hak5
/
openwrt
mirror of https://github.com/hak5/openwrt.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
17,931 Commits
5 Branches
29 Tags
202 MiB
Commit Graph

435 Commits (4dd4cbeb43687199f514ce9ad11f337cdbfe0421)

Author SHA1 Message Date
Daniel Dickinson 0e839ea40d Revert "[brcm63xx] patches-2.6.35: Added flash chip definition for Macronix MX29LV640T." 
This reverts commit 43511418ae2771a6662a83a254f06e37f4ac19e5.

It belongs in generic not brcm63xx.

SVN-Revision: 24308
 2010-12-07 17:02:31 +00:00
Daniel Dickinson 183d628485 patches-2.6.35: Added flash chip definition for Macronix MX29LV640T. Thanks blunoise 
SVN-Revision: 24307
 2010-12-07 16:42:23 +00:00
Daniel Dickinson 8f9b14dafe boards: Added GW6x00 fixups and GPIOs. The GW6200 GPIOs are different than the reference design 96348GW so we use fixup to allow us to define the correct ones, also the GW6000 has no GPIO-controlled leds. 
SVN-Revision: 24305
 2010-12-07 15:15:54 +00:00
Daniel Dickinson 3baa168e09 patches: Refreshed patches after led_count 
SVN-Revision: 24304
 2010-12-07 15:15:51 +00:00
Daniel Dickinson b963cbde33 board definitions: Added patch for calculating led count, which was part of the patch removed in the previous commit 
SVN-Revision: 24303
 2010-12-07 15:15:47 +00:00
Daniel Dickinson e5ca4d81f4 Remove patch 140-new_bcm96348gw_leds because it is really the GW6200 leds, not the generic 96348GW. Another commit will add the GW6200 specific boardid and leds. This removal reverts the 96348GW leds to the reference design GPIOs. 
SVN-Revision: 24302
 2010-12-07 15:15:41 +00:00
Daniel Dickinson ad24e14b35 base-files: Added the preinit information for reset button and preinit indication led, and preinit interface 
SVN-Revision: 24276
 2010-12-06 06:46:03 +00:00
Daniel Dickinson 244db5ac6a board definition: Fixed CPVA642 LED definitions 
SVN-Revision: 24275
 2010-12-06 06:45:57 +00:00
Daniel Dickinson 8316194016 board definitions: Added CPVA642 GPIO leds and buttons and refreshed patches later in series due to fuzz 
SVN-Revision: 24274
 2010-12-06 04:31:23 +00:00
Daniel Dickinson 7129521696 base-files: Added network defconfig because board only has one ethernet (4-port switch) 
SVN-Revision: 24273
 2010-12-06 02:01:08 +00:00
Daniel Dickinson 9677b65cb6 image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. 
SVN-Revision: 24191
 2010-11-28 22:13:00 +00:00
Daniel Dickinson 314bce63e6 bcm63xx: Add support for the T-Com Speedport W 500V. 
Add support for the T-Com Speedport W 500V using a special tagged image as it
identifies itself as a 96348GW, but has some gpios wired differently, and also
has only one ethernet port without a switch attached to it.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24190
 2010-11-28 22:04:44 +00:00
Daniel Dickinson 3a49f669f2 bcm63xx: Add board id override fixup. 
Add a fixup for the kernel to check the bcm tag of the image for a boardid in
the information1 field, and use that instead of the supplied one by cfe. This
is triggered by a + at the start of the information1 field.

