eeff1f0a12
ixp4xx: fix beeper module dependencies
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45214
2015-04-01 09:03:13 +00:00
3ec7ccf501
config: add an option to enable KPROBE
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45212
2015-04-01 08:33:04 +00:00
bf7eeea7ee
ipq806x: clean up kernel conf
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45211
2015-04-01 08:32:29 +00:00
d3a9fc4586
ipq806x: add support for 4.0 kernel
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45210
2015-04-01 08:32:03 +00:00
2d74104b52
ipq806x: move 020-add-ap148-bootargs.patch in patches-3.18
...
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45209
2015-04-01 08:31:52 +00:00
449c5f7b30
ramips: Add support for ZTE Q7
...
ZTE Q7 is a wireless router with SD Card,USB,1 ethernet port and a battery.It used MT7620a SoC.
I can,t find any information about this router on ZTE's website.
But I found this : http://en.cctairmobi.com/plus/list.php?tid=40
This router is the same as ZTE Q7 and later I found that both routers are made by the same company:-D
This patch adds support for it.
Because there is only one port,I disabled VLAN and use eth0 as lan port.
I could only create a sysupgrade firmware because I don't know how the orignal webpage check the uploaded image:-(
Signed-off-by: 郭传鈜 <gch981213@gmail.com>
SVN-Revision: 45208
2015-04-01 08:31:46 +00:00
e078fbdacf
kernel: add missing symbols to config and modules
...
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
v2: changes in input.mk broke the patch, some of the CONFIG_SND_*
stuff was added already
SVN-Revision: 45205
2015-04-01 08:31:26 +00:00
bf828d3fd0
bcm53xx: use bcm47xx_nvram.c with the latest patches
...
This will be hopefully a mainline version.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45204
2015-04-01 07:21:59 +00:00
36e10677df
ar71xx: fix platform device support in the gpio-74x164 driver
...
Platform device support has been removed from the gpio-74x164
driver in 3.14. Restore that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45203
2015-03-31 21:31:36 +00:00
9c5aa7c528
brcm47xx: image: share function checking TRX in provided firmware
...
This will allow us to calculate crc32 in a shared code.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45202
2015-03-31 21:16:19 +00:00
f079ad97ce
mvebu: use CONFIG_MANGLE_BOOTARGS
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45200
2015-03-31 19:27:59 +00:00
77f322e0d7
mvebu: add missing a38x dts labels
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45199
2015-03-31 19:23:32 +00:00
9bb302ff9e
generic/4.0: upgrade to 4.0-rc6
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45198
2015-03-31 19:22:28 +00:00
35df52f89f
generic/3.18: upgrade to 3.18.10
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45197
2015-03-31 19:21:13 +00:00
17fb965d6b
generic: add CONFIG_MANGLE_BOOTARGS and disable it by default
...
Enabling this option renames the bootloader supplied root=
and rootfstype= variables, which might have to be know but
would break the automatisms OpenWrt uses.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45196
2015-03-31 19:18:03 +00:00
b9c4dadc11
mvebu: deal with the new path in the fan control script for Linux 4.0+
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45195
2015-03-31 19:12:27 +00:00
82f0308be9
kernel: update yaffs code to the latest version
...
Use the latest version of the yaffs code. Fetched from the
yaffs2 git tree and it is based on the following commit:
commit 7e5cf0fa1b694f835cdc184a8395b229fa29f9ae
Author: Charles Manning <cdhmanning@gmail.com>
Date: Thu Aug 7 11:25:05 2014 +1200
yaffs-direct: Basic tests. Add lpthread flag for background gc support
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45188
2015-03-31 15:31:57 +00:00
ad9f61d3bb
kernel: add a couple missing symbols for 4.0
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45186
2015-03-31 13:23:46 +00:00
090a510576
brcm47xx: image: convert legacy Linksys & Netgear devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45184
2015-03-31 12:44:31 +00:00
4faba3cc2e
brcm47xx: image: convert generic subtarget to the new images system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45183
2015-03-31 12:17:08 +00:00
3d481d31ed
brcm47xx: image: convert all mips74k images to the new building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45181
2015-03-31 11:26:50 +00:00
184c0af4e2
brcm47xx: image: add helpers for defining devices
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45180
2015-03-31 11:26:45 +00:00
a709beb4ae
brcm63xx: fix zyxel kernel name
...
