53e0ba49b9
ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed
...
SVN-Revision: 35127
2013-01-13 13:06:09 +00:00
764520975c
ar71xx: add more cpu feature overrides, slightly reduces kernel size
...
SVN-Revision: 35125
2013-01-13 11:33:48 +00:00
310724c14d
ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel
...
SVN-Revision: 35124
2013-01-13 11:33:44 +00:00
eb2188c0e2
ar71xx: remove 3.6 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35114
2013-01-12 12:25:38 +00:00
fe86bc9370
ar71xx: switch to 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35113
2013-01-12 12:25:36 +00:00
ba4de984b9
ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
...
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.
Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.
Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35037
2013-01-07 14:30:37 +00:00
251e4608b0
ar71xx: add missing Makefile entry to the 74HC153 GPIO patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35035
2013-01-07 14:14:41 +00:00
e1965a1d1a
ar71xx: register the NAND flash controller device on the AP135/136 boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34946
2013-01-01 13:10:41 +00:00
66efec6783
ar71xx: allow to register the NAND flash controller on the QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34945
2013-01-01 13:10:36 +00:00
2c77e5d7b3
ar71xxx: allow to select ATH79_DEV_NFC for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34944
2013-01-01 13:10:34 +00:00
d8446d65fe
ar71xxx: allow to build the ar934x_nfc driver for QCA955x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34943
2013-01-01 13:10:29 +00:00
93c322cacc
ar71xx: fix NAND controller base for QCA955x SoCs
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34942
2013-01-01 13:10:26 +00:00
b57cc9a538
ar71xx: fold AP135 patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34941
2013-01-01 13:10:22 +00:00
87271e9f28
ar71xx: add support for 3.7
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34920
2012-12-29 16:02:31 +00:00
a3a6e0f039
ar71xx: Build the AP135 images
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34919
2012-12-29 16:02:28 +00:00
dddf05bde2
ar71xx: Add userspace support for AP135
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34918
2012-12-29 16:02:27 +00:00
1a379c5112
ar71xx: Add support for AP135
...
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34917
2012-12-29 16:02:24 +00:00
c6580f64b8
ar71xx: use a backported patch to fix AR933x UART baud rate calculation
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34915
2012-12-29 13:52:38 +00:00
348dc70c8c
ar71xx: change the unaligned access hack to assume an alignment of 2 bytes, slightly improves performance and code size
...
SVN-Revision: 34912
2012-12-28 21:30:24 +00:00
41a039f464
mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration
...
SVN-Revision: 34909
2012-12-28 19:17:19 +00:00
f5b1cba606
ar71xx: build image for the AP136-020
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34886
2012-12-26 09:50:37 +00:00
f3f05d86fe
ar71xx: add user-space support for AP136-020
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34885
2012-12-26 09:50:36 +00:00
ed1889db33
ar71xx: add kernel support for the AP136-020 board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34884
2012-12-26 09:50:34 +00:00
c887a7fe4e
ar71xx: rename AP136 to AP136-010
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34883
2012-12-26 09:50:31 +00:00
f8b4dfd172
ar71xx: dynamically set AR8327's PAD configuration on AP136
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34882
2012-12-25 18:45:32 +00:00
1dc2b6e8fa
ar71xx: ag71xx: show PHY interface mode in dmesg
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34880
2012-12-25 18:45:29 +00:00
64d31e6c6b
ar71xx: register the second ethernet interface on the AP136
...
Also fix the default network configuration
according to the new setup.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34854
2012-12-22 12:12:50 +00:00
5dec87afef
ar71xx: fix ethernet device registration for QCA9558
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34853
2012-12-22 12:12:48 +00:00
84a7051cef
ar71xx: rename QCA9558 ETH_CFG bit defines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34852
2012-12-22 12:12:46 +00:00
4085a5773d
ar71xx: fixup allowed PHY interface types for QCA9558
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34851
2012-12-22 12:12:44 +00:00
f01a786825
ar71xx: don't assign any MII bus device on QCA9558 by default
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34850
2012-12-22 12:12:43 +00:00
9edcd9d3a3
ar71xx: ag71xx: fix mii_bus_dev sanity check
...
The mii_bus device is not required if phy_mask is zero.
The driver will use a fixed connection if it is not
specified.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34849
2012-12-22 12:12:41 +00:00
ad0f03d250
ar71xx: ag71xx: don't start/stop built-in switch w/o mii_bus_dev
...
Trying to do that causes a NULL pointer dereference:
CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 801d170c, ra == 801d18d4
Oops[#1 ]:
Cpu 0
$ 0 : 00000000 00000000 00000000 00000001
$ 4 : 00000000 802e6390 ffff8f45 00000001
$ 8 : 804b5360 ffffff80 802f93bc 00000000
$12 : 802f93e8 00000000 00000000 00000000
$16 : 8381aba0 8381aba0 00000000 00000000
$20 : 8295eff0 00000032 80000000 004101b8
$24 : 00000000 777265b0
$28 : 82936000 82937cf0 00420000 801d18d4
Hi : 00000000
Lo : 00000001
epc : 801d170c ar7240sw_reset+0x1c/0x19c
Tainted: G O
ra : 801d18d4 ag71xx_ar7240_start+0x28/0xc0
Status: 1100fc03 KERNEL EXL IE
Cause : 00800008
BadVA : 00000000
PrId : 00019750 (MIPS 74Kc)
Modules linked in: ath79_wdt ohci_hcd ledtrig_usbdev ledtrig_netdev
nf_nat_irc nf_nat_ftp nf_conntrack_irc nf_conntrack_ftp
ipt_MASQUERADE iptable_nat nf_nat pppoe xt_conntrack xt_CT xt_NOTRACK
iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4 nf_conntrack
ehci_hcd pppox ipt_REJECT xt_TCPMSS xt_LOG xt_comment xt_multiport
xt_mac xt_limit iptable_mangle iptable_filter ip_tables xt_tcpudp x_tab
les ppp_async ppp_generic slhc ath9k(O) ath9k_common(O) ath9k_hw(O)
ath(O) mac80211(O) usbcore usb_common nls_base crc_ccitt cfg80211(O) c
ompat(O) arc4 aes_generic crypto_blkcipher cryptomgr aead crypto_hash
crypto_algapi ledtrig_timer ledtrig_default_on leds_gpio gpio_button
_hotplug(O)
Process netifd (pid: 677, threadinfo=82936000, task=82cbe140, tls=77803750)
Stack : ffffffff 80087900 00000001 82937d74 8381aba0 8381aba0 00000000 00000000
8295eff0 801d18d4 8295eff0 801fa4a4 00420000 80092158 00000002 8381aba0
8381a800 00000000 00000080 801cf900 8027e720 00000000 00000000 8009223c
8381a800 8381a82c 8027e720 00000000 00000000 7f9d14f0 00420000 801ec08c
8381a800 801ebfb0 33000000 82937e30 00000001 8381a800 00001003 801ec348
...
