0d4286b0b3
This patch is for broadcom 96348GW-11 boards, to get USB and Ethernet working. Also it patches mtd map driver for bcm96xx boards to be sure that CFE1CFE1 code is detected when booting from CFE. ( #4201 )
...
SVN-Revision: 13213
2008-11-15 11:30:22 +00:00
cb126cd576
Package bcm63xx-pcmcia kernel module and fix compilation
...
SVN-Revision: 13212
2008-11-15 11:26:23 +00:00
9bbc37d26b
Remove old kernel configuration files
...
SVN-Revision: 13211
2008-11-15 11:23:29 +00:00
517e3d404c
Delete old brcm63xx files
...
SVN-Revision: 13210
2008-11-15 11:21:42 +00:00
88cda758c3
update to 2.6.25.20, 2.6.26.8, 2.6.27.5 and refresh patches * based on a patch by Hauke Mehrtens * closes #4193
...
SVN-Revision: 13192
2008-11-12 17:49:01 +00:00
0a11abc83d
add missing kconfig symbols for 2.6.27 targets when all modules are enabled
...
SVN-Revision: 13178
2008-11-11 02:43:35 +00:00
d0388bbe5c
brcm63xx: rename mtd partitions to the ones used by other openwrt platforms - should make the automatic rootfs overlay split work and fix the mounting of the right partition
...
SVN-Revision: 13130
2008-11-06 12:52:39 +00:00
7cedaafd0c
Add basic support for Inventel Liveboxes, resync kernel config
...
SVN-Revision: 13108
2008-11-03 20:30:43 +00:00
9aa1d64b91
Using CONFIG_MODVERSIONS is a bad idea, disable it and no longer mark brcm63xx as broken
...
SVN-Revision: 13106
2008-11-03 18:52:58 +00:00
aa90a702db
Use 2.6.27.4 kernel version
...
SVN-Revision: 13055
2008-10-28 11:19:24 +00:00
30d2200e7d
Update targets to 2.6.27.3
...
SVN-Revision: 13035
2008-10-23 09:11:10 +00:00
28baca91fe
Update patches and rename board 9 stands for development board
...
SVN-Revision: 13024
2008-10-22 09:20:51 +00:00
691e187381
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices
...
SVN-Revision: 13015
2008-10-20 12:55:28 +00:00
64c28032c8
New Broadcom BCM63xx codebase, huge thanks to Maxime ;)
...
SVN-Revision: 13001
2008-10-17 22:53:56 +00:00
5718709711
Fix reference to the old and replaced kmod-rt61
...
SVN-Revision: 12723
2008-09-27 10:47:00 +00:00
821170133f
update to 2.6.26.5 and 2.6.25.17
...
SVN-Revision: 12718
2008-09-26 18:46:53 +00:00
3029c2fd53
disable CONFIG_USB_SUPPORT in generic config for 2.6.25 & 2.6.26 and enable it on targets where USB is supported
...
SVN-Revision: 12690
2008-09-24 19:28:53 +00:00
184c6b06f2
update to 2.6.26.3 and 2.6.25.16
...
SVN-Revision: 12371
2008-08-22 15:37:19 +00:00
e5fa05d788
update to 2.6.25.15 and 2.6.26.2
...
SVN-Revision: 12242
2008-08-07 16:52:52 +00:00
104b3386a2
update to 2.6.25.12
...
SVN-Revision: 11933
2008-07-26 10:53:23 +00:00
492ba57b56
update targets to 2.6.25.10
...
SVN-Revision: 11667
2008-07-05 16:52:15 +00:00
dee39d10ee
upgrade to 2.6.25.9
...
SVN-Revision: 11584
2008-06-26 14:28:16 +00:00
4af6ac74fb
upgrade to 2.6.25.7, and refresh patches
...
SVN-Revision: 11523
2008-06-17 12:57:04 +00:00
2eb6751084
upgrade to 2.6.25.6
...
SVN-Revision: 11435
2008-06-11 11:38:39 +00:00
6e0427c8a4
Add bcm3350 cpuid
...
SVN-Revision: 11364
2008-06-05 16:19:46 +00:00
c2619fb5ab
revert kernel version to 2.6.25.4
...
SVN-Revision: 11273
2008-05-27 06:27:16 +00:00
ac897ce5b1
refresh kernel patches
...
SVN-Revision: 11201
2008-05-19 08:33:22 +00:00
f9719b35c8
upgrade to latest kernel versions (2.6.25.4; 2.6.24.7; 2.6.23.17; 2.6.22.19)
...
SVN-Revision: 11184
2008-05-18 20:12:54 +00:00
12da51bb3c
bcm96345: correct some 6345 specific stuff
...
This fixes some problems with the 6345 support and adds a macro for CPU
identification that is easier on the eyes. The first thing it does is to not
initialize MPI on the 6345 as it does not have PCI. The second thing it does is
to use a static value for the CPU frequency of the 6345 chip to provide an
accurate timer.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11183
2008-05-18 17:32:16 +00:00
ab2b78aabd
bcm963xx: fix cfe detection
...
The CFE detection failed to account for zero termination.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11182
2008-05-18 17:32:05 +00:00
be49888f6c
bcm963xx: add new timer code
...
