Commit Graph

38 Commits (4076d12f41e7fd338e9140c1f431002f4ffaf953)

Author SHA1 Message Date
Imre Kaloz 4707123fca mvebu: fixup wifi macs for Linksys boards
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47820
2015-12-10 12:13:16 +00:00
Jo-Philipp Wich 08848936dd all: remove redundant board.d/00_model files
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
2015-12-04 11:07:06 +00:00
Jo-Philipp Wich 527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich 9b02e73188 board.d: merge ucidef_add_switch() and ucidef_add_switch_ports()
This changes uci-defaults-new.sh, config_generate and all relevant board.d
files in order combine ucidef_add_switch() and ucidef_add_switch_ports() into
a single function.

Also removes now superfluous enable and reset arguments.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47721
2015-12-03 17:30:24 +00:00
Jo-Philipp Wich fff1a82180 mvebu: switch network and led config defaults to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47674
2015-11-30 10:43:31 +00:00
Jo-Philipp Wich fc64fd8712 Revert "mvebu: migrate led and network setup to board detection framework"
Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47597
2015-11-22 20:52:10 +00:00
Jo-Philipp Wich e20b689249 mvebu: migrate led and network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47541
2015-11-20 23:59:31 +00:00
Imre Kaloz 8bb23cfb66 mvebu: add support for the Linksys WRT1900ACS (Shelby)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 47164
2015-10-08 10:01:30 +00:00
Imre Kaloz 87a70e0774 This had been set in r44508 as a workaround for switch problems.
Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.

This is the Linksys firmware's default behavior.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46700
2015-08-21 08:10:48 +00:00
Imre Kaloz 20fac016e4 mvebu: add support for the Linksys boot counter
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
2015-08-19 08:31:23 +00:00
Imre Kaloz 9fb062cf93 mvebu: make flashing more safe
Turn on the auto recovery feature when flashing
and turn it off on successful bootup.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45792
2015-05-27 19:03:22 +00:00
Luka Perkov 76330e9b57 mvebu: better integrate xp-gp
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45459
2015-04-16 13:53:57 +00:00
Imre Kaloz 2705cda813 mvebu: add support for the Linksys Caiman and Cobra
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45456
2015-04-16 09:54:39 +00:00
Luka Perkov a046ce235f mvebu: better integrate 385-ap-db
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45452
2015-04-15 16:23:10 +00:00
Imre Kaloz b0ad24f0d5 mvebu: migrate mamba support to the upstreamed code
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45400
2015-04-12 17:29:50 +00:00
Imre Kaloz 6f01238398 mvebu: handle other SKUs as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45396
2015-04-12 15:04:14 +00:00
Imre Kaloz a62fa2d365 mvebu: reformat the damaged syscfg partition on the mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45386
2015-04-12 08:35:33 +00:00
Imre Kaloz b9c4dadc11 mvebu: deal with the new path in the fan control script for Linux 4.0+
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 45195
2015-03-31 19:12:27 +00:00
Imre Kaloz b95a9f01c1 mvebu: set default regdomain
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44908
2015-03-20 12:15:40 +00:00
Imre Kaloz e02478a22a mvebu: set default WRT1900AC switch config
This sets 'enable_vlan' and thus uses 802.1q
VLANs, but without tagging on either interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44509
2015-02-23 10:35:29 +00:00
Imre Kaloz 0de48a0dd8 mvebu: set WRT1900AC WAN interface MAC address
Toggles the LA bit on the WAN interface.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44508
2015-02-23 10:33:19 +00:00
Luka Perkov 81db848656 targets: base-files: diag.sh does not need to be executable
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44305
2015-02-07 19:58:58 +00:00
Luka Perkov 92e6e80080 targets: files in uci-defaults do not need to be executables
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44304
2015-02-07 19:58:52 +00:00
Imre Kaloz 7be967e954 mvebu: temporary el cheapo' fan control script
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 44153
2015-01-26 20:41:43 +00:00
Imre Kaloz 8a103d5c56 mvebu: fixups for the new driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43978
2015-01-16 08:44:15 +00:00
John Crispin 019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
Imre Kaloz 6f5a9debed handle sysupgrade tar files on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41647
2014-07-14 15:00:36 +00:00
Imre Kaloz 81d85a717a add sysupgrade support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41630
2014-07-13 22:12:56 +00:00
Imre Kaloz 811d1682b8 enable handling of the wan led on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41555
2014-07-10 10:19:06 +00:00
Imre Kaloz b7b222279c set led triggers for the Linksys WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41436
2014-07-01 09:45:41 +00:00
Imre Kaloz 9ff59c7656 drop unneeded file
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41433
2014-07-01 09:35:22 +00:00
Imre Kaloz d59f68531b use the power led on the WRT1900AC for status reporting
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41383
2014-06-29 12:53:09 +00:00
Imre Kaloz 2c06f05236 fixup mac addresses on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41382
2014-06-29 12:51:39 +00:00
Imre Kaloz f953ed4ffb automatically generate network config
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41381
2014-06-29 12:50:12 +00:00
Luka Perkov cb3d5242ca mvebu: drop preinit script
The /lib/mvebu.sh script can now handle this task.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41341
2014-06-26 10:21:32 +00:00
Imre Kaloz f11de38d44 make script executable, add WRT1900AC detection
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41291
2014-06-20 22:35:09 +00:00
Luka Perkov 26e8e630ef mvebu: add support for the Armada XP GP board (DB-MV784MP-GP)
This Armada XP GP board from Marvell comes with:

* 2GB DDR3 DIMM
* 1GB NAND flash (8-bit interface)
* 16MB NOR flash (16-bot interrface)
* 16MB SPI flash
* SDIO module
* 3 PCIe
* 1 SATA link
* 2 USB EHCI
* 1 internal SSD
* 4 Ethernet Gigabit
* 1 RS232 port over USB

Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com>

SVN-Revision: 39568
2014-02-11 02:07:47 +00:00
Florian Fainelli a286a55c6f mvebu: add board detection scripts
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35208
2013-01-17 22:28:48 +00:00