Call Trace:
[<801d170c>] ar7240sw_reset+0x1c/0x19c
[<801d18d4>] ag71xx_ar7240_start+0x28/0xc0
[<801cf900>] ag71xx_open+0x1d0/0x258
[<801ec08c>] __dev_open+0xcc/0x130
[<801ec348>] __dev_change_flags+0xc0/0x160
[<801ec490>] dev_change_flags+0x20/0x6c
[<801ec5c8>] dev_ifsioc+0xec/0x348
[<801ecdb8>] dev_ioctl+0x594/0x67c
[<800ec00c>] do_vfs_ioctl+0x598/0x5ec
[<800ec0b0>] sys_ioctl+0x50/0x90
[<8006a3c4>] stack_done+0x20/0x40
Code: afbf0024 afb40020 afb10014 <8c910000> 00809021 24100104 24130704 8e440000 02002821
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34848
2012-12-22 12:12:40 +00:00
a0b31f97bb
generic: ar8216: rename cpuport_cfg to port0_cfg in ar8327_platform_data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34846
2012-12-22 12:12:35 +00:00
e108cb91c0
ar71xx: rename fix-ar933x-reset patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34798
2012-12-20 14:13:16 +00:00
e34a4e0c7b
Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
...
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
5f82aa4d15
ar71xx: merge machine patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34783
2012-12-19 08:50:45 +00:00
cf99770800
ar71xx: build image for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: reorder MR3220 MultiProfile entry]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34782
2012-12-19 08:50:44 +00:00
b1b7aa674e
ar71xx: add user-space support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg: add uci-defaults/network support]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34780
2012-12-19 08:50:41 +00:00
0767605d17
ar71xx: add kernel support for the TL-MR3220 v2
...
Based on the following patch:
http://patchwork.openwrt.org/patch/3043/
[juhosg:
- remove custom LED and button arrays
- use separate machine specific patch
- update Kconfig]
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34779
2012-12-19 08:50:35 +00:00
149534f3ed
ar71xx: image: add OpenMesh profile
...
It allows to build firmware images for all OpenMesh
products in one step.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34761
2012-12-18 15:16:05 +00:00
44b9898251
kernel: update linux 3.6 to 3.6.11
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
fc0da6852e
ar71xx: nuke 3.3 support
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34743
2012-12-17 22:28:09 +00:00
61d715505c
ar71xx: add profile and build image for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34730
2012-12-17 12:28:21 +00:00
abbd18776e
ar71xx: add user-space support for UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34728
2012-12-17 12:28:11 +00:00
ff3f28265f
ar71xx: add kernel support for the UniFi AP Pro
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34727
2012-12-17 12:28:02 +00:00
2e2c88b625
ar71xx: reorder some patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34674
2012-12-14 07:16:56 +00:00
34411a0cbd
ar71xx: merge unifi outdoor patch into the ubnt-xm one
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34673
2012-12-14 07:16:50 +00:00
d085aad288
ar71xx: add profile and build initramfs image for the WNDR4300
...
It is not yet possible to use the default squasfsh/jffs2 images
on NAND flashes, so only initramfs image is supported for now.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34650
2012-12-12 16:49:52 +00:00
dcdfcb75f0
ar71xx: add user-space support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34649
2012-12-12 16:49:51 +00:00
bc82db7d78
ar71xx: add kernel support for the NETGEAR WNDR4300
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34647
2012-12-12 16:49:49 +00:00
75b71f4a74
ar71xx: add ap91_pci_init_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34646
2012-12-12 16:49:48 +00:00
d7cebac243
ar71xx: add ath79_wmac_register_simple helper
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34645
2012-12-12 16:49:47 +00:00
ec26814b0e
ar71xx: refresh 3.3 patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34644
2012-12-12 16:49:46 +00:00
cdfc300948
ar71xx: remove superfluous USB patches for 3.3
...
SVN-Revision: 34643
2012-12-12 16:49:43 +00:00
2b378d11c8
kernel: update linux 3.6 to 3.6.10
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
3cbc1a49e2
ar71xx: load ar934x_nfc driver earlier
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34589
2012-12-10 10:38:11 +00:00
1f7ae58a2c
ar71xx: ar934x_nfc: allow to control DMA data swap via platform data
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34588
2012-12-10 10:38:07 +00:00
2581173660
kernel: update linux 3.6 to 3.6.9
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
47f9b2a110
ar71xx: TP-LINK also has a family TL-WDR
...