Also modify the image generation to generate apropriately tagged images.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24189
 2010-11-28 22:04:40 +00:00
Daniel Dickinson c51d772e62 bcm63xx: Finalize support for DSL-274xB, rev C2. 
The DSL-2740B/DSL-2741B rev C2 support was missing the board definition,
resulting in a kernel panic on boot.
This patch adds it, and also renames the generated image name to properly
reflect that it is for the revision C2, and for both the DSL-2740B and
DSL-2741B.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24188
 2010-11-28 22:04:36 +00:00
Daniel Dickinson 8fa9b24a4c bcm63xx: Allow 'colored' power leds. 
Since some devices have more than one power led, they might be separated by
their color in the name. To also allow them to be on after leaving preinit,
set any status led starting with 'power' to on instead of only those with
the exact name of 'power'.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24187
 2010-11-28 22:04:30 +00:00
Daniel Dickinson fec30c8c80 bcm63xx: Don't hardcode the switch ethernet interface in preinit. 
Currently eth1 is hardcoded as the expected interface switches in diagmode.
This patch replaces the eth1 with the ifname, and also directly tests if
the interface specified by ifname has a switch attached.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24186
 2010-11-28 22:04:26 +00:00
Daniel Dickinson b1b318750a bcm63xx: Add defconfigs. 
Port the mechanism for different default configurations from ar71xx and
use the old configuration as the default configuration. This should have
no functional differences to before.
While we are at it, remove the obsolete nat option.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 24185
 2010-11-28 22:04:19 +00:00
Imre Kaloz ead8ab8403 update to the latest stable kernels 
SVN-Revision: 24136
 2010-11-24 18:50:11 +00:00
Daniel Dickinson 195d1d7446 image Makefile: Removed extraneous tab from Image/LimitName16 macro definition. The solves the strange whitespace in front of the image name in the info1 section 
SVN-Revision: 24127
 2010-11-24 11:06:13 +00:00
Daniel Dickinson 0c0c1f017f image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. 
SVN-Revision: 24118
 2010-11-23 20:17:08 +00:00
Daniel Dickinson 049e59a27b Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). 
SVN-Revision: 24040
 2010-11-19 13:41:54 +00:00
Daniel Dickinson eadb5c84fa imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). 
SVN-Revision: 24011
 2010-11-16 06:46:53 +00:00
Claudio Mignanti 7583fe8668 Add wps button on alice gate 
SVN-Revision: 23903
 2010-11-06 21:08:44 +00:00
Imre Kaloz 0a5da348d1 update kernels to 2.6.32.25 and 2.6.35.8 
SVN-Revision: 23851
 2010-11-04 09:01:08 +00:00
Florian Fainelli ffc84cf75c register uart driver on livebox (#8013) 
SVN-Revision: 23653
 2010-10-27 10:02:13 +00:00
Florian Fainelli 7bf5647070 refresh 2.6.35 patches 
SVN-Revision: 23652
 2010-10-27 10:02:08 +00:00
Claudio Mignanti 697d3e7066 Fix nxp_74hc164 driver compile error (builbot) 
SVN-Revision: 23623
 2010-10-24 16:10:41 +00:00
Florian Fainelli 20d28f7685 fix platform_devices registration 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com>

SVN-Revision: 23517
 2010-10-18 19:49:54 +00:00
Florian Fainelli af0e5167bc add bcm96338W2 e7t board (D-Link 2640U/BRU/C, #7558) 
SVN-Revision: 23508
 2010-10-17 17:45:50 +00:00
Florian Fainelli 9d9e3fed62 remove 2.6.32 support 
SVN-Revision: 23505
 2010-10-17 16:32:35 +00:00
Florian Fainelli a1ea84dbb6 fix SPI driver, move register out of driver code 
Signed-off-by: Tanguy Bouzéloc <tanguy.bouzeloc@efixo.com

SVN-Revision: 23504
 2010-10-17 14:09:30 +00:00
Florian Fainelli 1a13c39f76 restore kernel oldconfig 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23503
 2010-10-17 14:09:24 +00:00
Florian Fainelli 265bf2ccb0 refresh patches 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23502
 2010-10-17 14:09:04 +00:00
Florian Fainelli 9f4c51acb7 refresh nb4 support. Register 74x164 device 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23501
 2010-10-17 14:08:57 +00:00
Florian Fainelli 8cbd9d5a2e add spi devices board info int bcm63xx_boards 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23500
 2010-10-17 14:08:51 +00:00
Florian Fainelli b65e494976 add 74x164 SPI chip support 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23499
 2010-10-17 14:08:45 +00:00
Florian Fainelli cd9b90235c backport SPI master with no RXTX support (from 2.6.36) 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23498
 2010-10-17 14:08:39 +00:00
Florian Fainelli d5854cfd4d register earlier extended platform devices 
Signed-off-by: Miguel Gaio <miguel.gaio@efixo.com>