Accidentally left over development artifact.
Reported-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45179
2015-03-31 09:54:15 +00:00
6c1852cb26
brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings
...
KERNEL_IMAGE is used as target rule so reusing the same name causes:
Makefile:326: warning: overriding recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `bin/brcm47xx/vmlinux.lzma'
Makefile:326: warning: overriding recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Makefile:326: warning: ignoring old recipe for target `build_dir/target-mipsel_74kc+dsp2_uClibc-0.9.33.2/linux-brcm47xx_mips74k/vmlinux.lzma'
Unfortunately this will cause copying vmlinux.lzma over and over like:
cp vmlinux.lzma FOO-kernel.bin
which is redundant on brcm47xx where we never modify kernel image.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45178
2015-03-31 08:56:08 +00:00
cc9600a1eb
ar71xx/mikrotik: disable atnoher two non MikroTik boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45177
2015-03-31 08:30:56 +00:00
04ba95f6d3
ar71xx/mikrotik: disable non MikroTik boards
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45176
2015-03-31 07:56:25 +00:00
26800ef074
ar71xx/mikrotik: use correct symbol to disable overlayfs
...
The Kconfig symbol has been changed in 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45175
2015-03-31 07:56:22 +00:00
8ec31f25e3
brcm47xx: fix checking cross-vendors firmware images
...
This change won't allow installing e.g. Netgear firmware on Linksys
device.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45174
2015-03-31 07:26:30 +00:00
463a449f84
brcm47xx: update Linksys firmwares (add new E2500 versions)
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45173
2015-03-31 07:26:22 +00:00
a445846305
brcm47xx: display all errors (not just the 1st one) when checking image
...
This way people forcing upgrade will know what may go wrong.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45172
2015-03-31 06:05:35 +00:00
44dfe17576
brcm47xx: recognize more device specific firmwares
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45171
2015-03-31 05:39:33 +00:00
b34040f990
brcm47xx: compare provided firmware magic with device magic
...
This makes sysupgrade reject firmware images for different devices.
Right now only support for 2 sample devices is implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45170
2015-03-30 22:06:11 +00:00
a54b8303d2
brcm63xx: don't build non-dtb kernels anymore
...
Now that all supported boards have an dts there is no need for a
dtb free kernel anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45169
2015-03-30 20:21:24 +00:00
0f08442ded
brcm63xx: move DSL-275XB to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45168
2015-03-30 20:21:15 +00:00
f77b446051
brcm63xx: move bcm6318 reference boards to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45167
2015-03-30 20:21:07 +00:00
f644c1581a
brcm63xx: move VG50 to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45166
2015-03-30 20:21:01 +00:00
f973580488
brcm63xx: move V2110 to DT
...
Also readd image generation which was accidentally dropped in r43364.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45165
2015-03-30 20:20:49 +00:00
d8ba40cfcd
brcm63xx: use relocate to move the kernel back to start of ram
...
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327 ).
Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45164
2015-03-30 20:20:15 +00:00
8353a3bd45
generic: relocate: make the cacheline size configurable
...
Different targets have different cache line sizes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45163
2015-03-30 20:20:10 +00:00
703c41cf01
ramips: move relocating loader to common location
...
Allow other targets to use it, too.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45162
2015-03-30 20:20:08 +00:00
3129f0c6f2
ar71xx/mikrotik: re-enable 4KiB flash sector erase
...