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34577
2012-12-07 19:10:57 +00:00
d7ba2b4840
ar71xx: add profile and build image for TP-LINK TL-WA801N/ND
...
Patch-by: Amir Sagie <openwrt-devel@taproot.org.il>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34576
2012-12-07 19:10:56 +00:00
4f5defdc3b
ar71xx: switch to 3.6.8
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34414
2012-11-29 17:53:42 +00:00
c2f018fca2
remove common symbols from 3.6 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
1f516235ea
remove common symbols from 3.3 configs
...
The removed symbols are present in the generic configuration.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
3a4d0ebd5c
kernel: update linux 3.6 to 3.6.8
...
Also refresh the affected patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
b0b994cf76
ar71xx: set pad6 cfg for AR8327 on the AP136 board
...
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
188908e885
ar71xx: make rb750_nand driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34279
2012-11-20 16:29:43 +00:00
8194237789
ar71xx: make ar934x_nfc driver compatible with 3.7
...
Also add compatibility patches for the currently
supported kernels.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34278
2012-11-20 16:29:42 +00:00
4468fd7ae4
ar71xx: refresh rb4xx_nand patch
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34277
2012-11-20 15:53:17 +00:00
46a3b818b9
ar71xx: remove buffer verification reference from rb4xx_nand.c
...
It is a dead code.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34276
2012-11-20 14:40:22 +00:00
674b91ce0e
ar71xx: fix GPIO function selection for AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34275
2012-11-20 14:27:17 +00:00
d833ca527d
ar71xx: restore rb4xx kernel partition size to the original value
...
The new lzma compressed elf kernel image fits into
that, even on devices with large page NAND chips.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34274
2012-11-20 12:17:45 +00:00
33a99ce46b
ar71xx: install lzma compressed elf kernel image from wget2nand
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34273
2012-11-20 12:17:44 +00:00
68b5aa2fdf
ar71xx/image: provide lzma compressed elf kernel image
...
This will be used on the RB4xx/RB7xx/RB2011 boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34272
2012-11-20 12:17:43 +00:00
97867f8717
ar71xx/image: relink loader.elf image to LOADADDR
...
This allows to load the resulting image directly
from RouterBOOT.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34271
2012-11-20 12:17:41 +00:00
8e4cefc7f8
refresh all kernel configurations
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34267
2012-11-20 07:19:06 +00:00
d577d69838
ar71xx: use custom LZMA dictionary size for WNDR3700 images
...
Based on a patch by Hannu Nyman.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34248
2012-11-18 20:25:13 +00:00
169e596268
ar71xx: add user-space support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34240
2012-11-18 10:18:02 +00:00
d44d954dec
ar71xx: add kernel support for the RB435G board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34239
2012-11-18 10:18:01 +00:00
d62bddc620
ar71xx: update PCI IRQ map for RB4xx devices
...
Should fix #12269 .
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34238
2012-11-18 09:51:04 +00:00
31881357af
ar71xx: create profile and build image for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34237
2012-11-18 09:32:41 +00:00
9da2c85b67
ar71xx: enable sysupgrade for the OpenMesh MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34235
2012-11-18 09:32:39 +00:00
6380301d01
ar71xx: rename om2p.sh upgrade script to openmesh.sh
...
It will be used on other boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34234
2012-11-18 09:32:37 +00:00
d325e622d2
scripts/om-fwupgradecfg-gen.sh: add support for the MR600
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34233
2012-11-18 09:32:36 +00:00
c3174179b7
ar71xx: add user-space support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34232
2012-11-18 09:32:35 +00:00
8d4857d677
ar71xx: add kernel support for the OpenMesh MR600 board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34231
2012-11-18 09:32:33 +00:00
7da001d068
scripts: rename om2p-fwupgradecfg-gen.sh to more generic om-fwupgradecfg-gen.sh
...
It will be used for non OM2P boards as well.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34200
2012-11-14 14:18:33 +00:00
ee94ed4597
ar71xx: add profile and build image for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34198
2012-11-13 20:57:19 +00:00
9c5c079329
ar71xx: add user-space support for the Ubiquiti UniFi AP-Outdoor board
...
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34197
2012-11-13 20:57:18 +00:00
75c1d3ccc2
ar71xx: add support for the Ubiquiti UniFi AP-Outdoor device
...
[juhosg:
- rename and refresh 660-MIPS-ath79-ubnt-xm-add-unifi-outdoor patches
- wrap long lines in mach-ubnt-xm
- remove default network config, set it from uci-defaults/network
instead
- remove user-space, and image generation stuff]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34196
2012-11-13 20:57:17 +00:00
7ab0e1566f
ar71xx: add profiles and build images for old PowerCloud System devices
...
[juhosg:
- use 'PowerCloud Systems' instead of 'PCS' in the profiles
- sort SingleProfile instances in image/Makefile]
Signed-off-by: Daniel Dickinson <daniel@powercloudsystems.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34195
2012-11-13 20:57:15 +00:00
62c8ff19ad
ar71xx: add profile and build image for the TL-WA7510N board
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34190
2012-11-13 14:48:03 +00:00
165b7d2173
ar71xx: user space support for the TL-WA7510N
...
[juhosg: separated from the http://patchwork.openwrt.org/patch/2820/ patch]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34188
2012-11-13 14:48:01 +00:00
91bab828aa
ar71xx: add support for TP-Link TL-WA7510N
...
It is mostly the same as TL-WA901N. WLAN and LAN
are working. LAN LED is working. WLAN signal
strength LEDs are not working yet.
http://wiki.openwrt.org/toh/tp-link/tl-wa7510n?s[]=wa7510n
[juhosg:
- cleanup commit message
- move non kernel related stuff into separate changes
- rename and refresh 615-MIPS-ath79-TL-WA7510N-v1-support patch
- merge WA7510N support into the mach-tl-wa901nd.c file
- add 3.6 support]
Signed-off-by: Stefan Helmert <helst_listen@aol.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34187
2012-11-13 14:48:00 +00:00
ce9d4fadfa
ar71xx: refresh patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34186
2012-11-13 14:47:58 +00:00
e92da5e7ae
ar71xx: nuke ath79_set_usb_power_gpio helper
...
