Commit Graph

30752 Commits (40d25d3eb5bd69d9c7bd559ea1189978e17ac897)

Author SHA1 Message Date
Felix Fietkau b011293d0b kernel: replace GRO optimization patch with a new one that supports VLANs/bridges with different MAC addresses
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44877
2015-03-18 18:22:41 +00:00
Felix Fietkau 17afb853ee kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4
also refresh generic patches for 3.14, 3.18, 3.19 and 4.0
targets might need a minor refresh as well, however, it looks
like everything still applies cleanly with occasional small
offsets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 44876
2015-03-18 18:21:08 +00:00
Jonas Gorski 87568ebeac b53: reverse duplex bit meaning for IMP state override register
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44875
2015-03-18 10:44:15 +00:00
Felix Fietkau f30358d41a kernel: remove the netfilter optimization that skips the filter table, it has caused too many issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44873
2015-03-17 17:14:48 +00:00
Felix Fietkau 2e5125c3d6 mac80211: add some improvements to the software queueing code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44872
2015-03-17 17:14:43 +00:00
Felix Fietkau a80c80580c toolchain/kernel-headers: remove an obsolete patch directory
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44871
2015-03-17 11:16:45 +00:00
Felix Fietkau 7502d65294 tools: remove leftover dependency line
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44870
2015-03-17 10:11:04 +00:00
Felix Fietkau e9dd838d86 tools: remove a bunch of unused automake macros
The feeds that use them have been unmaintained for a long time, and
something similar can easily be added as a regular host build package.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44869
2015-03-17 10:11:00 +00:00
John Crispin 553528371b ralink: fix mt7621 i2c name
Signed-off-by: zouxf <fl.service@t-firefly.com>

SVN-Revision: 44868
2015-03-17 09:44:14 +00:00
John Crispin 29cf72ac07 lantiq/xrx200: cleanup default packages
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44867
2015-03-17 09:44:06 +00:00
John Crispin 55a71c1374 ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44866
2015-03-17 09:43:56 +00:00
John Crispin 37a4102423 package/uboot-envtools: add OpenMesh OM5P-AN support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44865
2015-03-17 09:43:52 +00:00
John Crispin 17564eeaaa package/om-watchdog: add OpenMesh OM5P-AN support
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44864
2015-03-17 09:43:47 +00:00
John Crispin 10c5a44017 ar71xx: enable sysupgrade for the OpenMesh OM5P-AN
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44863
2015-03-17 09:43:37 +00:00
John Crispin 85cceb5dd0 ar71xx: add user-space support for the OpenMesh OM5P-AN
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44862
2015-03-17 09:43:31 +00:00
John Crispin 17a1e18ee2 ar71xx: add kernel support for the OpenMesh OM5P-AN board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44861
2015-03-17 09:43:19 +00:00
John Crispin 2a0fcc029f ar71xx: detect GL.iNet model
There are two versions of the GL.iNet, the 6408A and the 6416A. The only
difference is the flash size.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44860
2015-03-17 09:43:13 +00:00
John Crispin 29c3611294 igmpproxy: Multiple downlink interfaces fix.
from Erik Tews <erik@datenzone.de>

This patch has two effects. First, the quickleave feature/behaviour is
disabled for all groups that are used on more than one interface. The
idea of quickleave is to leave a group fast and later figure out whether
there is still somebody interested in that group. For groups used on
more than one interface, it is already known that there is still
somebody interested in that group.

Second, when a leave is received for a group that is used on more than
one interface, igmpproxy sends queries on all interface to discover
remeining listeners for that group. Previously these queries were only
send on the interface the leave was received on, so that listeners on
the other interfaces were not discovered and the group might be left on
the upstream router incorrectly.

This patch can be improved by sending the queries only on the interface
the leave was received on and adapting the algorithm in
internAgeRoute(...) in rttable.c in a way that only one interface is
actually processed and all other interfaces of the route are silently
assumed to be still active.