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45161
2015-03-30 19:57:52 +00:00
62a8665fea
ar71xx: re-enable AR8216_PHY_LEDS
...
The setting has been lost during the transition to 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45160
2015-03-30 18:12:54 +00:00
18f6a34113
ar71xx: sync kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45159
2015-03-30 18:12:50 +00:00
2b925161d8
xburst: add missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45155
2015-03-30 12:47:51 +00:00
7e7f329ccf
kernel/generic: (try) fixing MAP-E patch broken in 4.0
...
Now it at least compiles, otherwise untested.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45145
2015-03-30 08:48:51 +00:00
1751676c8b
brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45144
2015-03-29 19:53:11 +00:00
8e4b74b9fe
brcm47xx: convert Linksys E1200 V2 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45143
2015-03-29 18:15:38 +00:00
23d37c1208
ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC
...
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
after the zero (which wasn't always visible using busybox tools, but could
confuse other scripts)
Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.
The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.
The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.
Fixes #18992 .
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45140
2015-03-29 12:58:01 +00:00
ebf1e2461a
x86_64: add description, maintainership
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45138
2015-03-29 12:17:39 +00:00
661f05262b
arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45132
2015-03-29 07:36:17 +00:00
1e2f88b17b
imx: add initial version of 3.18 support
...
This is build tested only.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45125
2015-03-29 05:48:56 +00:00
375337266d
kernel: add few missing symbols
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45118
2015-03-29 04:50:16 +00:00
d949d88ef6
kernel: add symbol
...
Several targets are not using EMAC_ROCKCHIP so define it in generic config.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45117
2015-03-29 04:43:59 +00:00
e731ea23a8
x86: add myself as maintainer
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45116
2015-03-29 04:32:15 +00:00
196fb76a4c
x86: make x86_64 a subtarget instead of a standalone target
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45115
2015-03-29 04:32:01 +00:00
09aad60610
x86: remove bogus bzImage copy that breaks initramfs+no-initramfs builds
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45114
2015-03-29 04:31:35 +00:00
795e7cf60d
kernel: fix linux/spi/spidev.h portability issues with musl
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45105
2015-03-29 04:28:24 +00:00
9444bc1ee2
kernel: clean up fq_codel default patch
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45104
2015-03-29 04:28:02 +00:00
85b0d25861
adm8668: switch to 3.18
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45095
2015-03-28 18:18:50 +00:00
f51f3ee9bc
adm8668: add 3.18 support
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45094
2015-03-28 18:18:38 +00:00
26cf81b94b
kernel: refresh 3.18 patches
...
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 45093
2015-03-28 18:17:46 +00:00
0b13d69bba
arm64: update to linux 3.18
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45092
2015-03-28 13:38:52 +00:00
693e5aae41
brcm63xx: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45089
2015-03-28 13:21:09 +00:00
130acd0f4c
mxs: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45088
2015-03-28 13:21:04 +00:00
b63aa281ee
rb532: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45087
2015-03-28 13:20:58 +00:00
56c580f5f4
uml: remove linux 3.14 support
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45086
2015-03-28 13:20:52 +00:00
7427007193
x86: remove the olpc subtarget, it has been unmaintained for a long time
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45083
2015-03-28 11:37:08 +00:00
518d2b90e6
iop32x: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45082
2015-03-28 10:44:55 +00:00
22b38f145d
cobalt: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45081
2015-03-28 10:44:49 +00:00
04182658ef
sibyte: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45080
2015-03-28 10:44:44 +00:00
e38b78926a
sparc: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45079
2015-03-28 10:44:37 +00:00
40c5bee0cd
cns21xx: moved to targets feed
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45078
2015-03-28 10:44:31 +00:00
65c567da13
rb532: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45073
2015-03-27 21:22:22 +00:00
2daa34da02
rb532: align partitions to 128KB
...
because block2mtd wants "erasesize must be a divisor of device size" since 3.15
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45072
2015-03-27 21:22:17 +00:00
c2d1ad30e8
rb532: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45071
2015-03-27 21:22:10 +00:00
85bf288428
lantiq: remove arphaned folder
...
the new buildbot was picking this up as a valid target.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45068
2015-03-27 19:47:22 +00:00
ddb5ab2acf
ralink: mt7621 add ECHI OCHI XCHI support
...
