55aeabae10
add an initial (experimental) version of netifd, disabled by default
...
SVN-Revision: 28499
2011-10-21 01:47:49 +00:00
c2b5767572
base-files: move network related scripts to a separate package to make the transition to netifd easier
...
SVN-Revision: 28495
2011-10-20 15:01:06 +00:00
59c13202e0
base-files: introduce "igmp_snooping" option to toggle IGMP snooping on bridge interfaces
...
SVN-Revision: 28412
2011-10-11 13:43:08 +00:00
bfbbe5893f
base-files: use "zonename" system option to symlink /etc/localtime via /tmp/localtime to /usr/share/zoneinfo for glibc and eglibc
...
SVN-Revision: 28306
2011-09-26 02:28:04 +00:00
41838f4585
base-files: make ip matching in dns add/remove functions more explicit, avoids overmatching pairs like 1.2.3.35 and 1.2.3.3
...
SVN-Revision: 28291
2011-09-23 08:35:50 +00:00
aab33e2e9a
base-files: fix arp() procedure to properly detect /usr/bin/arp
...
SVN-Revision: 27965
2011-08-12 14:34:39 +00:00
94c728dc39
base-files: use "reboot -f" after sysupgrade to prevent executing deleted init scripts
...
SVN-Revision: 27776
2011-07-25 22:19:55 +00:00
365f76551a
base-files: attempt bring up related wifi devices when calling ifup If a user invoked /sbin/ifup to bring up an interface, the setup used to fail in case of wireless networks tied to a non-bridged interface definition. Likewise, the bringup of "lan" in the default configuration will reinitialize the bridge but do not re-join the wireless network to it, requiring an extra call to /sbin/wifi (which might not be possible anymore due to a severed link if connected wirelessly).
...
The changeset modifies the "ifup" command to search for related wireless
devices and call "wifi up" on them if applicable. This way the commands for
wireless and non-wireless interfaces are unified from a cli point of view.
The "ifup -a" case has not been changed to keep the logic of the
/etc/init.d/network boot sequence. This might be changed later.
Solves #9763 .
SVN-Revision: 27720
2011-07-22 00:21:20 +00:00
0de28706ca
base-files: implement a generic mechanism to map per-interface sysctls to uci. - option ipv4_xyz is mapped to /proc/sys/net/ipv4/{conf,neigh}/xyz - option ipv6_xyz is mapped to /proc/sys/net/ipv6/{conf,neigh}/xyz This allows e.g. "option ipv6_proxy_ndp 1" to enable NDP proxying on wan. Fixes ticket #8699 .
...
SVN-Revision: 27653
2011-07-17 17:10:30 +00:00
1e34c02e3e
base-files: add -h and --help options to sysupgrade ( #9728 )
...
SVN-Revision: 27630
2011-07-17 09:27:14 +00:00
e0e6d1029e
base-files: use uci_toggle_state() to prevent unwanted aggregation of state vars ( #9711 )
...
SVN-Revision: 27616
2011-07-15 14:57:44 +00:00
0a7a73261a
base-files: do not use the relinked libgcc, fixes c++ exception handling issues ( #9185 )
...
SVN-Revision: 27347
2011-07-02 06:50:15 +00:00
28fbd7470d
add gfortran compiler support ( #9600 , patch from Xiangfu Liu via Qi hardware)
...
SVN-Revision: 27262
2011-06-23 11:46:24 +00:00
fd8ec24187
base-files: if an ip6addr without a prefix is given, assume /128 - otherwise the busybox utilities will interpret it as /0 and create an invalid default route
...
SVN-Revision: 27145
2011-06-09 12:25:48 +00:00
97ee10d691
base-files: fix error reporting for unsupported protocols on virtual interfaces
...
SVN-Revision: 27132
2011-06-07 23:25:43 +00:00
9b8a5e604a
base-files: mark /etc/crontabs/ as config directory
...
