Commit Graph

9507 Commits (4c09d5dde3268f182f23ccbdef7523b0aa837c04)

Author SHA1 Message Date
John Crispin 624eb36fff adds missing symbol
SVN-Revision: 34939
2012-12-30 21:31:10 +00:00
John Crispin ce57efa3ea fixes usb port on arv 4518
SVN-Revision: 34935
2012-12-30 12:38:40 +00:00
Gabor Juhos fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
2012-12-30 08:23:48 +00:00
Gabor Juhos 6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
2012-12-29 17:50:40 +00:00
Gabor Juhos 8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
2012-12-29 17:50:38 +00:00
Gabor Juhos d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
2012-12-29 17:50:35 +00:00
Gabor Juhos 76537041eb ramips: build image for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
2012-12-29 17:50:34 +00:00
Gabor Juhos 3aad9b4c9b ramips: add user-space support for Airlive AIR3GII
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
2012-12-29 17:50:32 +00:00
Gabor Juhos 3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
2012-12-29 17:50:28 +00:00
Gabor Juhos 87271e9f28 ar71xx: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34920
2012-12-29 16:02:31 +00:00
Gabor Juhos a3a6e0f039 ar71xx: Build the AP135 images
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34919
2012-12-29 16:02:28 +00:00
Gabor Juhos dddf05bde2 ar71xx: Add userspace support for AP135
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34918
2012-12-29 16:02:27 +00:00
Gabor Juhos 1a379c5112 ar71xx: Add support for AP135
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34917
2012-12-29 16:02:24 +00:00
Gabor Juhos c6580f64b8 ar71xx: use a backported patch to fix AR933x UART baud rate calculation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34915
2012-12-29 13:52:38 +00:00
Felix Fietkau 348dc70c8c ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size
SVN-Revision: 34912
2012-12-28 21:30:24 +00:00
Felix Fietkau 41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
Felix Fietkau 9bb8b9fadb kernel: remove the cisco SIP NAT patch, at least on 3.6 it crashes
SVN-Revision: 34901
2012-12-27 22:59:51 +00:00
Hauke Mehrtens 981b7410f8 brcm47xx: bcma: correct M25P32 serial flash ID
Thank you Rafał Miłecki.

SVN-Revision: 34900
2012-12-27 19:18:40 +00:00
Gabor Juhos 386c37b4c2 mpc83xx: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34892
2012-12-26 10:40:54 +00:00
Gabor Juhos f67a7a479e mpc83xx: nuke 3.3 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34891
2012-12-26 10:40:51 +00:00
Gabor Juhos 36af140fe4 mpc83xx: switch to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34890
2012-12-26 10:40:50 +00:00
Gabor Juhos c4c8307ca1 mpc83xx: add support for 3.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34889
2012-12-26 10:40:48 +00:00
Gabor Juhos e537b8a093 mpc83xx: create package for the rbppc_cf module
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34888
2012-12-26 10:40:47 +00:00
Gabor Juhos fff75fe5b6 generic: more missing symbols for 3.{6,7}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34887
2012-12-26 10:40:41 +00:00
Gabor Juhos f5b1cba606 ar71xx: build image for the AP136-020
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34886
2012-12-26 09:50:37 +00:00
Gabor Juhos f3f05d86fe ar71xx: add user-space support for AP136-020
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34885
2012-12-26 09:50:36 +00:00
Gabor Juhos ed1889db33 ar71xx: add kernel support for the AP136-020 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34884
2012-12-26 09:50:34 +00:00
Gabor Juhos c887a7fe4e ar71xx: rename AP136 to AP136-010
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34883
2012-12-26 09:50:31 +00:00
Gabor Juhos f8b4dfd172 ar71xx: dynamically set AR8327's PAD configuration on AP136
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34882
2012-12-25 18:45:32 +00:00
Gabor Juhos d4b4c7d102 generic: ar8216: add sgmii_delay_en field to ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34881
2012-12-25 18:45:31 +00:00
Gabor Juhos 1dc2b6e8fa ar71xx: ag71xx: show PHY interface mode in dmesg
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34880
2012-12-25 18:45:29 +00:00
Gabor Juhos 69da894432 ramips: fix ASUS WL-330N3G MAC address
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
2012-12-24 06:52:41 +00:00
Gabor Juhos c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
2012-12-24 06:52:38 +00:00
Imre Kaloz 2c05915b24 add nol2x0 cmdline to disable l2x0 cache
L2 cache via L2X0 cache controller available on some ARM boards can
provide a performance boost in some situations but decrease performance
in others.  This adds a kernel cmdline to disable L2X0 for cns3xxx based
boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