Lets hope that this time it won't break the other ralink targets.
Signed-off-by: wengbj <fl.service@t-firefly.com>
SVN-Revision: 45067
2015-03-27 19:07:29 +00:00
c6a29d2528
gemini: fix usb driver compilation on 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45065
2015-03-27 16:03:16 +00:00
19db04e699
mxs: update dtb path in image Makefile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45056
2015-03-27 02:35:11 +00:00
f76a85515a
ar71xx: add missing id for WNR2000v3 image ( fixes #18959 )
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45054
2015-03-27 00:35:34 +00:00
a077e4af96
mxs: bump to 3.18
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45053
2015-03-26 23:35:50 +00:00
01748fbce2
mxs: add sdcard image builder
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45052
2015-03-26 23:34:43 +00:00
39370cbe25
mxs: enable uboot-mxs-duckbill build for duckbill profile
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45044
2015-03-26 23:04:27 +00:00
3012319505
generic: drop old kirkwood mach types
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45043
2015-03-26 22:48:31 +00:00
1f26498751
mxs: add 3.18 support
...
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 45041
2015-03-26 22:18:47 +00:00
65708f749a
gemini: make dd commands more portable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45039
2015-03-26 20:37:19 +00:00
6cda886f60
gemini: switch mantainer to myself
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45038
2015-03-26 20:37:09 +00:00
17532417c7
gemini: nuke 3.10 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45037
2015-03-26 20:36:59 +00:00
b953a14036
gemini: remove broken flag
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45036
2015-03-26 20:36:49 +00:00
dc622768a7
gemini: switch to 3.18
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45035
2015-03-26 20:36:40 +00:00
44b3e3af17
gemini: don't build jffs2 image for Raidsonic board
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45034
2015-03-26 20:36:35 +00:00
a304f3d2b6
gemini: add 3.18 support
...
Signed-off-by: Roman Yeryomin <roman@advem.lv>
SVN-Revision: 45033
2015-03-26 20:36:30 +00:00
b18f5eb44a
xburst: Update to 3.18
...
Update the xburst target to kernel version 3.18 and also remove the broken 3.10 support.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
SVN-Revision: 45031
2015-03-26 19:46:01 +00:00
c25bf32f8d
ar71xx: fix image size checks for WNDR3700
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45030
2015-03-26 18:50:44 +00:00
40d25d3eb5
ralink: drop xhci patch, it break !mt7621 builds
...
will re-add it tomorrow after fixing it
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45028
2015-03-26 16:24:19 +00:00
2cedb63d84
ralink: the xhci patch broke ehci Signed-off-by: John Crispin <blogic@openwrt.org>
...
SVN-Revision: 45027
2015-03-26 14:49:26 +00:00
f6eff33b8d
mvebu: fixup usb3 support on the a38x
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45026
2015-03-26 14:32:45 +00:00
4bac1253c1
generic/4.0: upgrade to 4.0-rc5
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45025
2015-03-26 14:06:42 +00:00
23b880b373
mvebu: add a coherency fix which didn't make it to -stable, yet
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45024
2015-03-26 13:52:21 +00:00
21e0f98903
ralink: add default pinctrl node for mt7621 eval kit
...
fixes #19213
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45022
2015-03-26 12:23:02 +00:00
John Crispin
Rafał Miłecki
Gabor Juhos
Imre Kaloz
Zoltan Herpai
Jonas Gorski
Steven Barth
Felix Fietkau
Luka Perkov
Florian Fainelli
Lars-Peter Clausen