Commit Graph

52 Commits (4b3d17b709a57ca47f0815a54d559cb2265c1060)

Author SHA1 Message Date
Rosen Penev 26dcaf58ee comgt: Fix 3g.sh permissions
3g.sh needs to be executable. 600 is not correct for that.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-12-06 08:42:39 +01:00
Rosen Penev c7144ec688 comgt: Install hotplug and netifd files as 600
procd and netifd both run as root. These files are not used elsewhere.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2018-10-11 08:06:28 +02:00
Giuseppe Lippolis 774d7fc9f2 comgt: increase timeout on runcommands
Some combination of modem/wireless operator requires more time to
execute the commands.
Tested on DWR-512 embedded wwan modem and italian operator iliad (new
virtual operator).

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2018-08-29 08:34:10 +02:00
Lorenzo Santina fd84ecda7d treewide: fix shellscript syntax errors/typos
Fix multiple syntax errors in shelscripts (of packages only)
These errors were causing many conditions to not working properly

Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it>
[increase PKG_RELEASE, drop command substitution from directip.sh]
Signed-off-by: Mathias Kresin <dev@kresin.em>
2017-09-13 08:07:54 +02:00
Giuseppe Lippolis 4ba2f4dc63 DWR-512: adding wwan support for the dwr-512 3G modem
This PR allow the 3G modem embedded in the DWR-512 to be managed
by the wwan-ncm scripts. The modem will use the usb-option and
usb-cdc-ether drivers.
The DWR-512 DT is updated accordingly.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2017-05-25 19:01:08 +02:00
Giuseppe Lippolis db776c01e1 comgt-3g: enable modem before to setpin
some modems needs to be enabled with CFUN=1 before to set the pin

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2017-05-18 07:07:00 +02:00
Felix Fietkau 1ca31b0931 comgt: mark as nonshared because of the usb dependencies
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-13 12:08:08 +01:00
Felix Fietkau 1ad30be982 Revert the recent dependency and metadata scanning rework
This reverts the following commits:
fbe522d120
278ad007ee
863888e44f
96daf6352f
cfd83555fc

This seems to trigger some mconf bugs when built with all feeds
packages, so I will try to find a less intrusive solution before the
release.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 19:48:09 +01:00
Felix Fietkau fbe522d120 comgt: allow build without USB_SUPPORT
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-11 18:24:40 +01:00
Cezary Jackiewicz 83eca5d8b7 comgt-ncm: fix typo Fix typo in ncm.sh. Resolves:
Wed Dec 21 09:55:54 2016 daemon.notice netifd: wan (4455): ./ncm.sh: eval: line 1: =IP: not found

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-12-22 15:02:35 +01:00
Nickolay Ledovskikh 13ab314b0b comgt: add support of using device symlinks.
It's useful when using multiple usb devices that should be bound to
certain usb ports. Symlinks are created by hotplug handlers.

Signed-off-by: Nickolay Ledovskikh <nledovskikh@gmail.com>
2016-12-20 09:35:35 +01:00
Felix Fietkau 720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Matti Laakso 5bd3b9dfc0 comgt-ncm: Add support for specifying profile index
Add support for specifying a call profile index instead of APN. A
specific index different from 1 must be used for some service
provider and modem combinations.

In addition, change the manufacturer detection to use the standard
AT+CGMI command, which produces more predictable output than ATI,
remove the redundant ipv6 option, since it is less ambiguous to
directly specify the PDP context type with mobile connections, and
fix missing device during teardown when using ncm through the wwan
proto.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
2016-12-14 10:37:01 +01:00
Alberto Bursi e4fef72244 comgt: move to WWAN submenu, fixed link
moving comgt and its modules to WWAN submenu to join uqmi as both are tools for WWAN modems.

I replaced the link with comgt's ubuntu manpage because the old link isn't working anymore.

Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
2016-11-08 11:17:10 +01:00
Cezary Jackiewicz 862e7fb7b3 gcom: Fix 'mode' option for ncm
For Huawei devices like E3372 proper command for set lte mode is:

AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,,

Eval is required for proper quotation.

Without this fix:

Fri Nov  4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Nov  4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT
Fri Nov  4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ
Fri Nov  4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0
Fri Nov  4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1
Fri Nov  4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1
Fri Nov  4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0
Fri Nov  4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet"
Fri Nov  4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,,
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode
Fri Nov  4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network
...

With this fix:

Fri Nov  4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now
Fri Nov  4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT
Fri Nov  4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ
Fri Nov  4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0
Fri Nov  4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1
Fri Nov  4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1
Fri Nov  4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0
Fri Nov  4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet"
Fri Nov  4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,,
Fri Nov  4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet"
Fri Nov  4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity
Fri Nov  4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now
...

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-11-08 05:49:58 +01:00
Marcin Jurkowski 72eb2b8e22 comgt: add metric, defaultroute and peerdns options for directip protocol
Adds generic network options for directip protocol dynamic interfaces
as suggested by Felix in
https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html.

This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
2016-10-26 12:37:46 +02:00
Marcin Jurkowski c560d25d19 comgt: add metric, defaultroute and peerdns options for ncm protocol
Adds generic network options for ncm protocol dynamic interfaces
as suggested by Felix in
http://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html.

This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/.

Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
2016-10-26 12:37:46 +02:00
Felix Fietkau 7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Steven Barth 3c335bb439 ppp: use more reliable way to set script environment
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46942
2015-09-15 14:52:47 +00:00
Steven Barth 60a96cfdb7 comgt-ncm: Add possibility to choose PDP context type
By setting the option pdptype to IP, IPV6 or IPV4V6 the user can
choose the context type between IPv4, IPv6 and dual stack,
respectively. The default setting is dual stack, except if option
ipv6=0 is specified, in which case IPv4 context is the default.
This allows for an out-of-the-box IPv6 support with modems
utilizing NCM-like protocols.

While we are at it, also add commands for Sierra DirectIP modems
(currently untested), which will allow us to drop the separate
comgt-directip package (once tested and verified working).

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 46844
2015-09-11 06:46:42 +00:00
Steven Barth f96bf30dc6 comgt/umbim/uqmi: enable RFC 7278 for 3g/4g by default
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46780
2015-09-03 15:53:40 +00:00
John Crispin 657300d418 comgt: make ncm proto work via wwan proto
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46272
2015-07-08 14:26:04 +00:00
John Crispin 841b50a665 comgt: the package contained too many files
fixes #19698

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45741
2015-05-23 15:29:46 +00:00
Steven Barth 0d1b5a1fd2 network: also shorten virtual interface names of ppp and 3g/4g connections
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 45479
2015-04-17 14:47:12 +00:00
Nicolas Thill fe46689f10 packages: use $(LN) macro, make symlinks relative
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 45250
2015-04-03 00:07:43 +00:00
John Crispin f1dcfec6d8 ncm, qmi, mbim: Add dependency on wwan package
The wwan package holds the hotplug script to set mobile broadband
interfaces (un)available. Add it as a dependency to comgt-ncm,
uqmi and umbim.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44631
2015-03-09 14:07:06 +00:00
John Crispin 6ab19b7f46 ncm: Remove unnecessary proto_set_available commands
Interface should not be set unavailable in all error cases,
returning 1 is enough.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44630
2015-03-09 14:06:50 +00:00
John Crispin dfb9e7c31c comgt, wwan: Move USB data files to wwan package
USB modem data files should be a part of the wwan package, which
actually uses them unlike comgt.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44628
2015-03-09 14:06:20 +00:00
John Crispin 291e04ee8f comgt: Use TCGETS and TCSETS ioctls for struct termios
When passing struct termios to ioctl TCGETS and TCSETS should be
used instead of TCGETA and TCSETA, which are meant for the older
struct termio. Should fix https://dev.openwrt.org/ticket/19012