It is no longer used.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34088
2012-11-05 13:23:28 +00:00
f2528b1792
ar71xx: use gpio_request_one instead of ath79_set_usb_power_gpio
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34087
2012-11-05 13:23:27 +00:00
ed35253f4c
ar71xx: don't use the unknown LED on the ZCN-1523-5 board
...
According to #12421 , GPIO 1 controls the power
output on the unused lines of the LAN2 port.
Remove the LED definition in order to prevent
possible permanent hardware damage.
If someone needs that, the power-out feature can
be controlled via the GPIO sysfs interface.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34076
2012-11-04 22:08:54 +00:00
1b744e1ca5
ar71xx: include mtd layout in the command line for ZCN-1523H-* boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34074
2012-11-04 21:12:20 +00:00
b78a736dc2
ar71xx: add missing Makefile entry for the ZCN-1523H-{2,5} boards
...
Also add the missing ATH79_MACH_ZCN_1523H_5 symbol.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 34072
2012-11-04 20:15:18 +00:00
7228a91a3b
ar71xx: fix link speed between AR7242 and AR8327 on the RB750GL/RB751G boards
...
The default pll_1000 value had to be changed
in order to make it working.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33993
2012-10-29 17:24:30 +00:00
e4db63fd64
ar71xx: add initial support for 3.6
...
The nand subtarget is not working yet.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33983
2012-10-28 19:52:02 +00:00
a6549ac1cb
ar71xx: remove NO_AUTOINCR flag from the NAND drivers
...
The flag is not present in 3.6.
Also add compatibility patches for 3.3.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33971
2012-10-28 12:21:15 +00:00
e2ec99889e
ar71xx: ag71xx: fix build_skb arguments for 3.6
...
Also add a compatibility patch for 3.3
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33969
2012-10-27 17:11:06 +00:00
3a86affcdd
ar71xx: enable sysupgrade for the CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33960
2012-10-27 08:55:42 +00:00
e99d557c08
ar71xx: add profile and build image for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33958
2012-10-27 08:55:40 +00:00
9287e0c863
ar71xx: add user-space part for the CAP4200AG
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33957
2012-10-27 08:55:39 +00:00
d54c9653e9
ar71xx: add support for the Senao CAP4200AG board
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33956
2012-10-27 08:55:38 +00:00
3b7cb4eb4a
ar71xx: add ath79_wmac_disable_[25]ghz helpers
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33955
2012-10-27 08:55:37 +00:00
269872fe1e
ar71xx: use mtd_read in wrt160nl_part
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33951
2012-10-27 07:57:58 +00:00
973eda6077
ar71xx: use mtd_read in tplinkpart
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33950
2012-10-27 07:57:57 +00:00
28f3adc2ed
ar71xx: generate 4,8,16M images for the WPE72
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33949
2012-10-27 07:57:55 +00:00
ff481a5518
ar71xx: reject TP-Link images containing a bootloader
...
The original TP-Link firmware images can be flashed via
the sysupgrade command, however those may contain a
bootloader. Flashing such an image via sysupgrade
bricks the board, and it can't be recovered without
a serial console.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33944
2012-10-26 18:58:13 +00:00
f1f388d527
ar71xx: rw2458n - fix flash parts
...
See #12338 . Redwave rw2458 has uboot, not redboot.
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33867
2012-10-19 18:32:49 +00:00
7a72f01a72
ar71xx: merge machine support patches
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33820
2012-10-17 18:27:50 +00:00
2e1bc1e15b
ar71xx: also use the ath79_set_ar934x_eth_cfg helper for DB120
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33819
2012-10-17 18:27:48 +00:00
31387947c8
ar71xx: use the ath79_set_ar934x_eth_cfg helper in machine setup routines
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33818
2012-10-17 18:27:47 +00:00
5ffc08e3dc
ar71xx: add a helper function for setting up ETH_CFG register on AR934x
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33817
2012-10-17 18:27:45 +00:00
35a91a4fe8
ar71xx: OM2P-HS sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33803
2012-10-17 08:26:05 +00:00
c5a32cfc92
ar71xx: add support for the OpenMesh OM2P-HS board
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33800
2012-10-17 08:26:01 +00:00
f1283d8583
ar71xx: fix sysupgrade for jjPlus JWAP003
...
[juhosg: change commit message]
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33769
2012-10-14 16:24:26 +00:00
1944f7b916
ar71xx: ew-dorin: added ethernet switch configuration
...
Signed-off-by: embedded wireless GmbH <info at embeddedwireless.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33768
2012-10-14 16:24:25 +00:00
62ab2b0da6
ar71xx: unbreak building images for OpenMesh OM2P/OM2P-LC
...
Commit r33248 introduced a regression by passing the board name plus
'board=' in the third argument. The board name string has to be put
into the image as identifier of the image type.
[juhosg: fix OpenMesh template instead of use of string substitution]
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 33767
2012-10-14 16:24:22 +00:00
befb648642
ar71xx: build image for the TL-WR841N/ND v8
...
SVN-Revision: 33623
2012-10-04 20:16:06 +00:00
02a85dfd85
ar71xx: user-space support for TL-WR841N/ND v8
...
SVN-Revision: 33622
2012-10-04 20:16:05 +00:00
196c6c5b45
ar71xx: add support for the TL-WR841N/ND v8 board
...
