Commit Graph

28 Commits (496bdd9eb769813854924e18d204546a899fa9d5)

Author SHA1 Message Date
Felix Fietkau b014357704 set marvell switch ATU ageing time to minimum instead of maximum - hopefully fixes some fonera 2.0 ethernet issues
SVN-Revision: 11410
2008-06-09 10:31:46 +00:00
Peter Denison 3b7d3cf074 Remove bogus zero-length ohci-ssb.c in generic-2.6/files
SVN-Revision: 11190
2008-05-18 20:55:06 +00:00
Felix Fietkau 9e0ee80132 enable a different pseudo-vlan mode in the marvell switch (uses a proprietary header instead of a proprietary trailer) - fixes some mtu issues
SVN-Revision: 10975
2008-04-29 12:55:44 +00:00
Felix Fietkau c3fcb26d47 allow bigger packets in the marvell switch (does not fix the mtu problems yet)
SVN-Revision: 10970
2008-04-28 21:59:06 +00:00
Felix Fietkau 86bbc820d5 fix vlan mapping for cpu port on the marvell switch
SVN-Revision: 10934
2008-04-24 01:09:47 +00:00
Felix Fietkau 69999abeda clear VLANTunnel bit on the marvell switch ports - should help with some bridging issues
SVN-Revision: 10931
2008-04-23 16:28:05 +00:00
Felix Fietkau 11d94ce083 Add support for the ultra-crappy Marvell 88E6060, which is used in Fonera+ and the upcoming Fonera 2.0
SVN-Revision: 10876
2008-04-20 08:29:01 +00:00
Felix Fietkau a323a7bf2a Add stub driver for ADM6996F switches (configured through MII) The driver currently uses a hardcoded VLAN mapping and has no configuration yet Tested on Accton MR3202a
SVN-Revision: 10869
2008-04-20 02:53:04 +00:00
Gabor Juhos 67fd9d7fba move spi_gpio driver into the kernel, clean-up SPI modules
SVN-Revision: 10844
2008-04-15 07:33:43 +00:00
Gabor Juhos 832ba73685 modules/gpio-buttons: fix build error on older kernels
SVN-Revision: 10771
2008-04-08 11:49:22 +00:00
Michael Büsch 2e8af76a60 ssb-mips: Fix IRQ routing on the MIPS core.
SVN-Revision: 10770
2008-04-08 09:15:53 +00:00
Gabor Juhos 5798590c7c add a polled GPIO buttons input driver
SVN-Revision: 10766
2008-04-07 19:54:44 +00:00
Michael Büsch 68523387b3 GPIODEV: Fix open-count race condition.
SVN-Revision: 10625
2008-03-19 11:32:08 +00:00
John Crispin 9e6b3d16de add new led trigger for network traffic, fixes #2776
SVN-Revision: 10566
2008-03-07 21:25:02 +00:00
Michael Büsch c57ca284ce ssb: Update to latest upstream version of ssb.
SVN-Revision: 10490
2008-02-19 01:24:18 +00:00
Michael Büsch 670b7ab883 b43: Make probing of NPHY devices possible.
SVN-Revision: 10487
2008-02-18 22:21:29 +00:00
Felix Fietkau a2ba826425 "default-on" LED Trigger
The current LED subsystem always initialises LEDs in the OFF state. This is fine for most LEDs but some should be on right from boot (e.g. POWER LED). Following some discussion with the LED subsystem maintainers, a trigger was recommended as the best way to implement this functionality.

Here is a patch to add a new trigger "default-on" which will initialise an LED in the ON state. It is not compiled by default.

Particular thanks to Rod Whitby for all his help with this.

Signed-off-by: Nick Forbes <nick.forbes@incepta.com>

SVN-Revision: 10348
2008-02-02 01:21:54 +00:00
John Crispin 8f39c35159 add userspace tool for gpio_dev
SVN-Revision: 10267
2008-01-26 04:24:05 +00:00
John Crispin 2a8b143cb3 remove binary file
SVN-Revision: 10262
2008-01-26 03:17:35 +00:00
John Crispin 0844d5fe49 add generic gpio char dev for CONFIG_GENERIC_GPIO archs
SVN-Revision: 10261
2008-01-26 03:16:11 +00:00
Felix Fietkau 985ee9fc8f LED driver for PCEngines ALIX boards
This patch adds a driver for the three LEDs that exists on the
PCEngines ALIX 2 and 3 series boards.

The driver is also added to the Alix profile.

Signed-off-by: Petr Liebman <petrliebman@gmail.com>

--

SVN-Revision: 9748
2007-12-14 00:52:15 +00:00
Florian Fainelli a86b7992f9 Forgot removing that file while applying patch from #2757
SVN-Revision: 9690
2007-12-09 17:52:27 +00:00
Gabor Juhos ab8a75d73f make morse LED trigger available as a package, and fix it to compile with 2.6.23
SVN-Revision: 9363
2007-10-20 14:32:13 +00:00
Felix Fietkau fd811bf54c sync ssb with upstream
SVN-Revision: 9302
2007-10-14 02:47:36 +00:00
Felix Fietkau ceb5350cd3 back out change to generic-2.6/files/ and update 310-ssb_pcicore_fixes.patch for 2.6.23
SVN-Revision: 9281
2007-10-13 02:21:24 +00:00
Felix Fietkau 30777ac989 add patches for 2.6.23 on brcm47xx (not enabled yet)
SVN-Revision: 9279
2007-10-13 02:04:37 +00:00
Gabor Juhos 5d4112737d add missing file from [9055]
SVN-Revision: 9056
2007-09-28 20:08:55 +00:00
Peter Denison 46d194834b Move SSB out of brcm47xx target into generic-2.6 target
SVN-Revision: 7844
2007-07-01 22:44:05 +00:00