Signed-off-by: Erik Tews <erik@datenzone.de>

SVN-Revision: 44859
2015-03-17 09:43:07 +00:00
John Crispin 0a0cca5fdb ltq-hcd: remove ar10 and vr9 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44858
2015-03-17 09:43:01 +00:00
John Crispin 986af9e64e lantiq: make xrx200 targets use the upstream dwc2 driver
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44857
2015-03-17 09:42:56 +00:00
Felix Fietkau caf94290ce kernel: add a few more missing config symbols
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44856
2015-03-17 07:24:51 +00:00
Rafał Miłecki 76811de003 brcm47xx: support SPROM/NVRAM prefixes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44855
2015-03-17 07:07:17 +00:00
Rafał Miłecki 917fb76321 brcm47xx: rename (and refresh) MTD patch for safety "nvram" partition
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44854
2015-03-17 07:07:00 +00:00
Rafał Miłecki 8f63c1405f brcm47xx: switch to 3.18
Tested on BCM5357B0, BCM47186B0 and BCM4706.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44853
2015-03-16 23:05:43 +00:00
Rafał Miłecki 7c6f7b716b bcm53xx: switch to 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 44852
2015-03-16 22:24:56 +00:00
Felix Fietkau 768cf6821f x86: refresh kvm_guest kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44851
2015-03-16 21:17:45 +00:00
Felix Fietkau 06cb90f8a2 kernel: add missing config symbol
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44850
2015-03-16 21:17:41 +00:00
Felix Fietkau 6c42f140a0 x86: enable rtl8139 ethernet support for geode by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44849
2015-03-16 21:00:14 +00:00
Florian Fainelli 1488ed7c2c brcm63xx: switch maintainer
Make Jonas the maintainer of brcm63xx.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 44848
2015-03-16 19:51:17 +00:00
Felix Fietkau 2777b525c6 geode: set target to Geode GX1 to support older chips
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44847
2015-03-16 18:10:17 +00:00
Jonas Gorski 343ec8d645 brcm63xx: use consistent gpio chip labeling for OF/non-OF
Ensure gpio chips are always labeled the same; this allows simplifying
any arch setup gpio lookups.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44846
2015-03-16 13:37:38 +00:00
Felix Fietkau e1a8e41287 ltq-adsl-mei: fix bugs in linux 3.18 compatiblity change
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44845
2015-03-16 13:05:49 +00:00
Felix Fietkau 6cfad3ca21 ltq-adsl: fix bugs in linux 3.18 compatiblity change
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44844
2015-03-16 13:05:42 +00:00
Nicolas Thill 81ff0511df packages: more (e)glibc fixes after r44701
_GNU_SOURCE has been declared "deprecated" in favor of _DEFAULT_SOURCE in glibc

Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44843
2015-03-16 12:32:22 +00:00
Nicolas Thill 4b382a440b packages: some (e)glibc fixes after r44701
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 44842
2015-03-16 12:25:06 +00:00
Jonas Gorski 81e51681e7 brcm63xx: switch to 3.18
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44841
2015-03-16 11:53:22 +00:00
Jonas Gorski 5d0e2d1b41 brcm63xx: call brcm63xx_detect explicitly
Now that we have converted all users of global variables to use
brcm63xx_board_name, we can savely convert the implicit call to detect
in brcm63xx.sh to a single, explicit call in preinit.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44840
2015-03-16 11:53:14 +00:00
Jonas Gorski 020e5733f9 brcm63xx: move preinit ifname detection to the preinit script
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44839
2015-03-16 11:53:06 +00:00
Jonas Gorski 90da308e3b brcm63xx: remove obsolete brcm63xx_has_reset_button
r37000 made button kmods loaded from generic code, so we don't use
it anymore for deciding to load them.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44838
2015-03-16 11:52:57 +00:00
Jonas Gorski f0badcb769 brcm63xx: set status leds from within diag.sh
Instead of setting them up on invocation of brcm63xx_detect, set them
when calling diag.sh based.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44837
2015-03-16 11:52:49 +00:00
Jonas Gorski 098377af25 brcm63xx: switch to board_name based configuration
Board IDs are not unique, so in preparation for depricating them, always
use board_name for any (default) configuration decisions.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44836
2015-03-16 11:52:42 +00:00
Jonas Gorski 52ffc6faa7 brcm63xx: add missing board_ids to legacy_detect
These boards do not have a corresponding dts file yet.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44835
2015-03-16 11:52:35 +00:00
Jonas Gorski 906c9ef952 brcm63xx: add device tree based board detection
Use the device tree model property for detecting the board instead
of board id from nvram if present.

Since we can now directly detect the DVA-G3810BN, we can remove the
extra check for it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44834
2015-03-16 11:52:26 +00:00
Jonas Gorski 844e92e188 brcm63xx: populate /tmp/sysinfo
Take full board name from devicetree, if present. Provide a method
for retrieving the board name.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44833
2015-03-16 11:52:20 +00:00
Jonas Gorski 9c53e344c0 brcm63xx: base-files: rename board_name to board_id
Rename board_name to board_id to prepare for using board_name as a
proper name for the board.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44832
2015-03-16 11:52:16 +00:00
Jonas Gorski ca7f6d28c8 brcm63xx: Add DGND3700 v1 / DGND3800B support
This adds support for the Netgear DGND3700 v1 and DGND3800B.

DGND3700 v1 and DGND3800B are exactly the same router, only one difference,
the factory firmware. This patch produces two factory firmwares for each router.

The router includes an onboard NAND flash for extra storage. NAND is currently
not supported in bcm63xx, so no code added for this part. The NOR flash (32MB)
is enough for storing an openwrt firmware.

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
[jogo: Add back commit message from v1]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44831
2015-03-16 11:52:10 +00:00
Jonas Gorski 9dc137397f buildroot: make it easier to build all kmods
Split out kmods from ALL to make it easier to create local builds that
are compatible kmod-wise with releases.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44830
2015-03-16 11:51:54 +00:00
John Crispin 4fdb66373f netlogic: bump to 3.18
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44829
2015-03-16 10:58:43 +00:00
Felix Fietkau 298d67ec7b mvebu: drop linux 3.14 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 44828
2015-03-16 08:29:42 +00:00
John Crispin d6b3eba475 kernel: add missing MTD_SPLIT_FIT_FW symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44827
2015-03-16 08:05:42 +00:00