SVN-Revision: 33621
2012-10-04 20:16:03 +00:00
170cd7a19a
ar71xx: avoid possible NULL pointer dereference in ath79_init_{,local}_mac
...
SVN-Revision: 33575
2012-09-27 20:05:42 +00:00
ffc0ea6c5d
ar71xx: create 'fat' images for the DIR-825/TEW-673GRU boards
...
With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.
SVN-Revision: 33540
2012-09-25 12:57:41 +00:00
e7b1949d87
ar71xx: automatically find WLAN calibration data on TEW-673GRU
...
SVN-Revision: 33539
2012-09-25 12:57:40 +00:00
8ed8e51e74
ar71xx: automatically find WLAN calibration data on DIR-825-B1
...
SVN-Revision: 33538
2012-09-25 12:57:38 +00:00
e2504a977a
ar71xx: add missing backslash to uci-defaults/leds ( closes #12240 )
...
SVN-Revision: 33537
2012-09-25 12:49:43 +00:00
e70ad61e44
ar71xx: use different machtype and setup for the TL-MR3040
...
Should fix #12211 . Compile tested only.
SVN-Revision: 33535
2012-09-24 18:45:56 +00:00
79ffd1032a
ar71xx: fix a typo in TEW-637GRU image names
...
SVN-Revision: 33460
2012-09-18 14:32:25 +00:00
9a11f882d7
ar71xx: revert DIR-825-B1 wholeflash image support.
...
It should be implemmented in a cleaner way.
This reverts the following commits:
[ar71xx] dir-825-b1: Fix wholeflash images
[ar71xx] dir825b1: Add image for DIR-825-B1 that uses the whole flash"
SVN-Revision: 33459
2012-09-18 14:30:57 +00:00
a7c5c4390a
ar71xx: register the NAND flash controller device on DB120
...
SVN-Revision: 33455
2012-09-17 20:30:57 +00:00
7c85646176
ar71xx: ar934x_nfc: remove unused oob parameter of ar934x_nfc_send_read
...
SVN-Revision: 33454
2012-09-17 20:30:55 +00:00
3bdf0bc36f
ar71xx: ar934x_nfc: increase DMA retry count
...
SVN-Revision: 33453
2012-09-17 20:30:54 +00:00
b7cb43f6a6
ar71xx: ar934x_nfc: optimize READOOB operation on large page devices
...
SVN-Revision: 33452
2012-09-17 20:30:53 +00:00
96dde2e591
ar71xx: ar934x_nfc: fix RNDOUT operation
...
SVN-Revision: 33451
2012-09-17 20:30:51 +00:00
338b698fb6
ar71xx: ar934x_nfc: fix READ{0,1} operation on large page devices
...
SVN-Revision: 33450
2012-09-17 20:30:50 +00:00
0f254b4b67
dir-825-b1: Fix wholeflash images: Attempting to flash a wholeflash (-openwrt) image from the normal image would brick (but recoverable via emergency flash) the router if the wholeflash image was larger than the maximum size for a normal image. First we rename the -openwrt images to -wholeflash since -openwrt is really too generic. We also revert the changes to the regular dir-825-b1 image, which now is the same as before, but add a -towholeflash image which is almost the same as the regular dir-825-b1 image, but copies caldata to new location and allows flashing of images that use the full flash (except u-boot, u-boot-env, and caldata paritition space) (these are the -wholeflash images).
...
SVN-Revision: 33447
2012-09-17 14:17:12 +00:00
e8893fdf7a
ar71xx: add missing code for ar933x WMAC reset that was left out during the ar71xx->ath79 migration, should fix wifi stability issues on ar933x
...
SVN-Revision: 33446
2012-09-17 11:17:29 +00:00
ed14ffc7da
ar71xx: fix WP543 image builds
...
SVN-Revision: 33413
2012-09-15 10:21:21 +00:00
61dc6e65c0
ar71xx: merge machine support patches
...
SVN-Revision: 33389
2012-09-13 07:26:28 +00:00
5804b9d1b7
ar71xx: register the NAND controller device on the RB2011
...
SVN-Revision: 33388
2012-09-13 07:26:26 +00:00
4fd67c3cd4
ar71xx: add device registration code for the AR934x NAND flash controller
...
SVN-Revision: 33387
2012-09-13 07:26:25 +00:00
10cd35c0e7
ar71xx: package the AR934x NAND driver module
...
SVN-Revision: 33386
2012-09-13 07:26:23 +00:00
1e5fdbeae5
ar71xx: ar934x_nfc: experimental NAND Flash Controller driver for AR934x
...
SVN-Revision: 33385
2012-09-13 07:26:22 +00:00
40a5f5c16e
ar71xx: define NAND controller base address and register size for AR934X/QCA955x
...
SVN-Revision: 33382
2012-09-12 19:06:38 +00:00
4ee5b528de
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955x
...
SVN-Revision: 33362
2012-09-10 14:38:01 +00:00
2e0e38ad69
ar71xx: fix QCA955X_EHCI_SIZE
...
SVN-Revision: 33360
2012-09-10 14:32:54 +00:00
caa66bd150
fix description of nand/Ath5k profile ( #12149 )
...
SVN-Revision: 33352
2012-09-09 21:40:26 +00:00
aa2f4d4c8d
ar71xx: add initial support for RB2011UAS-2HnD
...
SVN-Revision: 33349
2012-09-09 14:05:32 +00:00
3686e18727
ar71xx: use routerboot_find_tag to find wlan data offset on RB751
...
SVN-Revision: 33348
2012-09-09 14:05:30 +00:00
ccabe4a1b4
ar71xx: add RouterBoot related helper routines
...
SVN-Revision: 33347
2012-09-09 14:05:28 +00:00
44bf7c7cc1
ar71xx: define MTD partitions for RB2011
...