SVN-Revision: 23497
 2010-10-17 14:08:34 +00:00
Lars-Peter Clausen 83d6a36019 update 2.6.35.x to 2.6.35.7 
SVN-Revision: 23213
 2010-10-04 07:42:32 +00:00
Florian Fainelli bbca651e1b remove wpa-supplicant and iw from the Tecom GW6x00 profile 
SVN-Revision: 23051
 2010-09-13 08:30:35 +00:00
Florian Fainelli d3e206ad96 default to using 2.6.35 
SVN-Revision: 23038
 2010-09-12 21:23:53 +00:00
Florian Fainelli dc1302fdf9 remove 2.6.33 support 
SVN-Revision: 23037
 2010-09-12 21:23:47 +00:00
Florian Fainelli 327ac42dca change the Tecom GW6x00 profile to use wl instead of b43 
SVN-Revision: 23036
 2010-09-12 21:23:41 +00:00
Florian Fainelli f4f789f211 register udc and spi devices at the correct init level 
SVN-Revision: 23035
 2010-09-12 21:23:35 +00:00
Florian Fainelli fab2e77357 refresh 2.6.35 patches 
SVN-Revision: 23034
 2010-09-12 21:23:29 +00:00
Jo-Philipp Wich 867ac59ff9 enable SYSRQ for all targets, remove overrides from brcm63xx, octeon and omap35xx 
SVN-Revision: 22846
 2010-08-30 22:59:20 +00:00
Florian Fainelli 2e343d9760 add 2.6.35 support 
SVN-Revision: 22800
 2010-08-25 19:56:08 +00:00
Florian Fainelli b1becffa5b update to 2.6.32.20 
SVN-Revision: 22766
 2010-08-22 17:07:37 +00:00
Daniel Dickinson a5fdf57a1b base-files: diag.sh: For power button as preinit status led, end with led left on, not off 
SVN-Revision: 22466
 2010-08-02 19:33:08 +00:00
Daniel Dickinson d391ca2c8c base-files: brcm63xx.sh: Added comtrend (96348GW-11) to routers with buttons and leds on preinit 
SVN-Revision: 22465
 2010-08-02 19:32:59 +00:00
Daniel Dickinson 99d0f9ea05 patches-2.6.32/33: Reset button on Comtrend routers is GPIO 33 not GPIO 32 
SVN-Revision: 22464
 2010-08-02 19:32:40 +00:00
Jo-Philipp Wich 00cc52f14b reorder profiles 
SVN-Revision: 22390
 2010-07-26 18:58:35 +00:00
Jo-Philipp Wich 7831006360 fix a typo in 040-bcm963xx_flashmap.patch 
SVN-Revision: 22386
 2010-07-25 00:10:37 +00:00
Imre Kaloz ca8f45b142 update kernel versions 
SVN-Revision: 22289
 2010-07-19 11:34:03 +00:00
Florian Fainelli f6935a4bdb fix alice gate2 internet:green led (#6743) 
SVN-Revision: 22273
 2010-07-18 10:29:44 +00:00
Jo-Philipp Wich abdf25b045 add required exports for wl.ko 
SVN-Revision: 22174
 2010-07-13 17:03:56 +00:00
Claudio Mignanti 2d86ea7bf3 massive: replace occurences of .$(LINUX_KMOD_SUFFIX) with .ko after r21950 
SVN-Revision: 22145
 2010-07-12 14:06:13 +00:00
Jo-Philipp Wich 1650f33f97 add a wifi profile for proprietary wl 
SVN-Revision: 22009
 2010-07-01 01:39:04 +00:00
Florian Fainelli fb94196462 add missing alice gate2 leds (#6743) 
SVN-Revision: 21785
 2010-06-13 12:20:53 +00:00
Florian Fainelli 145fd381d7 do not override cfg80211-related config symbols 
SVN-Revision: 21769
 2010-06-12 18:10:16 +00:00
Gabor Juhos 9bc1e548a1 generic: move more common options to generic configuration 
* CONFIG_ABX500_CORE
 * CONFIG_ATOMIC64_SELFTEST
 * CONFIG_BRIDGE_IGMP_SNOOPING
 * CONFIG_CAIF
 * CONFIG_CEPH_FS
 * CONFIG_CRYSTALHD
 * CONFIG_DEFAULT_SECURITY_SELINUX
 * CONFIG_DEFAULT_SECURITY_SMACK
 * CONFIG_DEFAULT_SECURITY_TOMOYO
 * CONFIG_DT3155
 * CONFIG_IP_MROUTE_MULTIPLE_TABLES
 * CONFIG_L2TP
 * CONFIG_LOGFS
 * CONFIG_LPC_SCH
 * CONFIG_MFD_JANZ_CMODIO
 * CONFIG_MFD_RDC321X
 * CONFIG_N_GSM
 * CONFIG_RAMOOPS
 * CONFIG_SERIAL_ALTERA_JTAGUART
 * CONFIG_SERIAL_ALTERA_UART
 * CONFIG_SERIAL_TIMBERDALE
 * CONFIG_SM_FTL
 * CONFIG_SQUASHFS_XATTRS