SVN-Revision: 26986
2011-05-24 09:27:23 +00:00
ed8f726dab
ipcalc.sh CIDR notation Hi,
...
the attached patch makes ipcalc.sh accept IP/Netmask combinations in
CIDR notation. Before you could only do:
# sh ipcalc.sh 192.168.0.0 255.255.255.0 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
with this patch you can also execute it with:
sh ipcalc.sh 192.168.0.0/24 1 10
IP=192.168.0.0
NETMASK=255.255.255.0
BROADCAST=192.168.0.255
NETWORK=192.168.0.0
PREFIX=24
START=192.168.0.1
END=192.168.0.11
The patch is based on #1260 [1], i just changed one line to calculate
the START end END ips right. I wonder why that never got included. If
there is no reason not to do i would like to ask you to commit that
patch, because its a functionality i (and probably others) miss quite often.
Btw, i also fixed 4 useless tabs, that might look a bit strange in the
patch.
Regards, Manuel
SVN-Revision: 26930
2011-05-18 09:50:06 +00:00
ba1c1e9016
base-files: retrigger usb coldplug after module loading, solves usb_modeswitch on boot and possibly others ( #9352 )
...
SVN-Revision: 26848
2011-05-08 10:25:58 +00:00
144bee2090
base-files: fix stale space in eglibc library install section ( #9270 )
...
SVN-Revision: 26720
2011-04-19 13:18:39 +00:00
2f6361832e
base-files: return success on lib-copying with external toolchain when using an external toolchain the base-files package copies libc, libgcc and others from the library directory.
...
The file list is given as following in the .config:
CONFIG_LIBC_FILE_SPEC="./lib/ld{-*.so,-linux*.so.*} ./lib/lib{anl,c,cidn,crypt,dl,m,nsl,nss_dns,nss_files,resolv,util}{-*.so,.so.*}"
Because the filenames are composed with different endings, not all files exist
and will be skipped. Currently, this works only if the last composed file
(util.so.*) really exists. At the moment this works - but only if you don't add
a new file like 'uClibc'.
Adding it at the end '...resolv,util,uClibc}{-*.so,.so.*}' will lead to this
message, because the combination 'libuClibc.so.*' doesn't exist and Make will
evaluate the last copy statement of the for loop.
2011-04-12 20:37:43 +00:00
fe8b9d5232
base-files: properly handle vlans on top of wireless interfaces
...
SVN-Revision: 26230
2011-03-18 18:24:51 +00:00
629e73938e
base-files: update sysctl.conf for modern kernels
...
SVN-Revision: 26204
2011-03-17 15:35:41 +00:00
4bcca969dc
base-files: link libpthread against libc
...
SVN-Revision: 26161
2011-03-14 19:27:45 +00:00
e8491ab2a5
base-files: make library relinking uclibc specific and fix libpthread installation for the non-relinked variant
...
SVN-Revision: 26003
2011-03-10 12:27:46 +00:00
32d8fac477
base-files: only relink libraries if the linaro toolchain is selected
...
SVN-Revision: 25983
2011-03-09 20:36:29 +00:00
e52b720870
gcc: move the optimized assembler helpers back into the static libgcc and skip relinking for this arch. due to relocation constraints, the assembler functions cannot be in the shared libgcc and must always be linked in statically
...
SVN-Revision: 25952
2011-03-08 13:10:11 +00:00
357018e7e5
base-files: the relinked libpthread needs to be linked against libdl, otherwise calls to dlopen() fail ( fixes #8978 )
...
SVN-Revision: 25950
2011-03-08 12:48:36 +00:00
0b9cfab2a2
base-files: fix Build/Compile override handling, fixes ar7 compile
...
SVN-Revision: 25911
2011-03-06 22:36:42 +00:00
4e155b5283
base-files: do not build or use libgcc on m68k and avr32
...
SVN-Revision: 25852
2011-03-03 14:50:00 +00:00
1cc0bcfffc
base-files: relink uclibc and libgcc libraries to remove leftovers of the statically linked initial libgcc saves a few kb and gets rid of unused not exported functions as well should also improve the reliability of mklibs
...
SVN-Revision: 25800
2011-03-01 05:40:38 +00:00
090c042089
base-files: Add /etc/nsswitch.conf to targets running glibc/eglibc, otherwise name resolution fails
...
SVN-Revision: 25568
2011-02-18 10:37:26 +00:00
e5e6dfe384
base-files: librt should depend on libpthread, not the other way around
...