SVN-Revision: 33345
2012-09-09 14:05:24 +00:00
6ae5ec16e0
ar71xx: add preliminary support for Mikrotik RB2011L
...
This patch adds preliminary support for the Mikrotik RB2011L.
The NAND flash is not yet supported, so only the initramfs
kernel can be used for now.
[juhosg: remove unnecessary PCI/USB related stuff, the board
does not use that, update commit message]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
SVN-Revision: 33344
2012-09-09 14:05:22 +00:00
94bac7366c
ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934x
...
SVN-Revision: 33343
2012-09-09 14:05:20 +00:00
7592057774
ar71xx: add dynamic MDIO clock calculation
...
SVN-Revision: 33342
2012-09-09 14:05:17 +00:00
88a5478781
ar71xx: use the RLE library for RB751
...
SVN-Revision: 33338
2012-09-08 17:51:56 +00:00
73df240bb3
ar71xx: add library code for RLE decoding
...
It will be used for the MikroTik boards.
SVN-Revision: 33337
2012-09-08 17:51:54 +00:00
f4be8a76de
ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934x
...
SVN-Revision: 33335
2012-09-08 13:39:09 +00:00
70d00ac64e
ar71xx: refresh kernel patches
...
SVN-Revision: 33334
2012-09-08 13:39:04 +00:00
c3b7139ab2
dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware.
...
SVN-Revision: 33326
2012-09-06 18:15:26 +00:00
069f544d2b
ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934x
...
SVN-Revision: 33318
2012-09-05 19:26:50 +00:00
81bb246a8d
ar71xx: add rssileds to package set in profile for devices which got them.
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33317
2012-09-05 19:22:51 +00:00
11c3392b7f
Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"
...
That was based on assumptions.
SVN-Revision: 33310
2012-08-29 10:37:55 +00:00
eb9a97a360
ar71xx: all0315n: fix ethernet according to vendor info
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33309
2012-08-29 10:37:54 +00:00
02cb5f9dcd
ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/leds
...
SVN-Revision: 33308
2012-08-29 10:37:53 +00:00
0c5688cc38
ar71xx: image: fix Profile name for TL-WA701 ( closes #12094 )
...
SVN-Revision: 33295
2012-08-29 10:37:30 +00:00
5fdbb33db4
ar71xx: Buffalo WZR-HP-AG300H LED support
...
An improved LED support for Buffalo WZR-HP-AG300H.
There will be two new packages to go with this patch
(ar922x-led-fix-hotplug and ar922x-led-fix-init).
These packages essentially perform the same task of
disabling "JTAG over GPIO pins" function which is
currently required for LEDs on AR922x emac GPIO to work,
and are both considered a temporary fix that circumvent
this problem.
[juhosg: add the hotplug script from the proposed
ar922x-led-fix-hotplug package to ar71xx/base-files]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 33294
2012-08-29 10:11:55 +00:00
f2030c3113
ar71xx: add profile for Allnet devices
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33287
2012-08-27 14:55:38 +00:00
d65c06c15c
ar71xx: generate image for ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33286
2012-08-27 14:55:37 +00:00
4079f3163f
ar71xx: sysupgrade for the ALL0315N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33285
2012-08-27 14:55:36 +00:00
abffa4ecfb
ar71xx: rename all0258n.sh to allnet.sh
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33284
2012-08-27 14:55:35 +00:00
1d96b0275c
ar71xx: detect ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33282
2012-08-27 14:55:32 +00:00
eebdd633e4
ar71xx: add support for the Allnet ALL0315N board
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33281
2012-08-27 14:55:31 +00:00
cca873e8e0
ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33280
2012-08-27 14:55:26 +00:00
5a9c7fda3e
ar71xx: unbreak building images for TL-WR1041N-v2, TL-WR2543N
...
Commit 48788063266ad99bdab03b53cbe7e1a564c2d9b3 (r33251) introduced a
regression with board= kernel command line parameter incorrectly
initialised.
The faulty builds propogated to the snapshots download area. This makes
the device unbootable and TP-Link users have to attach the serial to
recover.
Here is the q&d way i used to identify MIPS boards that didn't have a
corresponding entry in the image/Makefile:
for i in `find ../files/arch/mips/ath79/ -type f -exec cat {} \; \
| sed -n '/MIPS_MACHINE/ { s/^[^"]*"\([^"]*\)".*$/\1/; p; }'`; do
grep -q ,$i, Makefile || echo $i;
done > missing-boards.new
Reported-by: Casper on IRC
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33274
2012-08-26 08:15:11 +00:00
f3d5edffdc
ar71xx: image: fix TL-WR1043ND board id ( #12079 )
...
SVN-Revision: 33272
2012-08-26 06:30:37 +00:00
773b33d7d2
ar71xx: image: group and sort {Single,Multi}Profiles
...
SVN-Revision: 33264
2012-08-23 13:17:47 +00:00
a5e0eb0d95
ar71xx: image: group and sort mtdlayout definitions
...
SVN-Revision: 33263
2012-08-23 13:14:35 +00:00
f0ad972aba
ar71xx: image: use the MultiProfile helper for the Madwifi profile
...
SVN-Revision: 33262
2012-08-23 13:11:25 +00:00
333f030b79
ar71xx: image: automatically build a list of SingleProfiles
...
Use that for Default/Minimal profiles.
SVN-Revision: 33261
2012-08-23 13:08:15 +00:00
5dce77837f
ar71xx: image: use the new helpers for the ZyXEL images
...
SVN-Revision: 33260
2012-08-23 13:05:05 +00:00
be4be2d82a
ar71xx: image: use the new helpers for the Zcomax images
...