SVN-Revision: 21750
 2010-06-10 10:45:51 +00:00
Gabor Juhos 2f328ce488 generic: move some common symbols to generic configuration 
* CONFIG_MUTEX_SPIN_ON_OWNER
 * CONFIG_DEFAULT_HYDLA
 * CONFIG_DEFAULT_VENO

SVN-Revision: 21748
 2010-06-10 08:58:14 +00:00
Gabor Juhos 5cad9d5c73 generic: standardize CONFIG_INLINE_* symbols usage 
SVN-Revision: 21746
 2010-06-10 08:09:41 +00:00
Daniel Dickinson f296eeab53 brcm63xx: Fixed 96348GW (Tecom Gx00) LED definitions to match reality (vs reference design) 
SVN-Revision: 21631
 2010-05-30 02:04:56 +00:00
Daniel Dickinson 6a267cfa76 brcm63xx: Tecom GW6x00 profile: Added hotplug button events and gpio-leds kmods 
SVN-Revision: 21630
 2010-05-30 01:44:37 +00:00
Daniel Dickinson 40c53c6556 brcm63xx: Fixed vlan packet leakage in preinit for known devices with a switch on eth1 (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21629
 2010-05-30 01:33:20 +00:00
Daniel Dickinson 82edb6eafa brcm63xx: Added preinit reset button module loading for devices known to support it and for which /lib/brcm63xx.sh has the definitions (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21628
 2010-05-30 01:33:09 +00:00
Daniel Dickinson cc8fba8441 brcm63xx: Added LED code for preinit (/etc/diag.sh) for 96348GW (Tecom 6x00) 
SVN-Revision: 21627
 2010-05-30 01:32:58 +00:00
Daniel Dickinson bd8cfa63f4 brcm63xx: Added preinit board-type detection (currently only 96348GW - Tecom 6x00) 
SVN-Revision: 21626
 2010-05-30 01:32:47 +00:00
Nicolas Thill e74e289fa8 update linux kernel to 2.6.32.14 
SVN-Revision: 21583
 2010-05-27 18:09:09 +00:00
Nicolas Thill 46e2eea1ef target/linux: refresh 2.6.32 patches 
SVN-Revision: 21566
 2010-05-24 20:35:46 +00:00
Hauke Mehrtens b18a1d217b kernel: update kernel to version 2.6.32.13 and 2.6.33.4 
SVN-Revision: 21540
 2010-05-23 13:16:51 +00:00
Florian Fainelli f89ff525ee revert r21085, fixes #7282 
SVN-Revision: 21352
 2010-05-04 08:07:39 +00:00
Florian Fainelli 1017215649 do not write to per-port over-current register, which is bogus (#6898) 
SVN-Revision: 21306
 2010-05-02 19:14:10 +00:00
Raphaël Huck f87eac79bb rename reset_buttons to buttons 
SVN-Revision: 21255
 2010-04-29 12:54:24 +00:00
Raphaël Huck ccfe1f7886 add WPS button support for nb4 boards 
SVN-Revision: 21254
 2010-04-29 12:51:41 +00:00
Raphaël Huck b29ef93886 fix gpio button key code, match button-hotplug code 
SVN-Revision: 21253
 2010-04-29 12:51:02 +00:00
Raphaël Huck 5af6e7724b fix gpio_button device register 
SVN-Revision: 21252
 2010-04-29 12:50:09 +00:00
Raphaël Huck 73e450f44a fix the setup of MII clock in the case enet1 is linked to external switch for 6358 boards, thx Miguel 
SVN-Revision: 21231
 2010-04-28 12:30:32 +00:00
