add a new option 'htmode' for switching between HT20 and HT40+,HT40-
...
SVN-Revision: 19235
2010-01-20 02:26:05 +00:00
8bdee4acf7
mac80211: fix mac address handling for multiple phy/vif
...
SVN-Revision: 19177
2010-01-17 01:52:45 +00:00
b8ef670202
mac80211: fix ht capability detection (thx, stintel)
...
SVN-Revision: 19144
2010-01-15 02:55:29 +00:00
b35e22bd24
mac80211: implement the distance setting
...
SVN-Revision: 19142
2010-01-15 01:16:52 +00:00
cb30b52ec1
base-files, mac80211 ( #6491 ) - fix wep key handling in iw with mac80211 based drivers - sanitize keys where necessary - put a procedure prepare_key_wep() into /sbin/wifi for use by other driver backends
...
SVN-Revision: 19118
2010-01-13 18:39:44 +00:00
bced3bd81b
b43-fwsquash: ucode2.fw also supports core rev 3
...
SVN-Revision: 18948
2009-12-26 23:20:24 +00:00
abade416d1
b43 and b43legacy: squash firmware
...
Only G and L-PHY are supportted by b43 driver
Add squash firmware for b43legacy
SVN-Revision: 18947
2009-12-26 23:15:16 +00:00
f1e9fb687b
b43: Add L-PHY firemware files to squash script
...
Use firmware 4.178.10.4 as default on.
Select firmware for all supported phy types and version as default.
Close ticket #5978
SVN-Revision: 18935
2009-12-26 01:06:36 +00:00
0a24ec2e4a
mac80211: fix handling of vif mac addresses in /lib/wifi/mac80211.sh (patch from #6401 )
...
SVN-Revision: 18923
2009-12-24 11:05:04 +00:00
ddba20a829
mac80211: Don't echo missing physical device errors to wireless config file
...
SVN-Revision: 18896
2009-12-22 21:45:08 +00:00
d431d864b8
mac80211: fix RTS threshold not being set for mac80211 devices
...
A typo prevented it from working, tested with ar71xx and ath9k.
Signed-off-by: Otto Solares <solca@guug.org>
SVN-Revision: 18719
2009-12-09 17:22:25 +00:00
fee32f227e
mac80211: set the country code through iw reg, setting it only through hostapd apparently does not work
...
SVN-Revision: 18665
2009-12-05 17:12:51 +00:00
af947d5c89
mac80211: fix a shell syntax error
...
SVN-Revision: 18664
2009-12-05 15:11:47 +00:00
6da667f886
mac80211: fix wpa handling in sta mode
...
SVN-Revision: 18662
2009-12-05 15:08:25 +00:00
86bfe0a701
mac80211: rename autogenerated wifi-device sections from wifi* to radio* to prevent conflicts with madwifi interface naming
...
SVN-Revision: 18627
2009-12-03 18:35:31 +00:00
7d599ee46c
mac80211: fix up wds sta mode after r18591
...
SVN-Revision: 18600
2009-11-29 13:56:41 +00:00
756b6fdbf3
mac80211: fix detection of multiple mac80211 devices
...
SVN-Revision: 18583
2009-11-28 18:00:59 +00:00
ff7c793af5
mac80211: remove trailing whitespaces in mac80211.sh
...
SVN-Revision: 18582
2009-11-28 18:00:53 +00:00
1104a67439
mac80211: fix default channel selection in mac80211.sh (thanks to blubberdiblub)
...
SVN-Revision: 18577
2009-11-28 13:49:14 +00:00
7ce91a64f0
mac80211: fix a typo in the mac80211.sh
...
SVN-Revision: 18567
2009-11-27 21:21:28 +00:00
05c8eef651
mac80211: select channel 36 by default on 5GHz only devices
...
SVN-Revision: 18562
2009-11-27 21:21:10 +00:00
a195852e7f
mac80211: disable powersave on the sta by default (for performance reasons)
...
SVN-Revision: 18379
2009-11-11 16:59:36 +00:00
1dbcfdaf2f
mac80211: implement wds sta support (wds ap support work in progress, needs hostapd changes)
...
SVN-Revision: 18356
2009-11-10 19:27:19 +00:00
559f32adbc
mac80211: fix wpa in client mode
...
SVN-Revision: 18355
2009-11-10 19:27:13 +00:00
Felix Fietkau
Jo-Philipp Wich
Michael Büsch
Hauke Mehrtens
Vasilis Tsiligiannis
Gabor Juhos