SVN-Revision: 33259
2012-08-23 13:01:55 +00:00
74bdb68ea4
ar71xx: image: use the new helpers for the WRT400 images
...
SVN-Revision: 33258
2012-08-23 12:58:45 +00:00
8cf9a7b1c7
ar71xx: image: use the new helpers for the WZRHPG30XNH images
...
SVN-Revision: 33257
2012-08-23 12:55:35 +00:00
c965d8ead8
ar71xx: image: use the new helpers for the WHRHPG300N images
...
SVN-Revision: 33256
2012-08-23 12:52:25 +00:00
71af43a7c7
ar71xx: image: use the new helpers for the UBNTXM images
...
SVN-Revision: 33255
2012-08-23 12:49:15 +00:00
097e9938b4
ar71xx: image: use the new helpers for the UBNT images
...
SVN-Revision: 33254
2012-08-23 12:46:06 +00:00
216e9b7a92
ar71xx: image: use the new helpers for the TPLINKOLD images
...
SVN-Revision: 33253
2012-08-23 12:42:56 +00:00
48d6081fa5
ar71xx: image: use the new helpers for the TPLINK-LZMA images
...
SVN-Revision: 33252
2012-08-23 12:39:46 +00:00
8546e00157
ar71xx: image: use the new helpers for the TPLINK images
...
SVN-Revision: 33251
2012-08-23 12:36:35 +00:00
27feea1070
ar71xx: image: use the new helpers for the Planex images
...
SVN-Revision: 33250
2012-08-23 12:33:25 +00:00
4dbabe5c21
ar71xx: image: use the new helpers for the PB4X images
...
SVN-Revision: 33249
2012-08-23 12:30:15 +00:00
bbaa0b9200
ar71xx: image: use the new helpers for the OpenMesh images
...
SVN-Revision: 33248
2012-08-23 12:27:06 +00:00
4edc55f475
ar71xx: image: use the new helpers for the Netgear images
...
SVN-Revision: 33247
2012-08-23 12:23:56 +00:00
d9f933b8b8
ar71xx: image: use the new helpers for the MyLoader images
...
SVN-Revision: 33246
2012-08-23 12:20:46 +00:00
a409d0cf46
ar71xx: image: use the new helpers for the DIR825B1 images
...
SVN-Revision: 33245
2012-08-23 12:17:36 +00:00
b7e05e3a59
ar71xx: image: use the new helpers for the CyberTAN images
...
SVN-Revision: 33244
2012-08-23 12:14:26 +00:00
292f074ad7
ar71xx: image: use the new helpers for the Cameo933x images
...
SVN-Revision: 33243
2012-08-23 12:11:17 +00:00
4c9a428614
ar71xx: image: use the new helpers for the Cameo913x images
...
SVN-Revision: 33242
2012-08-23 12:08:07 +00:00
19d840980f
ar71xx: image: use the new helpers for the Cameo7240 images
...
SVN-Revision: 33241
2012-08-23 12:04:57 +00:00
ce91228e2b
ar71xx: image: use the new helpers for the AthGzip images
...
SVN-Revision: 33240
2012-08-23 12:01:47 +00:00
70e3dda99c
ar71xx: image: use the new helpers for the AthLzma images
...
SVN-Revision: 33239
2012-08-23 11:58:37 +00:00
31a88650d7
ar71xx: image: use the new helpers for the ALFA images
...
SVN-Revision: 33238
2012-08-23 11:55:27 +00:00
2379e6f2a3
ar71xx: image: add a few helper functions
...
These functions will be used to simplify the Makefile.
SVN-Revision: 33237
2012-08-23 11:52:18 +00:00
6ebc77af73
ar71xx: image: pass mtdlayout as a separate parameter for the ALFA template
...
SVN-Revision: 33236
2012-08-23 11:49:07 +00:00
a2f82cf7ec
ar71xx: add profile and build image for the TEW-712BR
...
SVN-Revision: 33234
2012-08-22 20:18:44 +00:00
8744f8d183
ar71xx: TEW-712BR user space support
...
SVN-Revision: 33232
2012-08-22 20:12:24 +00:00
8b3d95bba9
ar71xx: add support for the TRENDnet TEW-712BR board
...
SVN-Revision: 33231
2012-08-22 20:09:13 +00:00
4073317695
ar71xx: fix serial clock calculation on AR933x
...
Closes #12031 .
SVN-Revision: 33230
2012-08-22 19:11:10 +00:00
2811d6c183
ar71xx: fix comment style in mach-tl-wr2543n.c
...
SVN-Revision: 33227
2012-08-22 12:42:59 +00:00
dc13dc1d54
ar71xx: fix mtd layout of the AP113
...
The 'mtdparts=' prefix and the name of the flash device is missing.
SVN-Revision: 33226
2012-08-22 12:39:46 +00:00
5a694e09c8
ar71xx: add ALL0305 board alias
...
For the pure convenience of having a correctly named
image and system name in /proc/cpuinfo , until we can
do that by having system names in DTS...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33224
2012-08-22 12:33:22 +00:00
0517183b9c
ar71xx: add support for TP-Link TL-WDR3600
...
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 33219
2012-08-22 09:43:18 +00:00
968ac3fd03
add led defintion for the WR2543 5GHz WLAN LED
...
Signed-off-by: Andy Leiserson <andy@leiserson.org>
SVN-Revision: 33215
2012-08-22 09:10:24 +00:00
182a18a369
ar71xx: setup WLAN LED for the TL-WA901ND v2
...
Closes #11889 .
SVN-Revision: 33202
2012-08-16 07:11:30 +00:00
5fc4b7f5fd
ar71xx: uci-defaults/leds for ALL0258N
...
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33165
2012-08-13 14:01:38 +00:00
e320a7e649
ar71xx: simplify misc IRQ handling
...