Raphaël Huck 1a07f81239 extend bcm63xx_wdt driver for debugging purposes, thx Miguel 
SVN-Revision: 21199
 2010-04-27 15:45:03 +00:00
Alexandros C. Couloumbis fdac9ae836 sync to kernel 2.6.32.12 
SVN-Revision: 21195
 2010-04-27 14:30:08 +00:00
Raphaël Huck 8df378a918 add neufbox 4 board support, thx Miguel & Florian 
SVN-Revision: 21193
 2010-04-27 13:49:31 +00:00
Raphaël Huck 266c0bf900 add NXP 74HC164 chip driver support, thx Miguel & Florian 
SVN-Revision: 21192
 2010-04-27 13:48:26 +00:00
Raphaël Huck cf1654354b add extended platform devices patch, thx Miguel & Florian 
SVN-Revision: 21191
 2010-04-27 13:46:22 +00:00
Florian Fainelli d15e136deb fix spi chip select configuration 
SVN-Revision: 21164
 2010-04-26 13:33:48 +00:00
Florian Fainelli 84dd37d930 fix bcm6358 spi base register address (#7234) 
SVN-Revision: 21163
 2010-04-26 09:22:27 +00:00
Florian Fainelli 52231f694d the SPI_CMD register is 16-bits wide 
SVN-Revision: 21162
 2010-04-26 09:22:23 +00:00
Nicolas Thill b1b2b04639 package/kernel: move PCMCIA modules to their own file & submenu 
SVN-Revision: 21136
 2010-04-24 13:53:31 +00:00
Nicolas Thill 484051d055 package/kernel: move target specific modules to their own target files 
SVN-Revision: 21132
 2010-04-24 13:34:51 +00:00
Florian Fainelli 2bab1a43be register spi controller, remove whitespaces 
SVN-Revision: 21096
 2010-04-22 16:35:49 +00:00
Florian Fainelli 6b423d5ecb resync 2.6.33 mtd patch with the one for 2.6.32 
SVN-Revision: 21095
 2010-04-22 16:35:44 +00:00
Florian Fainelli 41836b16bb fix wrong refresh on flashmap patch 
SVN-Revision: 21094
 2010-04-22 16:35:01 +00:00
Florian Fainelli ca3e07d639 re-instate SPI support 
SVN-Revision: 21087
 2010-04-22 15:27:51 +00:00
Florian Fainelli 0b47141194 refresh 2.6.32 patches 
SVN-Revision: 21086
 2010-04-22 15:27:46 +00:00
Florian Fainelli be2a5389e6 alwasy read imagetag with 64K erase block size 
SVN-Revision: 21085
 2010-04-22 15:27:42 +00:00
Gabor Juhos 81062a12ac kernel: refresh patches for 2.6.33.2, and drop md5sum for older 2.6.32 kernels 
SVN-Revision: 21081
 2010-04-22 07:12:09 +00:00
Daniel Dickinson fe5d55977e tools/firmware-utils/imagetag: Fixed Pirelli Alice Gate CRC calculation in imagetag (was invalid strings in bcm_tag.h). Closes #7120 
SVN-Revision: 20850
 2010-04-14 00:45:48 +00:00
Nicolas Thill e2b57ecf5f define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files 
SVN-Revision: 20834
 2010-04-12 23:15:56 +00:00
Florian Fainelli b87e590b24 do not overwrite ENET_CTL_REG, fixes ethernet on bcm6338 
SVN-Revision: 20765
 2010-04-09 18:43:36 +00:00
Florian Fainelli 2a4fb82289 flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. 
SVN-Revision: 20652
 2010-04-01 21:20:43 +00:00