SVN-Revision: 34874
2012-12-23 18:53:38 +00:00
Gabor Juhos c3cb63661f generic: ar8216: don't use 0 as default VID on AR8327
VID0 is reserved for priority-tagged packets.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34862
2012-12-22 18:30:04 +00:00
Gabor Juhos fa9d06c7f4 generic: more missing symbols for 3.{6,7}
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34861
2012-12-22 17:22:41 +00:00
Gabor Juhos 8105c6badd ramips: unify eeprom file name for the built-in wireless MAC
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
2012-12-22 16:09:03 +00:00
Gabor Juhos c81b4475c9 ramips: rt3883: fix build error
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
2012-12-22 13:50:47 +00:00
Gabor Juhos 64d31e6c6b ar71xx: register the second ethernet interface on the AP136
Also fix the default network configuration
according to the new setup.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34854
2012-12-22 12:12:50 +00:00
Gabor Juhos 5dec87afef ar71xx: fix ethernet device registration for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34853
2012-12-22 12:12:48 +00:00
Gabor Juhos 84a7051cef ar71xx: rename QCA9558 ETH_CFG bit defines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34852
2012-12-22 12:12:46 +00:00
Gabor Juhos 4085a5773d ar71xx: fixup allowed PHY interface types for QCA9558
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34851
2012-12-22 12:12:44 +00:00
Gabor Juhos f01a786825 ar71xx: don't assign any MII bus device on QCA9558 by default
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34850
2012-12-22 12:12:43 +00:00
Gabor Juhos 9edcd9d3a3 ar71xx: ag71xx: fix mii_bus_dev sanity check
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34849
2012-12-22 12:12:41 +00:00
Gabor Juhos ad0f03d250 ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev
Trying to do that causes a NULL pointer dereference:

CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1]:
Cpu 0
$ 0   : 00000000 00000000 00000000 00000001
$ 4   : 00000000 802e6390 ffff8f45 00000001
$ 8   : 804b5360 ffffff80 802f93bc 00000000
$12   : 802f93e8 00000000 00000000 00000000
$16   : 8381aba0 8381aba0 00000000 00000000
$20   : 8295eff0 00000032 80000000 004101b8
$24   : 00000000 777265b0
$28   : 82936000 82937cf0 00420000 801d18d4
Hi    : 00000000
Lo    : 00000001
epc   : 801d170c ar7240sw_reset+0x1c/0x19c
    Tainted: G           O
ra    : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03    KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId  : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
 ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
        8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
        8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
        8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
        8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
        ...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024  afb40020  afb10014 <8c910000> 00809021  24100104 24130704  8e440000  02002821

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34848
2012-12-22 12:12:40 +00:00
Gabor Juhos 3931c9524c generic: ar8316: allow to configure port 6 via platform data on AR8327
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34847
2012-12-22 12:12:37 +00:00
Gabor Juhos a0b31f97bb generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
Gabor Juhos b44cdcde8e ramips: add support for 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
2012-12-22 12:11:13 +00:00
Gabor Juhos b81667cb23 ramips: convert to use {e,o}hci-platform driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
2012-12-22 12:11:08 +00:00
Gabor Juhos c0e1a6f342 generic/3.6: add platform specific power callbacks to {e,o}hci_platform drivers
Backport of upstream commits:

86e4cb35f2260374df4139c2352afe7fe247cb60 usb: host: ehci-platform: BUG_ON() to WARN_ON() on probe
b6dd245c4594482d46507a0bfd100439be367952 usb: host: ohci-platform: BUG_ON() to WARN_ON() on probe
04216bedafb1b3992a6c2b7f1518281d2ba5fc7b usb: host: ehci-platform: add platform specific power callback
e4d37aeb373a5edceecc1dadc76fabbe8bc18e44 usb: host: ohci-platform: addplatform specific power callback

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34842
2012-12-22 12:11:06 +00:00