SVN-Revision: 32948
2012-08-02 11:25:49 +00:00
3e1e52a524
ar71xx: fix AR934X_EHCI_SIZE
...
SVN-Revision: 32947
2012-08-02 11:25:46 +00:00
b873051706
ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND
...
SVN-Revision: 32946
2012-08-02 09:54:41 +00:00
e29d6bec6f
ar71xx: image: allow to use board specific code in the lzma-loader
...
SVN-Revision: 32945
2012-08-02 09:54:33 +00:00
79a8660d67
ar71xx: init switch hw_reset on the TL-WR1043ND board
...
SVN-Revision: 32944
2012-08-02 09:54:28 +00:00
563400ef10
ar71xx: ew-dorin: added router firmware generation
...
[juhosg: remove dead code]
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
SVN-Revision: 32934
2012-08-01 12:24:57 +00:00
8eabe64e6b
ar71xx: ew-dorin: added USB support
...
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>
SVN-Revision: 32933
2012-08-01 12:24:56 +00:00
1af4fd7660
ar71xx: Buffalo WLAE-AG300N wireless led patch
...
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32932
2012-08-01 12:24:54 +00:00
010aec0619
ar71xx: Buffalo WLAE-AG300N initial support
...
The patch set for Buffalo WLAE-AG300N initial support.
There is another patch for wireless led support that
is posted separately.
Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.
[juhosg: fix coding style]
Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>
SVN-Revision: 32931
2012-08-01 12:24:52 +00:00
87a72d68f1
fix typo in modules.mk
...
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.
Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>
SVN-Revision: 32870
2012-07-25 19:52:30 +00:00
accbc20045
move watchdog driver to target specific modules.mk
...
SVN-Revision: 32854
2012-07-25 15:50:10 +00:00
23ffbad602
move target specific spi modules
...
SVN-Revision: 32853
2012-07-25 15:50:04 +00:00
1859500829
move target specific leds modules to ar71xx modules.mk
...
SVN-Revision: 32852
2012-07-25 15:50:02 +00:00
21de1b9d85
ar71xx: enable I2C_GPIO, the PB44 board needs that
...
SVN-Revision: 32738
2012-07-15 17:52:52 +00:00
7daf851adf
ar71xx: fix PB44 board detection
...
SVN-Revision: 32737
2012-07-15 17:52:50 +00:00
c7fa38484c
ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi
...
SVN-Revision: 32736
2012-07-15 17:52:48 +00:00
33220828dc
ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0
...
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:
TL-WDR4300:
00000040 43 00 00 01 00 00 00 01 00 00 00 00 76 fb 83 40 |C...........v..@|
TL-WDR4310:
00000040 43 10 00 01 00 00 00 01 00 00 00 00 38 2b 50 6c |C...........8+Pl|
[juhosg: change commit message, use a different model name]
Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
SVN-Revision: 32683
2012-07-12 13:38:40 +00:00
d3c8852fd1
ar71xx: select ATH79_DEV_M25P80 for the WRT400N board
...
SVN-Revision: 32679
2012-07-12 08:34:22 +00:00
c75c895d24
ar71xx: airrouter power led support
...
This patch adds support for power led to Unifi Airrouter AP.
[juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]
Signed-off-by: Rocco Folino <lordzen@autistici.org>
SVN-Revision: 32678
2012-07-12 08:34:21 +00:00
466f010303
ar71xx: unifi reset button support
...
This patch adds support for reset button to Ubiquiti UniFi AP.
[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]
Signed-off-by: Rocco Folino <lordzen@autistici.org>
SVN-Revision: 32677
2012-07-12 08:34:20 +00:00
5ce9c90ca8
ar71xx: airrouter reset button support
...
This patch adds support for reset button to Ubiquiti Airrouter AP.
[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]
Signed-off-by: Rocco Folino <lordzen@autistici.org>
SVN-Revision: 32676
2012-07-12 08:34:18 +00:00
fe015f399f
ar71xx: swizzle address for PCI byte/word access on AR71xx
...
Closes #11683 .
SVN-Revision: 32639
2012-07-06 16:33:12 +00:00
b39df5bb81
ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board
...
SVN-Revision: 32638
2012-07-06 11:12:02 +00:00
e258367c19
ar71xx: merge new board patches into the generic patch
...
SVN-Revision: 32637
2012-07-06 11:12:01 +00:00
b020a7e7c3
ar71xx: OM2P LC sysupgrade patch
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
SVN-Revision: 32635
2012-07-06 11:11:58 +00:00
eabf96dc22
ar71xx: set firmware version for the TL-WR2543N
...
This ensures that the resulting firmware can
be flashed from the latest (v3.13.17) offical
firmware.
SVN-Revision: 32617
2012-07-05 16:25:31 +00:00
7c932579fa
ar71xx: make 2.4GHz wlan LED work on the WR2543N
...
Because ath9k does not supports separate LEDs for
different bands yet, the 2.4GHz LED will show the
activity, even if the 5GHz band is selected.
SVN-Revision: 32615
2012-07-05 16:25:26 +00:00
b2f0476871
ar71xx: OM2P sysupgrade support
...
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
SVN-Revision: 32613
2012-07-05 08:26:57 +00:00
797944d3f1
ar71xx: add support for the OpenMesh OM2P-LC board
...
Patch-by: Marek Linder <marek@open-mesh.com>
SVN-Revision: 32611
2012-07-05 08:26:53 +00:00
1ea2a3cfd8
ar71xx: add profile and build image for the Atheros AP136 reference board
...
SVN-Revision: 32609
2012-07-05 08:26:51 +00:00
Felix Fietkau
Gabor Juhos
Mirko Vogt
Daniel Dickinson
Jo-Philipp Wich
John Crispin
Florian Fainelli