In uClibc 0.9.32 as well as recent versions of glibc and eglibc, librt
depends on libpthread.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25548
2011-02-16 02:42:24 +00:00
c672eeffc9
remove the shared object stubs of libnsl and libresolv - let the compiler use the static variants instead
...
SVN-Revision: 25511
2011-02-13 03:26:10 +00:00
875ff44592
base-files: - properly disable IPv6 on bridge ports - introduce accept_ra option, defaults to true for dhcp interfaces, false for others - introduce send_rs option, defaults to true for static interfaces, false for others
...
SVN-Revision: 25454
2011-02-11 00:39:11 +00:00
b33ce3109d
base-files: remove remaining conffiles reference to /etc/banner
...
SVN-Revision: 25368
2011-02-04 23:05:12 +00:00
25feec0c9c
package/base-files: add get_magic_long() to common upgrade script
...
Patch-by: Mark Mentovai <mark@moxienet.com>
SVN-Revision: 25117
2011-01-26 20:35:37 +00:00
f93b6cb844
base-files: Fix typo in option name for disabling failsafe announcment Thanks to Andrey Zholos for this patch
...
SVN-Revision: 25040
2011-01-18 14:46:25 +00:00
3b6851aa82
base-files: implement "reqopts" parameter for dhcp interfaces to specify additional dhcp options to request
...
SVN-Revision: 24780
2010-12-22 07:20:24 +00:00
63c786dde7
base-files: add support for the usbdev LED trigger
...
SVN-Revision: 24647
2010-12-17 17:10:14 +00:00
ebe7bdba88
adds a --help option to /sbin/wifi
...
Signed-off-by: Sebastian Philipp <sebastian@spawnhost.de>
SVN-Revision: 24258
2010-12-05 11:22:56 +00:00
d0ab35c115
base-file: add metric option for static and dhcp protos, this simplifies the management of multiple default routes
...
SVN-Revision: 24020
2010-11-17 19:11:50 +00:00
59a3841c9c
base-files: mark libc as hold and essential, opkg should now bail out if someone tries to uninstall libc
...
SVN-Revision: 23960
2010-11-11 16:18:58 +00:00
cfe4db7bda
base-files: mark /etc/shadow as conffile
...
SVN-Revision: 23590
2010-10-23 15:49:04 +00:00
d856ed78ad
base-files: add udhcpc vendorid option ( #7744 )
...
SVN-Revision: 23279
2010-10-06 21:21:28 +00:00
8dc04c9018
base-files: mark /etc/sysupgrade.conf as conffile
...
SVN-Revision: 23264
2010-10-05 22:08:23 +00:00
d80f82d7a4
base-files: - add sysupgrade support for keepfile hints * introduces /lib/upgrade/keep.d/ for per-package keepfile lists * introduces /etc/sysupgrade.conf for user defined keepfile hints - prime /lib/upgrade/keep.d/base-files-essential to keep sysupgrade usable for images without opkg - change sysupgrade to build the keepfile list from /lib/upgrade/keep.d/, /etc/sysupgrade.conf and opkg list-changed-conffiles
...
SVN-Revision: 23258
2010-10-05 19:24:12 +00:00
978ecae685
base-files: sysupgrade: merge info from "opkg list-changed-conffiles" to backup file list
...
SVN-Revision: 23233
2010-10-05 07:40:25 +00:00
a65975e0d6
base-files: mark /etc/rc.local as conffile
...
SVN-Revision: 23232
2010-10-05 07:32:37 +00:00
0fda5f7507
base-files: utilize uci_get_state to read the previous dhcp router address in udhcpc default script. The setup_switch() procedure provided by swconfig calls config_load() during network restart and thus confuses udhcpc's uci state keeping resulting in a missing default route on each second network restart. Bypass the cached state vars and query uci directly to make the script immune against unwanted runtime changes.
...
SVN-Revision: 23211
2010-10-04 00:07:07 +00:00
cdd98e3f3a
base-files: bump pkg revision after r23091, r23092
...
SVN-Revision: 23093
2010-09-19 15:14:42 +00:00
Felix Fietkau
Jo-Philipp Wich
Hamish Guthrie
Gabor Juhos
Daniel Dickinson
Florian Fainelli