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44506
2015-02-22 08:29:26 +00:00
John Crispin 623716dd43 comgt-ncm: Fix NCM protocol
This patch fixes the NCM protocol by adding the missing ifname
to the netifd script and changing one unintended "send" statement to
"print" in runcommand.gcom. It also cleans up logging and makes the
manufacturer names case-insensitive. Furthermore, comgt-ncm should
not depend on the USB-serial-related kernel modules, as the cdc-wdm
control device works without them. There is also no need to depend on
kmod-huawei-cdc-ncm, since other manufacturers (like Sony-Ericsson
and Samsung) which use other kernel modules should also be supported.

I'd appreciate if someone with Samsung or Sony-Ericsson modems could
test this, I was only able to test it with Huawei E3276, E3372 and
E353.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44182
2015-01-28 19:19:33 +00:00
John Crispin eb6acdf6b4 comgt: Allow using non-TTY devices
Some Huawei mobile broadband sticks utilizing the NCM protocol expose
the control channel as a cdc-wdm device node instead of a virtual TTY.
This device node does not support the terminal ioctls. This patch
adds a check whether the provided device is a TTY or not and does not
attempt to use the terminal ioctls if they are not supported.

v2: reduce diffstat by simplifying code a little
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 44054
2015-01-20 06:33:49 +00:00
John Crispin 74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
Steven Barth bec9d38fa4 Add a few SPDX tags
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43151
2014-11-02 12:20:54 +00:00
John Crispin 27570407f4 comgt: fix typo in the ncm proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43071
2014-10-26 16:57:38 +00:00
Felix Fietkau 2579261b7b comgt: drop the use of the non-standard XCASE termios flag (#18186)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43014
2014-10-21 20:32:05 +00:00
Imre Kaloz 48c507b7ed fix compile against musl
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43000
2014-10-20 10:00:02 +00:00
John Crispin 51a5ff0947 comgt: add ncm proto support
This will not work for all board/dongle combinations until we hit 3.17.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 42866
2014-10-10 08:56:33 +00:00
John Crispin 90120bb771 wwan: add a generic 3g/4g proto
this proto handler will detect which of 3g, qmi, mbim, ncm or directip you need
for a stick and setup uci automagically

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42837
2014-10-08 08:01:20 +00:00
John Crispin 1df98fcd5a comgt: split directip support into its own package
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42836
2014-10-08 08:00:55 +00:00
Felix Fietkau 16b3eae040 comgt: fix directip auth type
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42671
2014-09-26 15:55:45 +00:00
Steven Barth e5190a77e1 comgt: fireup a dhcpv6-client for directip as well
SVN-Revision: 42670
2014-09-26 13:58:40 +00:00
Felix Fietkau 45bd5ebfef comgt: in directip, derive the wwan ifname automatically instead of specifying it in the config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42669
2014-09-26 13:44:21 +00:00
Felix Fietkau cb2642b09b comgt: initialize ifname for directip
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42658
2014-09-24 17:04:20 +00:00
Felix Fietkau d234ad9dd9 comgt: add no_device=1 for directip proto
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42657
2014-09-24 08:07:45 +00:00
Felix Fietkau 9fa791f62b comgt: fix misplaced : in directip setup script
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42656
2014-09-24 08:07:40 +00:00
John Crispin 7bad68804c comgt: add directip proto
add a proto handler for sierra wireless directip modems

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42465
2014-09-11 12:26:31 +00:00
Felix Fietkau b3b55de395 build: disable the PKG_CHECK_FORMAT_SECURITY check for the failing packages
The idea is to gradually fix the packages

Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>

SVN-Revision: 41411
2014-06-30 08:19:48 +00:00
John Crispin 8e7b9741b0 comgt: add support for defining dial number in config file
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

SVN-Revision: 40942
2014-06-02 12:45:09 +00:00
John Crispin ed72f7102c comgt: add validation rules to proto handler
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 39618
2014-02-18 13:33:52 +00:00