This basically selects the new generic MIPS timer code for BCM963xx and
simplifies the timer setup code.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11181
2008-05-18 17:31:55 +00:00
f92e4aaf53
bcm963xx: remove obsolete timer code
...
This removes some code that has been deprecated in kernels >= 2.6.24.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11180
2008-05-18 17:31:45 +00:00
4db60563fc
bcm963xx: fix uart isr
...
The ISR ended up in an endless loop because the TX ISR never got used or masked.
This patch basically makes the TX ISR mask the the TX interrupt when it
encounters it, because it doesn't even use the TX interrupt.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11179
2008-05-18 17:31:35 +00:00
ca851edf10
bcm963xx: rewrite irq handling code
...
This patch adds interrupt handling as on AR7. The old code was very messy and
didn't work too well. It also removes the unused file int-handler.S.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11178
2008-05-18 17:31:25 +00:00
289c41604f
bcm963xx: add missing trailing zero to load address
...
The load address for BCM963xx is 0x80010000, not 0xf8001000 as in the current
sources. I think this is just a typo, so this patch fixes it (tested on 96345).
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11177
2008-05-18 17:31:11 +00:00
17d20bb016
bcm963xx: flashmap support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11176
2008-05-18 17:31:02 +00:00
da18b98cff
bcm963xx: serial port support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11175
2008-05-18 17:30:49 +00:00
97b85443eb
bcm963xx: board support
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11174
2008-05-18 17:30:39 +00:00
f94d5eafc9
bcm963xx: add 2.6.25 configuration file
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11173
2008-05-18 17:30:30 +00:00
8e7ff7a673
bcm963xx: use the 2.6.25.1 kernel
...
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11172
2008-05-18 17:30:16 +00:00
2dfabe3991
bcm963xx: image generation using image tagger
...
This adds CFE tagged image generation in the BCM963xx target image Makefile.
It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi.
It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP,
which is based on a slightly older LZMA SDK. Anyways, some of the code is
GPL, some of it is LGPL, so it might be that Broadcom owes some sources.
Also, LZMA has a bug which causes it to generate different output when you
are using stdin / stdout compared to plain files. I've just worked around
the issue by using plain files.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11171
2008-05-18 17:30:04 +00:00
46b4413fbb
bcm963xx: fix load address / kernel entry
...
Current kernels have the same kernel entry as load address, so just set them
like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this
too.
Signed-off-by: Axel Gembe <ago@bastart.eu.org>
SVN-Revision: 11169
2008-05-18 17:29:39 +00:00
e3a42b23c6
enable proper PCI & USB support detection at config-time by disabling CONFIG_PCI & CONFIG_USB entries in generic/config and enabling them on targets where appropriate
...
SVN-Revision: 11097
2008-05-09 17:08:51 +00:00
68943e35c2
upgrade to 2.6.24.5
...
SVN-Revision: 10959
2008-04-28 10:23:36 +00:00
c6fe45ed55
properly disable CONFIG_CRYPTO_HW
...
SVN-Revision: 10952
2008-04-27 12:31:50 +00:00
03f917f26c
Delete config-default file and resync kernel configuration for brcm63xx
...
SVN-Revision: 10790
2008-04-11 14:22:41 +00:00
62240465c4
brcm63xx image generation cleanups ( #3169 )
...
SVN-Revision: 10703
2008-04-01 21:10:47 +00:00
ebf4eb11e9
Upgrade brcm63xx to 2.6.24
...
SVN-Revision: 10455
2008-02-13 17:31:17 +00:00
0a72d14e40
resync kernel config
...
SVN-Revision: 10444
2008-02-11 15:28:45 +00:00
3a0e58b2e1
upgrade & standardize kernel versions
...
SVN-Revision: 10443
2008-02-11 10:50:40 +00:00
3f7af01bb0
fix initramfs
...
SVN-Revision: 10080
2008-01-01 21:38:06 +00:00
1bca0cc517
make the image filenames a bit shorter
...
SVN-Revision: 9533
2007-11-10 23:08:11 +00:00
5f0272d618
move crypto support to a seperate crypto.mk file, split modules into multiple packages and adjust dependencies, sync crypto options in kconfigs.
...
SVN-Revision: 8980
2007-09-23 15:12:12 +00:00
fec4d9ee3c
add missing 2.6 conntrack/nat helpers, add 2.6 conntrack/nat helper for RTSP ( closes : #2297 , thanks to aorlinsk), sync 2.4 / 2.6 kconfigs.
...
SVN-Revision: 8955
2007-09-22 18:37:24 +00:00
236d7e62ca
clean up jffs2 config options
...
SVN-Revision: 8848
2007-09-19 20:58:16 +00:00
87a88cebc7
adapt profiles for subtarget changes
...
SVN-Revision: 8695
2007-09-08 20:04:43 +00:00
a9d683ca91
major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
...
SVN-Revision: 8694
2007-09-08 19:55:42 +00:00
56231056ea
strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
...
SVN-Revision: 8653
2007-09-06 16:27:37 +00:00
Florian Fainelli
Gabor Juhos
Nicolas Thill
Felix Fietkau
Imre Kaloz